Natalia Koch
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Natalia Koch has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Adam P. Niewiadomski
Department of Geoengineering and Raw Materials Extraction, Faculty of Mining, Safety Engineering and Industrial Automation, Silesian University of Technology, 44-100 Gliwice, Poland
5 shared publications - Paweł Wrona
Department of Safety Engineering, Faculty of Mining, Safety Engineering and Industrial Automation, Silesian University of Technology, 44-100 Gliwice, Poland
3 shared publications - Grzegorz Pach
Department of Geoengineering and Raw Materials Extraction, Faculty of Mining, Safety Engineering and Industrial Automation, Silesian University of Technology, 44-100 Gliwice, Poland
2 shared publications - Zenon Różański
Department of Geoengineering and Raw Materials Extraction, Faculty of Mining, Safety Engineering and Industrial Automation, Silesian University of Technology, 44-100 Gliwice, Poland
2 shared publications - Andrzej Drwięga
Mineral and Energy Economy Research Institute, Polish Academy of Sciences, Wybickiego 7A, 31-261 Kraków, Poland
1 shared publication - Artur Dyczko
Mineral and Energy Economy Research Institute, Polish Academy of Sciences, 7A Wybickiego St., 31-261 Cracow, Poland
1 shared publication
Latest Publications
- Open Access
- 9 October 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (20) , 10282
Model-Based Assessment of Heat Wave Impacts on Occupational Heat Stress and the Economic Sustainability of Mitigation Measures
Increasing exposure of workers to heat-wave conditions and occupational heat stress highlights the need for methods that integrate the assessment of thermal working conditions with the selection of sustainable and economically justified protective measures. This article proposes an integrated technical–economic framework for assessing heat stress during outdoor work, based on the Wet Bulb Globe Temperature (WBGT) index and dry-bulb temperature td. The framework also enables the determination of cost-effectiveness domains for selected protective solutions. Three environmental scenarios and four variants of meteorological conditions were analysed, representing different combinations of solar exposure, humidity, and air movement. The calculations assumed an 8-h work shift, including 4 h during which conditions exceeded the adopted criterion, a 10-person work team, and a labour cost of EUR 30/(worker · h). The preventive measures analysed included organisational measures, shading, local mechanical cooling, combinations of technical solutions, and a separated cooled work zone; PCM cooling vests were considered solely as a supplementary measure. For each variant, avoided losses, implementation costs, economic balance, the equivalent number of avoided work stoppages, and the minimum number of avoided work stoppages required to achieve cost-effectiveness were determined. The cost-effectiveness threshold ranged from one avoided work stoppage for shading, through three avoided work stoppages for mechanical cooling and the technical package, to eight avoided work stoppages for a separated cooled zone. The proposed approach constitutes a modifiable framework for selecting measures to mitigate the effects of heat stress under different climatic, organisational, and cost conditions.
- 9 October 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (20) , 10282
Open AccessModel-Based Assessment of Heat Wave Impacts on Occupational Heat Stress and the Economic Sustainability of Mitigation Measures
Increasing exposure of workers to heat-wave conditions and occupational heat stress highlights the need for methods that integrate the assessment of thermal working conditions with the selection of sustainable and economically justified protective measures. This article proposes an integrated technical–economic framework for assessing heat stress during outdoor work, based on the Wet Bulb Globe Temperature (WBGT) index and dry-bulb temperature td. The framework also enables the determination of cost-effectiveness domains for selected protective solutions. Three environmental scenarios and four variants of meteorological conditions were analysed, representing different combinations of solar exposure, humidity, and air movement. The calculations assumed an 8-h work shift, including 4 h during which conditions exceeded the adopted criterion, a 10-person work team, and a labour cost of EUR 30/(worker · h). The preventive measures analysed included organisational measures, shading, local mechanical cooling, combinations of technical solutions, and a separated cooled work zone; PCM cooling vests were considered solely as a supplementary measure. For each variant, avoided losses, implementation costs, economic balance, the equivalent number of avoided work stoppages, and the minimum number of avoided work stoppages required to achieve cost-effectiveness were determined. The cost-effectiveness threshold ranged from one avoided work stoppage for shading, through three avoided work stoppages for mechanical cooling and the technical package, to eight avoided work stoppages for a separated cooled zone. The proposed approach constitutes a modifiable framework for selecting measures to mitigate the effects of heat stress under different climatic, organisational, and cost conditions.
