Lidiia Dziuba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lidiia Dziuba has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Oksana Chmyr
Львівський державний університет безпеки життєдіяльност
10 shared publications - Mariia Pylypchuk
Ukrainian National Forestry University
4 shared publications - Ihor Rebezniuk
Ukrainian National Forestry University
2 shared publications M. I. Kusiy
Львівський державний університет безпеки життєдіяльност
2 shared publications- O. V. Menshykova
Львівський державний університет безпеки життєдіяльност
2 shared publications - Roman Pavliuk
Ukrainian National Forestry University
2 shared publications
Latest Publications
- Open Access
- 14 July 2026
- Published by Sumy State University in Journal of Engineering Sciences
- Vol. 13 (2) , A1
Substantiation of the Design Parameters of a Sectional Screen for a Drum-Type Wood Chipping Machine
The production of wood chips for the pulp-and-paper, wood-based panel, and bioenergy industries requires maintaining a stable granulometric composition (particle-size distribution) of the product. A promising approach to improving chip quality is optimizing screening systems in drum wood chippers. This study aims to develop a mathematical model of the interaction between wood chips and the screen and to substantiate its rational design parameters. The study used methods of solid-body motion mechanics, mathematical modeling, and experimental testing. A mathematical model of the impact interaction between wood chip particles and the screen was developed, accounting for the kinematic parameters of particle motion and the material’s physical and mechanical properties. A relationship for determining the number of sections of a stepped screen was derived, and the patterns governing particle movement within the inter-drum space were established. The influence of the number of screen sections and the radial distance between the screen and the drum on the efficiency of wood chip sizing was experimentally investigated. It was found that using a sectional screen improves the separation of substandard particles and the fractional composition of the output product. The following rational parameters were obtained: 11 screen sections and a radial spacing of 15 mm. Under these conditions, the proportion of the substandard fraction is 8–15 %, whereas for a plate-type screen it is 25–32 %. The results may be used in the design and modernization of drum wood chippers.
- 14 July 2026
- Published by Sumy State University in Journal of Engineering Sciences
- Vol. 13 (2) , A1
Open AccessSubstantiation of the Design Parameters of a Sectional Screen for a Drum-Type Wood Chipping Machine
The production of wood chips for the pulp-and-paper, wood-based panel, and bioenergy industries requires maintaining a stable granulometric composition (particle-size distribution) of the product. A promising approach to improving chip quality is optimizing screening systems in drum wood chippers. This study aims to develop a mathematical model of the interaction between wood chips and the screen and to substantiate its rational design parameters. The study used methods of solid-body motion mechanics, mathematical modeling, and experimental testing. A mathematical model of the impact interaction between wood chip particles and the screen was developed, accounting for the kinematic parameters of particle motion and the material’s physical and mechanical properties. A relationship for determining the number of sections of a stepped screen was derived, and the patterns governing particle movement within the inter-drum space were established. The influence of the number of screen sections and the radial distance between the screen and the drum on the efficiency of wood chip sizing was experimentally investigated. It was found that using a sectional screen improves the separation of substandard particles and the fractional composition of the output product. The following rational parameters were obtained: 11 screen sections and a radial spacing of 15 mm. Under these conditions, the proportion of the substandard fraction is 8–15 %, whereas for a plate-type screen it is 25–32 %. The results may be used in the design and modernization of drum wood chippers.
- 5 January 2026
- Published by Sumy State University in Journal of Engineering Sciences
- Vol. 13 (1) , A1
Substantiation of the Design Parameters of the Abrasive Wheel for Sharpening Woodworking Saws
The sharpening of woodworking saws is a crucial operation in ensuring high-quality wood cutting. To avoid burns, burrs, and bending of the saw tooth during sharpening, it is necessary to provide an appropriate temperature regime in the contact area of the abrasive wheel and the cutting edge of the saw tooth. Abrasive wheels with an intermittent working surface enable the creation of a temperature in the sharpening zone that does not reach the point of thermal saturation. The article aims to substantiate the design parameters of an abrasive wheel with an intermittent working surface for sharpening woodworking saws based on the model of thermal interaction between the abrasive wheel and the saw tooth. To determine the time during which the surface of the cutting edge of the saw tooth is thermally saturated, a mathematical model of the thermal interaction between the abrasive wheel and the saw tooth during sharpening was developed based on solving the Cauchy problem for the differential equation of thermal conductivity using the Fourier transform. The dependence of the thermal saturation time on the longitudinal feed rate of the wheel was found. The lengths of the cutting segments of the abrasive wheel working surface, as well as the lengths of intermittent gaps (non-cutting segments), were determined taking into account the time of thermal saturation of the saw tooth.
