Mangali Chinna Chinnaiah
Research Subjects
Mangali Chinna Chinnaiah has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Sanjay Dubey
Department of Electronics and Communications Engineering, B. V. Raju Institute of Technology, Medak (Dist), Narsapur 502313, Telangana, India
10 shared publications - Narambhatla Janardhan
Department of Mechanical Engineering, Chaitanya Bharati Institute of Technology, Gandipet, Hyderabad 500075, Telangana, India
9 shared publications - Dodde Hari Krishna
Department of Electronics and Communications Engineering, B. V. Raju Institute of Technology, Medak (Dist), Narsapur 502313, Telangana, India
8 shared publications - Siew-Kei Lam
Nanyang Technological University
8 shared publications - Gaddam Divya Vani
Department of Electronics and Communications Engineering, B. V. Raju Institute of Technology, Medak (Dist), Narsapur 502313, Telangana, India
7 shared publications - Mudasar Basha
Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Green Fields, Guntur 522502, Andhra Pradesh, India
7 shared publications
Latest Publications
- Open Access
FPGA-Based Weighted DTW Framework with Hybrid Gait Symmetry Index for Real-Time Wearable Gait Classification
Gait symmetry analysis has emerged as an important tool in rehabilitation engineering and neurological disorder assessment, as it provides clinically relevant indicators of mobility impairment and gait abnormalities. The proposed framework integrates gait symmetry variability, statistical gait features and Dynamic Time Warping (DTW)-based temporal alignment to enhance robustness against gait variations and irregular walking patterns. A hybrid feature vector comprising DTW similarity scores, the hybrid gait symmetry index (GSI), and statistical gait descriptors was employed to classify gait patterns into five categories: normal, slow, medium, fast, and abnormal. The system was implemented as a wearable edge-computing platform using an NI myRIO device equipped with a tri-axial Inertial Measurement Unit (IMU) mounted on the subject’s body. The onboard FPGA performs real-time signal preprocessing, GSI computation, feature extraction, constrained DTW matching, and gait classification using fixed-point streaming architectures and BRAM-based buffering. Meanwhile, the embedded ARM processor manages TCP/IP communication and transmits real-time gait information to a remote monitoring workstation via a WiFi interface for visualization and analysis. Operating at a clock frequency of 100 MHz, the complete architecture achieves an end-to-end processing latency of approximately 4 ms. The proposed FPGA-based implementation provides low-latency, energy-efficient, and real-time gait analysis, making it well suited for wearable rehabilitation systems, assistive healthcare devices, and continuous mobility monitoring applications.
Open AccessFPGA-Based Weighted DTW Framework with Hybrid Gait Symmetry Index for Real-Time Wearable Gait Classification
Gait symmetry analysis has emerged as an important tool in rehabilitation engineering and neurological disorder assessment, as it provides clinically relevant indicators of mobility impairment and gait abnormalities. The proposed framework integrates gait symmetry variability, statistical gait features and Dynamic Time Warping (DTW)-based temporal alignment to enhance robustness against gait variations and irregular walking patterns. A hybrid feature vector comprising DTW similarity scores, the hybrid gait symmetry index (GSI), and statistical gait descriptors was employed to classify gait patterns into five categories: normal, slow, medium, fast, and abnormal. The system was implemented as a wearable edge-computing platform using an NI myRIO device equipped with a tri-axial Inertial Measurement Unit (IMU) mounted on the subject’s body. The onboard FPGA performs real-time signal preprocessing, GSI computation, feature extraction, constrained DTW matching, and gait classification using fixed-point streaming architectures and BRAM-based buffering. Meanwhile, the embedded ARM processor manages TCP/IP communication and transmits real-time gait information to a remote monitoring workstation via a WiFi interface for visualization and analysis. Operating at a clock frequency of 100 MHz, the complete architecture achieves an end-to-end processing latency of approximately 4 ms. The proposed FPGA-based implementation provides low-latency, energy-efficient, and real-time gait analysis, making it well suited for wearable rehabilitation systems, assistive healthcare devices, and continuous mobility monitoring applications.
