FJFengrui Jia

Fengrui Jia

*This is an algorithmically generated author record based on publicly available information.

Fengrui Jia has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modification of Copper Benzene-1,3,5-tricarboxy Late (Cu-BTC) Composites with Multiwalled Carbon Nanotubes and Amino Groups for Enhanced CO2/CH4 Selective Adsorption Performance and Water Stability

    by Weiwei Jian, Qiuyan Hai, Adili Youlidaxi, Tianqiang Liu, Danzhu Ma, Fengrui Jia

    CNT-NH2-Cu-BTC was prepared via hydrothermal synthesis for the adsorption and separation of CO2/CH4 mixtures with 2, 6, and 10% multiwalled carbon nanotube (MWCNT) additions. NH2-BTC composites were synthesized by changing the organic ligand and adding NH2-BDC (15, 25, 35, and 45%) to improve the adsorption capacity. MWCNTS were loaded to enhance the water stability of the material. The structure, surface morphology, and pore size distribution of the composites were characterized using X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and specific surface area and pore structure measurements. The CO2/CH4 selective adsorption performance was studied via breakthrough experiments using a self-made adsorption device. The CO2 adsorption capacity of Cu-BTC increased due to the addition of NH2-BDC, with 35%NH2-Cu-BTC exhibiting the best CO2 adsorption property, i.e., a CO2 adsorption capacity of 1.82 mmol/g and a CO2/CH4 separation coefficient of 1.44 at 35 °C and 20 mL/min. After adding MWCNTs, 6%CNT-NH2-Cu-BTC exhibited the best CO2 adsorption property and water stability, with the CO2 adsorption capacity increasing to 2.06 mmol/g. 6%CNT-NH2-Cu-BTC with wet impregnation retained 79% of the CO2 adsorption capacity of the sample without wet impregnation, demonstrating its excellent water stability under humid conditions. Cyclic experiments with and without wet impregnation were performed.


  • Open Access

    Asymmetric Flow Control in a Slab Mold through a New Type of Electromagnetic Field Arrangement

    by Yanming Bao, Zhuang Li, Lintao Zhang, Junxia Wu, Danzhu Ma, Fengrui Jia

    This research aims to investigate the control effect of asymmetric flow in a slab mold using a novel magnetic field arrangement: freestanding adjustable combination electromagnetic brake (FAC-EMBr). Three scenarios (submerged entry nozzle moves to the narrow face, wide face of the slab mold, and rotates 10°) were studied using three-dimensional numerical simulation. The results show that the magnetic field generated by the FAC-EMBr system can effectively cover three key zones in mold and that the magnetic flux density in the zone cover by a vertical magnetic pole can be adjusted according to the actual flow condition. The FAC-EMBr can effectively improve the asymmetric flow in a mold and near the narrow surface caused by the asymmetric arrangement of the nozzle and can effectively inhibit the occurrence of the flow deviation phenomenon and stabilize the steel/slag interface fluctuation. At the same time, FAC-EMBr has obvious inhibition effects on the surface velocity and can optimize the asymmetric distribution of the surface velocity and the upper reflux velocity caused by the asymmetric arrangement of the nozzle. This study can provide theoretical evidence for the development and utilization of a new electromagnetic brake technology.


  • Open Access

    Study on Photocatalytic Desulfurization and Denitrification Performance of Cu- and Cr-Modified MWCNT

    by Yi Sun, Weiwei Jian, Siqi Tong, Danzhu Ma, Bohan Zhuang, Fengrui Jia

    Carbon nanotubes are a promising adsorbent for desulfurization and denitrification. In this paper, Cu- and Cr-doped TiO2 supported by multi-walled carbon nanotubes (MWCNTs/Cu-Cr-TiO2) were synthesized by the sol-gel method. Characterizations of the samples were performed by TEM, XPS, XRD, DRS, and BET. The experiments of simultaneous desulfurization and denitrification were conducted in a fixed-bed reactor. The results showed that the adsorbent with a Cu to Cr molar ratio of 3 displays excellent adsorption property. The SO2 and NO adsorption capacity of MWCNTs/Cu-Cr-TiO2 (Cu/Cr = 3) were 36.83 and 12.34 mg/g under the optimal experimental operating parameters (SO2 content: 1575 mg/m3, NO content 736 mg/m3, O2 content 8%, H2O content 5%, and space velocity 1003 h−1). The adsorption capacity of MWCNTs/Cu-Cr-TiO2 was significantly better than that of the adsorbent doped with Cu or Cr alone (MWCNTs/Cu-TiO2 and MWCNTs/Cr-TiO2). Compared with single metal doping, bimetallic multivalent states accelerate the electron migration and separation from holes, which increase the number of oxygen vacancies and enhance the adsorption of SO2 and NO. The kinetic models and the reaction mechanism of the desulfurization and denitrification were also analyzed in this work.