- 5 January 2026
- Published by Sumy State University in Journal of Engineering Sciences
- Vol. 13 (1) , A1
Substantiation of the Design Parameters of the Abrasive Wheel for Sharpening Woodworking Saws
The sharpening of woodworking saws is a crucial operation in ensuring high-quality wood cutting. To avoid burns, burrs, and bending of the saw tooth during sharpening, it is necessary to provide an appropriate temperature regime in the contact area of the abrasive wheel and the cutting edge of the saw tooth. Abrasive wheels with an intermittent working surface enable the creation of a temperature in the sharpening zone that does not reach the point of thermal saturation. The article aims to substantiate the design parameters of an abrasive wheel with an intermittent working surface for sharpening woodworking saws based on the model of thermal interaction between the abrasive wheel and the saw tooth. To determine the time during which the surface of the cutting edge of the saw tooth is thermally saturated, a mathematical model of the thermal interaction between the abrasive wheel and the saw tooth during sharpening was developed based on solving the Cauchy problem for the differential equation of thermal conductivity using the Fourier transform. The dependence of the thermal saturation time on the longitudinal feed rate of the wheel was found. The lengths of the cutting segments of the abrasive wheel working surface, as well as the lengths of intermittent gaps (non-cutting segments), were determined taking into account the time of thermal saturation of the saw tooth.
- Open Access
- 1 January 2025
- Published by Lviv State University of Life Safety in Bulletin of Lviv State University of Life Safety
- Vol. 32, 212-220
RISK ASSESSMENT OF HAZARDOUS EVENTS AND EMERGENCIES IN A MUNICIPALITY
Assessment of the risks of hazardous events is an essential element of emergency risk management. The objective of such management is to identify threats and possible negative consequences of hazardous events, assess the potential for their prevention or mitigation, and determine the feasibility of implementing preventive measures, considering the cost of their realization in relation to the scale of potential losses or damages, as well as insurance costs and other related factors. The functioning of the emergency risk management system for natural and man-made hazards, along with the modern civil protection system, is a necessary condition for the implementation of European safety standards. Given the importance of enhancing the level of protection for the population and the territories of urban, settlement, and rural municipalities in the context of decentralization reform in Ukraine, as well as the introduction of a risk-oriented approach in strategic analysis and municipal planning, this study proposes a methodology for assessing the risks of emergencies and hazardous events of technogenic, natural, social, and military origin. A register of such events has been developed to identify risks. The basis for risk analysis and assessment includes statistical data on hazardous events and emergencies that occurred in the past, as well as expert evaluations provided by specialists when such data are unavailable. The risk analysis of identified hazardous events within a municipality involves determining the probability level of their occurrence and assessing the severity of their impact. The study proposes descriptions of five probability levels for hazardous events and five levels of impact severity according to the criteria of “people” and “property.” To establish the probability level of hazardous events, the proposed methodology suggests using statistical data over a three-year period if a hazardous event of a specific type has occurred within the community. If such an event has not occurred within the community, but an emergency of the corresponding type has taken place elsewhere in Ukraine, statistical periods of three, ten, and thirty years are used for analysis. Оцінювання ризиків виникнення небезпечних подій є необхідним елементом управління ризиками виникнення надзвичайних ситуацій. Завданням такого управління є виявлення загроз та можливих негативних наслідків небезпечних подій, оцінка можливостей їх запобігання або мінімізації наслідків; визначення доцільності запровадження профілактичних заходів залежно від витрат на їх реалізацію у співвідношенні до обсягів можливих втрат чи збитків з урахуванням витрат на страхування тощо. Функціонування системи управління ризиками виникнення надзвичайних ситуацій природного й техногенного характеру та сучасної системи цивільного захисту є необхідною умовою запровадження європейських стандартів безпечної життєдіяльності. Зважаючи на актуальність підвищення ступеня захищеності населення і території міських, селищних, сільських територіальних громад від надзвичайних ситуацій в контексті реформи децентралізації влади в Україні; запровадження ризик орієнтованого підходу в системі стратегічного аналізу і планування діяльності територіальних громад, в роботі запропоновано методику оцінювання ризиків виникнення надзвичайних ситуацій та небезпечних подій техногенного, природного, соціального та воєнного характеру. Для ідентифікації ризиків укладено реєстр таких подій. Підґрунтям для аналізу та оцінювання ризиків є статистичні дані про небезпечні події та надзвичайні ситуації, які відбувалися у минулому, та експертні оцінки спеціалістів у разі відсутності таких даних. Аналіз ризиків виникнення ідентифікованих небезпечних подій у територіальній громаді полягає у визначенні рівня ймовірності їх виникнення та встановленні тяжкості впливу. Запропоновано описи п’яти рівнів ймовірності виникнення небезпечних подій та п’яти рівнів тяжкості впливу цих подій за критеріями «люди» та «майно». Для встановлення рівня ймовірності виникнення небезпечних подій у розробленій методиці запропоновано використовувати аналіз статистичної інформації за період три роки у разі виникнення небезпечної події певного типу на території...
