Diswandi Nurba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Diswandi Nurba has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Mustaqimah Mustaqimah
2 shared publicationsA Khurjannah
Department of Agricultural Engineering, Universitas Syiah Kuala, Jalan Tengku Hasan Krueng Kalee No. 3 Darussalam 23111 Banda Aceh, Indonesia
1 shared publicationAfdhalul Ahmar
Teknik Pertanian, Fakultas Pertanian, Universitas Syiah Kuala
1 shared publication- Elya Sukmawati
Universitas Syiah Kuala/USK, Faculty of Agriculture, Department of Agricultural Engineering, Banda Aceh, Indonesia
1 shared publication - Miray Yasar
University College Dublin
1 shared publication Muliyani Muliyani
Program Studi Teknik Pertanian, Fakultas Pertanian, Universitas Syiah Kuala
1 shared publication
Latest Publications
- Open Access
- 1 November 2021
- Published by LPPM Unsyiah in Jurnal Ilmiah Mahasiswa Pertanian
- Vol. 6 (4) , 586-593
Kinerja Ghe Vent Dryer Dengan Menggunakan Lilin Sebagai Penyimpan Panas
Abstrak. Green house effect (GHE) vent dryer adalah alat pengering dengan memanfaatkan energi surya sebagai sumber energi pengeringan. Namun radiasi matahari terbatas pada waktu tertentu sehingga mengganggu prases pengeringan. Penambahan lilin sebagai media penyimpan panas adalah salah satu solusi agar alat green house effect (GHE) vent dryer dapat beroperasi pada saat energi surya sudah meredup. Tujuan penelitian ini untuk menguji kinerja GHE Vent Dryer dengan menggunakan lilin sebagai media penyimpan panas. Data yang diukur dalam penelitian ini berupa suhu di dalam ruang pengering (ruang 1, ruang 2 dan ruang 3), ruang absorber, suhu lingkungan dan kecepatan udara. Pengukuran dimulai dari pukul 08.00 WIB sampai sahu didalam ruangan menyamai suhu lingkungan, proses pengukuran dilakukan setiap 60 menit. Hasil penelitian ini didapatkan bahwa rata-rata suhu absorber menggunakan lilin sebagai media penyimpan panas berkisar 31 ºC sampai 71 ºC dengan temperatur lingkungan yang di hasilkan 27 ºC sampai 35 ºC dan untuk terperatur dalam alat pengering sekitar 27 ºC sampai 58 ºC. Hasil pengukuran kecepatan udara pada penelitian ini berkisar 0,3 m/s sampai 1,5 m/s. Dapat disimpulkan bahwa penggunaan batu serpihan sebagai media penyimpan panas pada alat GHE vent Dryer mampu mempertahankan panas pada ruang pengering selama 4 sampai 5 jam saat tidak ada radiasi matahari. Performance Of Ghe Vent Dryer By Using Wax As Heat Storage Abstract. Green house effect (GHE) vent dryer is a dryer that uses solar energy as a drying energy source. However, solar radiation is limited to a certain time so that it interferes with the drying process. The addition of wax as a heat storage medium is one solution so that the green house effect (GHE) vent dryer can operate when the solar energy has dimmed. The purpose of this study was to test the performance of the GHE Vent Dryer using wax as a heat storage medium. The data measured in this study were the temperature in the drying chamber (room 1, room 2 and room 3), absorber chamber, ambient temperature and air velocity. The measurement starts from 08.00 WIB until the temperature in the room equals the ambient temperature, the measurement process is carried out every 60 minutes. The results of this study found that the average temperature of the absorber using wax as a heat storage medium ranged from 31 C to 71 C with an ambient temperature of 27 C to 35 C and for a temperature setting in the dryer it was around 27 C to 58 C. The results of air velocity measurements in this study ranged from 0.3 m/s to 1.5 m/s. It can be concluded that the use of crushed stone as
- 1 November 2021
- Published by LPPM Unsyiah in Jurnal Ilmiah Mahasiswa Pertanian
- Vol. 6 (4) , 586-593
Open AccessKinerja Ghe Vent Dryer Dengan Menggunakan Lilin Sebagai Penyimpan Panas
Abstrak. Green house effect (GHE) vent dryer adalah alat pengering dengan memanfaatkan energi surya sebagai sumber energi pengeringan. Namun radiasi matahari terbatas pada waktu tertentu sehingga mengganggu prases pengeringan. Penambahan lilin sebagai media penyimpan panas adalah salah satu solusi agar alat green house effect (GHE) vent dryer dapat beroperasi pada saat energi surya sudah meredup. Tujuan penelitian ini untuk menguji kinerja GHE Vent Dryer dengan menggunakan lilin sebagai media penyimpan panas. Data yang diukur dalam penelitian ini berupa suhu di dalam ruang pengering (ruang 1, ruang 2 dan ruang 3), ruang absorber, suhu lingkungan dan kecepatan udara. Pengukuran dimulai dari pukul 08.00 WIB sampai