Олена Мельник
Research Subjects
Олена Мельник has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Anatolii Subin
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
3 shared publications - Oleksii Kaglyak
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського
2 shared publications Alexander Siora
Інститут електрозварювання ім. Є. О. Патона Національної академії наук України
1 shared publicationAlexey Honcharuk
КПІ ім. Ігоря Сікорського
1 shared publicationAndriy Vasylenko
1 shared publicationBogdan Romanov
КПІ ім. Ігоря Сікорського
1 shared publication
Latest Publications
- Open Access
- 2 October 2026
- Published by Publishing House Helvetica (Publications) in Управління змінами та інновації
- No. 19,p. 139-146
ЕФЕКТИВНІСТЬ УПРОВАДЖЕННЯ AGILE-МЕТОДОЛОГІЙ ЯК ІНСТРУМЕНТУ УПРАВЛІННЯ ОРГАНІЗАЦІЙНИМИ ЗМІНАМИ В ІТ-КОМПАНІЯХ УКРАЇНИ
Актуальність дослідження зумовлена поширенням Agile-методологій в ІТ-секторі та потребою комплексного оцінювання результативності їх упровадження. Використано методи аналізу, порівняння, систематизації, узагальнення, структурно-функціонального аналізу та графічного моделювання. Систематизовано критерії ефективності Agile та визначено організаційні механізми їх результативного застосування. Встановлено, що ефективність Agile залежить від узгодженості організаційної структури, управлінських процесів, цифрової інфраструктури й взаємодії команд. Виявлено проблеми формального застосування Agile-практик, недостатньої автономності команд, масштабування, технічного боргу та дефіциту компетентностей. Обґрунтовано організаційний підхід, що інтегрує організаційні, процесні, технологічні й аналітичні складові управління.
- 2 October 2026
- Published by Publishing House Helvetica (Publications) in Управління змінами та інновації
- No. 19,p. 139-146
Open AccessЕФЕКТИВНІСТЬ УПРОВАДЖЕННЯ AGILE-МЕТОДОЛОГІЙ ЯК ІНСТРУМЕНТУ УПРАВЛІННЯ ОРГАНІЗАЦІЙНИМИ ЗМІНАМИ В ІТ-КОМПАНІЯХ УКРАЇНИ
Актуальність дослідження зумовлена поширенням Agile-методологій в ІТ-секторі та потребою комплексного оцінювання результативності їх упровадження. Використано методи аналізу, порівняння, систематизації, узагальнення, структурно-функціонального аналізу та графічного моделювання. Систематизовано критерії ефективності Agile та визначено організаційні механізми їх результативного застосування. Встановлено, що ефективність Agile залежить від узгодженості організаційної структури, управлінських процесів, цифрової інфраструктури й взаємодії команд. Виявлено проблеми формального застосування Agile-практик, недостатньої автономності команд, масштабування, технічного боргу та дефіциту компетентностей. Обґрунтовано організаційний підхід, що інтегрує організаційні, процесні, технологічні й аналітичні складові управління.
- Open Access
- 21 May 2026
- Published by Publishing House Helvetica (Publications) in Таврійський науковий вісник. Серія: Технічні науки
- Vol. 1 (2) , 486-500
ДОСЛІДЖЕННЯ ТЕМПЕРАТУРИ ПРИ ТОКАРНОМУ ОБРОБЛЕННІ
На сьогоднішній день для вдосконалення технологій механічного оброблення металів виникає гостра необхідність у детальному дослідженні теплових процесів, що супроводжують операції різання. Зростання механічних і фізичних характеристик сучасних конструкційних матеріалів, а також прагнення до інтенсифікації режимів обробки роблять температуру в зоні різання ключовим фактором, який обмежує продуктивність, впливає на точність розмірів і якість поверхні. У зв’язку з цим актуальним завданням технології машинобудування є цілеспрямоване регулювання теплових явищ, оскільки нагрів інструменту та заготовки призводить до їхнього теплового розширення, що безпосередньо знижує точність обробки, особливо в умовах автоматизованого виробництва. У роботі проведено аналіз останніх досліджень, які підтверджують, що температура в зоні різання має визначальний вплив на інтенсивність зношування різального інструменту та його стійкість. Зокрема, через нерівномірне нагрівання на передній поверхні інструменту формується лунка зношування, форма якої корелює з розподілом температурних полів. Метою даної статті є дослідження температурних явищ у зоні різання сталевих заготовок та порівняння отриманих результатів із методами комп’ютерного моделювання процесів теплообміну при токарній обробці. Для досягнення мети було використано комплексний підхід, що поєднує практичні експерименти на верстатному обладнанні та програмну симуляцію. Експериментальні дослідження проводилися на токарно-гвинторізному верстаті 16К20, де як матеріал заготовки використовувалася сталь 40Х, а як інструментальний матеріал – швидкорізальна сталь Р6М5. Вимірювання температури здійснювалося безконтактним методом за допомогою інфрачервоних пірометрів марок NJTY T600, Flus Ir 829 та NJTY T900. У ході дослідження варіювалися такі параметри, як швидкість різання (від 100 до 157 м/хв), глибина різання (від 