ADAlla Borisovna Dyagileva

Alla Borisovna Dyagileva

*This is an algorithmically generated author record based on publicly available information.

Alla Borisovna Dyagileva has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Оценка качества сточных вод различного происхождения для целевого использования в системе рекультивации почв

    by А. Б. Дягилева, Д. И. Мазурик, А. И. Смирнова, А. П. Слуцкая

    В работе представлены результаты комплексного исследования модельных сточных вод, образующихся при переработке биомассы древесины на различных технологических стадиях. Показана принципиальная возможность их использования для подготовки новых целевых продуктов в системе рекультивации почв. На основе открытых данных в научной литературе проанализированы агрохимические показатели состава органических отходов (кора, опилки, лигнин, осадки сточных вод) для получения удобрений, поскольку в процессах компостирования традиционно используются растительные компоненты переработки древесного сырья. В этой технологии также формируется почвенная вода со специфическими свойствами, что послужило основанием для исследования специфических сточных вод, образующихся при переработке древесины, для процессов рекультивации почвы и создания искусственных почвенных слоев. По совокупности интегральных показателей установлено, что в концентрированном виде и при незначительном разбавлении эти специфические потоки могут оцениваться как токсичные, однако при специальной подготовке они могут являться биологически активным субстратом для зеленых водорослей. Биотестирование показало, что сток древесно-подготовительного цеха и сток производства ХТММ в концентрированном виде токсичны для Daphnia magna Straus, но не оказывают острого токсического действия на Paramecium caudatum и Chlorella vulgaris Beijer. При обоснованном и необходимом разбавлении специально подготовленными растворами модельные композиции могут проявлять ростостимулирующую активность по отношению к посадочному материалу, рекомендованному для рекультивации полигонов. Полученные результаты позволяют рассматривать исследованные сточные воды после соответствующей подготовки в качестве перспективного вторичного сырья для обогащения деградированных почв органическими веществами, что соответствует принципам циркулярной экономики и устойчивого развития лесопромышленного комплекса. Практическая значимость работы заключается в обосновании возможности использования жидких побочных продуктов деревопереработки для создания композиций гидропосева при рекультивации нарушенных земель. The paper presents the results of a comprehensive study of model wastewater generated during the processing of wood biomass at various technological stages. The fundamental possibility of their use for the preparation of new target products in the soil reclamation system is demonstrated. Based on open data from the scientific literature, the agrochemical indicators of the composition of organic waste (bark, sawdust, lignin, sewage sludge) for fertilizer production are analyzed, since plant components from wood processing are traditionally used in composting processes. This technology also generates soil water with specific properties, which served as a basis for the study of specific wastewater generated during wood processing for soil reclamation and the creation of artificial soil layers. Based on a set of integral indicators, it was found that in concentrated form and with slight dilution, these specific streams can be assessed as toxic; however, with special preparation, they can serve as a biologically active substrate for green algae. Biotesting showed that the effluent from the wood preparation shop and the effluent from HTTM production in concentrated form are toxic to Daphnia magna Straus, but do not have an acute toxic effect on Paramecium caudatum and Chlorella vulgaris Beijer. With reasonable and necessary dilution with specially prepared solutions, the model compositions can exhibit growth-stimulating activity in relation to planting material recommended for landfill reclamation. The obtained results allow us to consider the studied wastewater, after appropriate preparation, as a promising secondary raw material for enriching degraded soils with organic matter, which is consistent with the principles of a circular economy and sustainable development of the forest industry. The practical significance of the work lies in substantiating the possibility of using liquid by-products of wood processing to create hydroseeding compositions for the reclamation of disturbed lands.

