PCPaolo Chioetto

Paolo Chioetto

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Paolo Chioetto has a total of 519 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Development of a cryogenic test facility for Ariel’s primary mirror

    by Fabio D'ANca, Alfonso Collura, Vincenzo Davide Cardinale, Elisa Guerriero, Claudio Saitta, Alberto Gulizzi, Andrea Meduri, Paolo Picchi, Alejandro Fernández Soler, Andrea Tozzi, et al.

    The INAF Astronomical Observatory of Palermo has adapted one of the large vacuum chambers of the X-ray Astronomy Calibration and Testing (XACT) facility for cryogenic interferometric testing of the 1-m-class primary mirror developed for ESA’s Ariel mission. Ariel’s all-aluminum telescope will operate in flight at approximately 55 K. Under the nearly isothermal conditions expected in flight, uniform thermal contraction is expected primarily to change the mirror radius of curvature. In contrast, departures from uniform thermal contraction, for example due to temperature gradients or mechanical boundary conditions, may introduce surface figure deformations under ground-test conditions. The cryogenic campaign was therefore designed to characterize the mirror surface evolution during cooldown and to provide experimental data for the validation and correlation of the thermomechanical and Structural-Thermal-Optical Performance models. The upgraded facility consists of a 2-m-diameter, 3-m-long vacuum chamber with a 1.4-m-diameter access hatch for mirror integration. It is equipped with a closed-loop helium cryocooler, a dedicated radiative and conductive cooling system, a 4D Technology interferometer operating through a fused-silica vacuum window, and an isostatic fork support designed to minimize parasitic mechanical stresses and ensure reproducible boundary conditions. Pre-test thermal modeling predicted that the system could cool the mirror to about 100 K, as expected for the ground test, maintaining temperature gradients of less than 5 K. The paper describes the facility and experimental configuration, the thermal commissioning phase, and the interferometric campaign, which comprised two cryogenic cooldown cycles. The commissioning phase provided an initial assessment of the facility’s thermal performance, whereas the two interferometric cycles demonstrated the measurement chain’s capability to operate under cryogenic test conditions. The resulting thermal and optical dataset provides the experimental basis for model correlation. It supports the future validation of the Structural-Thermal-Optical Performance models of the Ariel primary mirror in preparation for Telescope Assembly verification activities.


  • Open Access

    Galactic and solar energetic particle observations during the increasing part of solar cycle 25 with EPD/HET and Metis on board Solar Orbiter

    by C. Grimani, M. Fabi, A. Persici, F. Sabbatini, M. Villani, A. Burtovoi, F. Frassati, M. Pancrazzi, D. Telloni, P. Kühl, et al.

    Context. Galactic cosmic rays (GCRs) and solar energetic particles (SEPs) with energies greater than tens of megaelectron volts are at the origin of spacecraft deep charging. The High Energy Telescope of the Energetic Particle Detector instrument measures the particle flux incident on the Solar Orbiter spacecraft. An algorithm implemented in the processing electronics of the visible light (VL) instrument of the Metis coronagraph generates cosmic-ray matrices containing the pixels fired by high-energy particles. These independent observations allow us to monitor the secondary particle production into the spacecraft. Aims. We studied the GCR flux long-term variations during the ascending phase of solar cycle 25 and the evolution of two SEP events observed on July 24–26, 2023, and on February 9–14, 2024, above 80 MeV with the aim of evaluating the impact of galactic and solar high-energy particles on Metis. Methods. A Python tool named REBECCA has been developed for the automated analysis of the Metis cosmic-ray matrices. The number of observed particle tracks is compared to Monte Carlo simulations of the Metis VL bidimensional CMOS sensor used as a particle detector. Results. We present the modulation of the GCR energy spectrum from 2020 through 2024 above 100 MeV. The dynamics of two intense SEP events is also reported. Monte Carlo simulations indicate that the composition of particles in the cosmic-ray matrices is dominated by protons. Going from solar minimum to maximum, an increase in particles produced by cosmic rays in the spacecraft material surrounding Metis was observed. Conversely, during the whole evolution of SEP events, protons made up more than 90% of the particles. These observations were gathered near the ecliptic during a positive polarity epoch of the global solar magnetic field. Analogous studies will be conducted during the negative polarity epoch, within 1 au, both above and below the ecliptic plane, throughout the remaining duration of the mission.


