Hua Cheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hua Cheng has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Feng Zha
Anhui Province Engineering Laboratory for Mine Ecological Remediation, Anhui University, Hefei 230601, China
2 shared publications - Hui Liu
Anhui Province Engineering Laboratory for Mine Ecological Remediation, Anhui University, Hefei, China
2 shared publications - Xiaojun Zhu
School of Resources and Environmental Engineering, Anhui University, Hefei 230601, China
2 shared publications - Xiaoyu Yang
Department of Engineering Management, Hefei College of Finance and Economics, Hefei 231299, China
2 shared publications - Chang Li
Anhui Province Engineering Research Center for Mine Ecological Remediation, Anhui University, Hefei 230601, China
1 shared publication - Guangli Guo
School of Environment and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116, China
1 shared publication
Latest Publications
- Open Access
- 10 May 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (10) , 4334
Identification of Heavy Metal Sources and Health Risk Assessment in Coal Mining Area Soils Using Mercury Isotopes and Positive Matrix Factorization (PMF) Model
This investigation focuses on anthropogenic impacts on metallic element distribution within coal mining ecosystems, particularly addressing soil contamination risks in the Linhuan region. Researchers conducted comprehensive sampling and analysis of surface soil contaminants, specifically quantifying mercury, copper, zinc, iron, aluminum, and lead concentrations. Through integrated application of receptor modeling (PMF) and mercury isotopic fingerprinting methodology, this study established a quantitative assessment framework for pollution source apportionment. The multi-technique approach enables precise identification of contamination pathways and proportional contributions from different anthropogenic activities in the mining environment. Coupled with a human health risk assessment model, the health risks associated with specific sources were evaluated. The results indicate that the concentrations of Hg, Cu, Zn, Fe, Al, and Pb in the soil of the study area are 9.49, 2.80, 4.01, 11.79, 6.32, and 1.03 times the soil background values, respectively, suggesting a certain degree of enrichment of these six heavy metals in the soil. The PMF source contribution results show that the soil heavy metals in the study area have three sources: natural soil formation, a mixture of coal combustion and traffic activities, and coal mining activities, with contribution rates of 31.23%, 31.59%, and 37.18%, respectively. The health risk assessment results for specific sources indicate that the non-carcinogenic risks of soil heavy metals in the local area require sufficient attention. Hg is the main cause of non-carcinogenic health risks for both groups, making it a priority element for controlling soil heavy metal health risks. Coal mining activities are the main source (52.4%) of non-carcinogenic risks, making them a priority control source for soil heavy metal health risks in the study area. These findings provide a theoretical basis for enhancing the refined management of heavy metal pollution and the prevention of health risks in soils of coal mining areas.
- 10 May 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (10) , 4334
Open AccessIdentification of Heavy Metal Sources and Health Risk Assessment in Coal Mining Area Soils Using Mercury Isotopes and Positive Matrix Factorization (PMF) Model
This investigation focuses on anthropogenic impacts on metallic element distribution within coal mining ecosystems, particularly addressing soil contamination risks in the Linhuan region. Researchers conducted comprehensive sampling and analysis of surface soil contaminants, specifically quantifying mercury, copper, zinc, iron, aluminum, and lead concentrations. Through integrated application of receptor modeling (PMF) and mercury isotopic fingerprinting methodology, this study established a quantitative assessment framework for pollution source apportionment. The multi-technique approach enables precise identification of contamination pathways and proportional contributions from different anthropogenic activities in the mining environment. Coupled with a human health risk assessment model, the health risks associated with specific sources were evaluated. The results indicate that the concentrations of Hg, Cu, Zn, Fe, Al, and Pb in the soil of the study area are 9.49, 2.80, 4.01, 11.79, 6.32, and 1.03 times the soil background values, respectively, suggesting a certain degree of enrichment of these six heavy metals in the soil. The PMF source contribution results show that the soil heavy metals in the study area have three sources: natural soil formation, a mixture of coal combustion and traffic activities, and coal mining activities, with contribution rates of 31.23%, 31.59%, and 37.18%, respectively. The health risk assessment results for specific sources indicate that the non-carcinogenic risks of soil heavy metals in the local area require sufficient attention. Hg is the main cause of non-carcinogenic health risks for both groups, making it a priority element for controlling soil heavy metal health risks. Coal mining activities are the main source (52.4%) of non-carcinogenic risks, making them a priority control source for soil heavy metal health risks in the study area. These findings provide a theoretical basis for enhancing the refined management of heavy metal pollution and the prevention of health risks in soils of coal mining areas.
