João Santos
João Santos has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Paulo Monteiro
Instituto de Telecomunicações, University of Aveiro
6 shared publications - António Teixeira
IEETA, DETI, LASI, University of Aveiro, Aveiro, Portugal
5 shared publications - João Pedro
Instituto de Telecomunicaes, Instituto Superior Tcnico, Lisbon, Portugal
5 shared publications - Francisco Rodrigues
PICAdvanced, PCI-Creative, Science Park, Edificio Central, 3830-352 Ilhavo, Portugal
3 shared publications Joao Pires
Instituto de Telecomunicaéões, Instituto Superior Técnico, Av. Rovisco Pais, 1, 1049-001, Lisboa, Portugal
3 shared publications- Adebayo Emmanuel Abejide
Instituto de Telecomunicações, Universidade de Aveiro, 3810-193 Aveiro, Portugal
2 shared publications
Latest Publications
- Open Access
- 11 September 2024
- Published by IntechOpen
Impact of Process Variations on the Performance of Wavelength-Dependent Devices
One of the main factors for the rapid growth and industrialization of the integrated photonics field was the previous development by the microelectronics sector of lithography tools and processes for complementary metal oxide semiconductor fabrication, now also employed in the fabrication of photonic integrated circuits. However, the scarce range of methods to fine-tune photonic devices during the lithographic process results in a disparity between designed and manufactured devices. For the current state of lithographic resolution, when considering wavelength-dependent devices, such as Bragg gratings, this disparity can significantly alter the design of the component and impact its performance, as the response strongly depends on its geometry. Thus, understanding the impact of lithography in a photonic component is extremely important to minimize these variations and optimize the design process. This chapter explores the impact of manufacturing process variations, studying their effect on device geometry through a case study on contra-directional couplers, toward ultimately reducing the existing gap between designers and foundries.
- 11 September 2024
- Published by IntechOpen
Open AccessImpact of Process Variations on the Performance of Wavelength-Dependent Devices
One of the main factors for the rapid growth and industrialization of the integrated photonics field was the previous development by the microelectronics sector of lithography tools and processes for complementary metal oxide semiconductor fabrication, now also employed in the fabrication of photonic integrated circuits. However, the scarce range of methods to fine-tune photonic devices during the lithographic process results in a disparity between designed and manufactured devices. For the current state of lithographic resolution, when considering wavelength-dependent devices, such as Bragg gratings, this disparity can significantly alter the design of the component and impact its performance, as the response strongly depends on its geometry. Thus, understanding the impact of lithography in a photonic component is extremely important to minimize these variations and optimize the design process. This chapter explores the impact of manufacturing process variations, studying their effect on device geometry through a case study on contra-directional couplers, toward ultimately reducing the existing gap between designers and foundries.
- Open Access
Prediction through Simulation-Based Corrective Models of Contra-Directional Couplers’ Experimental Results
Lithography variation presents one of the biggest challenges for photonic component optimization, especially for fabless designers. Lithography prediction models are a crucial tool for minimizing the necessary number of fabrication iterations for a device’s optimization. This paper presents one of these models specifically adapted for the contra-directional coupler structure. Through the experimental characterization of devices with a specific range of design parameters, it was possible to observe how the lithography process impacts their performance. A correction model based on effective refractive index variation and its impact on the Bragg condition of the structure was developed to predict the performance variation of a device based on the expected design variation induced by fabrication. The contra-directional couplers fabricated at CORNERSTONE foundry show a tendency to be redshifted as the gap decreases, due to an increase in waveguide width as a result of a diffraction-limited lithography process. Based on these and other findings, it was possible to correlate the design parameters to the posterior fabricated structure and ultimately predict the expected experimental response.
