Tufan Ozasir
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tufan Ozasir has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Birgul Ozasir
Başkent University
7 shared publications - Kamran Gulsahi
Department of Endodontics, Faculty of Dentistry, Başkent University, Ankara 06490, Turkey
7 shared publications - Baris Kandemir
Department of Endodontics, Faculty of Dentistry, Başkent University, Ankara, Turkey
3 shared publications Birgul Ozasir
3 shared publicationsKamran Gulsahi
3 shared publications- Deniz Imamoglu
Başkent University
2 shared publications
Latest Publications
- Open Access
- 18 November 2026
- Published by Springer Nature in BMC Medical Education
Resin versus extracted human teeth in preclinical endodontic training: a randomized crossover study of access cavity preparation performance
- 18 November 2026
- Published by Springer Nature in BMC Medical Education
Open AccessResin versus extracted human teeth in preclinical endodontic training: a randomized crossover study of access cavity preparation performance
- Open Access
- 12 September 2026
- Published by MDPI AG in Bioengineering
- Vol. 13 (9) , 1061
Effects of Different Irrigation Protocols on the Surface Morphology and Elemental Composition of Super One File Nickel–Titanium Instruments
Background: Nickel–titanium (Ni-Ti) instruments are continuously exposed to irrigating solutions during root canal preparation, which may affect their surface integrity. Evidence regarding the combined morphological and elemental effects of contemporary irrigation protocols on heat-treated single-file systems remains limited. This study evaluated the effects of different irrigation protocols on the surface morphology and elemental composition of Super One File Ni-Ti instruments using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Methods: Thirty Super One File instruments (size 25/.04) were randomly allocated to three groups: distilled water (DW), a sequential NaOCl–EDTA–NaOCl irrigation protocol (NEN), and a NaOCl/HEDP continuous chelation protocol. Instruments were continuously rotated in the assigned solution for 20 min. Surface morphology was assessed by SEM and elemental composition by EDS. SEM data were analysed using the Fisher–Freeman–Halton exact test, whereas EDS data were analysed using linear mixed-effects models with post hoc pairwise comparisons (α = 0.05). Results: SEM analysis revealed protocol- and region-dependent differences in surface alterations. The NEN group showed significantly higher corrosion and pitting frequencies than the DW group in selected regions, whereas no significant differences in these outcomes were detected between the NEN and HEDP groups. EDS analysis showed significant protocol × region interactions for all elements except Cl. These differences were most pronounced in the coronal region, where the HEDP group exhibited lower Ni and Ti and higher O, P, Na, and Ca levels than the DW and NEN groups. Conclusions: The tested irrigation protocols produced distinct, region-dependent surface responses in Super One File instruments, highlighting the potential influence of irrigation chemistry on Ni-Ti instrument surfaces under controlled experimental conditions. The clinical and mechanical implications of these alterations remain to be established.
- 12 September 2026
- Published by MDPI AG in Bioengineering
- Vol. 13 (9) , 1061
Open AccessEffects of Different Irrigation Protocols on the Surface Morphology and Elemental Composition of Super One File Nickel–Titanium Instruments
Background: Nickel–titanium (Ni-Ti) instruments are continuously exposed to irrigating solutions during root canal preparation, which may affect their surface integrity. Evidence regarding the combined morphological and elemental effects of contemporary irrigation protocols on heat-treated single-file systems remains limited. This study evaluated the effects of different irrigation protocols on the surface morphology and elemental composition of Super One File Ni-Ti instruments using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Methods: Thirty Super One File instruments (size 25/.04) were randomly allocated to three groups: distilled water (DW), a sequential NaOCl–EDTA–NaOCl irrigation protocol (NEN), and a NaOCl/HEDP continuous chelation protocol. Instruments were continuously rotated in the assigned solution for 20 min. Surface morphology was assessed by SEM and elemental composition by EDS. SEM data were analysed using the Fisher–Freeman–Halton exact test, whereas EDS data were analysed using linear mixed-effects models with post hoc pairwise comparisons (α = 0.05). Results: SEM analysis revealed protocol- and region-dependent differences in surface alterations. The NEN group showed significantly higher corrosion and pitting frequencies than the DW group in selected regions, whereas no significant differences in these outcomes were detected between the NEN and HEDP groups. EDS analysis showed significant protocol × region interactions for all elements except Cl. These differences were most pronounced in the coronal region, where the HEDP group exhibited lower Ni and Ti and higher O, P, Na, and Ca levels than the DW and NEN groups. Conclusions: The tested irrigation protocols produced distinct, region-dependent surface responses in Super One File instruments, highlighting the potential influence of irrigation chemistry on Ni-Ti instrument surfaces under controlled experimental conditions. The clinical and mechanical implications of these alterations remain to be established.