- Open Access
Mechanical Response Characteristics and Tangent Modulus Calculation Model of Expansive-Clay Unloading Stress Path
As a special type of clay, expansive clay is widely distributed in China. Its characteristics of swelling and softening when meeting water and shrinking and cracking when losing water bring many hidden dangers to engineering construction. Expansive clay is known as “engineering cancer”, and in-depth research on the unloading mechanical response characteristics and the unloading constitutive relationships of expansive clay is a prerequisite for conducting geotechnical engineering design and safety analysis in expansive-soil areas. In order to obtain the unloading mechanical response characteristics and the expression of the unloading tangent modulus of expansive clay, typical expansive clay in the Hefei area was taken as the research object, and triaxial unloading stress path tests were conducted. The stress–strain properties, microstructures, macro failure modes, and strength indexes of the expansive clay were analyzed under unloading stress paths. Through an applicability analysis of several classical soil strength criteria, an unloading constitutive model and the unloading tangent modulus expression of the expansive clay were constructed based on the Mohr–Coulomb (hereinafter referred to as “M-C”) criterion, the Drucker–Prager (hereinafter referred to as “D-P”) criterion, and the extended Spatial Mobilized Plane (hereinafter referred to as “SMP”) criterion theoretical frameworks. The following research results were obtained: (1) The stress–strain curves of the three stress paths of the expansive clay were hyperbolic. The expansive clay showed typical strain-hardening characteristics and belonged to work-hardening soil. (2) Under the unloading stress paths, the soil particles were involved in the unloading process of stress release, and the failure samples showed obvious stretching, curling, and slipping phenomena in their soil sheet elements. (3) Under both unloading stress paths, the strength of the expansive clay was significantly weakened and reduced. Under the lateral unloading paths, the cohesive force (c) of the expansive clay was reduced by 32.7% and the internal friction angle (φ) was increased by 19% compared with those under conventional loading, while under the axial unloading path, c was reduced by 63.5% and φ was reduced by 28.7%. (4) For typical expansive clay in Hefei, the conventional triaxial compression (hereinafter referred to as “CTC”) test, the reduced triaxial compression (hereinafter referred to as “RTC”) test, and the reduced triaxial extension (hereinafter referred to as “RTE”) test stress paths were suitable for characterization and deformation prediction using the M-C strength criterion, D-P strength criterion, and extended SMP strength criterion, respectively. (5) The derived unloading constitutive model and the unified tangent modulus formula of the expansive clay could accurately predict the deformation characteristics of the unloading stress path of the expansive clay. These research results will provide an important reference for future engineering construction in expansive-clay areas.
