Raja Amer Azim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Raja Amer Azim has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Fahad Mumtaz Malik
Department of Electrical Engineering, College of Electrical and Mechanical Engineering, National University of Sciences and Technology, Islamabad, Pakistan
4 shared publications - Abid Raza
Department of Electrical Engineering, CEME, National University of Sciences and Technology, Islamabad 46000, Pakistan
3 shared publications - Hameed Ullah
University of Naples Federico II,Department of Electrical Engineering and Information Technology,Naples,Italy
3 shared publications - Naveed Mazhar
College of Electrical and Mechanical Engineering, National University of Sciences and Technology, Islamabad, Pakistan
3 shared publications - Rameez Khan
Department of Electrical Engineering, CEME, National University of Sciences and Technology, Islamabad 46000, Pakistan
3 shared publications - Amir Khan1 shared publication
Latest Publications
- Open Access
- 5 March 2026
- Published by Elsevier in SSRN Electronic Journal
The effect of Reynolds number on Aerodynamic and Aeroacoustic Performance of da Vinci’s Aerial Screw for UAV Applications
The proliferation of unmanned aerial vehicles (UAVs) and vertical take-off and landing (VTOL) aircraft has intensified the demand for efficient propellers with low noise emissions, which originate from blade rotation and flow-field turbulence. The low-altitude operations of these vehicles present a critical challenge in balancing aerodynamic and aeroacoustic performance, as both are directly affected by the efficiency of the propulsion system. In the present study, a numerical investigation is conducted to analyze the effect of Reynolds number (Re) on the aerodynamic and aeroacoustic performance of an aerial screw. Numerical simulations are performed at Reynolds numbers of 536, 2680, and 4825, corresponding to rotational speeds of 500, 2500, and 4500 rpm, respectively. The analysis quantifies the contributions of tonal and broadband noise components, in conjunction with the aerodynamic performance at these Reynolds numbers. Aerodynamic simulations are coupled with the Ffowcs Williams-Hawkings (FW-H) acoustic analogy to predict acoustic characteristics. Simulation results showed that the rotor's noise level increased by 60.5% between 500 and 2500 rpm and by 11% between 2500 and 4500 rpm, while the aerodynamic thrust increased from 0.013 N to 0.38 N over the first interval and reaching 1.11 N at 4500 rpm. Aeroacoustic simulations confirm the rotor's tonal noise peaks at 75.08 dB at the fundamental blade passing frequency (BPF) for Re=4825, which scales proportionally with the Reynolds number. Furthermore, the directivity pattern of the overall sound pressure level (OASPL) shows a peak emission of 83.35 dB at Re=4825, measured at a distance of four radii from the center of the aerial screw.
- 5 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessThe effect of Reynolds number on Aerodynamic and Aeroacoustic Performance of da Vinci’s Aerial Screw for UAV Applications
The proliferation of unmanned aerial vehicles (UAVs) and vertical take-off and landing (VTOL) aircraft has intensified the demand for efficient propellers with low noise emissions, which originate from blade rotation and flow-field turbulence. The low-altitude operations of these vehicles present a critical challenge in balancing aerodynamic and aeroacoustic performance, as both are directly affected by the efficiency of the propulsion system. In the present study, a numerical investigation is conducted to analyze the effect of Reynolds number (Re) on the aerodynamic and aeroacoustic performance of an aerial screw. Numerical simulations are performed at Reynolds numbers of 536, 2680, and 4825, corresponding to rotational speeds of 500, 2500, and 4500 rpm, respectively. The analysis quantifies the contributions of tonal and broadband noise components, in conjunction with the aerodynamic performance at these Reynolds numbers. Aerodynamic simulations are coupled with the Ffowcs Williams-Hawkings (FW-H) acoustic analogy to predict acoustic characteristics. Simulation results showed that the rotor's noise level increased by 60.5% between 500 and 2500 rpm and by 11% between 2500 and 4500 rpm, while the aerodynamic thrust increased from 0.013 N to 0.38 N over the first interval and reaching 1.11 N at 4500 rpm. Aeroacoustic simulations confirm the rotor's tonal noise peaks at 75.08 dB at the fundamental blade passing frequency (BPF) for Re=4825, which scales proportionally with the Reynolds number. Furthermore, the directivity pattern of the overall sound pressure level (OASPL) shows a peak emission of 83.35 dB at Re=4825, measured at a distance of four radii from the center of the aerial screw.
- Open Access
- 11 January 2024
- Published by Wiley in Complexity
- Vol. 2024, 1-12
Robust Decentralized Formation Tracking Control of Complex Multiagent Systems
This article investigates the decentralized formation tracking problem for complex multiagent systems in finite settling time, subjected to output constraints and external disturbances. The barrier Lyapunov function is used to constrain the output of each agent. Therefore, starting inside a closed boundary, the agents are guaranteed to remain inside it for all future time. Under directed communication topology, decentralized time-varying formation tracking is achieved in finite time. Furthermore, in the proposed work, the linear sliding manifold is employed to mitigate the singularity problem that occurs in the conventional robust finite-time methods, i.e., terminal sliding mode-based control schemes. The stability properties of the proposed framework are established through the Lyapunov method which not only ensures the finite-time formation tracking of nonlinear multiagent systems under directed communication but also guarantees that for all time the agents remain inside a closed boundary if they are initially inside it. Consequently, the uniqueness of this article is that it presents a novel formation tracking control framework for multiagent systems that simultaneously considers three performance metrics of robustness, finite-time convergence, and output constraints while mitigating the singularity problem. The proposed topology is validated by implementing the numerical examples in MATLAB/SIMULINK.