  • Лесопромышленный комплекс и процесс техногенеза

    by Saint-Petersburg State University of Industrial Technologies and Design, Alla B. Dyagileva, Anastasiya I. Smirnova, Pavel I. Lenivtsev

    An analysis of the environmental protection activities of timber industry enterprises based on data from open sources and on the experience of expert assessment of the negative impact of a number of industrial facilities processing wood biomass has made it possible to describe the mechanisms of influence of an integrated type of economic activity on the modern technologies. The groups of technogenesis characteristic of natural landscape and geochemical processes in the zone of influence of timber industry enterprises have been identified, those being biogenesis, hydrogenesis, humatogenesis, chelation and anthropogenocenosis. During the industrial exploitation of forests, the core of the forest biogeocenosis and the specific complex of plants of the lower tier, which determines biogenic migration, change. The features of the manifestation of hydrogenesis associated with a change in the action of water and its penetration into the lithosphere have been considered. The manifestations of humatogenesis and chelation have been analyzed from the perspective of changes in the carbon content in forest litter. It has been established that the sources of anthropogenocenosis are objects of technical infrastructure and economic activity that are associated with the turnover and processing of wood raw materials, which contributes to a change in the nature of migration, accumulation of chemicals in various environments and the formation of biogeochemical barriers in their path. There is a special type of “economic urbanization” at the present stage of social development, in which the timber industry participates as a processor of plant raw materials and a supplier of finished products with waste generation in urban agglomerations with their possible subsequent processing. Several possible mechanisms of technogenesis at various stages of the development of economic activity in the forestry sector have been identified. The significant role of the degradation mechanism has been emphasized. The modern nature management orientation and development of modifying mechanisms of technogenesis, such as supportive, creative and managing (the most promising for the implementation of a circular economy) and their combination in the process of exploitation of the territory open up new opportunities. Forecasts have been provided on the prospects of the transition from the traditionally perceived technogenesis (mainly degradation) to nootechnogenesis. This transition is based on the implementation of the principles of a managed natural-technical system, taking into account the dynamics of restoration and regulation of reproduction of forest resources under environmental restrictions, which is the key to a sustainable timber industry.


  • Open Access

    Evaluation of growthstimulating activity of substances contained in bark-containing wastewater from woodworking industry

    by Alla B. Dyagileva, Sofya B. Mikhailova, Anastasia I. Smirnova, Михайлова Софья Борисовна

    The possibility of using an aqueous extract of bark-containing mass of wastewater formed during wood processing as growth stimulator for various crops was considered. The proposed technological solution meets the modern requirements to improve the environmental efficiency of enterprises in woodworking industry, contributes to the expansion of the range of goods which can be used in related industries, including the agroindustrial complex to increase its productivity. Studies on testing extractive substances of bark-containing mass at various dilutions as a growth stimulant for a number of test crops (spring common wheat cv. Rada and garden cress cv. Azhur) were carried out. The cambium layer of wood contains all the necessary substances required for higher plants and is most susceptible to destruction under the influence of water and mechanical forces during wood processing at the stage of bark separation. In this regard, the possibility of using aqueous extracts from the bark of various wood species as growth stimulants was investigated. The purpose of the research was to study the effect of a complex of bark extractives on biometric parameters of the test crops depending on the dilution factor of the concentrated bark-containing wastewater from wood processing. It was established that specially prepared aqueous extracts from the bark have pronounced growth-s timulating effects (significant increase in root length by 3540 % and sprouts - by more than 4244 %) and can be used as growth stimulants in seed preparation. The method of producing growth stimulants based on bark-containing wastewater is protected by a patent.


  • Comparative study of the thermal stability of wood treated with lignin-based sol-gel compositions

