CHChenyang Huang

Chenyang Huang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chenyang Huang has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Traffic prediction via spatial-temporal graph learning network based on multi-domain temporal gated self-attention and attentive spectral graph attention network

    by Kai Chen, Chenyang Huang

    Recently, traffic prediction, which serves as a fundamental component of intelligent transportation systems, has become essential for traffic planning and management. Nevertheless, existing traffic prediction methods still face challenges in capturing critical information from traffic data, such as spatial-temporal dependencies, dynamics, periodicity, heterogeneity, etc. Therefore, a novel spatial-temporal graph learning network (ST-GLN) based on multi-domain temporal gated self-attention and attentive spectral graph attention network is proposed in this paper. It can efficiently capturing crucial information mentioned above from traffic data. Specifically, an effective data embedding module is first constructed to project raw traffic data into high-dimensional representations, in which essential positional and periodic information is encoded. Second, we design spatial-temporal encoders (STE) to extract critical information from traffic data, namely, spatial-temporal dependencies, dynamics, and heterogeneity. Within each STE, we employ a temporal encoder consisting of time-domain gated self-attention and residual frequency-domain gated self-attention to capture temporal dependencies, dynamics, and heterogeneity. Meanwhile, a spatial encoder composed of self-scaled dynamic diffusion spectral graph neural network and multi-view graph self-attention is proposed to learn spatial dependencies, dynamics, and heterogeneity. Thirdly, we adopt a multi-layer perceptron as the output embedding module to strengthen its capability of learning deep representations and generating final prediction results. Finally, we conduct extensive experiments on several representative traffic datasets to demonstrate that our method achieves superior performance against existing state-of-the-art approaches. For example, we boost the MAE, RMSE and MAPE by up to 16.83, 21.95 and 14.15% when we use ST-GLN to predict PEMS08. And the MAE, RMSE and MAPE are enhanced by up to 17.17, 23.34 and 13.11% when we use ST-GLN to predict PEMS04.

  • ALD Al2O3-Engineered Schottky Barrier Interface for Amorphous Indium–Zinc Oxide

    by Zhiwei Zheng, Chenyang Huang, Yufeng Jin, Meng Zhang, Yan Yan, Daohua Zhang, Man Hoi Wong, Hoi Sing Kwok, Lei Lu

    The interaction between metal and oxide semiconductors (OSs) is critical for advancing OS applications in large-area, flexible, and heterogeneously integrated electronics. Both ohmic and Schottky contacts are essential in these devices. The abundant intrinsic defects in OSs promote ohmic contact formation but adversely affect the Schottky barrier interface, especially in OSs with diverse sub-bandgap states, such as amorphous indium–zinc oxide (a-IZO). This study introduces an ultrathin alumina (Al2O3) interlayer, deposited via plasma-enhanced atomic layer deposition (PEALD), to effectively reduce interface defects and metal-induced gap states (MIGSs) between a-IZO and the platinum (Pt) anode. The top-anode a-IZO Schottky barrier diode (SBD) demonstrates a Schottky barrier height ( $\Phi _{\text {B}}$ ) of 0.73 eV and an ideality factor (n) of 1.35. Such ultrathin Al2O3 engineering effectively enhances the feasibility of high-quality OS Schottky contact.


  • Local fluorination-enhanced oxide semiconductor Schottky barrier diodes

    by Wenlong Chen, Chenyang Huang, Fayang Liu, Zhiwei Zheng, Meng Zhang, Yan Yan, Kuan-Chang Chang, Shengdong Zhang, Lei Lu