Open AccessMechanical Response Characteristics and Tangent Modulus Calculation Model of Expansive-Clay Unloading Stress Path
As a special type of clay, expansive clay is widely distributed in China. Its characteristics of swelling and softening when meeting water and shrinking and cracking when losing water bring many hidden dangers to engineering construction. Expansive clay is known as “engineering cancer”, and in-depth research on the unloading mechanical response characteristics and the unloading constitutive relationships of expansive clay is a prerequisite for conducting geotechnical engineering design and safety analysis in expansive-soil areas. In order to obtain the unloading mechanical response characteristics and the expression of the unloading tangent modulus of expansive clay, typical expansive clay in the Hefei area was taken as the research object, and triaxial unloading stress path tests were conducted. The stress–strain properties, microstructures, macro failure modes, and strength indexes of the expansive clay were analyzed under unloading stress paths. Through an applicability analysis of several classical soil strength criteria, an unloading constitutive model and the unloading tangent modulus expression of the expansive clay were constructed based on the Mohr–Coulomb (hereinafter referred to as “M-C”) criterion, the Drucker–Prager (hereinafter referred to as “D-P”) criterion, and the extended Spatial Mobilized Plane (hereinafter referred to as “SMP”) criterion theoretical frameworks. The following research results were obtained: (1) The stress–strain curves of the three stress paths of the expansive clay were hyperbolic. The expansive clay showed typical strain-hardening characteristics and belonged to work-hardening soil. (2) Under the unloading stress paths, the soil particles were involved in the unloading process of stress release, and the failure samples showed obvious stretching, curling, and slipping phenomena in their soil sheet elements. (3) Under both unloading stress paths, the strength of the expansive clay was significantly weakened and reduced. Under the lateral unloading paths, the cohesive force (c) of the expansive clay was reduced by 32.7% and the internal friction angle (φ) was increased by 19% compared with those under conventional loading, while under the axial unloading path, c was reduced by 63.5% and φ was reduced by 28.7%. (4) For typical expansive clay in Hefei, the conventional triaxial compression (hereinafter referred to as “CTC”) test, the reduced triaxial compression (hereinafter referred to as “RTC”) test, and the reduced triaxial extension (hereinafter referred to as “RTE”) test stress paths were suitable for characterization and deformation prediction using the M-C strength criterion, D-P strength criterion, and extended SMP strength criterion, respectively. (5) The derived unloading constitutive model and the unified tangent modulus formula of the expansive clay could accurately predict the deformation characteristics of the unloading stress path of the expansive clay. These research results will provide an important reference for future engineering construction in expansive-clay areas.
- Open Access
- 11 September 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (18) , 11397
Spatial Pattern Reconstruction of Water and Land Resources in Coal Mining Subsidence Areas within Urban Regions
Water and land resources are important material bases of economic and social development, and their spatial patterns determine the pattern of the urban development. The development and expansion of coal-resource-based cities have introduced new societal problems, such as the overlapping of new city construction areas and underground coal resources. Underground coal mining also leads to surface subsidence, which destroys water and land resources and seriously affects the sustainable development of coal-resource-based cities. The surface subsidence area takes a long time to stabilize, and may form a large waterlogging area due to the high groundwater level, thereby increasing the difficulty of reconstructing mining subsidence areas. In this context, a scientific and complete method for reconstructing the spatial pattern of water and land resources in unstable coal mining subsidence areas within urban is proposed in this paper. This method initially predicts the surface subsidence value and then divides the subsidence area within the urban region into the waterlogging area and the non-waterlogging area according to the surface subsidence value. The waterlogging area will be renovated into a landscape lake district in the city by a series of transformation measures. Afterwards, goaf rock mass activation and surface stability evaluation analyses are performed in the non-waterlogging area. According to the evaluation results, land resources can be divided into unaffected, restricted and prohibited building areas, with each area being transformed differently. The Lv Jin Lake in Huaibei is selected as a case study, and the proposed method is applied to reconstruct its water and land resources. The original spatial pattern of the large-scale waterlogging area and abandoned land due to mining subsidence in urban areas is then reconstructed into a spatial pattern that integrates the urban landscape, scenario living and eco-tourism. Compared with traditional subsidence area management, the proposed method greatly increases the utilization value of water and land resources, improves the urban ecological environment, enhances the urban quality and effectively alleviates the problems of land shortage and human–land conflict in coal-resource-based cities.