- 1 January 2025
- Published by Lviv State University of Life Safety in Bulletin of Lviv State University of Life Safety
- Vol. 32, 212-220
Open AccessRISK ASSESSMENT OF HAZARDOUS EVENTS AND EMERGENCIES IN A MUNICIPALITY
Assessment of the risks of hazardous events is an essential element of emergency risk management. The objective of such management is to identify threats and possible negative consequences of hazardous events, assess the potential for their prevention or mitigation, and determine the feasibility of implementing preventive measures, considering the cost of their realization in relation to the scale of potential losses or damages, as well as insurance costs and other related factors. The functioning of the emergency risk management system for natural and man-made hazards, along with the modern civil protection system, is a necessary condition for the implementation of European safety standards. Given the importance of enhancing the level of protection for the population and the territories of urban, settlement, and rural municipalities in the context of decentralization reform in Ukraine, as well as the introduction of a risk-oriented approach in strategic analysis and municipal planning, this study proposes a methodology for assessing the risks of emergencies and hazardous events of technogenic, natural, social, and military origin. A register of such events has been developed to identify risks. The basis for risk analysis and assessment includes statistical data on hazardous events and emergencies that occurred in the past, as well as expert evaluations provided by specialists when such data are unavailable. The risk analysis of identified hazardous events within a municipality involves determining the probability level of their occurrence and assessing the severity of their impact. The study proposes descriptions of five probability levels for hazardous events and five levels of impact severity according to the criteria of “people” and “property.” To establish the probability level of hazardous events, the proposed methodology suggests using statistical data over a three-year period if a hazardous event of a specific type has occurred within the community. If such an event has not occurred within the community, but an emergency of the corresponding type has taken place elsewhere in Ukraine, statistical periods of three, ten, and thirty years are used for analysis. Оцінювання ризиків виникнення небезпечних подій є необхідним елементом управління ризиками виникнення надзвичайних ситуацій. Завданням такого управління є виявлення загроз та можливих негативних наслідків небезпечних подій, оцінка можливостей їх запобігання або мінімізації наслідків; визначення доцільності запровадження профілактичних заходів залежно від витрат на їх реалізацію у співвідношенні до обсягів можливих втрат чи збитків з урахуванням витрат на страхування тощо. Функціонування системи управління ризиками виникнення надзвичайних ситуацій природного й техногенного характеру та сучасної системи цивільного захисту є необхідною умовою запровадження європейських стандартів безпечної життєдіяльності. Зважаючи на актуальність підвищення ступеня захищеності населення і території міських, селищних, сільських територіальних громад від надзвичайних ситуацій в контексті реформи децентралізації влади в Україні; запровадження ризик орієнтованого підходу в системі стратегічного аналізу і планування діяльності територіальних громад, в роботі запропоновано методику оцінювання ризиків виникнення надзвичайних ситуацій та небезпечних подій техногенного, природного, соціального та воєнного характеру. Для ідентифікації ризиків укладено реєстр таких подій. Підґрунтям для аналізу та оцінювання ризиків є статистичні дані про небезпечні події та надзвичайні ситуації, які відбувалися у минулому, та експертні оцінки спеціалістів у разі відсутності таких даних. Аналіз ризиків виникнення ідентифікованих небезпечних подій у територіальній громаді полягає у визначенні рівня ймовірності їх виникнення та встановленні тяжкості впливу. Запропоновано описи п’яти рівнів ймовірності виникнення небезпечних подій та п’яти рівнів тяжкості впливу цих подій за критеріями «люди» та «майно». Для встановлення рівня ймовірності виникнення небезпечних подій у розробленій методиці запропоновано використовувати аналіз статистичної інформації за період три роки у разі виникнення небезпечної події певного типу на території...