- Open Access
Hardware-Accelerated Non-Contact System for Sleep Disorder Monitoring and Analysis
This study analyzes human sleep disorders using non-contact approaches. The proposed approach analyzes periodic limb movement disorder (PLMD) under sleep conditions. This was conceptualized as data capture using a non-contact approach with ultrasonic sensors. The model was designed to estimate PLMD and classify it using real-time sleep data and a machine learning-based random forest classifier. Hardware schemes play a vital role in capturing sleep data in real time using ultrasonic sensors. A field-programmable gate array (FPGA)-based accelerator for a random forest classifier was designed to analyze PLMD. This is a novel approach that aids subjects in taking further medications. Verilog HDL was used for PLMD estimation using a Xilinx Vivado 2021.1 simulation and synthesis. The proposed method was validated using a Xilinx Zynq-7000 Zed board XC7Z020-CLG484.
Open AccessHardware-Accelerated Non-Contact System for Sleep Disorder Monitoring and Analysis
This study analyzes human sleep disorders using non-contact approaches. The proposed approach analyzes periodic limb movement disorder (PLMD) under sleep conditions. This was conceptualized as data capture using a non-contact approach with ultrasonic sensors. The model was designed to estimate PLMD and classify it using real-time sleep data and a machine learning-based random forest classifier. Hardware schemes play a vital role in capturing sleep data in real time using ultrasonic sensors. A field-programmable gate array (FPGA)-based accelerator for a random forest classifier was designed to analyze PLMD. This is a novel approach that aids subjects in taking further medications. Verilog HDL was used for PLMD estimation using a Xilinx Vivado 2021.1 simulation and synthesis. The proposed method was validated using a Xilinx Zynq-7000 Zed board XC7Z020-CLG484.
- Open Access
A Field-Programmable Gate Array-Based Adaptive Sleep Posture Analysis Accelerator for Real-Time Monitoring
This research presents a sleep posture monitoring system designed to assist the elderly and patient attendees. Monitoring sleep posture in real time is challenging, and this approach introduces hardware-based edge computation methods. Initially, we detected the postures using minimally optimized sensing modules and fusion techniques. This was achieved based on subject (human) data at standard and adaptive levels using posture-learning processing elements (PEs). Intermittent posture evaluation was performed with respect to static and adaptive PEs. The final stage was accomplished using the learned subject posture data versus the real-time posture data using posture classification. An FPGA-based Hierarchical Binary Classifier (HBC) algorithm was developed to learn and evaluate sleep posture in real time. The IoT and display devices were used to communicate the monitored posture to attendant/support services. Posture learning and analysis were developed using customized, reconfigurable VLSI architectures for sensor fusion, control, and communication modules in static and adaptive scenarios. The proposed algorithms were coded in Verilog HDL, simulated, and synthesized using VIVADO 2017.3. A Zed Board-based field-programmable gate array (FPGA) Xilinx board was used for experimental validation.
Open AccessA Field-Programmable Gate Array-Based Adaptive Sleep Posture Analysis Accelerator for Real-Time Monitoring
This research presents a sleep posture monitoring system designed to assist the elderly and patient attendees. Monitoring sleep posture in real time is challenging, and this approach introduces hardware-based edge computation methods. Initially, we detected the postures using minimally optimized sensing modules and fusion techniques. This was achieved based on subject (human) data at standard and adaptive levels using posture-learning processing elements (PEs). Intermittent posture evaluation was performed with respect to static and adaptive PEs. The final stage was accomplished using the learned subject posture data versus the real-time posture data using posture classification. An FPGA-based Hierarchical Binary Classifier (HBC) algorithm was developed to learn and evaluate sleep posture in real time. The IoT and display devices were used to communicate the monitored posture to attendant/support services. Posture learning and analysis were developed using customized, reconfigurable VLSI architectures for sensor fusion, control, and communication modules in static and adaptive scenarios. The proposed algorithms were coded in Verilog HDL, simulated, and synthesized using VIVADO 2017.3. A Zed Board-based field-programmable gate array (FPGA) Xilinx board was used for experimental validation.
