Ufuk Uçan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ufuk Uçan has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Halil Demir
Akdeniz Universitesi
4 shared publications Andaç Kutay Saka
Department of Horticulture, Agricultural Faculty, Ordu University, Antalya, Turkey
2 shared publications- Atnan Uğur
Ordu University, Turkey
2 shared publications - Ilker Sonmez
Faculty of Agriculture, Department of Soil Science, Plant Nutrition, Akdeniz University, Antalya 07070, Türkiye
2 shared publications İsmail Hakkı Akgün
Department of Plant Production, Elmalı Vocational School, Akdeniz University, Antalya, Turkey
2 shared publications- İsmail Hakkı Akgün
Department of Plant and Animal Production, Elmalı Vocational School, Akdeniz University, Antalya 07070, Turkey
2 shared publications
Latest Publications
- Open Access
- 6 November 2025
- Published by Springer Nature in BMC Plant Biology
- Vol. 25 (1) , 1-19
Ameliorative effects of biofertilizers on yield, water use efficiency and quality of bean under drought stress conditions
The use of Plant Growth-Promoting Rhizobacteria (PGPR) is one of the alternative strategies to mitigate the effects of drought. This study aimed to determine the effects of the Partial Root-Zone Drying (PRD) and conventional deficit irrigation techniques on dwarf bean by reducing drought stress through microbial fertilizer applications. The parameters evaluated included yield, plant water consumption, water use efficiency (WUE), irrigation water use efficiency (IWUE), plant growth characteristics, chlorophyll content and biochemical properties. The Gina dwarf bean variety (Phaseolus vulgaris L. cv. Gina) was used in the research conducted at Akdeniz University. Biofertilizers consisting of Pantoea agglomerans RK-92, Paenibacillus polymyxa TV-12E, Bacillus megaterium TV-6D and Pseudomonas fluorescens FDG-37 bacterial strains were supplied by Atatürk University Plant Protection Department. The study was planned with and without biofertilizer (BF) application, and five irrigation treatments were considered. Three conventional irrigation treatments were applied: 100% of the evaporation (I100), 75% of the evaporation (I75), and 50% of the evaporation (I50). And, two treatments were applied to Partial Root Zone Drying (PRD): 75% of the evaporation (PRD75) and 50% of the evaporation (PRD50). According to the research results, remarkable results were obtained from the biofertilizer treatments. The highest first-class (8.44 t ha−1) and total yield (10.50 t ha−1) was recorded from the BF-I100 treatment. Compared to the control treatment (I100) with a first-class yield of 4.40 t ha−1 and a total yield of 9.31 t ha−1, the BF-I100 treatment provided a 14.5% higher first-class yield and a 12.78% higher total yield. Similarly, compared to the control, the BF-I75 resulted in higher first-class (7.36 t ha−1; 6.6%) and total yields (9.34 t ha−1; 9.88%). Among the deficit irrigation treatments, the highest total yield was recorded in the BF-PRD75 (9.54 t ha−1) treatment with biofertilizer. The total yield obtained from BF-PRD75 was 2.47% higher than that of the I100 treatment and was one of the most striking results. The BF-PRD50 treatment exhibited the highest WUE (11.26 kg m−3) and IWUE (13.88 kg m−3) for both first-class and total yield, with no statistically significant differences among BF-I50, BF-I100, and BF-PRD50 treatments. In conclusion, growth, yield, and quality characteristics were significantly influenced by the irrigation treatments. Biofertilizer applications were effective under both optimized and deficit irrigation conditions. The ameliorative and drought-reducing effects of biofertilizer treatments were clearly observed. This study found that biofertilizers positively impact yield and quality, potentially enabling water savings of 25–50%. They can be effectively used in regions with drought-related water shortages.