- Open Access
- 1 January 2025
- Published by Sumy State University in Journal of Engineering Sciences
- Vol. 12 (1) , A12-A19
Model of Parametric Reliability of Woodworking Machine Tools
The article aims to develop a model of the parametric reliability of woodworking machine tools based on the criterion of technological accuracy. For this purpose, a mathematical model of the operating time of a woodworking machine to parametric failure was created using a scheme for changing the size of the workpiece. A linear differential equation characterizing the change in the dimensions for the machined workpiece was obtained based on the assumption of a linear relationship between the wear rate of the machine tool components and its technological accuracy. The differential equation was solved analytically using a Bernoulli approach. As a result, an analytical dependence was obtained for changing the workpiece dimensions. This dependence characterizes the technological accuracy of the machine tool during the overhaul period. The operating time intervals for woodworking machines between parametric failures were also evaluated. The probabilities of failure-free operation were calculated by considering the alpha probability density function for operating time intervals to failure of woodworking machine tools. Finally, it was found that the probability of failure-free operation of machine tools significantly depends on the time-depending parameter, which characterizes the relative durability of the machine tool.
- 1 January 2025
- Published by Sumy State University in Journal of Engineering Sciences
- Vol. 12 (1) , A12-A19
Open AccessModel of Parametric Reliability of Woodworking Machine Tools
The article aims to develop a model of the parametric reliability of woodworking machine tools based on the criterion of technological accuracy. For this purpose, a mathematical model of the operating time of a woodworking machine to parametric failure was created using a scheme for changing the size of the workpiece. A linear differential equation characterizing the change in the dimensions for the machined workpiece was obtained based on the assumption of a linear relationship between the wear rate of the machine tool components and its technological accuracy. The differential equation was solved analytically using a Bernoulli approach. As a result, an analytical dependence was obtained for changing the workpiece dimensions. This dependence characterizes the technological accuracy of the machine tool during the overhaul period. The operating time intervals for woodworking machines between parametric failures were also evaluated. The probabilities of failure-free operation were calculated by considering the alpha probability density function for operating time intervals to failure of woodworking machine tools. Finally, it was found that the probability of failure-free operation of machine tools significantly depends on the time-depending parameter, which characterizes the relative durability of the machine tool.
- Open Access
- 2 August 2024
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 42,p. 296-298
ПРОГНОЗУВАННЯ РИЗИКІВ ПОЖЕЖНОЇ БЕЗПЕКИ ПІДПРИЄМСТВА МЕТОДАМИ МАТЕМАТИЧНОЇ СТАТИСТИКИ
Постановка проблеми. Забезпечення пожежної безпеки підприємств являється однією з основних умов їх успішної діяльності. Виникнення пожеж на підприємствах спричиняють травми працівників, матеріальні втрати, судові позови тощо. Все це впливає на зниження прибутку та вартості бізнесу. Тому проблеми оцінювання та управління ризиками пожежної безпеки підприємств є актуальними завданнями.
- 2 August 2024
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 42,p. 296-298
Open AccessПРОГНОЗУВАННЯ РИЗИКІВ ПОЖЕЖНОЇ БЕЗПЕКИ ПІДПРИЄМСТВА МЕТОДАМИ МАТЕМАТИЧНОЇ СТАТИСТИКИ
Постановка проблеми. Забезпечення пожежної безпеки підприємств являється однією з основних умов їх успішної діяльності. Виникнення пожеж на підприємствах спричиняють травми працівників, матеріальні втрати, судові позови тощо. Все це впливає на зниження прибутку та вартості бізнесу. Тому проблеми оцінювання та управління ризиками пожежної безпеки підприємств є актуальними завданнями.