- Open Access
- 10 July 2026
- Published by SAGE Publications in Journal of Applied Biomaterials & Functional Materials
- Vol. 24
Partial restoration of fracture resistance in mandibular molars: A comparative study of Bio MTA+ and calcium-enriched mixture for furcal perforation repair
Objective: Furcal perforations are iatrogenic complications which compromise the biological and mechanical integrity of endodontically treated teeth. Although calcium silicate-based materials are widely used for perforation repair, their ability to restore fracture resistance remains unclear. This study aimed to evaluate the fracture strength of mandibular molars with simulated furcal perforations repaired using Bio MTA+ or calcium-enriched mixture (CEM). Method: Seventy-six extracted human mandibular molars were randomly allocated into four groups (n = 19): negative control (no perforation), positive control (perforation without repair), Bio MTA+ (perforation repaired with Bio MTA+) and CEM (perforation repaired with CEM). Standardised root canal treatments were performed on all specimens, followed by perforation and repair procedures where applicable. Fracture strength was measured using a universal testing machine at a crosshead speed of 1 mm/min. The data were analysed using one-way ANOVA and Tukey’s HSD test. Results: A statistically significant difference was observed among the groups (F(3,72) = 52.362, p < 0.001). The negative control group exhibited the highest fracture strength values, whereas the positive control group presented the lowest. Both Bio MTA+ and CEM groups demonstrated significantly higher fracture strength than the positive control group (p < 0.05), but significantly lower values than the negative control group (p < 0.05). No statistically significant difference was found between Bio MTA+ and CEM (p = 0.773). Conclusion: Furcal perforations significantly reduce the fracture resistance of endodontically treated teeth. Repair with calcium silicate–based materials improves mechanical strength but does not restore it to the level of endodontically treated teeth without perforation. Bio MTA+ and CEM demonstrated comparable performance and may be considered suitable options for furcal perforation repair.
- 10 July 2026
- Published by SAGE Publications in Journal of Applied Biomaterials & Functional Materials
- Vol. 24
Open AccessPartial restoration of fracture resistance in mandibular molars: A comparative study of Bio MTA+ and calcium-enriched mixture for furcal perforation repair
Objective: Furcal perforations are iatrogenic complications which compromise the biological and mechanical integrity of endodontically treated teeth. Although calcium silicate-based materials are widely used for perforation repair, their ability to restore fracture resistance remains unclear. This study aimed to evaluate the fracture strength of mandibular molars with simulated furcal perforations repaired using Bio MTA+ or calcium-enriched mixture (CEM). Method: Seventy-six extracted human mandibular molars were randomly allocated into four groups (n = 19): negative control (no perforation), positive control (perforation without repair), Bio MTA+ (perforation repaired with Bio MTA+) and CEM (perforation repaired with CEM). Standardised root canal treatments were performed on all specimens, followed by perforation and repair procedures where applicable. Fracture strength was measured using a universal testing machine at a crosshead speed of 1 mm/min. The data were analysed using one-way ANOVA and Tukey’s HSD test. Results: A statistically significant difference was observed among the groups (F(3,72) = 52.362, p < 0.001). The negative control group exhibited the highest fracture strength values, whereas the positive control group presented the lowest. Both Bio MTA+ and CEM groups demonstrated significantly higher fracture strength than the positive control group (p < 0.05), but significantly lower values than the negative control group (p < 0.05). No statistically significant difference was found between Bio MTA+ and CEM (p = 0.773). Conclusion: Furcal perforations significantly reduce the fracture resistance of endodontically treated teeth. Repair with calcium silicate–based materials improves mechanical strength but does not restore it to the level of endodontically treated teeth without perforation. Bio MTA+ and CEM demonstrated comparable performance and may be considered suitable options for furcal perforation repair.