1,5 до 3 мм) та подача (від 0,23 до 0,39 мм/об). Паралельно здійснювалася імітація процесу в спеціалізованому програмному забезпеченні «Дослідження температурних явищ при точінні», що дозволило отримати еталонні теоретичні значення температури для різних режимів. Для обробки отриманих даних та побудови багатофакторних статистичних моделей було застосовано методи регресійного аналізу та планування повного факторного експерименту з використанням програмного комплексу ПРІАМ. Отримані математичні моделі підтвердили високу інформативність та адекватність згідно з критерієм Фішера. Встановлено, що найбільша частка впливу на формування температури належить швидкості різання та глибині обробки. Аналіз теплових потоків показав, що основна частина теплової енергії (60–80%) відводиться разом зі стружкою, тоді як заготовка поглинає близько 5–10%, що впливає на її деформацію. Висновки проведеного дослідження вказують на суттєву різницю в точності використаних пірометрів, що зумовлено технічними особливостями приладів, умовами вимірювання та зовнішніми чинниками, такими як рівень заряду батареї. Зіставлення даних показало, що навіть при ідентичних математичних моделях абсолютні показники температури можуть відрізнятися, що підкреслює необхідність регулярного калібрування обладнання та врахування систематичних похибок. Отримані результати можуть бути використані для...
- 21 May 2026
- Published by Publishing House Helvetica (Publications) in Таврійський науковий вісник. Серія: Технічні науки
- Vol. 1 (2) , 486-500
Open AccessДОСЛІДЖЕННЯ ТЕМПЕРАТУРИ ПРИ ТОКАРНОМУ ОБРОБЛЕННІ
На сьогоднішній день для вдосконалення технологій механічного оброблення металів виникає гостра необхідність у детальному дослідженні теплових процесів, що супроводжують операції різання. Зростання механічних і фізичних характеристик сучасних конструкційних матеріалів, а також прагнення до інтенсифікації режимів обробки роблять температуру в зоні різання ключовим фактором, який обмежує продуктивність, впливає на точність розмірів і якість поверхні. У зв’язку з цим актуальним завданням технології машинобудування є цілеспрямоване регулювання теплових явищ, оскільки нагрів інструменту та заготовки призводить до їхнього теплового розширення, що безпосередньо знижує точність обробки, особливо в умовах автоматизованого виробництва. У роботі проведено аналіз останніх досліджень, які підтверджують, що температура в зоні різання має визначальний вплив на інтенсивність зношування різального інструменту та його стійкість. Зокрема, через нерівномірне нагрівання на передній поверхні інструменту формується лунка зношування, форма якої корелює з розподілом температурних полів. Метою даної статті є дослідження температурних явищ у зоні різання сталевих заготовок та порівняння отриманих результатів із методами комп’ютерного моделювання процесів теплообміну при токарній обробці. Для досягнення мети було використано комплексний підхід, що поєднує практичні експерименти на верстатному обладнанні та програмну симуляцію. Експериментальні дослідження проводилися на токарно-гвинторізному верстаті 16К20, де як матеріал заготовки використовувалася сталь 40Х, а як інструментальний матеріал – швидкорізальна сталь Р6М5. Вимірювання температури здійснювалося безконтактним методом за допомогою інфрачервоних пірометрів марок NJTY T600, Flus Ir 829 та NJTY T900. У ході дослідження варіювалися такі параметри, як швидкість різання (від 100 до 157 м/хв), глибина різання (від 1,5 до 3 мм) та подача (від 0,23 до 0,39 мм/об). Паралельно здійснювалася імітація процесу в спеціалізованому програмному забезпеченні «Дослідження температурних явищ при точінні», що дозволило отримати еталонні теоретичні значення температури для різних режимів. Для обробки отриманих даних та побудови багатофакторних статистичних моделей було застосовано методи регресійного аналізу та планування повного факторного експерименту з використанням програмного комплексу ПРІАМ. Отримані математичні моделі підтвердили високу інформативність та адекватність згідно з критерієм Фішера. Встановлено, що найбільша частка впливу на формування температури належить швидкості різання та глибині обробки. Аналіз теплових потоків показав, що основна частина теплової енергії (60–80%) відводиться разом зі стружкою, тоді як заготовка поглинає близько 5–10%, що впливає на її деформацію. Висновки проведеного дослідження вказують на суттєву різницю в точності використаних пірометрів, що зумовлено технічними особливостями приладів, умовами вимірювання та зовнішніми чинниками, такими як рівень заряду батареї. Зіставлення даних показало, що навіть при ідентичних математичних моделях абсолютні показники температури можуть відрізнятися, що підкреслює необхідність регулярного калібрування обладнання та врахування систематичних похибок. Отримані результати можуть бути використані для...