- Open Access
- 28 June 2024
- Published by Lviv State University of Life Safety in Bulletin of Lviv State University of Life Safety
- Vol. 29, 110-118
ОЦІНКА РИЗИКІВ ПОЖЕЖНОЇ БЕЗПЕКИ ПІДПРИЄМСТВА
Невід’ємною частиною успішної бізнес-діяльності підприємств є забезпечення пожежної безпеки. Унаслідок зростання ризиків у сфері пожежної безпеки для підприємств підвищується ймовірність виникнення пожеж, які можуть спричинити виробничі травми працівників, матеріальні втрати, судові розгляди та позови тощо. Матеріальні втрати підприємства можуть полягати у зниженні прибутку та вартості бізнесу, витратах на усунення наслідків пожеж, штрафах та санкціях регулюючих органів. Для усіх підприємств, незалежно від форм власності, проблеми оцінювання та управління ризиками пожежної безпеки є актуальними завданнями. Тому метою роботи є оцінювання ризиків пожежної безпеки підприємства з використанням матриці SWOT-аналізу, де S – сильні сторони підприємства, W – слабкі сторони, O – можливості та T – загрози. Для досягнення мети розроблено перелік запитань щодо впливу зовнішнього та внутрішнього середовища на пожежну безпеку підприємства. До зовнішніх чинників ризику пожежної безпеки належать загрози T та можливості О, до переліку внутрішніх чинників – сильні сторони (переваги) S та слабкі сторони (вразливості) W підприємства. Перелік загроз для певного підприємства містив сім позицій: наявність хімічно небезпечних речовин; втрата електроживлення та розряди статичної електрики; збій роботи автономних виробничих систем; відсутність протипожежного водопостачання; стихійні лиха; отримання несанкціонованого доступу до технологічного процесу підприємства; необережне поводження з вогнем. Перелік вразливостей містить такі: вихід з ладу компресорів; відсутність резервного електропостачання; недостатній рівень фахової підготовки; відсутність комунікації між персоналом; некваліфікований персонал; недотримання правил ожежної безпеки; недотримання правил техніки безпеки; несправність виробничого обладнання. Результати експертних оцінок пожежної безпеки опрацьовано методом попарних порівнянь. Ітераційний алгоритм цього методу реалізовано в середовищі Excel. На підставі векторів коефіцієнтів відносної важливості елементів матриці SWOT-аналізу побудовано чотири порівняльні матриці, які є підгрунттям для прийняття управлінських рішень на підприємстві. Встановлено за результатами експертного оцінювання, що пріоритетною стосовно ризиків пожежної безпеки є наявність на підприємстві хімічно небезпечних речовин.
- 28 June 2024
- Published by Lviv State University of Life Safety in Bulletin of Lviv State University of Life Safety
- Vol. 29, 110-118
Open AccessОЦІНКА РИЗИКІВ ПОЖЕЖНОЇ БЕЗПЕКИ ПІДПРИЄМСТВА
Невід’ємною частиною успішної бізнес-діяльності підприємств є забезпечення пожежної безпеки. Унаслідок зростання ризиків у сфері пожежної безпеки для підприємств підвищується ймовірність виникнення пожеж, які можуть спричинити виробничі травми працівників, матеріальні втрати, судові розгляди та позови тощо. Матеріальні втрати підприємства можуть полягати у зниженні прибутку та вартості бізнесу, витратах на усунення наслідків пожеж, штрафах та санкціях регулюючих органів. Для усіх підприємств, незалежно від форм власності, проблеми оцінювання та управління ризиками пожежної безпеки є актуальними завданнями. Тому метою роботи є оцінювання ризиків пожежної безпеки підприємства з використанням матриці SWOT-аналізу, де S – сильні сторони підприємства, W – слабкі сторони, O – можливості та T – загрози. Для досягнення мети розроблено перелік запитань щодо впливу зовнішнього та внутрішнього середовища на пожежну безпеку підприємства. До зовнішніх чинників ризику пожежної безпеки належать загрози T та можливості О, до переліку внутрішніх чинників – сильні сторони (переваги) S та слабкі сторони (вразливості) W підприємства. Перелік загроз для певного підприємства містив сім позицій: наявність хімічно небезпечних речовин; втрата електроживлення та розряди статичної електрики; збій роботи автономних виробничих систем; відсутність протипожежного водопостачання; стихійні лиха; отримання несанкціонованого доступу до технологічного процесу підприємства; необережне поводження з вогнем. Перелік вразливостей містить такі: вихід з ладу компресорів; відсутність резервного електропостачання; недостатній рівень фахової підготовки; відсутність комунікації між персоналом; некваліфікований персонал; недотримання правил ожежної безпеки; недотримання правил техніки безпеки; несправність виробничого обладнання. Результати експертних оцінок пожежної безпеки опрацьовано методом попарних порівнянь. Ітераційний алгоритм цього методу реалізовано в середовищі Excel. На підставі векторів коефіцієнтів відносної важливості елементів матриці SWOT-аналізу побудовано чотири порівняльні матриці, які є підгрунттям для прийняття управлінських рішень на підприємстві. Встановлено за результатами експертного оцінювання, що пріоритетною стосовно ризиків пожежної безпеки є наявність на підприємстві хімічно небезпечних речовин.
