Mary Myla Andamon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mary Myla Andamon has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Priyadarsini Rajagopalan
Sustainable Building Innovation Lab., School of Property, Construction and Project Management, RMIT University, Melbourne, VIC 3000, Australia
9 shared publications - Jin Woo
Post-Carbon Research Centre, RMIT University, 124 La Trobe Street, Melbourne, Victoria 3000, Australia Sustainable Building Innovation Laboratory (SBi Lab), School of Property, Construction and Project Management, RMIT University, 124 La Trobe Street, Melbourne, Victoria 3000, Australia
3 shared publications - Mohana Motiei
RMIT University
2 shared publications - Trivess Moore
RMIT University
2 shared publications - Usha Iyer-Raniga
School of Property, Construction and Project Management, RMIT University, Melbourne, VIC 3000, Australia
2 shared publications Andrew Carre
RMIT University
1 shared publication
Latest Publications
- Open Access
Cooling Strategies for the Effective Mitigation of Summer Thermal Stress in City Laneways
This study explored a range of cooling interventions suitable for city laneways where space for greening opportunities is constrained. Five individual cooling interventions namely, PVC shading, cool pavement, small canopy trees, green wall and water mist, as well as multiple combinations of these individual cooling interventions were tested in a narrow laneway in the temperate setting of Melbourne, Australia. The impact of various cooling interventions was assessed by evaluating microclimatic parameters—air temperature (Ta), relative humidity (RH), mean radiant temperature (TMRT)—alongside two thermal comfort indices, Physiological Equivalent Temperature (PET) and Universal Thermal Climate Index (UTCI). When each intervention was analysed individually, water mist was the best performing with Ta, PET and UTCI reduction. This was followed by PVC shading, small canopy trees and green walls. Cool pavement had the lowest Ta reduction and minimal thermal comfort impact. While green provided marginal reductions in thermal comfort indices, the effects were insufficient for standalone cooling. They were most effective when integrated with other cooling interventions. For example, when green walls were combined with water mist, a Ta reduction of 1.49 K and a TMRT reduction 2.57 K were obtained. The water mist system as an individual cooling intervention or as part of a combined intervention had an impact on Ta with a reduction of maximum 1.3 K and 1.76 K, respectively. The water mist had a UTCI reduction of 1.25 K, and the water mist combined with green wall had a PET reduction of 1.84 K. The novel contribution of this study to climate-sensitive urban design is the suite of practical, site-specific interventions for extreme summer conditions. These findings provide a framework for planners and designers to evaluate and implement optimal cooling strategies tailored to the unique microclimate demands of narrow urban laneways.
Open AccessCooling Strategies for the Effective Mitigation of Summer Thermal Stress in City Laneways
This study explored a range of cooling interventions suitable for city laneways where space for greening opportunities is constrained. Five individual cooling interventions namely, PVC shading, cool pavement, small canopy trees, green wall and water mist, as well as multiple combinations of these individual cooling interventions were tested in a narrow laneway in the temperate setting of Melbourne, Australia. The impact of various cooling interventions was assessed by evaluating microclimatic parameters—air temperature (Ta), relative humidity (RH), mean radiant temperature (TMRT)—alongside two thermal comfort indices, Physiological Equivalent Temperature (PET) and Universal Thermal Climate Index (UTCI). When each intervention was analysed individually, water mist was the best performing with Ta, PET and UTCI reduction. This was followed by PVC shading, small canopy trees and green walls. Cool pavement had the lowest Ta reduction and minimal thermal comfort impact. While green provided marginal reductions in thermal comfort indices, the effects were insufficient for standalone cooling. They were most effective when integrated with other cooling interventions. For example, when green walls were combined with water mist, a Ta reduction of 1.49 K and a TMRT reduction 2.57 K were obtained. The water mist system as an individual cooling intervention or as part of a combined intervention had an impact on Ta with a reduction of maximum 1.3 K and 1.76 K, respectively. The water mist had a UTCI reduction of 1.25 K, and the water mist combined with green wall had a PET reduction of 1.84 K. The novel contribution of this study to climate-sensitive urban design is the suite of practical, site-specific interventions for extreme summer conditions. These findings provide a framework for planners and designers to evaluate and implement optimal cooling strategies tailored to the unique microclimate demands of narrow urban laneways.
- 3 December 2025
- Published by Architectural Science Association
Effects of light on alertness: A review of field studies conducted in office environments
Https://doi.org/10.65388/LPQX5190 The effects of lighting on alertness during the daytime have been extensively studied. However, findings remain largely inconclusive. These inconsistencies may be attributed to variations in methodological approaches, as well as the complexities of field research associated with the dynamic nature of real-life settings. This paper presents a review of the methodological considerations...