- 6 November 2025
- Published by Springer Nature in BMC Plant Biology
- Vol. 25 (1) , 1-19
Open AccessAmeliorative effects of biofertilizers on yield, water use efficiency and quality of bean under drought stress conditions
The use of Plant Growth-Promoting Rhizobacteria (PGPR) is one of the alternative strategies to mitigate the effects of drought. This study aimed to determine the effects of the Partial Root-Zone Drying (PRD) and conventional deficit irrigation techniques on dwarf bean by reducing drought stress through microbial fertilizer applications. The parameters evaluated included yield, plant water consumption, water use efficiency (WUE), irrigation water use efficiency (IWUE), plant growth characteristics, chlorophyll content and biochemical properties. The Gina dwarf bean variety (Phaseolus vulgaris L. cv. Gina) was used in the research conducted at Akdeniz University. Biofertilizers consisting of Pantoea agglomerans RK-92, Paenibacillus polymyxa TV-12E, Bacillus megaterium TV-6D and Pseudomonas fluorescens FDG-37 bacterial strains were supplied by Atatürk University Plant Protection Department. The study was planned with and without biofertilizer (BF) application, and five irrigation treatments were considered. Three conventional irrigation treatments were applied: 100% of the evaporation (I100), 75% of the evaporation (I75), and 50% of the evaporation (I50). And, two treatments were applied to Partial Root Zone Drying (PRD): 75% of the evaporation (PRD75) and 50% of the evaporation (PRD50). According to the research results, remarkable results were obtained from the biofertilizer treatments. The highest first-class (8.44 t ha−1) and total yield (10.50 t ha−1) was recorded from the BF-I100 treatment. Compared to the control treatment (I100) with a first-class yield of 4.40 t ha−1 and a total yield of 9.31 t ha−1, the BF-I100 treatment provided a 14.5% higher first-class yield and a 12.78% higher total yield. Similarly, compared to the control, the BF-I75 resulted in higher first-class (7.36 t ha−1; 6.6%) and total yields (9.34 t ha−1; 9.88%). Among the deficit irrigation treatments, the highest total yield was recorded in the BF-PRD75 (9.54 t ha−1) treatment with biofertilizer. The total yield obtained from BF-PRD75 was 2.47% higher than that of the I100 treatment and was one of the most striking results. The BF-PRD50 treatment exhibited the highest WUE (11.26 kg m−3) and IWUE (13.88 kg m−3) for both first-class and total yield, with no statistically significant differences among BF-I50, BF-I100, and BF-PRD50 treatments. In conclusion, growth, yield, and quality characteristics were significantly influenced by the irrigation treatments. Biofertilizer applications were effective under both optimized and deficit irrigation conditions. The ameliorative and drought-reducing effects of biofertilizer treatments were clearly observed. This study found that biofertilizers positively impact yield and quality, potentially enabling water savings of 25–50%. They can be effectively used in regions with drought-related water shortages.
- Open Access
- 19 December 2024
- Published by Springer Nature in BMC Plant Biology
- Vol. 24 (1) , 1-17
Impact of effective micro-organisms (EM) on the yield, growth and bio-chemical properties of lettuce when applied to soil and leaves
In today’s conditions, it is not possible to eliminate chemical inputs without reducing food production. Therefore, integrated methods that reduce the negative effects of chemical inputs are needed. One of the alternatives is the use of beneficial bacteria, which can both improve the yield and quality of vegetable crops and reduce the use of chemical fertilisers. This research was carried out to test the effects of a microbial fertiliser combined with inorganic fertiliser on the growth, biochemical properties and yield of lettuce and whether the use of chemical fertilisers could be reduced. Caipira curly lettuce variety was used as plant material. The microbial fertilizer used contains 7 different microorganisms and 2 different yeasts. The experiment consisted of eight treatments: Control (T0), 100% Chemical Fertilisation (T1), 50% Chemical Fertilisation + Microbial Fertilisation (T2), 75% Chemical Fertilisation + Microbial Fertilization (T3), 100% Chemical Fertilisation + Microbial Fertilisation (T4), Microbial Fertilisation Alone (T5), 50% Chemical Fertilisation + Microbial Fertilisation + Foliar Microbial Fertilisation (T6), 75% Chemical Fertilisation + Microbial Fertilisation + Foliar Microbial Fertilisation (T7). The results of the research were statistically evaluated using analysis of variance at a significance level of p < 0.05, and the means were compared using the LSD test. It was observed that the microbial fertiliser did not adversely effect on the growth characteristics of lettuce and even had an ameliorative effect. The highest root dry weights were obtained in the T7, T3, T4 and T1 treatments. T7 treatment had 7.8% and 5.5% more dry weight than T1 and T4 respectively. Biochemical properties were significantly affected by treatments and it was significant that T2 