- Open Access
- 31 August 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (7 (124)) , 13-20
Determining the frequency of transverse oscillations of an elastically fixed disk of a circular saw
The object of the study is a circular saw blade. An annular plate of constant thickness with a free outer contour and a fixed inner contour was taken as the calculation scheme of the saw blade. The real conditions for fixing the internal circuit correspond to the elastic fixing of the saw blade with clamping flanges on the shaft of the machine. For the accepted calculation scheme of the circular saw, the dynamic model was a fourth-order nonlinear differential equation of the transverse oscillations of the annular plate with the corresponding boundary conditions. The rotation of the circular saw was taken into account in the dynamic model due to the radial force in the middle surface of the ring plate. This force arises as a result of the action of centrifugal forces during the rotation of the saw blade. The solution to the fourth-order nonlinear differential equation was constructed using the Bubnov-Galyorkin numerical method. The boundary conditions for constructing the solution were as follows: the outer contour of the saw disk was considered free; the inner contour of the saw disk – elastically fixed with a certain stiffness coefficient. The solution was implemented in the Maple 15 mathematical environment in the form of a developed program. According to the obtained frequency equation, the values of cyclic and natural frequencies of transverse oscillations of circular saw disks of different thicknesses with the same radius of the inner contour and three values of the radii of the outer contour were determined: 150 mm, 200 m, and 250 mm. The effect of the rigidity of the internal contour fixing and the angular speed of rotation of the saw blade on the natural frequencies of transverse oscillations was studied. The study was performed for saw disks in the case of oscillations with one, two, and three nodal diameters. It was established that the rigidity of the internal contour of the saw blade has the greatest influence on the natural frequency of transverse oscillations with one nodal diameter
- 31 August 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (7 (124)) , 13-20
Open AccessDetermining the frequency of transverse oscillations of an elastically fixed disk of a circular saw
The object of the study is a circular saw blade. An annular plate of constant thickness with a free outer contour and a fixed inner contour was taken as the calculation scheme of the saw blade. The real conditions for fixing the internal circuit correspond to the elastic fixing of the saw blade with clamping flanges on the shaft of the machine. For the accepted calculation scheme of the circular saw, the dynamic model was a fourth-order nonlinear differential equation of the transverse oscillations of the annular plate with the corresponding boundary conditions. The rotation of the circular saw was taken into account in the dynamic model due to the radial force in the middle surface of the ring plate. This force arises as a result of the action of centrifugal forces during the rotation of the saw blade. The solution to the fourth-order nonlinear differential equation was constructed using the Bubnov-Galyorkin numerical method. The boundary conditions for constructing the solution were as follows: the outer contour of the saw disk was considered free; the inner contour of the saw disk – elastically fixed with a certain stiffness coefficient. The solution was implemented in the Maple 15 mathematical environment in the form of a developed program. According to the obtained frequency equation, the values of cyclic and natural frequencies of transverse oscillations of circular saw disks of different thicknesses with the same radius of the inner contour and three values of the radii of the outer contour were determined: 150 mm, 200 m, and 250 mm. The effect of the rigidity of the internal contour fixing and the angular speed of rotation of the saw blade on the natural frequencies of transverse oscillations was studied. The study was performed for saw disks in the case of oscillations with one, two, and three nodal diameters. It was established that the rigidity of the internal contour of the saw blade has the greatest influence on the natural frequency of transverse oscillations with one nodal diameter
- Open Access
- 7 July 2023
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 29,p. 243-245
ДО ВИКОРИСТАННЯ МАТЕМАТИЧНОЇ СТАТИСТИКИ ДЛЯ ПРОГНОЗУВАННЯ РИЗИКІВ ІНФОРМАЦІЙНОЇ БЕЗПЕКИ
У сучасному світі відбувається інтенсивний розвиток інформаційних технологій, який зумовлює велику увагу до інформаційної безпеки основних сфер життєдіяльності таких як: економіка, наука, управління, військова справа та ін., стосовно небезпечних інформаційних впливів.