- Open Access
- 3 March 2026
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1)
Effect of Dual Rinse HEDP on the push-out bond strength of AH Plus and AH Plus Bioceramic sealers: an in vitro study
The adhesion of root canal sealers to dentin is critical for preventing microleakage and ensuring long-term endodontic success. Irrigating agents influence dentin surface characteristics and thus affect sealer bond strength. This study aimed to compare the effects of continuous chelating (NaOCl + HEDP) and sequential chelating (NaOCl followed by EDTA) protocols on the bond strength of AH Plus and AH Plus Bioceramic root-canal sealers. Fifty-two extracted human mandibular premolars were decoronated and divided into two groups. Chemo-mechanical preparation was completed using 2.5% NaOCl (Group 1) and a mixture of 2.5% NaOCl + 9% HEDP (Dual Rinse, Group 2) up to ProTaper Next X3. Final irrigation was performed with 17% EDTA in Group 1 and 9% Dual Rinse HEDP in Group 2. Each group was further divided into two subgroups according to the sealer used: AH Plus or AH Plus Bioceramic. Root sections (1.5 mm thick) were taken from apical, middle, and coronal thirds. Bond strength was evaluated using a universal testing machine at 1 mm/min in the apico-coronal direction. Failure modes were also evaluated. Data were analysed using a three-way mixed-effects ANOVA with irrigation protocol and sealer type as between-subject factors and anatomical region as a within-subject factor, followed by post hoc comparisons based on estimated marginal means. Continuous chelation significantly increased the bond strength of AH Plus but had no effect on AH Plus Bioceramic. Cohesive failure was dominant in AH Plus, while no dominant mode was observed in AH Plus Bioceramic. Bond strength increased toward the apical region in all groups. Irrigation protocols influence the bond strength of root canal sealers. Continuous chelation may enhance adhesion, particularly for epoxy resin–based sealers, while it does not appear to significantly affect the bond strength of AH Plus Bioceramic.
- 3 March 2026
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1)
Open AccessEffect of Dual Rinse HEDP on the push-out bond strength of AH Plus and AH Plus Bioceramic sealers: an in vitro study
The adhesion of root canal sealers to dentin is critical for preventing microleakage and ensuring long-term endodontic success. Irrigating agents influence dentin surface characteristics and thus affect sealer bond strength. This study aimed to compare the effects of continuous chelating (NaOCl + HEDP) and sequential chelating (NaOCl followed by EDTA) protocols on the bond strength of AH Plus and AH Plus Bioceramic root-canal sealers. Fifty-two extracted human mandibular premolars were decoronated and divided into two groups. Chemo-mechanical preparation was completed using 2.5% NaOCl (Group 1) and a mixture of 2.5% NaOCl + 9% HEDP (Dual Rinse, Group 2) up to ProTaper Next X3. Final irrigation was performed with 17% EDTA in Group 1 and 9% Dual Rinse HEDP in Group 2. Each group was further divided into two subgroups according to the sealer used: AH Plus or AH Plus Bioceramic. Root sections (1.5 mm thick) were taken from apical, middle, and coronal thirds. Bond strength was evaluated using a universal testing machine at 1 mm/min in the apico-coronal direction. Failure modes were also evaluated. Data were analysed using a three-way mixed-effects ANOVA with irrigation protocol and sealer type as between-subject factors and anatomical region as a within-subject factor, followed by post hoc comparisons based on estimated marginal means. Continuous chelation significantly increased the bond strength of AH Plus but had no effect on AH Plus Bioceramic. Cohesive failure was dominant in AH Plus, while no dominant mode was observed in AH Plus Bioceramic. Bond strength increased toward the apical region in all groups. Irrigation protocols influence the bond strength of root canal sealers. Continuous chelation may enhance adhesion, particularly for epoxy resin–based sealers, while it does not appear to significantly affect the bond strength of AH Plus Bioceramic.