- Open Access
- 31 December 2025
- Published by Kherson National Technical University in Вісник Херсонського національного технічного університету
- Vol. 1 (4(95)) , 246-253
РОЗРОБКА ЦИФРОВИХ ДВІЙНИКІВ ДЛЯ ПРОГНОЗУВАННЯ ТЕХНІЧНОГО ЗНОСУ ВИРОБНИЧОГО ОБЛАДНАННЯ
З метою підвищення ефективності управління виробничими процесами та прогнозування технічного зносу обладнання у роботі досліджено особливості застосування цифрових технологій у реальному секторі економіки, що охоплює як індустріальні, так і агропромислові підприємства. Визначено, що цифрові двійники виступають базовим інструментом для створення віртуальної моделі фізичних об’єктів, здатної відтворювати їхній стан у реальному часі на основі даних, отриманих із сенсорів IoT, алгоритмів машинного навчання та аналітики великих даних. Метою дослідження є обґрунтування ефективності впровадження цифрових двійників у системи управління технічним станом виробничих засобів і визначення переваг та ризиків цифрової трансформації. Для досягнення мети застосовано методи аналізу, синтезу та узагальнення. Показано, що використання технологій штучного інтелекту, IoT та Big Data сприяє підвищенню продуктивності підприємств на 20–30 %, зменшенню операційних витрат на 15–25 % і скороченню часу простоїв обладнання. У роботі систематизовано ключові фактори успішного впровадження цифрових технологій, серед яких розвиток компетентностей персоналу, стратегічне планування інтеграції систем і посилення кіберзахисту. Запропоновано концепцію поетапного впровадження цифрових двійників у структуру підприємств із метою підвищення точності діагностики, зменшення аварійності та оптимізації ремонтних процесів. Визначено основні виклики цифровізації, серед яких високі початкові витрати, дефіцит кваліфікованих кадрів і ризики кібербезпеки. З огляду на це, рекомендовано посилити підготовку персоналу, упровадити навчальні програми та вдосконалити політику інформаційного захисту. Отримані результати можуть бути використані для формування інтегрованих систем прогнозування стану технічних засобів у межах концепції «розумного виробництва» та подальшої цифрової трансформації промислових підприємств.
- 31 December 2025
- Published by Kherson National Technical University in Вісник Херсонського національного технічного університету
- Vol. 1 (4(95)) , 246-253
Open AccessРОЗРОБКА ЦИФРОВИХ ДВІЙНИКІВ ДЛЯ ПРОГНОЗУВАННЯ ТЕХНІЧНОГО ЗНОСУ ВИРОБНИЧОГО ОБЛАДНАННЯ
З метою підвищення ефективності управління виробничими процесами та прогнозування технічного зносу обладнання у роботі досліджено особливості застосування цифрових технологій у реальному секторі економіки, що охоплює як індустріальні, так і агропромислові підприємства. Визначено, що цифрові двійники виступають базовим інструментом для створення віртуальної моделі фізичних об’єктів, здатної відтворювати їхній стан у реальному часі на основі даних, отриманих із сенсорів IoT, алгоритмів машинного навчання та аналітики великих даних. Метою дослідження є обґрунтування ефективності впровадження цифрових двійників у системи управління технічним станом виробничих засобів і визначення переваг та ризиків цифрової трансформації. Для досягнення мети застосовано методи аналізу, синтезу та узагальнення. Показано, що використання технологій штучного інтелекту, IoT та Big Data сприяє підвищенню продуктивності підприємств на 20–30 %, зменшенню операційних витрат на 15–25 % і скороченню часу простоїв обладнання. У роботі систематизовано ключові фактори успішного впровадження цифрових технологій, серед яких розвиток компетентностей персоналу, стратегічне планування інтеграції систем і посилення кіберзахисту. Запропоновано концепцію поетапного впровадження цифрових двійників у структуру підприємств із метою підвищення точності діагностики, зменшення аварійності та оптимізації ремонтних процесів. Визначено основні виклики цифровізації, серед яких високі початкові витрати, дефіцит кваліфікованих кадрів і ризики кібербезпеки. З огляду на це, рекомендовано посилити підготовку персоналу, упровадити навчальні програми та вдосконалити політику інформаційного захисту. Отримані результати можуть бути використані для формування інтегрованих систем прогнозування стану технічних засобів у межах концепції «розумного виробництва» та подальшої цифрової трансформації промислових підприємств.