- Open Access
Adaptive FPGA-Based Accelerators for Human–Robot Interaction in Indoor Environments
This study addresses the challenges of human–robot interactions in real-time environments with adaptive field-programmable gate array (FPGA)-based accelerators. Predicting human posture in indoor environments in confined areas is a significant challenge for service robots. The proposed approach works on two levels: the estimation of human location and the robot’s intention to serve based on the human’s location at static and adaptive positions. This paper presents three methodologies to address these challenges: binary classification to analyze static and adaptive postures for human localization in indoor environments using the sensor fusion method, adaptive Simultaneous Localization and Mapping (SLAM) for the robot to deliver the task, and human–robot implicit communication. VLSI hardware schemes are developed for the proposed method. Initially, the control unit processes real-time sensor data through PIR sensors and multiple ultrasonic sensors to analyze the human posture. Subsequently, static and adaptive human posture data are communicated to the robot via Wi-Fi. Finally, the robot performs services for humans using an adaptive SLAM-based triangulation navigation method. The experimental validation was conducted in a hospital environment. The proposed algorithms were coded in Verilog HDL, simulated, and synthesized using VIVADO 2017.3. A Zed-board-based FPGA Xilinx board was used for experimental validation.
Open AccessAdaptive FPGA-Based Accelerators for Human–Robot Interaction in Indoor Environments
This study addresses the challenges of human–robot interactions in real-time environments with adaptive field-programmable gate array (FPGA)-based accelerators. Predicting human posture in indoor environments in confined areas is a significant challenge for service robots. The proposed approach works on two levels: the estimation of human location and the robot’s intention to serve based on the human’s location at static and adaptive positions. This paper presents three methodologies to address these challenges: binary classification to analyze static and adaptive postures for human localization in indoor environments using the sensor fusion method, adaptive Simultaneous Localization and Mapping (SLAM) for the robot to deliver the task, and human–robot implicit communication. VLSI hardware schemes are developed for the proposed method. Initially, the control unit processes real-time sensor data through PIR sensors and multiple ultrasonic sensors to analyze the human posture. Subsequently, static and adaptive human posture data are communicated to the robot via Wi-Fi. Finally, the robot performs services for humans using an adaptive SLAM-based triangulation navigation method. The experimental validation was conducted in a hospital environment. The proposed algorithms were coded in Verilog HDL, simulated, and synthesized using VIVADO 2017.3. A Zed-board-based FPGA Xilinx board was used for experimental validation.
- Open Access
A Versatile Approach for Adaptive Grid Mapping and Grid Flex-Graph Exploration with a Field-Programmable Gate Array-Based Robot Using Hardware Schemes
Robotic exploration in dynamic and complex environments requires advanced adaptive mapping strategies to ensure accurate representation of the environments. This paper introduces an innovative grid flex-graph exploration (GFGE) algorithm designed for single-robot mapping. This hardware-scheme-based algorithm leverages a combination of quad-grid and graph structures to enhance the efficiency of both local and global mapping implemented on a field-programmable gate array (FPGA). This novel research work involved using sensor fusion to analyze a robot’s behavior and flexibility in the presence of static and dynamic objects. A behavior-based grid construction algorithm was proposed for the construction of a quad-grid that represents the occupancy of frontier cells. The selection of the next exploration target in a graph-like structure was proposed using partial reconfiguration-based frontier-graph exploration approaches. The complete exploration method handles the data when updating the local map to optimize the redundant exploration of previously explored nodes. Together, the exploration handles the quadtree-like structure efficiently under dynamic and uncertain conditions with a parallel processing architecture. Integrating several algorithms into indoor robotics was a complex process, and a Xilinx-based partial reconfiguration approach was used to prevent computing difficulties when running many algorithms simultaneously. These algorithms were developed, simulated, and synthesized using the Verilog hardware description language on Zynq SoC. Experiments were carried out utilizing a robot based on a field-programmable gate array (FPGA), and the resource utilization and power consumption of the device were analyzed.