- 3 December 2025
- Published by Architectural Science Association
Effects of light on alertness: A review of field studies conducted in office environments
Https://doi.org/10.65388/LPQX5190 The effects of lighting on alertness during the daytime have been extensively studied. However, findings remain largely inconclusive. These inconsistencies may be attributed to variations in methodological approaches, as well as the complexities of field research associated with the dynamic nature of real-life settings. This paper presents a review of the methodological considerations...
- 20 April 2025
- Published by Springer Nature
- p. 433-442
Circular Building (CB) Adoption: Identifying Barriers and Enablers Among Australian AEC Stakeholders
- 20 April 2025
- Published by Springer Nature
- p. 433-442
Circular Building (CB) Adoption: Identifying Barriers and Enablers Among Australian AEC Stakeholders
- Open Access
Advancing Circular Buildings: A Review of Building Strategies for AEC Stakeholders
The uptake of a circular economy (CE) in the building sector is challenging, primarily due to the complexity associated with the design process and the dynamic interaction among architects, engineers, and construction (AEC) stakeholders. The standard and typical design process and construction methods raise concerns about building life cycles. Buildings should not only fulfill current needs, but one also needs to consider how they will function in the future and throughout their lifetime. To address these complexities, early planning is required to guide designers in holistically applying systems thinking to deliver CE outcomes. This paper outlines a critical review of CE implementation in buildings, with a proposed trifecta of approaches that significantly contribute to the development of circular buildings (CBs). The findings outline a proposed visualized framework with a conceptual formula that integrates CE design strategies to simplify and enhance AEC stakeholders’ perception of the circularity sequence in buildings. By strategically integrating loop-based strategies with the value retention process (VRP) and design for X (DFX) strategies, along with efficient assessment tools and technologies, it becomes feasible to embrace a CE during the design phase. The outcome of this review informs AEC stakeholders to systematically and strategically integrate the critical dimensions of a CE throughout the building life cycle, striking a balance between environmental concern, economic value, and future needs.
Open AccessAdvancing Circular Buildings: A Review of Building Strategies for AEC Stakeholders
The uptake of a circular economy (CE) in the building sector is challenging, primarily due to the complexity associated with the design process and the dynamic interaction among architects, engineers, and construction (AEC) stakeholders. The standard and typical design process and construction methods raise concerns about building life cycles. Buildings should not only fulfill current needs, but one also needs to consider how they will function in the future and throughout their lifetime. To address these complexities, early planning is required to guide designers in holistically applying systems thinking to deliver CE outcomes. This paper outlines a critical review of CE implementation in buildings, with a proposed trifecta of approaches that significantly contribute to the development of circular buildings (CBs). The findings outline a proposed visualized framework with a conceptual formula that integrates CE design strategies to simplify and enhance AEC stakeholders’ perception of the circularity sequence in buildings. By strategically integrating loop-based strategies with the value retention process (VRP) and design for X (DFX) strategies, along with efficient assessment tools and technologies, it becomes feasible to embrace a CE during the design phase. The outcome of this review informs AEC stakeholders to systematically and strategically integrate the critical dimensions of a CE throughout the building life cycle, striking a balance between environmental concern, economic value, and future needs.
- Open Access
- 24 April 2023
- Published by Elsevier in Building and Environment
- Vol. 237
Evaluation of ventilation in Australian school classrooms using long-term indoor CO2 concentration measurements
- 24 April 2023
- Published by Elsevier in Building and Environment
- Vol. 237
Open AccessEvaluation of ventilation in Australian school classrooms using long-term indoor CO2 concentration measurements
- 7 February 2023
- Published by Elsevier in Energy and Buildings
- Vol. 284, 112859
A holistic assessment of indoor environmental quality perception in Australian high-rise social housing
- 7 February 2023
- Published by Elsevier in Energy and Buildings
- Vol. 284, 112859
A holistic assessment of indoor environmental quality perception in Australian high-rise social housing
- 4 March 2022
- Published by Elsevier in Building and Environment
- Vol. 214
An evaluation of measured indoor conditions and student performance using d2 Test of Attention
- 4 March 2022
- Published by Elsevier in Building and Environment
- Vol. 214
An evaluation of measured indoor conditions and student performance using d2 Test of Attention
- Open Access
- 20 October 2021
- Published by Taylor & Francis in Architectural Science Review
- Vol. 65 (1) , 1-13
Year long monitoring of indoor air quality and ventilation in school classrooms in Victoria, Australia
Children under 15 years spend over six hours per day in school buildings and are particularly vulnerable to the effects of poor indoor air quality (IAQ). However long-term monitoring of indoor environmental conditions is limited in Australian schools. This study evaluates IAQ in ten Australian school classrooms in the temperate settings of Victoria. Temperature, relative humidity, CO2 concentration, PM2.5 and PM10 were monitored over a period of one year. The temperature and relative humidity values in the monitored classrooms ranged between 18.7°C and 23.8°C and 44–63 RH%, respectively, indicating that the conditions have been mechanically controlled. The average air change (ACH) rates in the 10 school classrooms varied considerably (range: 0.7–4.83 ACH). The ventilation rates ranged from 1.6 Ls−1 to 11.5 Ls−1 per person with 7 out of the 10 classrooms showing ventilation rates below the recommended minimum. This study points to the need for increasing ventilation rates in classrooms.