- Open Access
- 8 August 2025
- Published by Chernihiv Polytechnic National University in TECHNICAL SCIENCES AND TECHNOLOGIES
- No. 2 (40),p. 164-170
Algorithm for calculating conditions for axial cutting tools
In modern mechanical engineering production, machining by cutting remains a key technological process due to its versatility and ability to process a wide range of materials. In the context of rapid advancements in information technologies, particularly the adoption of computer numerical control (CNC) machines and artificial intelligence systems, the optimization of cutting conditions has gained significant importance. This contributes to increased productivity, reduced financial and time costs, and ensures high processing quality. A crucial aspect is the integration of these technologies within the framework of CALS (Continuous Acquisition and Life-cycle Support), which involves creating a unified information model of a product across all stages of its life cycle—from design to disposal. CALS technologies enable data standardization, facilitating efficient infor-mation integration and data continuity in the processes of design, production, logistics, repair, and after-sales service.Research aimed at improving methods for predicting and optimizing cutting conditions is critical for enhancing the effi-ciency of mechanical engineering production in the context of digital transformation. Particular attention is given to the ma-chining of holes using axial cutting tools, where the accuracy of selecting cutting conditions directly impacts the quality and cost-effectiveness of the process. The study presents a generalized algorithm for the operation of software developed for the automated calculation of optimal cutting conditions. This algorithm takes into account technological parameters, material and tool characteristics, as well as requirements for accuracy and productivity. The implementation of such solutions enhances the competitiveness of production, reduces costs, and supports the sustainable development of the industry.
- 8 August 2025
- Published by Chernihiv Polytechnic National University in TECHNICAL SCIENCES AND TECHNOLOGIES
- No. 2 (40),p. 164-170
Open AccessAlgorithm for calculating conditions for axial cutting tools
In modern mechanical engineering production, machining by cutting remains a key technological process due to its versatility and ability to process a wide range of materials. In the context of rapid advancements in information technologies, particularly the adoption of computer numerical control (CNC) machines and artificial intelligence systems, the optimization of cutting conditions has gained significant importance. This contributes to increased productivity, reduced financial and time costs, and ensures high processing quality. A crucial aspect is the integration of these technologies within the framework of CALS (Continuous Acquisition and Life-cycle Support), which involves creating a unified information model of a product across all stages of its life cycle—from design to disposal. CALS technologies enable data standardization, facilitating efficient infor-mation integration and data continuity in the processes of design, production, logistics, repair, and after-sales service.Research aimed at improving methods for predicting and optimizing cutting conditions is critical for enhancing the effi-ciency of mechanical engineering production in the context of digital transformation. Particular attention is given to the ma-chining of holes using axial cutting tools, where the accuracy of selecting cutting conditions directly impacts the quality and cost-effectiveness of the process. The study presents a generalized algorithm for the operation of software developed for the automated calculation of optimal cutting conditions. This algorithm takes into account technological parameters, material and tool characteristics, as well as requirements for accuracy and productivity. The implementation of such solutions enhances the competitiveness of production, reduces costs, and supports the sustainable development of the industry.