and T4 had similar results. Because chemical fertilizer dose was reduced by 50% in the T2 treatment. The chemical fertiliser dose was reduced by 50% in the T2 treatment. Microbial fertiliser treatments had no negative effect on lettuce colour formation and even greener lettuces were harvested from T1, T7, T3 and T6 treatments. The highest total yield was obtained from T3 (30638.89 kg ha− 1) and T7 (30518.52 kg ha− 1). In other words, when the recommended dose of chemical fertiliser was reduced by 25%, higher yields were obtained. The yields in T3 and T7 were 6.71% and 6.29% higher than in T1, respectively. The marketable yield did not differ statistically between treatments except T0 and T5. Although there was no statistical difference, the highest numerical values belonged to the T7 (28907.41 kg ha− 1) and T3 (28814.82 kg ha− 1) treatments. In terms of marketable yield, T7 and T3 treatments gave 5.05% and 4.71% more than T1, respectively. It was determined that the microbial fertiliser used had no negative effect on the lettuce crop and even had an ameliorative effect. With the use of microbial fertiliser, both chemical fertilisation was reduced and higher yield and quality values were obtained from T3 and T7 treatments compared to chemical treatment alone (T1). In addition, the ameliorative effects of the foliar application of microbial fertiliser were also noted in the T7 treatment. As a result, this study showed that the use of microbial fertiliser could increase yield and quality and save at least 25% of fertiliser.
- 19 December 2024
- Published by Springer Nature in BMC Plant Biology
- Vol. 24 (1) , 1-17
Open AccessImpact of effective micro-organisms (EM) on the yield, growth and bio-chemical properties of lettuce when applied to soil and leaves
In today’s conditions, it is not possible to eliminate chemical inputs without reducing food production. Therefore, integrated methods that reduce the negative effects of chemical inputs are needed. One of the alternatives is the use of beneficial bacteria, which can both improve the yield and quality of vegetable crops and reduce the use of chemical fertilisers. This research was carried out to test the effects of a microbial fertiliser combined with inorganic fertiliser on the growth, biochemical properties and yield of lettuce and whether the use of chemical fertilisers could be reduced. Caipira curly lettuce variety was used as plant material. The microbial fertilizer used contains 7 different microorganisms and 2 different yeasts. The experiment consisted of eight treatments: Control (T0), 100% Chemical Fertilisation (T1), 50% Chemical Fertilisation + Microbial Fertilisation (T2), 75% Chemical Fertilisation + Microbial Fertilization (T3), 100% Chemical Fertilisation + Microbial Fertilisation (T4), Microbial Fertilisation Alone (T5), 50% Chemical Fertilisation + Microbial Fertilisation + Foliar Microbial Fertilisation (T6), 75% Chemical Fertilisation + Microbial Fertilisation + Foliar Microbial Fertilisation (T7). The results of the research were statistically evaluated using analysis of variance at a significance level of p < 0.05, and the means were compared using the LSD test. It was observed that the microbial fertiliser did not adversely effect on the growth characteristics of lettuce and even had an ameliorative effect. The highest root dry weights were obtained in the T7, T3, T4 and T1 treatments. T7 treatment had 7.8% and 5.5% more dry weight than T1 and T4 respectively. Biochemical properties were significantly affected by treatments and it was significant that T2 and T4 had similar results. Because chemical fertilizer dose was reduced by 50% in the T2 treatment. The chemical fertiliser dose was reduced by 50% in the T2 treatment. Microbial fertiliser treatments had no negative effect on lettuce colour formation and even greener lettuces were harvested from T1, T7, T3 and T6 treatments. The highest total yield was obtained from T3 (30638.89 kg ha− 1) and T7 (30518.52 kg ha− 1). In other words, when the recommended dose of chemical fertiliser was reduced by 25%, higher yields were obtained. The yields in T3 and T7 were 6.71% and 6.29% higher than in T1, respectively. The marketable yield did not differ statistically between treatments except T0 and T5. Although there was no statistical difference, the highest numerical values belonged to the T7 (28907.41 kg ha− 1) and T3 (28814.82 kg ha− 1) treatments. In terms of marketable yield, T7 and T3 treatments gave 5.05% and 4.71% more than T1, respectively. It was determined that the microbial fertiliser used had no negative effect on the lettuce crop and even had an ameliorative effect. With the use of microbial fertiliser, both chemical fertilisation was reduced and higher yield and quality values were obtained from T3 and T7 treatments compared to chemical treatment alone (T1). In addition, the ameliorative effects of the foliar application of microbial fertiliser were also noted in the T7 treatment. As a result, this study showed that the use of microbial fertiliser could increase yield and quality and save at least 25% of fertiliser.