- 11 January 2024
- Published by Wiley in Complexity
- Vol. 2024, 1-12
Open AccessRobust Decentralized Formation Tracking Control of Complex Multiagent Systems
This article investigates the decentralized formation tracking problem for complex multiagent systems in finite settling time, subjected to output constraints and external disturbances. The barrier Lyapunov function is used to constrain the output of each agent. Therefore, starting inside a closed boundary, the agents are guaranteed to remain inside it for all future time. Under directed communication topology, decentralized time-varying formation tracking is achieved in finite time. Furthermore, in the proposed work, the linear sliding manifold is employed to mitigate the singularity problem that occurs in the conventional robust finite-time methods, i.e., terminal sliding mode-based control schemes. The stability properties of the proposed framework are established through the Lyapunov method which not only ensures the finite-time formation tracking of nonlinear multiagent systems under directed communication but also guarantees that for all time the agents remain inside a closed boundary if they are initially inside it. Consequently, the uniqueness of this article is that it presents a novel formation tracking control framework for multiagent systems that simultaneously considers three performance metrics of robustness, finite-time convergence, and output constraints while mitigating the singularity problem. The proposed topology is validated by implementing the numerical examples in MATLAB/SIMULINK.
- Open Access
- 30 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 36518-36537
Fixed Settling Time Control for Self-Driving Car: Two-Timescales Approach
This article involves the design of a novel path tracking control technique for the self-driving car. Fixed settling time sliding mode control (FSTSMC) with barrier Lyapunov function is implemented to deal with the non-linear lateral dynamics and to ensure stable standard double-lane-change (DLC) maneuver of self-driving cars in the presence of unknown lateral tire forces and parametric uncertainties. A two-time scale-based approach is employed to deal with the slow and fast dynamics of the car separately. The proposed control scheme efficacy is investigated using simulations based on CarSim and Simulink. The simulation results validate the path-tracking ability of the proposed controller for self-driving cars while accomplishing the stable double-lane-change maneuver at various forward speeds.
- 30 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 36518-36537
Open AccessFixed Settling Time Control for Self-Driving Car: Two-Timescales Approach
This article involves the design of a novel path tracking control technique for the self-driving car. Fixed settling time sliding mode control (FSTSMC) with barrier Lyapunov function is implemented to deal with the non-linear lateral dynamics and to ensure stable standard double-lane-change (DLC) maneuver of self-driving cars in the presence of unknown lateral tire forces and parametric uncertainties. A two-time scale-based approach is employed to deal with the slow and fast dynamics of the car separately. The proposed control scheme efficacy is investigated using simulations based on CarSim and Simulink. The simulation results validate the path-tracking ability of the proposed controller for self-driving cars while accomplishing the stable double-lane-change maneuver at various forward speeds.
- Open Access
- 24 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 50513-50522
Robust Control Framework for Lateral Dynamics of Autonomous Vehicle Using Barrier Lyapunov Function
This article presents the robust lateral control of an autonomous vehicle in the presence of unknown lateral tire forces, road curvature angle, and parametric uncertainties. The sliding mode control (SMC) with barrier Lyapunov function is implemented to guarantee the system robustness while maintaining the outputs of the system in realistic bounds. Following the model reduction approach, the slow and fast dynamics of the system are separately controlled using the proposed control technique. The efficacy of the proposed control technique is examined by comparing the simulation results with conventional sliding mode control in two-time scales.
- 24 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 50513-50522
Open AccessRobust Control Framework for Lateral Dynamics of Autonomous Vehicle Using Barrier Lyapunov Function
This article presents the robust lateral control of an autonomous vehicle in the presence of unknown lateral tire forces, road curvature angle, and parametric uncertainties. The sliding mode control (SMC) with barrier Lyapunov function is implemented to guarantee the system robustness while maintaining the outputs of the system in realistic bounds. Following the model reduction approach, the slow and fast dynamics of the system are separately controlled using the proposed control technique. The efficacy of the proposed control technique is examined by comparing the simulation results with conventional sliding mode control in two-time scales.
- Open Access
- 23 February 2015
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2015, 1-9
Rollover Mitigation Controller Development for Three-Wheeled Vehicle Using Active Front Steering
Three-wheeled vehicles are agile, less complex, but relatively more prone to rollover. The current study focuses on the rollover mitigation control design using active front steering for such vehicles. A lateral load transfer ratio (LLTR) adapted for a three-wheeled platform is presented. Sliding mode control design strategy has been devised which results in pseudo-direct control for roll dynamics of the vehicle. The lag in vehicle roll angle response has been managed using adaptive sliding surface. This concept can be extended for other vehicle configurations. The proposed control scheme is investigated for efficacy using a full vehicle simulation model of CarSim software and National Highway Traffic Safety Administration’s proposed Fishhook maneuver. The controller is able to limit the rollover propensity even with vehicle parameter uncertainties.
- 23 February 2015
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2015, 1-9
Open AccessRollover Mitigation Controller Development for Three-Wheeled Vehicle Using Active Front Steering
Three-wheeled vehicles are agile, less complex, but relatively more prone to rollover. The current study focuses on the rollover mitigation control design using active front steering for such vehicles. A lateral load transfer ratio (LLTR) adapted for a three-wheeled platform is presented. Sliding mode control design strategy has been devised which results in pseudo-direct control for roll dynamics of the vehicle. The lag in vehicle roll angle response has been managed using adaptive sliding surface. This concept can be extended for other vehicle configurations. The proposed control scheme is investigated for efficacy using a full vehicle simulation model of CarSim software and National Highway Traffic Safety Administration’s proposed Fishhook maneuver. The controller is able to limit the rollover propensity even with vehicle parameter uncertainties.