sahu didalam ruangan menyamai suhu lingkungan, proses pengukuran dilakukan setiap 60 menit. Hasil penelitian ini didapatkan bahwa rata-rata suhu absorber menggunakan lilin sebagai media penyimpan panas berkisar 31 ºC sampai 71 ºC dengan temperatur lingkungan yang di hasilkan 27 ºC sampai 35 ºC dan untuk terperatur dalam alat pengering sekitar 27 ºC sampai 58 ºC. Hasil pengukuran kecepatan udara pada penelitian ini berkisar 0,3 m/s sampai 1,5 m/s. Dapat disimpulkan bahwa penggunaan batu serpihan sebagai media penyimpan panas pada alat GHE vent Dryer mampu mempertahankan panas pada ruang pengering selama 4 sampai 5 jam saat tidak ada radiasi matahari. Performance Of Ghe Vent Dryer By Using Wax As Heat Storage Abstract. Green house effect (GHE) vent dryer is a dryer that uses solar energy as a drying energy source. However, solar radiation is limited to a certain time so that it interferes with the drying process. The addition of wax as a heat storage medium is one solution so that the green house effect (GHE) vent dryer can operate when the solar energy has dimmed. The purpose of this study was to test the performance of the GHE Vent Dryer using wax as a heat storage medium. The data measured in this study were the temperature in the drying chamber (room 1, room 2 and room 3), absorber chamber, ambient temperature and air velocity. The measurement starts from 08.00 WIB until the temperature in the room equals the ambient temperature, the measurement process is carried out every 60 minutes. The results of this study found that the average temperature of the absorber using wax as a heat storage medium ranged from 31 C to 71 C with an ambient temperature of 27 C to 35 C and for a temperature setting in the dryer it was around 27 C to 58 C. The results of air velocity measurements in this study ranged from 0.3 m/s to 1.5 m/s. It can be concluded that the use of crushed stone as
- Open Access
- 1 November 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 922 (1) , 012032
Performance test of air input control system for paddy grain drying using in-store dryer
The control system is e series of a system that is very important in today’s technology. Wherewith control system can make the human job easy and get a good result. This study used a controlled In-Store Dryer to dry 100 kg of grain with an initial moisture content of 17,77% to reach 14%. The study results using a control system, the average ambient temperature of the three tests ranged from 32°C to 33°C, and the RH ranged from 64,8 % to 68,6%. At the same time, the average temperature was 36,7°C to 37,5°C, and the average RH was 49,9% up to 64,7%. The drying airflow speed at the fan input is 6,2 m/s and at the chimney 9,2 m/s. Moisture content during drying differs for each thickness depending on the location, with an average drying rate of 0,92%. During drying, the moisture content varied for each consistency depending on the site, with the drying rate at an average ISD of 0.92% w / hr. total electrical energy consumption of 32.57 kWh and energy in biomass combustion 1,416,600 kJ. The quality during rice drying starts from the initial moisture content of 17.78% to reach the final moisture content of 10.44%.
- 1 November 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 922 (1) , 012032
Open AccessPerformance test of air input control system for paddy grain drying using in-store dryer
The control system is e series of a system that is very important in today’s technology. Wherewith control system can make the human job easy and get a good result. This study used a controlled In-Store Dryer to dry 100 kg of grain with an initial moisture content of 17,77% to reach 14%. The study results using a control system, the average ambient temperature of the three tests ranged from 32°C to 33°C, and the RH ranged from 64,8 % to 68,6%. At the same time, the average temperature was 36,7°C to 37,5°C, and the average RH was 49,9% up to 64,7%. The drying airflow speed at the fan input is 6,2 m/s and at the chimney 9,2 m/s. Moisture content during drying differs for each thickness depending on the location, with an average drying rate of 0,92%. During drying, the moisture content varied for each consistency depending on the site, with the drying rate at an average ISD of 0.92% w / hr. total electrical energy consumption of 32.57 kWh and energy in biomass combustion 1,416,600 kJ. The quality during rice drying starts from the initial moisture content of 17.78% to reach the final moisture content of 10.44%.