Open AccessA Versatile Approach for Adaptive Grid Mapping and Grid Flex-Graph Exploration with a Field-Programmable Gate Array-Based Robot Using Hardware Schemes
Robotic exploration in dynamic and complex environments requires advanced adaptive mapping strategies to ensure accurate representation of the environments. This paper introduces an innovative grid flex-graph exploration (GFGE) algorithm designed for single-robot mapping. This hardware-scheme-based algorithm leverages a combination of quad-grid and graph structures to enhance the efficiency of both local and global mapping implemented on a field-programmable gate array (FPGA). This novel research work involved using sensor fusion to analyze a robot’s behavior and flexibility in the presence of static and dynamic objects. A behavior-based grid construction algorithm was proposed for the construction of a quad-grid that represents the occupancy of frontier cells. The selection of the next exploration target in a graph-like structure was proposed using partial reconfiguration-based frontier-graph exploration approaches. The complete exploration method handles the data when updating the local map to optimize the redundant exploration of previously explored nodes. Together, the exploration handles the quadtree-like structure efficiently under dynamic and uncertain conditions with a parallel processing architecture. Integrating several algorithms into indoor robotics was a complex process, and a Xilinx-based partial reconfiguration approach was used to prevent computing difficulties when running many algorithms simultaneously. These algorithms were developed, simulated, and synthesized using the Verilog hardware description language on Zynq SoC. Experiments were carried out utilizing a robot based on a field-programmable gate array (FPGA), and the resource utilization and power consumption of the device were analyzed.
- Open Access
Hardware Schemes for Smarter Indoor Robotics to Prevent the Backing Crash Framework Using Field Programmable Gate Array-Based Multi-Robots
The use of smart indoor robotics services is gradually increasing in real-time scenarios. This paper presents a versatile approach to multi-robot backing crash prevention in indoor environments, using hardware schemes to achieve greater competence. Here, sensor fusion was initially used to analyze the state of multi-robots and their orientation within a static or dynamic scenario. The proposed novel hardware scheme-based framework integrates both static and dynamic scenarios for the execution of backing crash prevention. A round-robin (RR) scheduling algorithm was composed for the static scenario. Dynamic backing crash prevention was deployed by embedding a first come, first served (FCFS) scheduling algorithm. The behavioral control mechanism of the distributed multi-robots was integrated with FCFS and adaptive cruise control (ACC) scheduling algorithms. The integration of multiple algorithms is a challenging task for smarter indoor robotics, and the Xilinx-based partial reconfiguration method was deployed to avoid computational issues with multiple algorithms during the run-time. These methods were coded with Verilog HDL and validated using an FPGA (Zynq)-based multi-robot system.
Open AccessHardware Schemes for Smarter Indoor Robotics to Prevent the Backing Crash Framework Using Field Programmable Gate Array-Based Multi-Robots
The use of smart indoor robotics services is gradually increasing in real-time scenarios. This paper presents a versatile approach to multi-robot backing crash prevention in indoor environments, using hardware schemes to achieve greater competence. Here, sensor fusion was initially used to analyze the state of multi-robots and their orientation within a static or dynamic scenario. The proposed novel hardware scheme-based framework integrates both static and dynamic scenarios for the execution of backing crash prevention. A round-robin (RR) scheduling algorithm was composed for the static scenario. Dynamic backing crash prevention was deployed by embedding a first come, first served (FCFS) scheduling algorithm. The behavioral control mechanism of the distributed multi-robots was integrated with FCFS and adaptive cruise control (ACC) scheduling algorithms. The integration of multiple algorithms is a challenging task for smarter indoor robotics, and the Xilinx-based partial reconfiguration method was deployed to avoid computational issues with multiple algorithms during the run-time. These methods were coded with Verilog HDL and validated using an FPGA (Zynq)-based multi-robot system.