- 7 July 2023
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 29,p. 243-245
Open AccessДО ВИКОРИСТАННЯ МАТЕМАТИЧНОЇ СТАТИСТИКИ ДЛЯ ПРОГНОЗУВАННЯ РИЗИКІВ ІНФОРМАЦІЙНОЇ БЕЗПЕКИ
У сучасному світі відбувається інтенсивний розвиток інформаційних технологій, який зумовлює велику увагу до інформаційної безпеки основних сфер життєдіяльності таких як: економіка, наука, управління, військова справа та ін., стосовно небезпечних інформаційних впливів.
- Open Access
- 1 January 2023
- Published by Sumy State University in Journal of Engineering Sciences
- Vol. 10 (2) , A34-A42
The Distribution Pattern of Machining Errors on Woodworking Machine Tools
The article aims to develop a methodology for calculating and predicting the distribution patterns of wood machining errors to assess the operating conditions of the machine tool according to the technological accuracy criterion. It was analytically proven and experimentally confirmed that Weibull’s law accurately describes the distribution pattern of machining errors on woodworking machines. Based on the results of experimental studies of the accuracy of machining on machines for lengthwise sawing and plano-milling of wood, it was found that the primary indicator of the Weibull distribution law is a shape parameter that takes values within 1.89–3.11. The computational algorithm was developed for statistical modeling of the pattern of the distribution of machining errors according to the Weibull distribution law. It allows for determining the main parameters of the error distribution law and evaluating the operating conditions for the machine tool according to the technological accuracy criterion. The statistical modeling results for the distribution pattern of machining errors are correlated with the experimental data with an accuracy of up to 5 %, which confirms the reliability of the obtained simulation results. The developed approach also minimizes the restoration cost for the machine’s operability.
- 1 January 2023
- Published by Sumy State University in Journal of Engineering Sciences
- Vol. 10 (2) , A34-A42
Open AccessThe Distribution Pattern of Machining Errors on Woodworking Machine Tools
The article aims to develop a methodology for calculating and predicting the distribution patterns of wood machining errors to assess the operating conditions of the machine tool according to the technological accuracy criterion. It was analytically proven and experimentally confirmed that Weibull’s law accurately describes the distribution pattern of machining errors on woodworking machines. Based on the results of experimental studies of the accuracy of machining on machines for lengthwise sawing and plano-milling of wood, it was found that the primary indicator of the Weibull distribution law is a shape parameter that takes values within 1.89–3.11. The computational algorithm was developed for statistical modeling of the pattern of the distribution of machining errors according to the Weibull distribution law. It allows for determining the main parameters of the error distribution law and evaluating the operating conditions for the machine tool according to the technological accuracy criterion. The statistical modeling results for the distribution pattern of machining errors are correlated with the experimental data with an accuracy of up to 5 %, which confirms the reliability of the obtained simulation results. The developed approach also minimizes the restoration cost for the machine’s operability.
