Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Scott McAvoy has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Collaborative Classification of Large-Scale Point Clouds in the Web Browser

    by Aviral Agarwal, Scott McAvoy, Jordan Pierce, Falko Kuester

    Manual annotation remains the source of ground truth for point cloud semantic classification, but its tools assume a contributor who can download billions of points and run desktop software. We present a browser-based framework that lets contributors classify remotely hosted datasets they neither own nor download. Points are labeled with a volumetric brush, and only the octree nodes the brush boundary crosses are fetched: regions fully inside are classified without being loaded, so the cost of a stroke follows its boundary rather than the points it encloses. Edits are held in a small ledger file, separate from the source data, that survives the discarding and reloading of points a streaming viewer performs and can be applied back to the source files at any time. Contributors receive disjoint regions as URLs and work asynchronously, returning ledgers that a project manager merges; classified subsets can also be exported as tiled LAS/LAZ. Class schemas are user-defined and travel with the edits. Where geometry alone is ambiguous, contributors label through pose-registered survey photographs. We demonstrate the framework on cultural heritage stonework, post-fire aerial LiDAR, and coral reef photogrammetry. It is open-source and deployed in production across OpenHeritage3D, the ALERTCalifornia Atlas Archive, and OpenOcean3D.

  • Open Access

    Detail Versus Certainty: A Metric Multi-Source Reconstruction of the Temple of Bel, Palmyra

    by Scott McAvoy, Wissam Wahbeh, Fabio Menna, Erica Nocerino, Aviral Agarwal, Falko Kuester

    The Temple of Bel in Palmyra, Syria, was destroyed by insurgents in August 2015 after standing for nearly two millennia. This paper presents a new high-resolution digital reconstruction integrating three heterogeneous datasets: terrestrial laser scanning (TLS) captured by Kiyohide Saito in 2010, spherical panoramic imagery from Gabriele Fangi in 2010, and approximately 1580 crowdsourced tourist photographs spanning 1974–2014 from the #NewPalmyra project. We describe a hierarchical alignment methodology that preserves metric accuracy by sequentially registering data sources in order of decreasing geometric fidelity, and document adaptive reconstruction strategies developed in response to observed artifacts when fusing depth sources of disparate resolution. Across the fusion sequence, texture resolution roughly doubles (optimal texel from 33 to 14 mm exterior, 7.1 to 3.7 mm interior) while geometric agreement with the laser moves the other way: from the 6 mm baseline of simply meshing the laser data on the exterior to roughly 3–4 cm once the crowdsourced frame photography is fused in. The laser-and-panorama core stays within the laser’s detection limit, and the geometric cost arrives only with the crowdsourced frame photography. We further find that internal photogrammetric quality metrics do not predict external accuracy: the lowest-reprojection stage is not the most faithful to the laser, and the panorama stage whose surface best matches the laser carries the highest reprojection of all. All primary datasets are published as independent, citable records and served through a web-based environment for full-resolution comparative analysis without specialized software. The reconstruction is presented not as a finished artifact but as an extensible framework for continued development, in which each dataset, stage, and component remains an independently citable, recomposable layer that future imagery and methods can refine.

  • Open Access

    Volumetric Impact Characterization of the 2025 Palisades and Eaton Fires Using Aerial LiDAR

    by Scott McAvoy, Aviral Agarwal, Neal Driscoll, Falko Kuester

    In January 2025, the Palisades and Eaton fires overtook large swaths of Los Angeles County, covering a combined area of approximately 152 km2, composed of diverse coastal, urban, and forested environments. Aerial Light Detection and Ranging (LiDAR) surveys were commissioned directly following these fires, and compared against previously unreleased foundational LiDAR surveys captured in 2023 and 2024. The timeliness of these surveys presents a unique opportunity to approach large-scale damage characterization metrologically at sub-meter resolution. Cell-based height differencing across 367 million change-detected cells (on a 0.5 m grid) identifies 49.5 km2 of vegetation loss and 1.66 km2 of building footprint destruction in the Palisades fire, and 24.3 km2 of vegetation loss and 1.48 km2 of building footprint destruction in the Eaton fire. From the resulting volumetric loss inventory, we derive bottom-up carbon emission estimates of 255±61 kt C for the Palisades fire and 162±38 kt C for the Eaton fire. The Eaton estimate agrees to within 6% of an independent atmospheric inversion estimate derived from ground-based sensor networks, well within the propagated uncertainty of either method, providing an independent cross-validation, at the total-emission level, between LiDAR-based and atmospheric-inversion approaches to wildland–urban interface fire emissions. This paper details the segmentation and characterization methodology, and coincides with ALERTCalifornia’s public release of all described raw and derivative datasets.