- Open Access
Yield and Yield Parameters Response of Cabbage to Partial Root Drying and Conventional Deficit Irrigation
Irrigation is one of the most important cultural practices in sustainable cabbage cultivation. While most studies on irrigation in cabbage have focused on conventional deficit irrigation (DI) practices, some plants’ water requirements under the partial root drying (PRD) technique are not yet very clear. In this study, the possible responses of cabbage, such as growth, some quality, yield, yield parameters, water use efficiency (WUE), irrigation water use efficiency (IWUE), and yield response factor (ky), were investigated at four irrigation water levels (125%, 100%, 75%, and 50%) with DI and PRD techniques for 2 years. Irrigation treatments were carried out by the drip irrigation method, and the amount of irrigation water for the control (I-100) was calculated using the measurements taken from the Class-A evaporation container. A total of eight irrigation treatments—four conventional deficit irrigation (I-125, I-100, I-75, I-50) and four partial root drying (PRD-125, PRD-100, PRD75, PRD-50)—were considered in the study. ET values were determined between 47.69–60.78 mm in the first year and 80.11–101.37 mm in the second year. Total and marketable yield values, WUE and IWUE values, were significantly affected by the irrigation treatments. As a result of the research, the highest total and marketable yields were found in I-125, PRD-125, I-100, and PRD-100 treatments. It was important that WUE and IWUE values reached their highest levels in full irrigation and 25% more irrigation treatments as well as in deficit irrigation treatments. In conditions where irrigation water is scarce and expensive, I-75 and PRD-75 applications are also recommended. While an increase in cabbage head height and diameter was observed with increasing irrigation water level, SSC and L values increased at deficit irrigations. According to the correlation coefficients, a positive relationship was determined between marketable yield and head and stem diameter, head height, WUE, and ET for marketable yield. In addition, it was predicted that I-50 and PRD-50 treatments may also be advantageous if the “kc” plant coefficient cover percentage was increased.
Open AccessYield and Yield Parameters Response of Cabbage to Partial Root Drying and Conventional Deficit Irrigation
Irrigation is one of the most important cultural practices in sustainable cabbage cultivation. While most studies on irrigation in cabbage have focused on conventional deficit irrigation (DI) practices, some plants’ water requirements under the partial root drying (PRD) technique are not yet very clear. In this study, the possible responses of cabbage, such as growth, some quality, yield, yield parameters, water use efficiency (WUE), irrigation water use efficiency (IWUE), and yield response factor (ky), were investigated at four irrigation water levels (125%, 100%, 75%, and 50%) with DI and PRD techniques for 2 years. Irrigation treatments were carried out by the drip irrigation method, and the amount of irrigation water for the control (I-100) was calculated using the measurements taken from the Class-A evaporation container. A total of eight irrigation treatments—four conventional deficit irrigation (I-125, I-100, I-75, I-50) and four partial root drying (PRD-125, PRD-100, PRD75, PRD-50)—were considered in the study. ET values were determined between 47.69–60.78 mm in the first year and 80.11–101.37 mm in the second year. Total and marketable yield values, WUE and IWUE values, were significantly affected by the irrigation treatments. As a result of the research, the highest total and marketable yields were found in I-125, PRD-125, I-100, and PRD-100 treatments. It was important that WUE and IWUE values reached their highest levels in full irrigation and 25% more irrigation treatments as well as in deficit irrigation treatments. In conditions where irrigation water is scarce and expensive, I-75 and PRD-75 applications are also recommended. While an increase in cabbage head height and diameter was observed with increasing irrigation water level, SSC and L values increased at deficit irrigations. According to the correlation coefficients, a positive relationship was determined between marketable yield and head and stem diameter, head height, WUE, and ET for marketable yield. In addition, it was predicted that I-50 and PRD-50 treatments may also be advantageous if the “kc” plant coefficient cover percentage was increased.
