YXYang Xiang

Yang Xiang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yang Xiang has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    DCFP-YOLO: A Dual-Backbone Feature Fusion Network for Multi-Pose Chili Flower Recognition and Edge Deployment

    by Minqiu Kuang, Xiaojian Li, Fangping Xie, Shang Chen, Dawei Liu, Yang Xiang, Bei Wu, Feng Liu, Yuxuan Zhang, Xu Li

    To address the challenges of difficult feature extraction and insufficient recognition accuracy caused by the small size of chili flowers, occlusion by branches and leaves, and illumination variations in complex field environments, a dual-backbone-based chili flower pose estimation algorithm, termed DCFP-YOLO, is proposed. Built upon the YOLO11n framework, the proposed method performs classification and recognition of five typical upward-oriented chili flower poses. To alleviate the loss of local detail features of small chili flowers under complex backgrounds, a dual-backbone feature extraction network composed of StarNet and ShuffleNetV2 is constructed. Specifically, the StarNet backbone enhances the extraction of fine-grained local features from key floral regions, while the ShuffleNetV2 backbone improves the perception of global spatial structural information. The complementary fusion of dual-backbone features strengthens the representation capability of chili flower pose features in complex environments. To mitigate the attenuation of shallow detail information during multi-scale feature transmission, a Bidirectional Multi-branch Auxiliary Feature Pyramid Network (BiMAFPN) is designed to enhance feature propagation through cross-scale feature interaction, thereby improving pose recognition performance under occlusion and overlapping conditions. Furthermore, a Programmable Gradient Information (PGI)-assisted training mechanism is introduced to optimize gradient propagation paths and alleviate information bottlenecks in deep networks, thereby enhancing the robustness of multi-pose feature extraction under occlusion, blur, and complex illumination conditions. Experimental results demonstrate that DCFP-YOLO achieves recall, mAP50, and mAP50 values of 87.4%, 92.0%, and 66.9%, respectively, representing improvements of 1.7, 1.3, and 3.5 percentage points over the baseline model. Overall performance surpasses that of current mainstream object detection algorithms. After deployment on the NVIDIA Jetson AGX Orin platform, the model achieves an inference speed of 20.9 frames/s, which can basically satisfy the real-time perception requirements of chili flower pose recognition in complex agricultural environments. The proposed method provides an effective visual perception framework for chili flower pose recognition in complex agricultural environments. Rather than constituting a complete robotic pollination solution, the developed model serves as a potential perception component for future intelligent pollination robotic systems, providing reliable flower pose information for subsequent research on target localization, end-effector alignment, and robotic pollination in unstructured greenhouse environments.


  • Open Access

    Localization of Agricultural Mobile Robot Based on Two UWB Tags and Heading Angle L2IB System

    by Wenwu Hu, Haiying Zhu, Yahui Luo, Ping Jiang, Yang Xiang, Yue Hu, Huan Yang, Changsheng Yu, Xiangjun Zou, Guoshun Yang

    The dense tree canopy in the complex orchard environment obstructs wireless positioning signals and generates NLOS interference, which reduces the positioning accuracy of agricultural mobile robots. This study investigates a localization method for agricultural mobile robots based on two UWB tags and an electronic compass. By analyzing the NLOS interference factors and error sources of UWB, a method for NLOS interference suppression and positioning correction employing two UWB tags tightly coupled with heading angle was proposed. The construction of the heading angle L2IB system and its comprehensive process were also introduced as follows. The proposed method constructs candidate localization domains for dual UWB tags based on multilateration and integrates the inter-tag distance and heading-angle constraints within an L2IB framework to suppress NLOS-induced errors and estimate the robot center position. Experiments were performed under four simulated scenarios, namely line-of-sight (LOS), single-anchor occlusion, multi-anchors occlusion, and single-tag occlusion. The proposed method was compared with the centroid and least-squares methods. The results demonstrate that the L2IB method effectively improves localization accuracy under NLOS conditions. Specifically, in the single-tag NLOS interference scenario, the MAE, RMSE, and maximum localization error were 3.7, 4.0, and 6 cm, respectively. These results indicated that the system could meet the positioning needs of most NLOS environments in the orchard. Therefore, the proposed method exhibits feasibility and provides a new alternative for high-precision localization of mobile robots in orchards under NLOS conditions.

  • Open Access

    Localization of Agricultural Mobile Robot Based on Two UWB Tags and Heading Angle L2IB System

    by Wenwu Hu, Haiying Zhu, Yahui Luo, Ping Jiang, Yang Xiang, Yue Hu, Huan Yang, Changsheng Yu, Xiangjun Zou, Guoshun Yang

    The dense tree canopy in the complex orchard environment obstructs wireless positioning signals and generates NLOS interference, which reduces the positioning accuracy of agricultural mobile robots. This study investigates a localization method for agricultural mobile robots based on two UWB tags and an electronic compass. By analyzing the NLOS interference factors and error sources of UWB, a method for NLOS interference suppression and positioning correction employing two UWB tags tightly coupled with heading angle was proposed. The construction of the heading angle L2IB system and its comprehensive process were also introduced as follows. The proposed method constructs candidate localization domains for dual UWB tags based on multilateration and integrates the inter-tag distance and heading-angle constraints within an L2IB framework to suppress NLOS-induced errors and estimate the robot center position. Experiments were performed under four simulated scenarios, namely line-of-sight (LOS), single-anchor occlusion, multi-anchors occlusion, and single-tag occlusion. The proposed method was compared with the centroid and least-squares methods. The results demonstrate that the L2IB method effectively improves localization accuracy under NLOS conditions. Specifically, in the single-tag NLOS interference scenario, the MAE, RMSE, and maximum localization error were 3.7, 4.0, and 6 cm, respectively. These results indicated that the system could meet the positioning needs of most NLOS environments in the orchard. Therefore, the proposed method exhibits feasibility and provides a new alternative for high-precision localization of mobile robots in orchards under NLOS conditions.