- Open Access
- 30 December 2022
- Published by Lviv State University of Life Safety in Bulletin of Lviv State University of Life Safety
- Vol. 26, 47-54
ОЦІНЮВАННЯ РИЗИКІВ ІНФОРМАЦІЙНОЇ БЕЗПЕКИ З ВИКОРИСТАННЯМ МЕТОДІВ МАТЕМАТИЧНОЇ СТАТИСТИКИ
Анотація. Інформаційна безпека підприємств для забезпечення конфіденційності, цілісності та доступності інформації є невід’ємною частиною успішної бізнес-діяльності. Результатом реалізації ризиків у сфері інформаційної безпеки для підприємств малого та середнього бізнесу може бути припинення або уповільнення бізнес процесів, втрата конкурентної переваги, збиток для бренду та втрата репутації, судові розгляди та позови.Також збиток підприємства може полягати у втраті клієнтів та прибутку, зниженні вартості бізнесу, витрат на усунення наслідків, штрафи та санкції регулюючих органів. Для організацій та підприємств малого та середнього бізнесу проблеми оцінювання та управління ризиками інформаційної безпеки є надзвичайно актуальними. Тому метою роботи є моделювання інформаційних ризиків підприємства малого бізнесу на підставі порівняння загроз та вразливостей для його інформаційної безпеки з використанням елементів SWOT-аналізу. Для досягнення мети розроблено перелік запитань стосовно загроз та вразливостей інформаційної безпеки підприємства для проведення інтерв’ю з експертами. Перелік загроз містив сім позицій: зовнішні атаки на інформаційні активи підприємства, навмисну некоректну експлуатацію, крадіжки бізнес-інформації, збої в роботі, порушення надання послуг унаслідок стихійних лих, ненавмисну неправильну експлуатацію та непередбачені наслідки від змін. До переліку шести вразливостей включено відсутності системи аварійного електропостачання, відсутність системи регулярного резервного копіювання; двофакторної автентифікації; плинність кадрів (часта зміна персоналу); недостатній рівень фахової підготовки користувачів; ненавмисний витік бізнес-інформації. Узгодженість думок експертів стосовно загроз та вразливостей оцінено коефіцієнтом конкордації Кендалла. Результати експертних оцінок інформаційної безпеки опрацьовано методом попарних порівнянь. Ітераційний алгоритм цього методу реалізовано в середовищі Excel. На підставі векторів коефіцієнтів відносної важливості загроз та коефіцієнтів відносної важливості вразливостей побудовано порівняльну матрицю загроз та вразливостей для підприємства.Матриця загроз та вразливостей є підгрунттям для прийняття управлінських рішень на підприємстві.
- 30 December 2022
- Published by Lviv State University of Life Safety in Bulletin of Lviv State University of Life Safety
- Vol. 26, 47-54
Open AccessОЦІНЮВАННЯ РИЗИКІВ ІНФОРМАЦІЙНОЇ БЕЗПЕКИ З ВИКОРИСТАННЯМ МЕТОДІВ МАТЕМАТИЧНОЇ СТАТИСТИКИ
Анотація. Інформаційна безпека підприємств для забезпечення конфіденційності, цілісності та доступності інформації є невід’ємною частиною успішної бізнес-діяльності. Результатом реалізації ризиків у сфері інформаційної безпеки для підприємств малого та середнього бізнесу може бути припинення або уповільнення бізнес процесів, втрата конкурентної переваги, збиток для бренду та втрата репутації, судові розгляди та позови.Також збиток підприємства може полягати у втраті клієнтів та прибутку, зниженні вартості бізнесу, витрат на усунення наслідків, штрафи та санкції регулюючих органів. Для організацій та підприємств малого та середнього бізнесу проблеми оцінювання та управління ризиками інформаційної безпеки є надзвичайно актуальними. Тому метою роботи є моделювання інформаційних ризиків підприємства малого бізнесу на підставі порівняння загроз та вразливостей для його інформаційної безпеки з використанням елементів SWOT-аналізу. Для досягнення мети розроблено перелік запитань стосовно загроз та вразливостей інформаційної безпеки підприємства для проведення інтерв’ю з експертами. Перелік загроз містив сім позицій: зовнішні атаки на інформаційні активи підприємства, навмисну некоректну експлуатацію, крадіжки бізнес-інформації, збої в роботі, порушення надання послуг унаслідок стихійних лих, ненавмисну неправильну експлуатацію та непередбачені наслідки від змін. До переліку шести вразливостей включено відсутності системи аварійного електропостачання, відсутність системи регулярного резервного копіювання; двофакторної автентифікації; плинність кадрів (часта зміна персоналу); недостатній рівень фахової підготовки користувачів; ненавмисний витік бізнес-інформації. Узгодженість думок експертів стосовно загроз та вразливостей оцінено коефіцієнтом конкордації Кендалла. Результати експертних оцінок інформаційної безпеки опрацьовано методом попарних порівнянь. Ітераційний алгоритм цього методу реалізовано в середовищі Excel. На підставі векторів коефіцієнтів відносної важливості загроз та коефіцієнтів відносної важливості вразливостей побудовано порівняльну матрицю загроз та вразливостей для підприємства.Матриця загроз та вразливостей є підгрунттям для прийняття управлінських рішень на підприємстві.