- Open Access
Biofertilizers Improve the Plant Growth, Yield, and Mineral Concentration of Lettuce and Broccoli
Biofertilizers and organic fertilizers are eco-friendly treatments that reduce the consumption and problems associated with chemical fertilizers. The aim of this research was to investigate the effects of biofertilizers and organic fertilizers on reducing consumption and improving the effectiveness of chemical fertilizer treatments by comparing the growth parameters, yield, quality criteria, and nutrient concentration in lettuce and broccoli grown under greenhouse conditions. The biofertilizer (BM-MegaFlu®) comprised Bacillus megaterium, Pseudomonas fluorescens, and Pantoea agglomerans bacteria. The experiment consisted of six treatments comprising (1) biofertilizer (BF), (2) chemical fertilizer + biofertilizer (CF + BF), (3) chemical fertilizer (CF), (4) CF (1/2 dose) + BF, (5) CF (1/3 dose) + BF, and (6) organic fertilizer (OF + BF). BF did not adversely affect the head height and root collar diameter of lettuce; on the contrary, it showed non-significant differences with CF + BF, BF, CF (1/2) + BF, and CF (1/3) + BF treatments and CF alone. The highest total and marketable yields were obtained from CF + BF, CF, CF (1/2) + BF treatments in lettuce. The total yield was the highest in the CF + BF, CF, CF (1/2) + BF, and CF (1/3) + BF treatments in broccoli. In conclusion, the biofertilizer had a supportive effect on the use of chemical fertilizers in lettuce and broccoli production, especially the CF (1/2) + BF treatment in lettuce. The CF (1/2) + BF and CF (1/3) + BF treatments in broccoli showed similar yields to CF. In both crops, BF could provide 50% chemical fertilizer savings.
Open AccessBiofertilizers Improve the Plant Growth, Yield, and Mineral Concentration of Lettuce and Broccoli
Biofertilizers and organic fertilizers are eco-friendly treatments that reduce the consumption and problems associated with chemical fertilizers. The aim of this research was to investigate the effects of biofertilizers and organic fertilizers on reducing consumption and improving the effectiveness of chemical fertilizer treatments by comparing the growth parameters, yield, quality criteria, and nutrient concentration in lettuce and broccoli grown under greenhouse conditions. The biofertilizer (BM-MegaFlu®) comprised Bacillus megaterium, Pseudomonas fluorescens, and Pantoea agglomerans bacteria. The experiment consisted of six treatments comprising (1) biofertilizer (BF), (2) chemical fertilizer + biofertilizer (CF + BF), (3) chemical fertilizer (CF), (4) CF (1/2 dose) + BF, (5) CF (1/3 dose) + BF, and (6) organic fertilizer (OF + BF). BF did not adversely affect the head height and root collar diameter of lettuce; on the contrary, it showed non-significant differences with CF + BF, BF, CF (1/2) + BF, and CF (1/3) + BF treatments and CF alone. The highest total and marketable yields were obtained from CF + BF, CF, CF (1/2) + BF treatments in lettuce. The total yield was the highest in the CF + BF, CF, CF (1/2) + BF, and CF (1/3) + BF treatments in broccoli. In conclusion, the biofertilizer had a supportive effect on the use of chemical fertilizers in lettuce and broccoli production, especially the CF (1/2) + BF treatment in lettuce. The CF (1/2) + BF and CF (1/3) + BF treatments in broccoli showed similar yields to CF. In both crops, BF could provide 50% chemical fertilizer savings.