Open AccessPrediction through Simulation-Based Corrective Models of Contra-Directional Couplers’ Experimental Results
Lithography variation presents one of the biggest challenges for photonic component optimization, especially for fabless designers. Lithography prediction models are a crucial tool for minimizing the necessary number of fabrication iterations for a device’s optimization. This paper presents one of these models specifically adapted for the contra-directional coupler structure. Through the experimental characterization of devices with a specific range of design parameters, it was possible to observe how the lithography process impacts their performance. A correction model based on effective refractive index variation and its impact on the Bragg condition of the structure was developed to predict the performance variation of a device based on the expected design variation induced by fabrication. The contra-directional couplers fabricated at CORNERSTONE foundry show a tendency to be redshifted as the gap decreases, due to an increase in waveguide width as a result of a diffraction-limited lithography process. Based on these and other findings, it was possible to correlate the design parameters to the posterior fabricated structure and ultimately predict the expected experimental response.
- Open Access
Fabrication Tolerances’ Impact on an ODAC-Based PAM-4 Transmitter
Photonic integrated circuits (PIC) devices are impacted by fabrication tolerances and therefore, prior knowledge of such variations could improve the PIC fabrication process and overall yield. This paper presents a method for predicting the fabrication impacts on a telecommunication optical digital to analog converter (oDAC)-based pulse amplitude modulator level four (PAM-4) transmitter as a case study where the certainty of this passive device is subjected to random variation. Our findings allow us to estimate the production yield in a fabrication scenario using the symbol error rate (SER) benchmark and this contributes to the study of the viability of oDAC PAM-4 transmitters to replace conventional electrical digital to analog converter (eDAC) PAM-4 transmitters.
Open AccessFabrication Tolerances’ Impact on an ODAC-Based PAM-4 Transmitter
Photonic integrated circuits (PIC) devices are impacted by fabrication tolerances and therefore, prior knowledge of such variations could improve the PIC fabrication process and overall yield. This paper presents a method for predicting the fabrication impacts on a telecommunication optical digital to analog converter (oDAC)-based pulse amplitude modulator level four (PAM-4) transmitter as a case study where the certainty of this passive device is subjected to random variation. Our findings allow us to estimate the production yield in a fabrication scenario using the symbol error rate (SER) benchmark and this contributes to the study of the viability of oDAC PAM-4 transmitters to replace conventional electrical digital to analog converter (eDAC) PAM-4 transmitters.
- Open Access
- 13 May 2024
- Published by MDPI AG in Preprints.org
Fabrication Tolerances Impact on an ODAC Based PAM-4 Transmitter
Photonic integrated circuits (PIC) devices are impacted by fabrication tolerances and therefore, prior knowledge of such variation could improve the PIC fabrication process and overall yield. This paper presents a method for predicting the fabrication impacts on a telecommunication optical digital to analog converter (oDAC) based pulse amplitude modulator level four (PAM-4) transmitter. Our findings allow us to estimate the production yield in fabrication scenario using symbol error rate (SER) benchmark.
- 13 May 2024
- Published by MDPI AG in Preprints.org
Open AccessFabrication Tolerances Impact on an ODAC Based PAM-4 Transmitter
Photonic integrated circuits (PIC) devices are impacted by fabrication tolerances and therefore, prior knowledge of such variation could improve the PIC fabrication process and overall yield. This paper presents a method for predicting the fabrication impacts on a telecommunication optical digital to analog converter (oDAC) based pulse amplitude modulator level four (PAM-4) transmitter. Our findings allow us to estimate the production yield in fabrication scenario using symbol error rate (SER) benchmark.
- 2 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
PIC-Based Transceiver for Access Networks: Package and Functionalities Verification towards a Commercial Solution
InP monolithic PIC design packaged towards a standard form factor transceiver level is presented, showcasing the packaging options taken and presenting the overall transceiver performance against key specifications for access networks demonstrating the commercial feasibility of PIC based transceivers for these applications.
- 2 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
PIC-Based Transceiver for Access Networks: Package and Functionalities Verification towards a Commercial Solution
InP monolithic PIC design packaged towards a standard form factor transceiver level is presented, showcasing the packaging options taken and presenting the overall transceiver performance against key specifications for access networks demonstrating the commercial feasibility of PIC based transceivers for these applications.