  • Open Access

    Real-time monitoring of pepper harvesting loss using lightweight vision model

    by Pengcheng Du, Wei Han, Yulong Xu, Wenwu Hu, Yang Xiang

    Real-time monitoring of pepper losses during mechanized harvesting is essential for optimizing operational parameters and reducing yield loss. However, accurate detection of fallen peppers in field environments remains challenging due to heavy dust interference and complex backgrounds.To address these issues, this study proposes a robust vision-based monitoring method that integrates image enhancement and lightweight object detection. First, the Dark Channel Prior (DCP) algorithm is applied to reduce dust effects and restore image clarity under degraded field conditions. Then, an improved YOLOv8n-based model, termed Pepper_YOLOv8n, is developed by optimizing the neck structure and incorporating the SimAM attention mechanism together with the Self-Calibrated Illumination Network (SCINet) module, thereby enhancing feature representation for small and partially occluded targets.Experimental results show that the proposed model achieves a precision of 90.1%, recall of 89.7%, and an mAP of 96.8%. Compared with the baseline YOLOv8n, recall and mAP are improved by 4.0% and 1.9%, respectively, while the inference time is reduced by 1.5 ms on a workstation.To further validate its practical applicability, a real-time edge detection system is developed based on the D-Robotics RDK X5 platform. With post-training quantization (PTQ), the deployed model reduces computational complexity (FLOPs decreased by 3.6G) and achieves an inference speed of 18.2 ms per frame, meeting the requirements for real-time monitoring during field harvesting operations.The proposed method provides an effective solution for intelligent monitoring of harvesting losses and offers practical support for precision agriculture and smart agricultural machinery.

  • Open Access

    Ridge navigation line extraction for rapeseed transplanters based on R-YOLOv11-Prune

    by Wei Han, Yang Xiang, Mingliang Wu, Yong Zeng, Ruikun Zou, Xiaohu Jiang, Wei Quan


  • Open Access

    Detection and Positioning of Camellia oleifera Fruit Based on LBP Image Texture Matching and Binocular Stereo Vision

    by Xiangming Lei, Mingliang Wu, Yajun Li, Anwen Liu, Zhenhui Tang, Shang Chen, Yang Xiang

    To achieve the rapid recognition and accurate picking of Camellia oleifera fruits, a binocular vision system composed of two industrial cameras was used to collect images of Camellia oleifera fruits in natural environments. The YOLOv7 convolutional neural network model was used for iterative training, and the optimal weight model was selected to recognize the images and obtain the anchor frame region of the Camellia oleifera fruits. The local binary pattern (LBP) maps of the anchor frame region were extracted and matched by using the normalized correlation coefficient template matching algorithm to obtain the positions of the center point in the left and right images. The recognition experimental results showed that the accuracy rate, recall rate, mAP and F1 of the model were 97.3%, 97.6%, 97.7% and 97.4%. The recognition rate of the Camellia oleifera fruit with slight shading was 93.13%, and the recognition rate with severe shading was 75.21%. The recognition rate of the Camellia oleifera fruit was 90.64% under sunlight condition, and the recognition rate was 91.34% under shading condition. The orchard experiment results showed that, in the depth range of 400–600 mm, the maximum error value of the binocular stereo vision system in the depth direction was 4.279 mm, and the standard deviation was 1.142 mm. The detection and three-dimensional positioning accuracy of the binocular stereo vision system for Camellia oleifera fruits could basically meet the working requirements of the Camellia oleifera fruit-picking robot.


  • Open Access

    Numerical Simulation and Optimization of the Airflow Field of a Forage Drum Mower

    by Bei Wu, Tianlin Zuo, Zhuo Li, Huaiyuan Qian, Tianci Huang, Yang Xiang

    The repeated cutting of forage can cause grass breakage and affect the performance of the forage drum mower in harvesting forage. Also, it is worth paying attention to the effect of airflow around the cutter on the cutting and feeding processes. To explore the characteristics of the airflow field around the cutter and optimize the key parameters of the airflow, an analysis of the airflow field of the forage drum mower equipped with twisted blades, tilting discs, and guide plates was conducted through numerical simulation. Furthermore, an orthogonal experiment was carried out by using the numerical simulation model. According to the experimental results, the optimal velocity of the airflow for gathering, lifting, and feeding was reached when the disc speed was 2000 r/min, the blade twist angle was 8°, the disc tilt angle was 4°, and the number of guide plates was 2. On this basis, a prediction model of airflow parameters was constructed, and the parameters of airflow around the cutter were measured on a test bench. According to the measurement results, the results of prediction by the model were consistent with the simulation results. Also, compared with the data of airflow measurement, the average error of the model prediction value was −5.83% for the velocity of the gathering airflow, 2.37% for the velocity of the lifting airflow, and 4.20% for the velocity of the feeding airflow, which demonstrates the reliability of the simulation results and prediction model. The results of this research provide a practical reference for the optimal design of the forage drum mower.