- 20 October 2021
- Published by Taylor & Francis in Architectural Science Review
- Vol. 65 (1) , 1-13
Open AccessYear long monitoring of indoor air quality and ventilation in school classrooms in Victoria, Australia
Children under 15 years spend over six hours per day in school buildings and are particularly vulnerable to the effects of poor indoor air quality (IAQ). However long-term monitoring of indoor environmental conditions is limited in Australian schools. This study evaluates IAQ in ten Australian school classrooms in the temperate settings of Victoria. Temperature, relative humidity, CO2 concentration, PM2.5 and PM10 were monitored over a period of one year. The temperature and relative humidity values in the monitored classrooms ranged between 18.7°C and 23.8°C and 44–63 RH%, respectively, indicating that the conditions have been mechanically controlled. The average air change (ACH) rates in the 10 school classrooms varied considerably (range: 0.7–4.83 ACH). The ventilation rates ranged from 1.6 Ls−1 to 11.5 Ls−1 per person with 7 out of the 10 classrooms showing ventilation rates below the recommended minimum. This study points to the need for increasing ventilation rates in classrooms.
- 20 July 2021
- Published by Taylor & Francis in Construction Management and Economics
- Vol. 39 (8) , 669-686
Does gender really matter? A closer look at early career women in construction
Despite the increasing number of women studying built environment degrees in higher education, the construction industry has not seen an increase in the percentage of female professionals. Women’s experiences in the early stages of their career have a critical influence on their future career intentions, including leaving the industry. This study was motivated to explore the transition experiences from university into work for early career female professionals working in the Australian construction industry. Nineteen interviews were conducted to collect qualitative data which was thematically analysed. Findings indicate that women are primarily driven by an intrinsic motivation to pursue construction careers. Women have both positive and negative experiences during their transition processes. The positive transition experiences are attributed to supportive and respectful relationships with colleagues and the availability of and access to structured graduate or cadetship training programs. Regarding negative experiences, findings suggest that apart from common challenges associated with transition for all entrants, women must contend with additional gender-based challenges. Many participants intend to stay in construction for the next five years but have concerns about the possibility of combining work and family when they decide to have children and how their careers might be affected. The research provides important practical implications for construction organizations in terms of improving women’s transition experience into the industry, maintaining their interest in construction careers and enhancing subsequent retention.
- 20 July 2021
- Published by Taylor & Francis in Construction Management and Economics
- Vol. 39 (8) , 669-686
Does gender really matter? A closer look at early career women in construction
Despite the increasing number of women studying built environment degrees in higher education, the construction industry has not seen an increase in the percentage of female professionals. Women’s experiences in the early stages of their career have a critical influence on their future career intentions, including leaving the industry. This study was motivated to explore the transition experiences from university into work for early career female professionals working in the Australian construction industry. Nineteen interviews were conducted to collect qualitative data which was thematically analysed. Findings indicate that women are primarily driven by an intrinsic motivation to pursue construction careers. Women have both positive and negative experiences during their transition processes. The positive transition experiences are attributed to supportive and respectful relationships with colleagues and the availability of and access to structured graduate or cadetship training programs. Regarding negative experiences, findings suggest that apart from common challenges associated with transition for all entrants, women must contend with additional gender-based challenges. Many participants intend to stay in construction for the next five years but have concerns about the possibility of combining work and family when they decide to have children and how their careers might be affected. The research provides important practical implications for construction organizations in terms of improving women’s transition experience into the industry, maintaining their interest in construction careers and enhancing subsequent retention.