- Open Access
Photonic Integrated Circuits for Passive Optical Networks: Outlook and Case Study of Integrated Quasi-Coherent Receiver
Photonic Integrated Circuits (PICs) are taking a major role in the telecommunications and datacenter markets. The increased complexity of coexisting and fast evolving standards for Passive Optical Networks (PONs) suggests the introduction of PICs will be the next step in PON related optoelectronics. The PICs ecosystem has greatly matured in the past years, becoming a solution that can cope with the requirements of industry and academia, and presenting the flexibility of combining multiple platforms available towards viable commercial solutions. In this review, the evolution of PONs and PICs is presented, with a focus on the optoelectronic integration of PICs for PONs and coherent PONs. To demonstrate the potential of PICs and their combination with electronics, a quasi-coherent receiver based on co-hosted PIC and Application Specific Integrated Circuit (ASIC) is presented and characterized.
Open AccessPhotonic Integrated Circuits for Passive Optical Networks: Outlook and Case Study of Integrated Quasi-Coherent Receiver
Photonic Integrated Circuits (PICs) are taking a major role in the telecommunications and datacenter markets. The increased complexity of coexisting and fast evolving standards for Passive Optical Networks (PONs) suggests the introduction of PICs will be the next step in PON related optoelectronics. The PICs ecosystem has greatly matured in the past years, becoming a solution that can cope with the requirements of industry and academia, and presenting the flexibility of combining multiple platforms available towards viable commercial solutions. In this review, the evolution of PONs and PICs is presented, with a focus on the optoelectronic integration of PICs for PONs and coherent PONs. To demonstrate the potential of PICs and their combination with electronics, a quasi-coherent receiver based on co-hosted PIC and Application Specific Integrated Circuit (ASIC) is presented and characterized.
- 20 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 646-648
Hybrid PIC+ASIC quasi-coherent receiver for TWDM-PON
A hybrid integration of a PIC and an ASIC for achieving quasi-coherent receiver designed for tunable 10 Gbit/s applications is presented. This assembly holds the key functionalities for enabling integrated, highly efficient, tunable transceivers which can also enable TWDM-PON.
- 20 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 646-648
Hybrid PIC+ASIC quasi-coherent receiver for TWDM-PON
A hybrid integration of a PIC and an ASIC for achieving quasi-coherent receiver designed for tunable 10 Gbit/s applications is presented. This assembly holds the key functionalities for enabling integrated, highly efficient, tunable transceivers which can also enable TWDM-PON.
- 14 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 33 (23) , 1341-1344
Artificial Neural Network Symbol Estimator With Enhanced Robustness to Nonlinear Phase Noise
This letter reports a novel approach for nonlinear phase noise mitigation, based on artificial neural networks (ANNs) tailored to classification applications and a pre-processing stage of feature engineering. Starting with a set of proof-of-concept simulations, we verify that the proposed system can achieve optimal performance for the additive white Gaussian noise (AWGN) channel. Then, considering a dispersion-less channel with strong nonlinear phase noise (NLPN) distortion, we demonstrate a Q-factor increase of 0.4dB, comparing with standard carrier-phase estimation (CPE) followed by minimum distance detection. Finally, simulating the propagation of 64Gbaud PM-16QAM over standard single mode fiber (SSMF), we verify that the ANN-based solution is effective on wavelength-division multiplexing (WDM) transmission conditions, enabling to increase the maximum signal reach by approximately 1 fiber span over the legacy CPE-enabled NLPN compensation.
- 14 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 33 (23) , 1341-1344
Artificial Neural Network Symbol Estimator With Enhanced Robustness to Nonlinear Phase Noise
This letter reports a novel approach for nonlinear phase noise mitigation, based on artificial neural networks (ANNs) tailored to classification applications and a pre-processing stage of feature engineering. Starting with a set of proof-of-concept simulations, we verify that the proposed system can achieve optimal performance for the additive white Gaussian noise (AWGN) channel. Then, considering a dispersion-less channel with strong nonlinear phase noise (NLPN) distortion, we demonstrate a Q-factor increase of 0.4dB, comparing with standard carrier-phase estimation (CPE) followed by minimum distance detection. Finally, simulating the propagation of 64Gbaud PM-16QAM over standard single mode fiber (SSMF), we verify that the ANN-based solution is effective on wavelength-division multiplexing (WDM) transmission conditions, enabling to increase the maximum signal reach by approximately 1 fiber span over the legacy CPE-enabled NLPN compensation.