  • Analysis and characterization of midspatial frequency surface errors on the mirrors of the ARIEL space telescope

    by Paolo Chioetto, José A. Araiza-Durán, Umberto Barozzi, Andrea Bocchieri, Anna Brucalassi, Matteo Burresi, Andrew Caldwell, Martin Caldwell, Fabio D’aNca, Marco Di Giampietro, et al.

    The Atmospheric Remote-Sensing Infrared Exoplanet Large Survey (Ariel) is ESA’s M4 mission of the “Cosmic Vision” program, with the purpose of surveying the atmospheres of a large sample of known exoplanets through transit spectroscopy. Launch is scheduled for 2029. Ariel is based on a 1 m class telescope optimized for spectroscopy in the waveband between 1.95 and 7.8 μm, operating at cryogenic temperatures in the range 40–50 K. The Ariel Telescope is an off-axis, unobscured Cassegrain design, consisting of four mirrors and feeding a collimated optical beam to a set of spectrometers and photometers. The mirrors and all telescope supporting structures are realized in the aerospace-grade aluminum alloy T6061 to facilitate thermalization. Specific characteristics of the material, however, pose unique challenges to mirrors manufacturing. The softness and specific microscopic features of the aluminum alloy make it difficult to achieve an optimum balance between surface shape and low microroughness, while minimizing at the same time the presence of “waviness”, that is surface shape errors in the middle range of spatial frequencies. This work describes the initial analyses and simulations performed during the first phases of development of the processes employed for the grinding and polishing of the mirror prototypes, with particular regard to the characterization of the mid-spatial frequency errors and a study of the effects of such errors on telescope performance.

  • The manufacturing development of the 1.1 meter aluminium mirror for the Ariel mission

    by Dervis Vernani, Luigina Arcangeli, Federico Fiorenzoli, Federico Folino, Gabriele Grisoni, Ruben Mazzoleni, Nadia Missaglia, Daniele Ridolfi, Massimiliano Rossi, Pasquale Bonfa, et al.

    Ariel (Atmospheric Remote-Sensing Infrared Exoplanet Large Survey) is the fourth medium-sized mission (M4) of ESA “Cosmic Vision” program. Ariel optical payload consists of an off-axis, unobscured Cassegrain telescope feeding a set of photometers and spectrometers in the waveband between 0.5 and 7.8 μm, operating at cryogenic temperatures (50K). The Ariel telescope consists of a primary parabolic mirror (M1), followed by a hyperbolic secondary (M2), a parabolic re-collimating tertiary (M3) and a flat folding mirror (M4). Media Lario is the industrial enabler in charge of the manufacturing development of the M1 mirror; made of aluminium 6061-T651, the M1 is an off-axis parabola with a big elliptical aperture having about 1.1 m major axis and 0.75 m minor axis. Among the manufacturing processes, diamond turning is the baseline process to produce the off-axis shape, followed by deterministic polishing in Media Lario and finally coated with protected silver coating by CILAS (France). Two development models have been manufactured at LT Ultra Precision (LTU, Germany) with a new diamond turning machine able to work mirrors up to 1.2 m diameter. The deterministic polishing was performed in the Media Lario laboratories with Zeeko Intelligent Robot Polisher IRP-1200, which offers a deterministic figuring and polishing process, allowing to work on aspheric, off-axis, or freeform optical designs, including the parabolic design of Ariel M1. Guided by interferometric metrology data, a figuring and polishing routine is created to control all the physical and geometrical parameters and the polishing bonnet dwell time across the surface. The results of the development models of the M1 mirror are presented and discussed in this paper.

  • Development of processes and tests for the creation of the primary mirror and the flexure hinges for the Ariel space telescope

    by Elisa Guerriero, Fabio D’aNca, Antonio Scippa, Andrea Tozzi, Paolo Picchi, Andrea Bocchieri, Enzo Pascale, Paolo Chioetto, Daniele Gottini, Riccardo Lilli, et al.