  • Open Access

    3D Radiometric Thermography Mosaics with Low-Cost Mobile Sensor Stack

    by Scott McAvoy, Jonathan Klingspon, Adrian Tong, Eric Lo, Nathan Hui, Maurizio Seracini, Dominique Rissolo, Neal Driscoll, Falko Kuester

    Infrared thermography provides key information for a wide range of diagnostic applications within built and natural environments. As thermal states are changing with ambient conditions, it is important to deploy thermal imaging systems and operators opportunistically. It is therefore an attractive proposition to make these systems more affordable and accessible. Low-cost thermal sensors generally produce low-resolution outputs. To increase data density across large subjects, diagnosticians may create image mosaics from multiple overlapping thermographs. The registration of individual inputs into large mosaics is aided by the acquisition of additional sensor data (photographs and depthmaps), which can provide critical spatial references. In many cases, the materials inherent to the modern built environment present challenges to traditional data registration workflows between multiple sensor streams. Mobile devices offer an opportunity to innovate in the creation of these mosaics, integrating rapid geospatial mapping functionality with radiometric thermography within a 3D context. In this paper the authors evaluate the FLIR One Pro thermal camera module along with iOS/iPhone specific rapid mapping capabilities, and present a methodology: (1) introducing a workflow for the integration of short-range (within 0.3–5 m capture distance) iPhone mobile sensor data into modeling pipelines; (2) introducing a calibration model enabling effective registration and fusion of multi-modal inputs from the iPhone mobile sensor stack and FLIR One thermographic module; and (3) detailing an alternative open-source methodology for the evaluation and translation of thermographic imagery for multi-sensor fusion. The end product of this pipeline is a 3D radiometric thermographic mosaic: a spatially continuous, textured surface model in which hundreds of individual low-resolution thermographs are fused into a single queryable output retaining full 16-bit temperature values at every point. All datasets have been made openly available and the two case studies used in this paper have been made accessible at full resolution for interactive 3D online viewing.

  • Open Access

    Digital reconstruction of a serpent column at Chichen Itza’s El Castillo

    by Scott McAvoy, Claudia García-Solís, Jeremy D. Coltman, José Francisco Javier Osorio León, Francisco Pérez Ruiz, Dominique Rissolo, Travis William Stanton, Jesús Manuel Gallegos Flores, Luis Alberto Rodríguez Catana, Falko Kuester

    Atop El Castillo, the largest pyramid within the Maya site of Chichen Itza, in Mexico’s Yucatan Peninsula, stand two ruined columns that once portrayed the feathered serpent deity K’uk’ulkan. 3D-imaging technologies have identified scattered sculptural fragments belonging to these columns, allowing a digital reconstruction that opens new possibilities for their conservation.


  • Open Access

    A Reexamination of the Substructure Inside the Castillo at Chichen Itza, Yucatan, Mexico

    by Dominique Rissolo, Scott P. McAvoy, Travis W. Stanton, Claudia Garcia-Solis, Jesus Manuel Gallegos Flores, José Francisco Javier Osorio León, Francisco Pérez Ruiz, Samuel S. Meacham, Falko Kuester

    The Castillo (also known at the Temple of Kukulkan) is one the most iconic structures in Mesoamerica. This temple-pyramid towers over the main plaza of the civic-ceremonial city of Chichen Itza, which once dominated the political and economic landscape of the northern Maya lowlands. Reported here are the preliminary results of a multimodal and multiresolution scanning campaign and fusion of 3D data outputs intended to more accurately record the physical attributes of the earlier temple-pyramid inside the Castillo, known as the Castillo-sub, and examine the spatial and architectonic relationships between the two structures. A focus of our scanning campaign involved the upper façades of the sub-temple and the Chacmool and jaguar throne sculptures inside the sub-temple itself. Structured-light scans of the upper façades now serve as the definitive representation of this portion of the Castillo-sub.