- Open Access
- 14 October 2021
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF AGRICULTURE AND FORESTRY
- Vol. 45 (5) , 669-679
Acceleration of growth in tomato seedlings grown with growth retardant
- 14 October 2021
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF AGRICULTURE AND FORESTRY
- Vol. 45 (5) , 669-679
Open AccessAcceleration of growth in tomato seedlings grown with growth retardant
- 24 June 2021
- Published by Ordu University in Akademik Ziraat Dergisi
- Vol. 10 (1) , 29-36
Bazı yerel sarımsak genotiplerinin farklı diş iriliğinde taze sarımsak performanslarının belirlenmesi
Amaç: Sarımsak çevresel şartlara uyum yeteneği yüksek bir sebze olması nedeniyle geniş bir ekolojide yetiştirilmektedir. Taze yaprakları ve kurumuş dişleri tüketilmektedir. Bu çalışmada Taşköprü ilçesinden seçilen dört genotipin farklı diş iriliklerinde taze sarımsak performanslarının belirlenmesi amaçlanmıştır.Materyal ve Yöntem: Çalışmada genotiplerin dişleri ağırlıklarına göre küçük, orta ve büyük olmak üzere üç gruba ayrılmıştır. Sarımsak dişleri 3:1 oranında torf/perlit karışımı ile doldurulmuş 50*16*14 cm ebatlarındaki balkon tipi saksılara dikilmişlerdir. Dikim 1 Kasım tarihinde yapılmış, bakım ve kültürel işlemler sonrası gelişen bitkiler dikim sonrası 75. günde hasat edilmiştir. Hasat edilen bitkilerde bitki verimi (g/m2), bitki boyu (cm), aks boyu (cm), yeşil aksam boyu (cm), SPAD, yaprak kuru ağırlığı (%), kök uzunluğu (cm) ve yaprak sayısı (adet/bitki) belirlenmiştir.Araştırma Bulguları: Genotipler ve diş büyüklüğü verim ve kalite özellikleri üzerine etkili bulunmuştur. Bitki verimi değerleri 881.33-2370.33 g/m2 arasında değişmiştir. Verim özelliklerinde Yazıköy genotipi, SPAD değeri bakımından Yazıköy ve Ömerce genotipleri öne çıkmıştır. Diş büyüklükleri bitki verimde %103’e varan oranlarda etkili bulunmuştur.Sonuç: Verim açısından Yazıköy genotipi tercih edilebilir. Duyusal analizlerin yapıldığı, bitki sıklığı ve gübrelemenin test edildiği çalışmaların yapılması önemlidir.
- 24 June 2021
- Published by Ordu University in Akademik Ziraat Dergisi
- Vol. 10 (1) , 29-36
Bazı yerel sarımsak genotiplerinin farklı diş iriliğinde taze sarımsak performanslarının belirlenmesi
Amaç: Sarımsak çevresel şartlara uyum yeteneği yüksek bir sebze olması nedeniyle geniş bir ekolojide yetiştirilmektedir. Taze yaprakları ve kurumuş dişleri tüketilmektedir. Bu çalışmada Taşköprü ilçesinden seçilen dört genotipin farklı diş iriliklerinde taze sarımsak performanslarının belirlenmesi amaçlanmıştır.Materyal ve Yöntem: Çalışmada genotiplerin dişleri ağırlıklarına göre küçük, orta ve büyük olmak üzere üç gruba ayrılmıştır. Sarımsak dişleri 3:1 oranında torf/perlit karışımı ile doldurulmuş 50*16*14 cm ebatlarındaki balkon tipi saksılara dikilmişlerdir. Dikim 1 Kasım tarihinde yapılmış, bakım ve kültürel işlemler sonrası gelişen bitkiler dikim sonrası 75. günde hasat edilmiştir. Hasat edilen bitkilerde bitki verimi (g/m2), bitki boyu (cm), aks boyu (cm), yeşil aksam boyu (cm), SPAD, yaprak kuru ağırlığı (%), kök uzunluğu (cm) ve yaprak sayısı (adet/bitki) belirlenmiştir.Araştırma Bulguları: Genotipler ve diş büyüklüğü verim ve kalite özellikleri üzerine etkili bulunmuştur. Bitki verimi değerleri 881.33-2370.33 g/m2 arasında değişmiştir. Verim özelliklerinde Yazıköy genotipi, SPAD değeri bakımından Yazıköy ve Ömerce genotipleri öne çıkmıştır. Diş büyüklükleri bitki verimde %103’e varan oranlarda etkili bulunmuştur.Sonuç: Verim açısından Yazıköy genotipi tercih edilebilir. Duyusal analizlerin yapıldığı, bitki sıklığı ve gübrelemenin test edildiği çalışmaların yapılması önemlidir.