    The ESA’s Ariel space mission, scheduled for launch in 2029, aims to study the atmospheres of ~ 1000 exoplanets in the wavelengths between Visible and Infrared. Ariel’s telescope, to the Cassegrain off-axis type, will employ an elliptical primary mirror with a parabolic surface measuring 1.2x0.7m, entirely made of Aluminum T6061 alloy. Notably, this marks the first instance of manufacturing a primary mirror of such dimensions in aluminum for Infrared applications, and this required a comprehensive study of production processes. Additionally, aluminum flexure hinges have been designed and tested to ensure an optimal connection between the primary mirror and the optical bench, minimize optical surface deformation due to its low density, maximize heat exchange, and maintain a high degree of structural robustness. This work describes all the development processes and tests to realize the primary mirror and flexure hinges. These activities will provide a solid foundation for future space missions.

  • Open Access

    Test and correlation of mounting effect on the surface form error of the ARIEL primary mirror

    by S. Nordera, U. Barozzi, F. Miceli, M. Burresi, M. Di Giampietro, L. Tommasi, P. Chioetto, P. Zuppella, F. D’aNca, F. Fiorenzoli, et al.

    ARIEL (Atmospheric Remote-sensing Infrared Exoplanet Large-survey) is a M-class ESA mission that aims to observe and study exoplanets atmosphere by means of a large survey telescope. The payload consists of an off-axis Cassegrain telescope with mirrors and structure entirely made of aluminum, in order to reduce thermal stresses and deformations during the operative phase at 50 K. Minimizing surface deformations on the primary mirror (around 1100x730mm) is crucial to reach the required optical performances, hence a combination of tests and computational analyses are foreseen to guarantee an instrument compliant with the requirements. The mounting of the M1 mirror on the rear supports is one of the main contributors to Surface Form Error (SFE); these supports consist of three flexure hinges each tightened on two pads on the back side of the mirror. A test campaign at Media Lario S.r.l. premises has been carried out by INAF and UNIFI, to gather test data on the tightening effect of one breadboard hinge on M1 Structural Model (SM). During the test the SFE of the mirror has been measured, using an interferometric setup. Leonardo company personnel participated to the test setup definition, post-processed the obtained results and developed a dedicated FEM model simulating the tightening effect. Finally, post-processed test data have been compared to FEM results, with the aim of correlating the simulations and guaranteeing the ability to predict mounting effects on the flight model. Results show SFE maps very similar between test and finite element simulation, while RMS values are met retaining an acceptable degree of conservativeness by the simulations.

  • Open Access

    In-flight radiometric calibration of the Metis UV H I Ly-α channel and comparison with UVCS data

    by Y. De Leo, A. Burtovoi, L. Teriaca, M. Romoli, V. Andretta, M. Uslenghi, S. Giordano, P. Chioetto, R. Susino, F. Landini, et al.

    Context. We present the results of the in-flight radiometric calibration performed for the ultraviolet (UV) H I Ly-α channel of the Metis coronagraph on board Solar Orbiter. Aims. The radiometric calibration is a fundamental procedure required to produce data in physical units. The quantity that allows us to pass from raw data into calibrated data is the radiometric calibration factor, ϵUV. Methods. To obtain the ϵUV results, we used observations of stellar targets transiting the Metis field of view. We derived ϵUV by determining the signal of each calibration star by means of the aperture photometry and evaluating its expected flux in the Metis narrow bandpass (121.6 ± 10 nm). The analyzed data cover a time range from the beginning of the Cruise Phase in June 2020, up until August 2021. Results. We find that the UV channel requires a significant additional correction of the response across the field of view, compared to that provided by the vignetting function measured on the ground and refined in flight, specifically tailored to the UV channel. This correction is provided by the ratio of images of the back-illumination of the closed door. Here, we use the stellar measurements to refine and improve such a correction map. After correcting for the spatial disuniformity, a radiometric calibration factor ϵ̅UV = 0.20 ± 0.03 DN/photon was found. No significant changes in the UV channel throughput were observed during the period from June 2020 to August 2021. In addition, the analysis of a smaller number of stars observed in 2022 and 2023 enabled us to extend the validity of the radiometric calibration to that period, after considering a suitable scaling factor due to the change of operating voltages occurred in April 2022. From this second analysis, the value of the radiometric calibration factor is ϵ̅UV = 0.11 ± 0.03 DN/photon. In order to support the radiometric calibration results, we performed a comparison between average radial profiles of the H I Ly-α intensity obtained from Metis UV images acquired in 2020–2021 and those measured with the Ultra-Violet Coronagraph Spectrometer (UVCS) on board the Solar and Heliospheric Observatory (SOHO) during the period of the activity minimum of solar cycle 22 in 1996. We found that intensity profiles of these instruments are consistent with each other.