- 1 June 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23255552,p. 204-209
Optical transport network design with collocated regeneration and differential delay compensation
A potentially cost-effective approach for augmenting the transmission capacity in an optical transport network (OTN) consists of bundling several optical channels by means of an inverse-multiplexing strategy, e.g. virtual concatenation (VCAT). When VCAT is employed together with multipath routing, the differential delay between concatenated channels needs to be compensated via electrical buffering. To avoid installing large and costly high-speed buffers, this compensation can be dispersed throughout the intermediate path nodes. With this distributed scheme, each intermediate compensation operation requires an optical-electrical-optical (OEO) converter. Such converters, which are typically employed to allow electrical processing (e.g. signal regeneration, traffic switching/grooming, etc.), represent the largest contributor to the capital expenditures of an optical network. Hence, to save on OEO equipment and keep the network cost-effectiveness, we propose the novel approach of collocating the differential delay buffering and the regeneration on the same network element, enabling the implementation of distributed schemes with minimal link capacity levels, OEO count, and buffer size requirements. To effectively design an OTN network under these conditions, we also present a new multi-step optimization framework based on integer linear programming (ILP) modeling. To test our approach, emerging 100 Gb/s Ethernet services are established over two reference networks using virtually-concatenated 40 Gb/s channels. The correspondent results confirm that relevant OEO/regenerator count savings (ranging from 23% to 44%) can be attained with the collocated approach while the buffer sizes are maintained reasonably small. We also show that the end-to-end transmission latency is not affected by the adoption of this collocated strategy
- 1 June 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23255552,p. 204-209
Optical transport network design with collocated regeneration and differential delay compensation
A potentially cost-effective approach for augmenting the transmission capacity in an optical transport network (OTN) consists of bundling several optical channels by means of an inverse-multiplexing strategy, e.g. virtual concatenation (VCAT). When VCAT is employed together with multipath routing, the differential delay between concatenated channels needs to be compensated via electrical buffering. To avoid installing large and costly high-speed buffers, this compensation can be dispersed throughout the intermediate path nodes. With this distributed scheme, each intermediate compensation operation requires an optical-electrical-optical (OEO) converter. Such converters, which are typically employed to allow electrical processing (e.g. signal regeneration, traffic switching/grooming, etc.), represent the largest contributor to the capital expenditures of an optical network. Hence, to save on OEO equipment and keep the network cost-effectiveness, we propose the novel approach of collocating the differential delay buffering and the regeneration on the same network element, enabling the implementation of distributed schemes with minimal link capacity levels, OEO count, and buffer size requirements. To effectively design an OTN network under these conditions, we also present a new multi-step optimization framework based on integer linear programming (ILP) modeling. To test our approach, emerging 100 Gb/s Ethernet services are established over two reference networks using virtually-concatenated 40 Gb/s channels. The correspondent results confirm that relevant OEO/regenerator count savings (ranging from 23% to 44%) can be attained with the collocated approach while the buffer sizes are maintained reasonably small. We also show that the end-to-end transmission latency is not affected by the adoption of this collocated strategy
- 1 May 2012
- Published by Academy Publisher in Journal of Networks
- Vol. 7 (5) , 783-790
Optimization Framework for Supporting 40 Gb/s and 100 Gb/s Services over Heterogeneous Optical Transport Networks
Optimization Framework for Supporting 40 Gb/s and 100 Gb/s Services over Heterogeneous Optical Transport Networks
- 1 May 2012
- Published by Academy Publisher in Journal of Networks
- Vol. 7 (5) , 783-790
Optimization Framework for Supporting 40 Gb/s and 100 Gb/s Services over Heterogeneous Optical Transport Networks
Optimization Framework for Supporting 40 Gb/s and 100 Gb/s Services over Heterogeneous Optical Transport Networks