    by А.б. Дягилева, А.и. Смирнова

    Использование композиций на основе технических лигнинов и кремниевых минеральных композиций на основе НФК для получения огнезащитных материалов для обработки деревянных конструкций является перспективным направлением в развитии «зеленых» технологий. Основной механизм действия композиций на основе лигнина заключается в процессе коксообразования на поверхности древесины за счет реакций твердофазного ингибирования целлюлозной матрицы. Минеральная составляющая этих композиций имеет тенденцию к стеклованию при высыхании, что изменяет специфику защитного действия новых материалов в процессе высокотемпературной деструкции древесины и целлюлозы, входящей в ее состав. Таким образом, целью работы является исследование термостабильности древесины, обработанной композициями, полученными в результате модификации лигнина с минеральными веществами путем реализации способа золь-гель технологии. В работе определена принципиальная возможность расширении спектра областей применения гибридных продуктов нового поколения, обладающих специфической организацией пространственной структуры в технологии подготовки пожароустойчивой древесины. Огнезащита проявляется за счет установления химической связи с матрицей древесины, которая тесно взаимодействует с лигнином, координационно связанным с алюмокремниевой составляющей композиции. Все исследованные композиции обеспечивают I группу огнезащитной эффективности с потерей массы менее 9% при испытании. По результатам термического анализа всех исследованных образцов установлено, что обработанные золь-гель композицией образцы древесины ведут себя примерно идентично в диапазоне температур от 100 до 300 С. При дальнейшем увеличении температуры отмечается меньшее снижение остаточной массы в сравнении с необработанной древесиной, где происходит более активное разложением гемицеллюлоз и целлюлозы, входящих в состав древесины, что свидетельствует об огнезащитных свойствах новых композиций. The use of compositions based on technical lignins and silicon mineral compositions based on NFC for the production of flame-retardant materials for the processing of wooden structures is a promising direction in the development of "green" technologies. The main mechanism of action of lignin-based compositions is the process of coke formation on the surface of wood due to solid-phase inhibition reactions of the cellulose matrix. The mineral component of these compositions tends to glassy during drying, which changes the specifics of the protective effect of new materials in the process of high-temperature destruction of wood and cellulose, which is part of it. Thus, the aim of the work is to study the thermal stability of wood treated with compositions obtained as a result of modification of lignin with minerals by implementing the sol-gel technology method. The paper defines the fundamental possibility of expanding the range of applications of hybrid products of a new generation with a specific organization of spatial structure in the technology of preparation of fire-resistant wood. Fire protection is provided by establishing a chemical bond with the wood matrix, which closely interacts with lignin, which is coordinatively bound to the aluminum-silicon component of the composition. All the compositions studied provide group I fire-retardant efficiency with a mass loss of less than 9% during testing. According to the results of thermal analysis of all the samples studied, it was found that the sol-gel-treated wood samples behave approximately identically in the temperature range from 100 to 300 C. With a further increase in temperature, there is a smaller decrease in the residual mass in comparison with untreated wood, where there is a more active decomposition of hemicelluloses and cellulose, which are part of the wood, which indicates the fire-retardant properties of the new compositions.


  • Open Access

    INFLUENCE OF LIGNIN CONCENTRATION ON VISCOELASTIC PROPERTIES OF ITS MODIFIED FORM OB-TAINED BY SOL-GEL METHOD IN THE PRESENCE OF ALUMINUM-SILICON COMPOUNDS

    by Anastasiya Igorevna Smirnova, Alla Borisovna Dyagileva, Aleksandra Yevgen'Yevna Prismakova, Ol'Ga Yur'Yevna Derkacheva

    Рассмотрены концепция и модель течения структурированной дисперсной системы, полученной на основе сульфатного лигнина, модифицированного золь-гель способом в присутствии алюмосодержащих компонентов в виде нефелинового концентрата. Полученные системы преимущественно относятся к системам неньютоновского поведения, которые характеризуются явлениями разрушения и образования новых структур в процессе сдвигового течения, причем характер течения зависит от особенностей взаимодействия компонентов системы. Данные особенности определяются как их концентрацией, так и условиями процесса синтеза, при котором происходит изменение сил сцепления между частицами, и в данный момент не могут быть обобщены и описаны существующими известными уравнениями течения. В результате исследования было установлено, что увеличение концентрации сульфатного лигнина при различных условиях синтеза, но при постоянном количестве минеральной составлявшей, приводит к формированию нового модифицированного продукта, при этом наблюдается тенденция увеличения параметров кинематической вязкости и напряжения сдвига при соответствующих значениях рН синтеза. В условиях избыточных концентраций лигнина более 400 мг/дм3 при самоорганизации в матрице новой формы доминирование лигнина приводит к снижению прочностных характеристик полимера для всех его форм, полученных при различных значениях рН. Установлено, что кинематическая вязкость и напряжение сдвига водных дисперсий данной системы зависит как от значения рН их синтеза, так и от концентрации исходного лигнина, который определяет механизмы самоорганизации новой модифицированной структуры.