- Open Access
- 8 August 2025
- Published by Chernihiv Polytechnic National University in TECHNICAL SCIENCES AND TECHNOLOGIES
- No. 2 (40),p. 148-157
Influence of cutting modes on the cutting tool life when drilling carbon-fiber reinforced polymer
In the manufacture of products made of carbon fiber reinforced plastics (CFRP), one of the most common cutting operations is drilling holes. This process is accompanied by intensive wear of the cutting tool and specific hole defects.The paper presents results of the study of the effect of cutting modes and geometric parameters of the drill on the tool life when drilling CFRP with high-speed steel twist drills. The tool life was assessed by the number of quality holes, the criterion for replacing the tool was the value of the hole delamination coefficient (the ratio of the maximum diameter of the damaged area to the nominal diameter of the drilled hole). The quality of holes using the light-optical microscopy was assessed. Empirical mathematical models were obtained using regression analysis and experimental design methods. The robust experimental design was built based on the pseudo-random LPτ numbers. The regression model and its statistical characteristics were obtained using the PRIAM software. Statistical characteristics of the model indicate its adequacy, informativeness and stability. The analysis of the degree of individual factors’ influence on the response function was carried out based on of the percentage of participation and the correlation coefficient. It was found that the spindle speed (27.7 %), the drill sharpening angle (17.8 %), and the interaction of the spindle speed and feed have the greatest influence.The analysis of the resulting model, marginal regression equations and marginal responses allowed to formulate recommendations for choosing cutting modes. It was found that for the given conditions the greatest number of quality holes can be obtained at the spindle speed of 1050 rpm and a feed rate of 0.17 mm/rev – this statement is true for all studied drill diameters (2 mm…4 mm) and for both angle options (90°, 118°), while drills with a sharpening angle of 118° demonstrate better results. The results obtained during the study can be used to optimize technological processes for drilling CFRP and for choosing proper cutting tool, which, in turn, will contribute to increasing both productivity and processing quality.
- 8 August 2025
- Published by Chernihiv Polytechnic National University in TECHNICAL SCIENCES AND TECHNOLOGIES
- No. 2 (40),p. 148-157
Open AccessInfluence of cutting modes on the cutting tool life when drilling carbon-fiber reinforced polymer
In the manufacture of products made of carbon fiber reinforced plastics (CFRP), one of the most common cutting operations is drilling holes. This process is accompanied by intensive wear of the cutting tool and specific hole defects.The paper presents results of the study of the effect of cutting modes and geometric parameters of the drill on the tool life when drilling CFRP with high-speed steel twist drills. The tool life was assessed by the number of quality holes, the criterion for replacing the tool was the value of the hole delamination coefficient (the ratio of the maximum diameter of the damaged area to the nominal diameter of the drilled hole). The quality of holes using the light-optical microscopy was assessed. Empirical mathematical models were obtained using regression analysis and experimental design methods. The robust experimental design was built based on the pseudo-random LPτ numbers. The regression model and its statistical characteristics were obtained using the PRIAM software. Statistical characteristics of the model indicate its adequacy, informativeness and stability. The analysis of the degree of individual factors’ influence on the response function was carried out based on of the percentage of participation and the correlation coefficient. It was found that the spindle speed (27.7 %), the drill sharpening angle (17.8 %), and the interaction of the spindle speed and feed have the greatest influence.The analysis of the resulting model, marginal regression equations and marginal responses allowed to formulate recommendations for choosing cutting modes. It was found that for the given conditions the greatest number of quality holes can be obtained at the spindle speed of 1050 rpm and a feed rate of 0.17 mm/rev – this statement is true for all studied drill diameters (2 mm…4 mm) and for both angle options (90°, 118°), while drills with a sharpening angle of 118° demonstrate better results. The results obtained during the study can be used to optimize technological processes for drilling CFRP and for choosing proper cutting tool, which, in turn, will contribute to increasing both productivity and processing quality.
- Open Access
- 22 May 2025
- Published by Chernihiv Polytechnic National University in TECHNICAL SCIENCES AND TECHNOLOGIES
- No. 1 (39),p. 85-97
Laser forming of carbon steel sheets by cicled laser irradiation
Laser forming (LF) of sheet material is a progressive treatment process and have some benefits. Laser forming is a flexible process and needs no heavy metal-intensive equipment and tools. Materials with high rigidity, brittle, elastic materials can be treated by laser forming. Therefore, the investigation of LF is important task. An important point to study is repeatability of multipass laser forming of sheet materials and exploring of possibilities of stabilizing process parameters. Actually, this research is aimed at these issues. Results of heat process modeling during laser forming are shown. The modeling was carried out in specially developed software based on the three-dimensional non-stationary equation of heat conductivity. The analysis of transformations in carbon steels during forming cycles of laser irradiation is presented. The results of metallographic investigation of processed samples of steel 65G are presented, where occurrence of martensitic transformation is confirmed. Dependence of the deformation magnitude on the number of laser irradiation cycles and a comparison of the forming of samples without prior heat treatment and subjected to bulk hardening are shown. It is noted that collected heat during multi pass laser treatment causes expand heat affected zone decrease homogeneity of it and decrease maximal level of micro hardness on 100 HV. I is mentioned that previously hardened samples (by volume hardening) have higher level of bending angle compare to samples without previous heat treatment. Difference between mentioned options was more than 40% after twelve passes. It was recommended to use external cooling source to decrease level of collected heat in case of multipass laser forming process. High level of collected heat could initiate surface melting of treated samples.