- Open Access
- 5 December 2025
- Published by Springer Nature in BMC Oral Health
- Vol. 25 (1) , 1879
Effect of gutta-percha cone-mediated ultrasonic activation on the push-out bond strength and dentinal tubule penetration of epoxy resin- and silicate-based root canal sealers: an in vitro study
Ultrasonic activation may alter the bond strength and intratubular penetration ability of root canal sealers, which are important criteria for the long-ter
- 5 December 2025
- Published by Springer Nature in BMC Oral Health
- Vol. 25 (1) , 1879
Open AccessEffect of gutta-percha cone-mediated ultrasonic activation on the push-out bond strength and dentinal tubule penetration of epoxy resin- and silicate-based root canal sealers: an in vitro study
Ultrasonic activation may alter the bond strength and intratubular penetration ability of root canal sealers, which are important criteria for the long-ter
- 31 August 2025
- Published by Ankara University in European Annals of Dental Sciences
- Vol. 52 (2) , 103-110
Evaluation of Endodontic Retreatment Videos on The Youtube Platform: Quality and Content Analysis
Purpose: To evaluate the educational quality of Turkish endodontic retreatment videos on the YouTube platform. Materials and Methods: 12 key words were used to scope videos related to endodontic retreatment on YouTube platform. A total number of 34 videos out of 240 were included in the study. Three researchers scored the videos according to GQS and Modified DISCERN criteria. Spearman correlation analysis was used to examine the relationship between video characteristics and quality scores. Results: Longer videos were found to have higher values in terms of both GQS and DISCERN scores. According to the DISCERN scale, the vast majority of videos do not include reliable sources of information. There was a positive correlation between quality scores and video duration, number of likes, and subscription counts. A moderate positive relationship was found between the total DISCERN score and video duration. No statistically significant relationship was found between other video characteristics and DISCERN scores. Conclusion: It was concluded that the quality level of videos published on YouTube varies, and due to inadequate sources of information, attention should be paid to provide accurate information in the field of endodontic retreatment. Future research could make a more comprehensive assessment by comparing the quality of health videos on different topics.
- 31 August 2025
- Published by Ankara University in European Annals of Dental Sciences
- Vol. 52 (2) , 103-110
Evaluation of Endodontic Retreatment Videos on The Youtube Platform: Quality and Content Analysis
Purpose: To evaluate the educational quality of Turkish endodontic retreatment videos on the YouTube platform. Materials and Methods: 12 key words were used to scope videos related to endodontic retreatment on YouTube platform. A total number of 34 videos out of 240 were included in the study. Three researchers scored the videos according to GQS and Modified DISCERN criteria. Spearman correlation analysis was used to examine the relationship between video characteristics and quality scores. Results: Longer videos were found to have higher values in terms of both GQS and DISCERN scores. According to the DISCERN scale, the vast majority of videos do not include reliable sources of information. There was a positive correlation between quality scores and video duration, number of likes, and subscription counts. A moderate positive relationship was found between the total DISCERN score and video duration. No statistically significant relationship was found between other video characteristics and DISCERN scores. Conclusion: It was concluded that the quality level of videos published on YouTube varies, and due to inadequate sources of information, attention should be paid to provide accurate information in the field of endodontic retreatment. Future research could make a more comprehensive assessment by comparing the quality of health videos on different topics.
- Open Access
- 27 December 2024
- Published by Elsevier in Journal of Dental Sciences
- Vol. 20 (3) , 1532-1538
In vitro comparison of fracture strength of maxillary incisors with the simulated external root resorption cavities repaired with BioMTA or Biodentine
- 27 December 2024
- Published by Elsevier in Journal of Dental Sciences
- Vol. 20 (3) , 1532-1538
Open AccessIn vitro comparison of fracture strength of maxillary incisors with the simulated external root resorption cavities repaired with BioMTA or Biodentine
- Open Access
The Effect of Different Final Irrigation Regimens on the Dentinal Tubule Penetration of Three Different Root Canal Sealers: A Confocal Laser Scanning Microscopy Study In Vitro
This study evaluated the effects of different final irrigation regimens on the dentin tubule penetration of three different root canal sealers using confocal laser scanning microscopy (CLSM). A total of 160 single-rooted extracted mandibular premolar teeth were divided into five groups ( each) according to the solution used in the final rinse protocol, as follows: 17% ethylenediaminetetraacetic acid (EDTA) (group 1), 17% EDTA and 2% chlorhexidine gluconate (CHX) (group 2), 7% maleic acid (MA) (group 3), 7% MA and 2% CHX (group 4), and 5.25% NaOCl (group 5). Two roots from each group were examined under scanning electron microscopy (SEM) to visualize smear layer removal. Experimental groups were then split randomly into three subgroups ( ) and obturated using a cold lateral condensation technique with 0.1% rhodamine B-labelled sealers [either AH Plus (group A), EndoREZ (group E), or Tech BioSealer Endo (group T)] and gutta-percha. Specimens were sectioned and observed by CLSM to evaluate the percentage and maximum depth of sealer penetration at the apical, middle, and coronal levels. Statistical comparison was performed on grouped (apical, middle, and coronal segments) and ungrouped data using two-way ANOVA with Bonferroni post hoc test ( ). AH Plus showed the greatest tubule penetration while Tech BioSealer Endo showed the least. Resin-based sealers displayed deeper and more consistent penetration. CHX irrigation positively influenced sealer tubule penetration.