- 11 September 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (18) , 11397
Open AccessSpatial Pattern Reconstruction of Water and Land Resources in Coal Mining Subsidence Areas within Urban Regions
Water and land resources are important material bases of economic and social development, and their spatial patterns determine the pattern of the urban development. The development and expansion of coal-resource-based cities have introduced new societal problems, such as the overlapping of new city construction areas and underground coal resources. Underground coal mining also leads to surface subsidence, which destroys water and land resources and seriously affects the sustainable development of coal-resource-based cities. The surface subsidence area takes a long time to stabilize, and may form a large waterlogging area due to the high groundwater level, thereby increasing the difficulty of reconstructing mining subsidence areas. In this context, a scientific and complete method for reconstructing the spatial pattern of water and land resources in unstable coal mining subsidence areas within urban is proposed in this paper. This method initially predicts the surface subsidence value and then divides the subsidence area within the urban region into the waterlogging area and the non-waterlogging area according to the surface subsidence value. The waterlogging area will be renovated into a landscape lake district in the city by a series of transformation measures. Afterwards, goaf rock mass activation and surface stability evaluation analyses are performed in the non-waterlogging area. According to the evaluation results, land resources can be divided into unaffected, restricted and prohibited building areas, with each area being transformed differently. The Lv Jin Lake in Huaibei is selected as a case study, and the proposed method is applied to reconstruct its water and land resources. The original spatial pattern of the large-scale waterlogging area and abandoned land due to mining subsidence in urban areas is then reconstructed into a spatial pattern that integrates the urban landscape, scenario living and eco-tourism. Compared with traditional subsidence area management, the proposed method greatly increases the utilization value of water and land resources, improves the urban ecological environment, enhances the urban quality and effectively alleviates the problems of land shortage and human–land conflict in coal-resource-based cities.
- Open Access
- 1 January 2021
- Published by Wiley in Advances in Civil Engineering
- Vol. 2021 (1)
Subsidence Control Design Method and Application to Backfill‐Strip Mining Technology
Intensive and massive coal mining causes a series of geological hazards and environmental problems, especially surface subsidence. At present, two major types of subsidence control technology are applied: backfilling technology and partial mining technology. However, the cost of backfill mining is high and partial mining has a low recovery ratio. Therefore, the backfill‐strip mining is used to solve the problems of high cost and shortage of filling materials in coal mines at present. A subsidence control design method of backfill‐strip mining was proposed in this paper based on the subsidence control effects and economic benefits. First, the stability of the composite support pillar of the filling body and coal pillars in the backfill‐strip mining is analyzed, and the values of the main subsidence influencing factors that include the filling material, the size of the backfilling working face, caving mining face, and residual coal pillar are preliminarily determined. Then, the surface movement and deformation are predicted based on the equivalent superposition probability integral method (PIM). The subsidence influencing factors are optimized and determined by comparing the requirements of the safety fortification index of the antideformation ability of surface buildings, resource recovery rate, and coal mining cost. Finally, the mining scheme design parameters of the backfill‐strip mining technology are determined. This method is applied in the subsidence control design of backfill‐strip mining in the Ezhuang coal mine. Research results show that backfill‐strip mining can ensure the safety of surface buildings, increase the resource recovery rate, and reduce coal mining costs through the reasonable design of this method. This study can provide scientific guidance for subsidence disaster control, prevention, and engineering design in backfill‐strip mining.
- 1 January 2021
- Published by Wiley in Advances in Civil Engineering
- Vol. 2021 (1)
Open AccessSubsidence Control Design Method and Application to Backfill‐Strip Mining Technology
Intensive and massive coal mining causes a series of geological hazards and environmental problems, especially surface subsidence. At present, two major types of subsidence control technology are applied: backfilling technology and partial mining technology. However, the cost of backfill mining is high and partial mining has a low recovery ratio. Therefore, the backfill‐strip mining is used to solve the problems of high cost and shortage of filling materials in coal mines at present. A subsidence control design method of backfill‐strip mining was proposed in this paper based on the subsidence control effects and economic benefits. First, the stability of the composite support pillar of the filling body and coal pillars in the backfill‐strip mining is analyzed, and the values of the main subsidence influencing factors that include the filling material, the size of the backfilling working face, caving mining face, and residual coal pillar are preliminarily determined. Then, the surface movement and deformation are predicted based on the equivalent superposition probability integral method (PIM). The subsidence influencing factors are optimized and determined by comparing the requirements of the safety fortification index of the antideformation ability of surface buildings, resource recovery rate, and coal mining cost. Finally, the mining scheme design parameters of the backfill‐strip mining technology are determined. This method is applied in the subsidence control design of backfill‐strip mining in the Ezhuang coal mine. Research results show that backfill‐strip mining can ensure the safety of surface buildings, increase the resource recovery rate, and reduce coal mining costs through the reasonable design of this method. This study can provide scientific guidance for subsidence disaster control, prevention, and engineering design in backfill‐strip mining.