- 22 May 2025
- Published by Chernihiv Polytechnic National University in TECHNICAL SCIENCES AND TECHNOLOGIES
- No. 1 (39),p. 85-97
Open AccessLaser forming of carbon steel sheets by cicled laser irradiation
Laser forming (LF) of sheet material is a progressive treatment process and have some benefits. Laser forming is a flexible process and needs no heavy metal-intensive equipment and tools. Materials with high rigidity, brittle, elastic materials can be treated by laser forming. Therefore, the investigation of LF is important task. An important point to study is repeatability of multipass laser forming of sheet materials and exploring of possibilities of stabilizing process parameters. Actually, this research is aimed at these issues. Results of heat process modeling during laser forming are shown. The modeling was carried out in specially developed software based on the three-dimensional non-stationary equation of heat conductivity. The analysis of transformations in carbon steels during forming cycles of laser irradiation is presented. The results of metallographic investigation of processed samples of steel 65G are presented, where occurrence of martensitic transformation is confirmed. Dependence of the deformation magnitude on the number of laser irradiation cycles and a comparison of the forming of samples without prior heat treatment and subjected to bulk hardening are shown. It is noted that collected heat during multi pass laser treatment causes expand heat affected zone decrease homogeneity of it and decrease maximal level of micro hardness on 100 HV. I is mentioned that previously hardened samples (by volume hardening) have higher level of bending angle compare to samples without previous heat treatment. Difference between mentioned options was more than 40% after twelve passes. It was recommended to use external cooling source to decrease level of collected heat in case of multipass laser forming process. High level of collected heat could initiate surface melting of treated samples.
- Open Access
- 1 June 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 5 (1) , 122-129
Repeatability of multipass laser forming of sheet materials
Laser forming (LF) of sheet material is a progressive treatment process and have some benefits. Laser forming is a flexible process and need no heavy metal-intensive equipment and tools. Materials with high rigidity, brittle, elastic materials can be treated by laser forming. Therefore, the investigation of LF is important task. An important point to study is repeatability of multipass laser forming of sheet materials and explore of the possibilities of stabilizing process parameters. Actually, this research is aimed at these issues. Methods and results of experimental investigation of repeatability of multipass laser forming of sheet materials on parallel and multidirectional passes are described. A methodical approach of using the VisualWeld software package for modeling the process of multi-pass laser forming has been developed. The mentioned software package was used for modeling as an alternative to a physical experiment to predict sample deformations and determine treating parameters. It has been experimentally established that the repeatability in laser forming is quite high, the difference in the amount of deformation preferably did not exceed 5%. In addition, it is shown that by varying the direction of irradiation trajectories, their step and the number of passes on each trajectory, it is possible to obtain a complex spatial configuration of the product.
- 1 June 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 5 (1) , 122-129
Open AccessRepeatability of multipass laser forming of sheet materials
Laser forming (LF) of sheet material is a progressive treatment process and have some benefits. Laser forming is a flexible process and need no heavy metal-intensive equipment and tools. Materials with high rigidity, brittle, elastic materials can be treated by laser forming. Therefore, the investigation of LF is important task. An important point to study is repeatability of multipass laser forming of sheet materials and explore of the possibilities of stabilizing process parameters. Actually, this research is aimed at these issues. Methods and results of experimental investigation of repeatability of multipass laser forming of sheet materials on parallel and multidirectional passes are described. A methodical approach of using the VisualWeld software package for modeling the process of multi-pass laser forming has been developed. The mentioned software package was used for modeling as an alternative to a physical experiment to predict sample deformations and determine treating parameters. It has been experimentally established that the repeatability in laser forming is quite high, the difference in the amount of deformation preferably did not exceed 5%. In addition, it is shown that by varying the direction of irradiation trajectories, their step and the number of passes on each trajectory, it is possible to obtain a complex spatial configuration of the product.