- 15 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24  (6) , 8821-8834
Geometry-Based Parking Assistance Using Sensor Fusion for Robots With Hardware Schemes
Mobile robots parking in indoor environments, trending towards complex problems, has motivated the development of new hardware computational paradigms. In this paper, we present a novel and effective research for addressing parking assistance in slot identification based on the geometry of a mobile robots using sensor data fusion with hardware schemes. This paper has been abstracted into three levels. Initially, the geometry of the mobile robots was analyzed using multi-sensory fusion at the gateway and parking slots of the indoor environment. A heuristic algorithm was developed to analyze the vehicle geometry patterns. Reconfigurable computing architectures have been developed for geometry analysis with respect to measurements of individuals or groups of robots as leader-follower and rendezvous approaches. The next level of the proposed algorithm estimates the availability of parking slots as per mobile robots geometry using a customized accelerator approach. Mobile robots navigate parking spaces using parking assistance and environmental maps. Parking assistance is integrated with direction-based path planning and odometer techniques are embedded in a known environmental navigation map. A Zynq XC7Z020-CLG484-1 Field Programmable Gate Array (FPGA) was deployed to validate and implemented the design using Xilinx Vivado 2017.4. This paper presents essential information for indoor logistics industries, hospital services, and domestic services at home.
- 15 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24  (6) , 8821-8834
Geometry-Based Parking Assistance Using Sensor Fusion for Robots With Hardware Schemes
Mobile robots parking in indoor environments, trending towards complex problems, has motivated the development of new hardware computational paradigms. In this paper, we present a novel and effective research for addressing parking assistance in slot identification based on the geometry of a mobile robots using sensor data fusion with hardware schemes. This paper has been abstracted into three levels. Initially, the geometry of the mobile robots was analyzed using multi-sensory fusion at the gateway and parking slots of the indoor environment. A heuristic algorithm was developed to analyze the vehicle geometry patterns. Reconfigurable computing architectures have been developed for geometry analysis with respect to measurements of individuals or groups of robots as leader-follower and rendezvous approaches. The next level of the proposed algorithm estimates the availability of parking slots as per mobile robots geometry using a customized accelerator approach. Mobile robots navigate parking spaces using parking assistance and environmental maps. Parking assistance is integrated with direction-based path planning and odometer techniques are embedded in a known environmental navigation map. A Zynq XC7Z020-CLG484-1 Field Programmable Gate Array (FPGA) was deployed to validate and implemented the design using Xilinx Vivado 2017.4. This paper presents essential information for indoor logistics industries, hospital services, and domestic services at home.
- Open Access
A Versatile Approach to Polygonal Object Avoidance in Indoor Environments with Hardware Schemes Using an FPGA-Based Multi-Robot
Service robots perform versatile functions in indoor environments. This study focuses on obstacle avoidance using flock-type indoor-based multi-robots. Each robot was developed with rendezvous behavior and distributed intelligence to perform obstacle avoidance. The hardware scheme-based obstacle-avoidance algorithm was developed using a bio-inspired flock approach, which was developed with three stages. Initially, the algorithm estimates polygonal obstacles and their orientations. The second stage involves performing avoidance at different orientations of obstacles using a heuristic based Bug2 algorithm. The final stage involves performing a flock rendezvous with distributed approaches and linear movements using a behavioral control mechanism. VLSI architectures were developed for multi-robot obstacle avoidance algorithms and were coded using Verilog HDL. The novel design of this article integrates the multi-robot’s obstacle approaches with behavioral control and hardware scheme-based partial reconfiguration (PR) flow. The experiments were validated using FPGA-based multi-robots.
Open AccessA Versatile Approach to Polygonal Object Avoidance in Indoor Environments with Hardware Schemes Using an FPGA-Based Multi-Robot
Service robots perform versatile functions in indoor environments. This study focuses on obstacle avoidance using flock-type indoor-based multi-robots. Each robot was developed with rendezvous behavior and distributed intelligence to perform obstacle avoidance. The hardware scheme-based obstacle-avoidance algorithm was developed using a bio-inspired flock approach, which was developed with three stages. Initially, the algorithm estimates polygonal obstacles and their orientations. The second stage involves performing avoidance at different orientations of obstacles using a heuristic based Bug2 algorithm. The final stage involves performing a flock rendezvous with distributed approaches and linear movements using a behavioral control mechanism. VLSI architectures were developed for multi-robot obstacle avoidance algorithms and were coded using Verilog HDL. The novel design of this article integrates the multi-robot’s obstacle approaches with behavioral control and hardware scheme-based partial reconfiguration (PR) flow. The experiments were validated using FPGA-based multi-robots.