Open AccessThe Effect of Different Final Irrigation Regimens on the Dentinal Tubule Penetration of Three Different Root Canal Sealers: A Confocal Laser Scanning Microscopy Study In Vitro
This study evaluated the effects of different final irrigation regimens on the dentin tubule penetration of three different root canal sealers using confocal laser scanning microscopy (CLSM). A total of 160 single-rooted extracted mandibular premolar teeth were divided into five groups ( each) according to the solution used in the final rinse protocol, as follows: 17% ethylenediaminetetraacetic acid (EDTA) (group 1), 17% EDTA and 2% chlorhexidine gluconate (CHX) (group 2), 7% maleic acid (MA) (group 3), 7% MA and 2% CHX (group 4), and 5.25% NaOCl (group 5). Two roots from each group were examined under scanning electron microscopy (SEM) to visualize smear layer removal. Experimental groups were then split randomly into three subgroups ( ) and obturated using a cold lateral condensation technique with 0.1% rhodamine B-labelled sealers [either AH Plus (group A), EndoREZ (group E), or Tech BioSealer Endo (group T)] and gutta-percha. Specimens were sectioned and observed by CLSM to evaluate the percentage and maximum depth of sealer penetration at the apical, middle, and coronal levels. Statistical comparison was performed on grouped (apical, middle, and coronal segments) and ungrouped data using two-way ANOVA with Bonferroni post hoc test ( ). AH Plus showed the greatest tubule penetration while Tech BioSealer Endo showed the least. Resin-based sealers displayed deeper and more consistent penetration. CHX irrigation positively influenced sealer tubule penetration.
- Open Access
- 1 January 2021
- Published by Wiley in BioMed Research International
- Vol. 2021 (1)
Comparison of Fracture Resistance of Endodontically Treated Teeth Restored with FiberSite Postsystem and Glass Fiber, Combined with Different Root Canal Sealers
This study is aimed at evaluating the effects of FiberSite and glass fiber postsystems on the fracture resistance of endodontically restored teeth, when combined with various root canal sealers. Forty human mandibular premolar teeth, each having a single root with anatomically comparable dimension and length, were selected. The teeth in each experimental group (n = 10) were instrumented, obturated, and restored with the following procedures: in group 1, AH Plus root canal sealer and a glass fiber post with a composite core; in group 2, AH Plus root canal sealer and a FiberSite postsystem; in group 3, Sure‐Seal Root canal sealer and a glass fiber post with a composite core; and in group 4, Sure‐Seal Root canal sealer and a FiberSite postsystem. The specimens were placed on a universal test machine. The fracture resistance of all specimens was tested using generic test equipment, and the value of the force in newton (N) during fracture was measured for each root. A statistical analysis was conducted through the Kruskal–Wallis test as well as the post hoc test. The tests showed a significant difference between groups 2 and 3, with group 3 producing load values that were significantly higher than group 2. In contrast, no significant differences were found to exist between the other groups. Regardless of postsystems, groups 3 and 4 showed higher mean fracture values (but no statistically significant differences) than groups 1 and 2.
- 1 January 2021
- Published by Wiley in BioMed Research International
- Vol. 2021 (1)
Open AccessComparison of Fracture Resistance of Endodontically Treated Teeth Restored with FiberSite Postsystem and Glass Fiber, Combined with Different Root Canal Sealers
This study is aimed at evaluating the effects of FiberSite and glass fiber postsystems on the fracture resistance of endodontically restored teeth, when combined with various root canal sealers. Forty human mandibular premolar teeth, each having a single root with anatomically comparable dimension and length, were selected. The teeth in each experimental group (n = 10) were instrumented, obturated, and restored with the following procedures: in group 1, AH Plus root canal sealer and a glass fiber post with a composite core; in group 2, AH Plus root canal sealer and a FiberSite postsystem; in group 3, Sure‐Seal Root canal sealer and a glass fiber post with a composite core; and in group 4, Sure‐Seal Root canal sealer and a FiberSite postsystem. The specimens were placed on a universal test machine. The fracture resistance of all specimens was tested using generic test equipment, and the value of the force in newton (N) during fracture was measured for each root. A statistical analysis was conducted through the Kruskal–Wallis test as well as the post hoc test. The tests showed a significant difference between groups 2 and 3, with group 3 producing load values that were significantly higher than group 2. In contrast, no significant differences were found to exist between the other groups. Regardless of postsystems, groups 3 and 4 showed higher mean fracture values (but no statistically significant differences) than groups 1 and 2.