- Open Access
- 1 August 2021
- Published by LPPM Unsyiah in Jurnal Ilmiah Mahasiswa Pertanian
- Vol. 6 (3) , 178-183
Study Kinerja ISD dengan Penambahan Sistem Kontrol Suhu Udara dan Kelembaban pada Pengeringan Gabah
Abstrak. Pengeringan padi menggunakan in-store dryer (ISD) memiliki keunggulan seperti kemudahan dalam pengendalian suhu dan tidak terpengaruh cuaca. Penambahan sistem kontrol pada ISD diharapkan dapat meningkatkan kinerja ISD serta menjaga kestabilan suhu dan RH selama pengeringan berlangsung. Metode penelitian ini dilakukan dengan mengeringkan 100 kg gabah menggunakan ISD dengan kadar air awal 17,77%, yang dikeringkan hingga mencapai kadar air kering simpan (maks 14%). Parameter yang dianalisis berupa suhu, kelembaban relatif (RH), kecepatan aliran udara pengering, kadar air dan laju pengeringan. Hasil penelitian menunjukkan bahwa pemasangan sistem kontrol dapat mengendalikan dan mempertahankan suhu ISD agar selalu berada di atas suhu lingkungan dengan selisih sekitar 5,1°C. Selain itu sistem kontrol juga dapat mengendalikan RH ISD agar lebih kecil dari RH lingkungan. Sistem kontrol juga mempengaruhi laju pengeringan, dimana laju pengeringan meningkat seiring meningkatnya kinerja sistem kontrol dalam mengendalikan suhu dan RH ISD. ISD Performance Study with The Addition of Air Temperature and Humidity Control System on Drying Paddy Grain Abstract. Drying paddy grain using an In-Store Dryer (ISD) has advantages such as ease of temperature control and is not affected by the weather. The addition of an ISD control system is expected to improve the ISD performance and maintain a stable temperature and RH during the drying process. This research method was carried out by drying 100 kg of paddy grain using ISD with an initial moisture content of 17.77%, dried to a storage dry moisture content (max 14%). Parameters analyzed were temperature, relative humidity (RH), drying airflow velocity, moisture content, and drying rate. The results showed that the installation of the control system could control and maintain the ISD temperature. It is always above the ambient temperature, with a difference of about 5.1°C. In addition, the control system can also control the ISD RH to be smaller than the environmental RH. The control system also affects the drying rate, where the drying rate increases with the increase in the control system's performance in controlling ISD temperature and RH.
- 1 August 2021
- Published by LPPM Unsyiah in Jurnal Ilmiah Mahasiswa Pertanian
- Vol. 6 (3) , 178-183
Open AccessStudy Kinerja ISD dengan Penambahan Sistem Kontrol Suhu Udara dan Kelembaban pada Pengeringan Gabah
Abstrak. Pengeringan padi menggunakan in-store dryer (ISD) memiliki keunggulan seperti kemudahan dalam pengendalian suhu dan tidak terpengaruh cuaca. Penambahan sistem kontrol pada ISD diharapkan dapat meningkatkan kinerja ISD serta menjaga kestabilan suhu dan RH selama pengeringan berlangsung. Metode penelitian ini dilakukan dengan mengeringkan 100 kg gabah menggunakan ISD dengan kadar air awal 17,77%, yang dikeringkan hingga mencapai kadar air kering simpan (maks 14%). Parameter yang dianalisis berupa suhu, kelembaban relatif (RH), kecepatan aliran udara pengering, kadar air dan laju pengeringan. Hasil penelitian menunjukkan bahwa pemasangan sistem kontrol dapat mengendalikan dan mempertahankan suhu ISD agar selalu berada di atas suhu lingkungan dengan selisih sekitar 5,1°C. Selain itu sistem kontrol juga dapat mengendalikan RH ISD agar lebih kecil dari RH lingkungan. Sistem kontrol juga mempengaruhi laju pengeringan, dimana laju pengeringan meningkat seiring meningkatnya kinerja sistem kontrol dalam mengendalikan suhu dan RH ISD. ISD Performance Study with The Addition of Air Temperature and Humidity Control System on Drying Paddy Grain Abstract. Drying paddy grain using an In-Store Dryer (ISD) has advantages such as ease of temperature control and is not affected by the weather. The addition of an ISD control system is expected to improve the ISD performance and maintain a stable temperature and RH during the drying process. This research method was carried out by drying 100 kg of paddy grain using ISD with an initial moisture content of 17.77%, dried to a storage dry moisture content (max 14%). Parameters analyzed were temperature, relative humidity (RH), drying airflow velocity, moisture content, and drying rate. The results showed that the installation of the control system could control and maintain the ISD temperature. It is always above the ambient temperature, with a difference of about 5.1°C. In addition, the control system can also control the ISD RH to be smaller than the environmental RH. The control system also affects the drying rate, where the drying rate increases with the increase in the control system's performance in controlling ISD temperature and RH.