    Fluorine doping has been comprehensively investigated as an effective strategy for enhancing the performance of oxide semiconductor Schottky barrier diodes (SBDs). In particular, the fluorination process applied to indium–zinc–oxide (IZO) has proven effective in passivating interface defects, resulting in an increased Schottky barrier height (ФB) and a significant reduction in reverse current. However, unregulated fluorine diffusion lowers the carrier concentration in the IZO bulk, leading to a lower forward current. A fluorine-doped indium–gallium–zinc–oxide interlayer is introduced to mitigate interface defects while confining fluorination to preserve on-state performance, achieving a remarkable current rectification ratio of 2.29 × 1010. The fabricated IGZO:F/IZO SBD exhibits an increased forward current and a slightly reduced Schottky barrier after temperature-bias stress, which is attributed to stress-induced oxygen vacancies (V O) and the partial breakage of F-metal bonds. Moreover, the leakage current showed no significant changes, indicating that the fluorine-passivated interface remains nearly stable under stress.

  • Study on the Off-State Breakdown Mechanism and Performance of Copolymer Lateral Drift Region-Organic Field-Effect Transistor Using TCAD Tool

    by Jun Zhang, Xin Wu, Haonan Lin, Lei Wang, Hao Zhang, Fubin Wang, Man Li, Chenyang Huang, Jing Chen, Maolin Zhang, et al.

    The outstanding OFF-state breakdown performance of lateral drift region organic field-effect transistors (LDR-OFETs) has uncovered the capability of copolymer organic semiconductors (OSCs) in sustaining high voltage. Yet, the breakdown mechanism and performance of LDR-OFET remain unexplored due to the missing mature theories and analytical models. In this article, through the combination of commercial technology computer-aided design (TCAD) tools and fabricated copolymer OSC-based lateral power devices, the avalanche-like breakdown mechanism and impact ionization process are theoretically verified in copolymer OSCs. The fabricated OFET and LDR-OFET feature a poly(methyl methacrylate) (PMMA) and a diketopyrrolopyrrole-based conjugated copolymer (DPPT-TT) thin film as the gate insulator layer and semiconductor layer, respectively. According to the simulations, the equivalent p-n junction and p-i-n junction are formed as the reverse-biased voltage is applied on conventional OFET and LDR-OFET, respectively. The OFF-state breakdown performance of OFET is therefore determined by the parallel structure of p-n/p-i-n junction and Schottky junction. Both the Schottky contacts and the equivalent p-n/p-i-n junction contribute to the avalanche-like breakdown, yet for the LDR-OFET, the equivalent p-i-n junction takes most part of the applied voltage, guaranteeing it possesses an improved OFF-state breakdown performance. The good agreement between the simulated and measured results verifies the correctness of the proposed simulation methodology, providing an effective simulation approach for further analysis of copolymer OSC-based lateral power devices.

  • A normally off high-voltage InGaZnO transistor with drain offset region modulated by an InZnO layer

    by Chenyang Huang, Jun Zhang, Jiafei Yao, Man Li, Kemeng Yang, Maolin Zhang, Yufeng Guo

    This work presents a normally off high-voltage indium-gallium-zinc-oxide (IGZO) thin-film transistor (TFT) featuring a drain offset region modulated by the IZO layer (IMO, IMO-IGZO TFT). In addition to decreasing the specific on-resistance (Ron,sp) by more than three orders of magnitude, the IMO structure further elevates the breakdown voltage by optimizing the thickness of the IZO layer (tIZO) compared to the Offset TFT. Through TCAD simulation, the underlying mechanism responsible for the improved performance of the IMO-IGZO TFT is elucidated. The introduced IZO modulating layer effectively increases carrier concentration and rebuilds the electric field within the offset region. Consequently, the IMO-IGZO TFT with a 6 nm thick IZO modulating layer and 3.5 μm length offset region attains a breakdown voltage of 410 V and demonstrates favorable Ron,sp of 5.3 × 103 mΩ × cm2. This results in a Baliga's figure of merit of 31.72 kW/cm2, surpassing conventional and Offset TFTs by factors of 186 and 3048, respectively.