- Open Access
Hardware-Efficient Scheme for Trailer Robot Parking by Truck Robot in an Indoor Environment with Rendezvous
Autonomous grounded vehicle-based social assistance/service robot parking in an indoor environment is an exciting challenge in urban cities. There are few efficient methods for parking multi-robot/agent teams in an unknown indoor environment. The primary objective of autonomous multi-robot/agent teams is to establish synchronization between them and to stay in behavioral control when static and when in motion. In this regard, the proposed hardware-efficient algorithm addresses the parking of a trailer (follower) robot in indoor environments by a truck (leader) robot with a rendezvous approach. In the process of parking, initial rendezvous behavioral control between the truck and trailer robots is established. Next, the parking space in the environment is estimated by the truck robot, and the trailer robot parks under the supervision of the truck robot. The proposed behavioral control mechanisms were executed between heterogenous-type computational-based robots. Optimized sensors were used for traversing and the execution of the parking methods. The truck robot leads, and the trailer robot mimics the actions in the execution of path planning and parking. The truck robot was integrated with FPGA (Xilinx Zynq XC7Z020-CLG484-1), and the trailer was integrated with Arduino UNO computing devices; this heterogenous modeling is adequate in the execution of trailer parking by a truck. The hardware schemes were developed using Verilog HDL for the FPGA (truck)-based robot and Python for the Arduino (trailer)-based robot.
Open AccessHardware-Efficient Scheme for Trailer Robot Parking by Truck Robot in an Indoor Environment with Rendezvous
Autonomous grounded vehicle-based social assistance/service robot parking in an indoor environment is an exciting challenge in urban cities. There are few efficient methods for parking multi-robot/agent teams in an unknown indoor environment. The primary objective of autonomous multi-robot/agent teams is to establish synchronization between them and to stay in behavioral control when static and when in motion. In this regard, the proposed hardware-efficient algorithm addresses the parking of a trailer (follower) robot in indoor environments by a truck (leader) robot with a rendezvous approach. In the process of parking, initial rendezvous behavioral control between the truck and trailer robots is established. Next, the parking space in the environment is estimated by the truck robot, and the trailer robot parks under the supervision of the truck robot. The proposed behavioral control mechanisms were executed between heterogenous-type computational-based robots. Optimized sensors were used for traversing and the execution of the parking methods. The truck robot leads, and the trailer robot mimics the actions in the execution of path planning and parking. The truck robot was integrated with FPGA (Xilinx Zynq XC7Z020-CLG484-1), and the trailer was integrated with Arduino UNO computing devices; this heterogenous modeling is adequate in the execution of trailer parking by a truck. The hardware schemes were developed using Verilog HDL for the FPGA (truck)-based robot and Python for the Arduino (trailer)-based robot.
- 19 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
HEAP-SORT on Dual Port RAM Based FPGA
Often, sorting is a crucial step in the data processing process. It is possible to employ software implementations in numerous apps that are generally accessible in both paid and unpaid versions. But in some high-speed applications, sorting should be done in hardware, making use of the possibility of parallel processing. The Heapsort is one of the algorithms with the best complexity O(n*log(n)). Our approach is based on the implementation of the Heapsort algorithm, which makes use of dual port random access memory (DP RAM), a hardware feature of contemporary Field-Programmable Gate Array (FPGA) processors, to implement effective sorting of a data stream. The complexity of the sorter is inversely correlated with the sorter capacity due to effective use of FPGA resources.
- 19 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
HEAP-SORT on Dual Port RAM Based FPGA
Often, sorting is a crucial step in the data processing process. It is possible to employ software implementations in numerous apps that are generally accessible in both paid and unpaid versions. But in some high-speed applications, sorting should be done in hardware, making use of the possibility of parallel processing. The Heapsort is one of the algorithms with the best complexity O(n*log(n)). Our approach is based on the implementation of the Heapsort algorithm, which makes use of dual port random access memory (DP RAM), a hardware feature of contemporary Field-Programmable Gate Array (FPGA) processors, to implement effective sorting of a data stream. The complexity of the sorter is inversely correlated with the sorter capacity due to effective use of FPGA resources.