- Open Access
- 1 January 2021
- Published by Coffee Science in Coffee Science
- Vol. 16, 1-9
Sensory Assessment of Gayo arabica coffee taste based on various varieties and manual brewing devices
Arabica coffee (Coffea Arabica) becomes one of the most in-demand types by the community due to its typical taste. The right method and coffee brewing device are needed to obtain this typical taste of coffee. One of the coffee brewing methods that keeps developing until now is the manual brewing method. This study aims to find the sensory characteristic of Gayo Arabica coffee taste in various varieties with manual brewing devices by using Analytical Hierarchy Process (AHP) method. Manual brewing devices used were Vietnam Drip, French Press, V60, Eva Solo, and Filter, while the chosen varieties are Tim-tim (Gayo 1), Bor-bor (Gayo 2), and P88. The study result showed that based on the preference of product acceptance by the panelists, the most chosen criteria of taste sensory were flavor (0.253), followed by aftertaste (0.222), sweetness (0204), acidity (0.165), and body (0.155). The variety chosen as the best variety with manual brewing was Tim-tim in various manual brewing devices, which are V60 (0.156), French Press (0146), and Eva Solo (0.140). The next alternatives brewing devices were Vietnam Drip (0.127) and Filter (0.109). Thus, it can be concluded that flavor is the top priority that influences Gayo Arabica coffee's taste. Tim-tim with manual brewing devices (V60, French Press, and Eva Solo) is preferred over other varieties in this study. This finding also becomes a recommendation that the variety for the best serving of Gayo Arabica coffee brew with the most preferred taste with manual brewing devices is Tim-tim. Key words: Arabica coffee; Manual brewing; AHP method; Pairwise comparison.
- 1 January 2021
- Published by Coffee Science in Coffee Science
- Vol. 16, 1-9
Open AccessSensory Assessment of Gayo arabica coffee taste based on various varieties and manual brewing devices
Arabica coffee (Coffea Arabica) becomes one of the most in-demand types by the community due to its typical taste. The right method and coffee brewing device are needed to obtain this typical taste of coffee. One of the coffee brewing methods that keeps developing until now is the manual brewing method. This study aims to find the sensory characteristic of Gayo Arabica coffee taste in various varieties with manual brewing devices by using Analytical Hierarchy Process (AHP) method. Manual brewing devices used were Vietnam Drip, French Press, V60, Eva Solo, and Filter, while the chosen varieties are Tim-tim (Gayo 1), Bor-bor (Gayo 2), and P88. The study result showed that based on the preference of product acceptance by the panelists, the most chosen criteria of taste sensory were flavor (0.253), followed by aftertaste (0.222), sweetness (0204), acidity (0.165), and body (0.155). The variety chosen as the best variety with manual brewing was Tim-tim in various manual brewing devices, which are V60 (0.156), French Press (0146), and Eva Solo (0.140). The next alternatives brewing devices were Vietnam Drip (0.127) and Filter (0.109). Thus, it can be concluded that flavor is the top priority that influences Gayo Arabica coffee's taste. Tim-tim with manual brewing devices (V60, French Press, and Eva Solo) is preferred over other varieties in this study. This finding also becomes a recommendation that the variety for the best serving of Gayo Arabica coffee brew with the most preferred taste with manual brewing devices is Tim-tim. Key words: Arabica coffee; Manual brewing; AHP method; Pairwise comparison.