  • High Baliga’s Figure of Merit Amorphous InGaZnO Power Transistor With Ultra-Thin Indium Zinc Oxide Buried Layer

    by Chenyang Huang, Xiaoming Huang, Jiafei Yao, Jun Zhang, Man Li, Jianhua Liu, Maolin Zhang, Xianda Zhou, Yufeng Guo

    In this work, we fabricated high-voltage (HV) amorphous InGaZnO (a-IGZO) thin film transistors (TFTs) consisting of an ultra-thin buried layer of amorphous InZnO (a-IZO) and a drain offset region. With a drain offset length ( L offset ) of 2 μm, a breakdown voltage ( V BD ) of 457 V is achieved. The output current is four times higher than the conventional device, thanks to the a-IZO buried layer. TCAD simulation is performed to reveal the operating mechanism of the fabricated device. A sub-channel is formed at the a-IZO/a-IGZO interface to improve the current capability of the HV device, achieving an excellent specific on-resistance ( R on, sp ) of 6.25×10 3 mΩ∙cm 2 and a Baliga’s Figure of Merit (BFOM) of 33.4 KW/cm 2 .


  • Open Access

    The Drift Region Width Modulation Technique for Breakdown Performance Enhancement of AlGaN/GaN HEMT

    by Jianhua Liu, Jun Zhang, Jiafei Yao, Man Li, Jing Chen, Maolin Zhang, Xiaoming Huang, Chenyang Huang, Weihua Tang, Yufeng Guo

    The breakdown performance of the AlGaN/GaN high electron mobility transistor (HEMT) is limited by the high electric field peaks in the device. To obtain a more uniform electric field distribution, the drift region width modulation (DWM) technique is proposed to reshape the charge distribution between the gate and drain electrodes. By applying the Gaussian box method, an effective designing guidance for the structure optimization of the AlGaN/GaN HEMT with adaptive-width drift region pillars (AWD-HEMT) is obtained. The fabricated AWD-HEMT demonstrated a significant improvement in breakdown performance. The Baliga’s figure of merit (BFOM) of AWD-HEMT improved 65.3% compared with the conventional HEMT, without introducing complicated processes. In addition, the mechanism of the AWD-HEMT is explored by numerical methods. The simulations indicate that a more uniform electric field distribution at AlGaN/GaN interfaces could be obtained, and the increased varying rate of the adaptive-width drift region (AWD) pillars results in a more obvious electric field modulation effect.


  • Field Plate-Adaptive Doping: A Novel Surface Electric Field Optimization Technique for SOI LDMOS With Gate Field Plate

    by Chenyang Huang, Yufeng Guo, Jun Zhang, Jiafei Yao, Maolin Zhang, Ling Du, Jianhua Liu, Weihua Tang

    The tradeoff between breakdown voltage (BV) and specific ON-resistance ( ${R}_{{\mathrm{\scriptscriptstyle ON},\text {sp}}}$ ) has always been the most crucial designing indicator to power devices. In this article, based on the effective concentration profile (ECP) concept, a novel field plate-adaptive doping (FAD) technique is proposed. Therefore, the benefits of the field plate (FP) structure and variation in lateral doping (VLD) technique are obtained simultaneously, while avoiding the inherent disadvantages of VLD and FP techniques. The new devices feature the gate FPs covering the part drift region with the FAD doping profile. The analytical model is therefore proposed to theoretically explore the breakdown mechanism. The good agreement between modeled and simulated results verifies the effectiveness of the FAD technique. The FAD achieves the advantages of low on-resistance and high BV by allowing a higher drift region doping concentration and suppressing the peak field at the FP side. Thus, compared with the FP and VLD, a better tradeoff between BV and ${R}_{{\mathrm{\scriptscriptstyle ON},\text {sp}}}$ can be obtained in the FAD lateral double-diffused metal–oxide–semiconductor (LDMOS).


  • 3-D analytical model of the high-voltage interconnection effect for SOI LDMOS

    by Ling Du, Yu-Feng Guo, Jun Zhang, Jia-Fei Yao, Jian-Hua Liu, Chen-Yang Huang, Man Li