- Open Access
Energy-Efficient Installation for Ventilation Air Methane (VAM) Reduction in Mines
This paper presents a conceptual design for a technological installation aimed at mitigating ventilation air methane (VAM) from coal mine exhaust shafts, offering combined heat and power generation. It addresses the challenge posed by low methane concentrations (below 0.7%), which preclude direct combustion. To overcome this, the proposed concept involves diverting a portion of the VAM to a combustion chamber of the power boiler dedicated to co-combustion with flotation concentrate suspension, which is properly prepared for feeding into the combustion chamber. The heat generated in the power boiler produces steam to drive a turbine generator for electricity production. Back-pressure steam from the turbine can be utilized for district heating or as a thermal energy source for various industrial processes, optimizing the plant’s energy efficiency and reducing its environmental footprint. The feasibility of this technology hinges on its cost-effectiveness and energy efficiency. This aspect of efficiency has been outlined. An energy balance analysis, based on real emission data from a selected mine, is provided to determine power boiler efficiency, fuel consumption, and a VAM reduction rate. The forecast of the amount of energy produced was presented for a single installation with a grate boiler capable of co-firing fuels with a VAM flow participation of 25 m3/s. Such installations can be scaled to meet mine requirements, enabling the neutralization of VAM at a total capacity of up to 300 m3/s, which corresponds to emissions from a large ventilation shaft.
Open AccessEnergy-Efficient Installation for Ventilation Air Methane (VAM) Reduction in Mines
This paper presents a conceptual design for a technological installation aimed at mitigating ventilation air methane (VAM) from coal mine exhaust shafts, offering combined heat and power generation. It addresses the challenge posed by low methane concentrations (below 0.7%), which preclude direct combustion. To overcome this, the proposed concept involves diverting a portion of the VAM to a combustion chamber of the power boiler dedicated to co-combustion with flotation concentrate suspension, which is properly prepared for feeding into the combustion chamber. The heat generated in the power boiler produces steam to drive a turbine generator for electricity production. Back-pressure steam from the turbine can be utilized for district heating or as a thermal energy source for various industrial processes, optimizing the plant’s energy efficiency and reducing its environmental footprint. The feasibility of this technology hinges on its cost-effectiveness and energy efficiency. This aspect of efficiency has been outlined. An energy balance analysis, based on real emission data from a selected mine, is provided to determine power boiler efficiency, fuel consumption, and a VAM reduction rate. The forecast of the amount of energy produced was presented for a single installation with a grate boiler capable of co-firing fuels with a VAM flow participation of 25 m3/s. Such installations can be scaled to meet mine requirements, enabling the neutralization of VAM at a total capacity of up to 300 m3/s, which corresponds to emissions from a large ventilation shaft.
- Open Access
- 23 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 154
Analysis of the Influence of Atmospheric Pressure Variations on Methane Emission
The study investigates the influence of atmospheric pressure fluctuations on methane emissions in a decommissioned coal mine in Poland (SRK S.A., KWK “Krupiński”). Continuous measurements of methane concentrations and atmospheric pressure were analyzed to identify periods of dynamic pressure drops, which were then correlated with recorded methane levels. Strong linear relationships were observed, with correlation coefficients ranging from 0.88 to 0.97 and determination coefficients exceeding 0.85, indicating that pressure changes are a primary factor influencing methane release. Individual regression models for each identified case showed the lowest mean absolute errors compared to generalized models, highlighting the impact of atypical cases on predictive performance. Key findings align with previous studies, confirming that both the magnitude and the gradient of pressure decline directly affect the rate and scale of methane release and that threshold effects may limit further concentration increases despite continued pressure drops. The results suggest the potential to develop a predictive model linking atmospheric pressure variations to methane emissions, which could support forecasting of methane capture in decommissioned mines or ventilation methane levels in active mines. Understanding these mechanisms is crucial for both occupational safety and for effective methane emission reduction strategies in the mining sector.
- 23 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 154
Open AccessAnalysis of the Influence of Atmospheric Pressure Variations on Methane Emission
The study investigates the influence of atmospheric pressure fluctuations on methane emissions in a decommissioned coal mine in Poland (SRK S.A., KWK “Krupiński”). Continuous measurements of methane concentrations and atmospheric pressure were analyzed to identify periods of dynamic pressure drops, which were then correlated with recorded methane levels. Strong linear relationships were observed, with correlation coefficients ranging from 0.88 to 0.97 and determination coefficients exceeding 0.85, indicating that pressure changes are a primary factor influencing methane release. Individual regression models for each identified case showed the lowest mean absolute errors compared to generalized models, highlighting the impact of atypical cases on predictive performance. Key findings align with previous studies, confirming that both the magnitude and the gradient of pressure decline directly affect the rate and scale of methane release and that threshold effects may limit further concentration increases despite continued pressure drops. The results suggest the potential to develop a predictive model linking atmospheric pressure variations to methane emissions, which could support forecasting of methane capture in decommissioned mines or ventilation methane levels in active mines. Understanding these mechanisms is crucial for both occupational safety and for effective methane emission reduction strategies in the mining sector.