  • Open Access

    Nation Scale NeRF Reconstruction

    by Alexander Mai, Scott McAvoy, Jonathan Klingspon, Davide Forcellini, Falko Kuester

    Neural Radiance Field (NeRF) rendering methodologies provide 3D reconstructions which better represent features and characteristics common to built heritage, which are otherwise poorly represented by traditional structure from motion reconstruction and rendering techniques. It is currently limited in its ability to scale to large projects. This paper, through a case study involving large scale seismic vulnerability surveys in San Marino, investigates and proposes systems which can extend NERF rendering to large multiscalar datasets linked by geographic coordinates.

  • Open Access

    Protagonists of their own Discovery: Engaging the European Public with Florentine Heritage

    by Daniel Mangano, Scott McAvoy, George Bent, Maurizio Seracini, David Pfaff, Aviral Agarwal, Falko Kuester

    Common diagnostic imaging technologies (like thermography, radiography, ground penetrating radar, high resolution 3d mapping) have a largely untapped potential to inform the public understanding and interpretation of historic sites. In historic places of constant use, the resulting compounded architectural tectonics resulting from continuous change over time can be difficult to interpret, even for experts. This paper incorporates several highly visible use cases within Florence, Italy to demonstrate the potential for data gathered from diagnostic imaging to be overlaid within a publicly available augmented reality experience to create useful tools for heritage communication and engagement within the hidden layers of a built environment. We provide methodologies for the translation of several key data types into interactive media and elaborate upon the state of the art concerning interactive location-based augmented reality toolkits and platforms within the context of cultural heritage communication.

  • Open Access

    Towards a Mexican National Archaeological Atlas Scalable 3D Web GIS and Archival Systems for Big Data

    by Scott McAvoy, Manuel Eduardo Pérez Rivas, Jesus Manuel Gallegos Flores, Wetherbee Dorshow, Travis Stanton, Cecilio Cortés Arreola, Dominique Rissolo, Samuel Meacham, Julien Fortin, Jose Francisco Javier Osorio León, et al.

    The Tren Maya project, a new railway connecting major population centres and tourist sites around Mexico’s Yucatan peninsula, impacted vast tracts of undeveloped land, ripe with archaeologically significant sites and landscapes. This effort necessitated the mobilization of Mexico’s archaeological authorities for the evaluation of large areas with tight timelines, as well as the creation of new museums along this railway network, consolidating and cataloguing previously scattered artifact collections. Authorities invested heavily in 3D survey products to meet the rigorous requirements of the project, resulting in the creation of many 3D aerial and terrestrial LiDAR, photogrammetry, structured light datasets. These survey data offer critical insight into their subjects and have wide potential for re-use by external parties, and are of great interest to the public at large, but, their inherent complexity and density create significant barriers for accessibility. We present a scalable and future-facing web-based system and archival framework enabling the long-term accessibility, visualization, and interoperability of critical 3D data assets with existing research and site management pipelines, game/xr/metaverse environments, and machine learning training applications.


  • Open Access

    A Multi-Modal Evaluation of GPS Assisted Rapid Multi-Cam Photogrammetry

    by Jonathan Klingspon, Scott McAvoy, Filiberto Chiabrando, Beatrice Tanduo, Alessio Martino, Dominique Rissolo, Falko Kuester

    Mobile multicam photogrammetry systems offer a number of advantages over other 3d imaging modalities, including rapid acquisition speed, low cost sensors, and the availability of mature open-source software systems for photogrammetric alignment and reconstruction.. Through a number of case studies we compare the Looq, a home-grown GPS enabled multi-cam mobile mapping system, to colocated models from terrestrial photogrammetry, aerial photogrammetry, two terrestrial LiDAR systems, and two SLAM LiDAR systems. We evaluate these systems across varied urban and natural environments, in GPS enabled and denied environments, tight interior spaces, and open landscapes in Europe and North America. The comparative performance of these systems is described qualitatively and quantitatively.