  • Open Access

    Metis Observation of the Onset of Fully Developed Turbulence in the Solar Corona

    by Daniele Telloni, Luca Sorriso-Valvo, Gary P. Zank, Marco Velli, Vincenzo Andretta, Denise Perrone, Raffaele Marino, Francesco Carbone, Antonio Vecchio, Laxman Adhikari, et al.

    This Letter reports the first observation of the onset of fully developed turbulence in the solar corona. Long time series of white-light coronal images, acquired by Metis aboard Solar Orbiter at 2 minutes cadence and spanning about 10 hr, were studied to gain insight into the statistical properties of fluctuations in the density of the coronal plasma in the time domain. From pixel-by-pixel spectral frequency analysis in the whole Metis field of view, the scaling exponents of plasma fluctuations were derived. The results show that, over timescales ranging from 1 to 10 hr and corresponding to the photospheric mesogranulation-driven dynamics, the density spectra become shallower moving away from the Sun, resembling a Kolmogorov-like spectrum at 3 R ⊙. According to the latest observation and interpretive work, the observed 5/3 scaling law for density fluctuations is indicative of the onset of fully developed turbulence in the corona. Metis observation-based evidence for a Kolmogorov turbulent form of the fluctuating density spectrum casts light on the evolution of 2D turbulence in the early stages of its upward transport from the low corona.


  • Open Access

    Observation of solar energetic particles with Metis on board Solar Orbiter on February 25, 2023

    by C. Grimani, M. Fabi, A. Persici, F. Sabbatini, M. Villani, F. Frassati, E. Antonucci, M. Pancrazzi, D. Telloni, P. Kühl, et al.

    Context.The Solar Orbiter Metis coronagraph captures images of the solar corona in both visible (VL) and ultraviolet (UV) light. Tracks ascribable to the passage of galactic and solar particles appear in the Metis images. An algorithm implemented in the Metis processing electronics allows us to separate the pixels fired by VL photons from those crossed by high-energy particles. These spurious pixels are stored in cosmic-ray matrices that can be visually analyzed for particle monitoring deep into the spacecraft’s interior. This algorithm has been enabled for the VL instrument only, since the process of separating the particle tracks from pixels fired by photons in the UV images was shown to be quite challenging with respect to a quantitative analysis.Aims.This work is aimed at studying galactic cosmic rays (GCRs) and solar energetic particles (SEPs) with the Metis cosmic-ray matrices in February 2023.Methods.We compared a visual analysis of Metis cosmic-ray matrices gathered on February 22, 2023, with GCRs only, and on February 25, 2023 with both GCRs and SEPs, to Monte Carlo simulations of the VL instrument during the same days.Results.We estimated the solar modulation parameter associated with the GCR proton energy spectrum in February 2023. We show that Metis plays the role of monitoring galactic and solar protons. The Metis particle observations are used for the diagnostics of the VL instrument performance and to study the spacecraft inner charging from solar minimum towards the next solar maximum. These achievements have been attained with the benefit of the joint observations of Metis, the Energetic Particle Detector/High Energy Telescope, and near-Earth and Earth-based instruments.


  • Simulations for In-Flight Stellar Calibration Aimed at Monitoring Space Instruments’ Optical Performance

    by Chiara Casini, Paolo Chioetto, Antonela Comisso, Fabio Frassetto, Paola Zuppella, Vania Da Deppo