- Open Access
- 21 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (23) , 12352
The Impact of Air Velocity on the Formation of Methane Concentration Fields in Excavated Workings
The article addresses a significant aspect of ventilation in excavated workings with the influx of hazardous gases. The selection of appropriate ventilation affects worker safety and helps avoid localized accumulation of gases at dangerous concentrations. Polish mining regulations allow methane accumulation in roadways of up to 3%, which provides a safety margin relative to the methane explosibility limits of 5–15% CH4. The methane concentrations obtained in the study ranged from 0.3% to 1.39%. The presented studies focused on the impact of air velocity on the formation of methane concentration fields. For this purpose, a numerical model was created based on an underground measurement results obtained in the active roadway with confirmed methane influx. The analysis of methane concentration distribution in the excavation was conducted using Ansys Fluent 2024 R1 for three different air velocities in the whirl flow airduct. It was shown that within 30 m from the face, the methane–air mixture is heterogeneous. Beyond this distance, it becomes a homogeneous mixture, regardless of the air velocity supplied by the auxiliary ventilation. Additionally, the occurrence of air recirculation was observed, resulting from the typical arrangement of equipment in the excavation space. The presence of elevated methane concentrations in the zone between the whirl flow airduct and the adjacent excavation floor is a notable phenomenon.
- 21 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (23) , 12352
Open AccessThe Impact of Air Velocity on the Formation of Methane Concentration Fields in Excavated Workings
The article addresses a significant aspect of ventilation in excavated workings with the influx of hazardous gases. The selection of appropriate ventilation affects worker safety and helps avoid localized accumulation of gases at dangerous concentrations. Polish mining regulations allow methane accumulation in roadways of up to 3%, which provides a safety margin relative to the methane explosibility limits of 5–15% CH4. The methane concentrations obtained in the study ranged from 0.3% to 1.39%. The presented studies focused on the impact of air velocity on the formation of methane concentration fields. For this purpose, a numerical model was created based on an underground measurement results obtained in the active roadway with confirmed methane influx. The analysis of methane concentration distribution in the excavation was conducted using Ansys Fluent 2024 R1 for three different air velocities in the whirl flow airduct. It was shown that within 30 m from the face, the methane–air mixture is heterogeneous. Beyond this distance, it becomes a homogeneous mixture, regardless of the air velocity supplied by the auxiliary ventilation. Additionally, the occurrence of air recirculation was observed, resulting from the typical arrangement of equipment in the excavation space. The presence of elevated methane concentrations in the zone between the whirl flow airduct and the adjacent excavation floor is a notable phenomenon.
- Open Access
- 20 October 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (21) , 11599
Influence of Light Wavelengths on Visibility in Smoke during a Tunnel Fire
The occurrence of fire in road tunnels poses high risks to the life and health of people. The resulting smoke, fire gases and high temperatures can be the cause of poisoning and burns. Additionally, dense smoke can significantly reduce visibility, which can result in difficulties during evacuation. This paper aims to investigate the effect of specific wavelengths of visible light on visibility in smoke conditions and to determine the wavelength of light (colour) that can improve visibility in smoke-filled environments. A rubber mixture with polyester and polyamide spacers was selected as a combustible material in order to obtain more realistic conditions with respect to smoke parameters. These plastics are commonly used, among others, in tires, elements of engine plating, upholstery or truck trailer covers. Then, in a test fire chamber laboratory, the colour of light (wavelength) was determined, obtaining the highest transmittance value, understood as the amount of radiation transmitted through the substance. It has been shown that devices emitting a light wave of a specific length can significantly improve visibility in smoke-filled environment.
- 20 October 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (21) , 11599
Open AccessInfluence of Light Wavelengths on Visibility in Smoke during a Tunnel Fire
The occurrence of fire in road tunnels poses high risks to the life and health of people. The resulting smoke, fire gases and high temperatures can be the cause of poisoning and burns. Additionally, dense smoke can significantly reduce visibility, which can result in difficulties during evacuation. This paper aims to investigate the effect of specific wavelengths of visible light on visibility in smoke conditions and to determine the wavelength of light (colour) that can improve visibility in smoke-filled environments. A rubber mixture with polyester and polyamide spacers was selected as a combustible material in order to obtain more realistic conditions with respect to smoke parameters. These plastics are commonly used, among others, in tires, elements of engine plating, upholstery or truck trailer covers. Then, in a test fire chamber laboratory, the colour of light (wavelength) was determined, obtaining the highest transmittance value, understood as the amount of radiation transmitted through the substance. It has been shown that devices emitting a light wave of a specific length can significantly improve visibility in smoke-filled environment.