VTValentyna Tkachenko

Valentyna Tkachenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Valentyna Tkachenko has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Environmental impact assessment in the design and restoration of bridge crossings

    by Mykola Boriatynskyi, Valentyna Tkachenko, Viktoriia Khrutba

    The restoration of bridge crossings under conditions of large-scale wartime destruction of Ukraine’s transport infrastructure raises pressing questions about the quality of environmental management in design — in particular, the completeness and effectiveness of the environmental impact assessment procedure. At the same time, the regulatory framework governing EIA for bridge crossings, as transport infrastructure objects with significant potential environmental impacts, has not previously been the subject of systematic comparative analysis. To fill this gap, 14 elements of the EIA procedure under Directive 2011/92/EU (as amended by 2014/52/EU) were compared with the corresponding provisions of Ukrainian Law No. 2059-VIII of 23.05.2017 (as amended on 15.11.2024). Compliance was established for 6 procedural elements and partial compliance for 8; no element was found to be entirely absent from Ukrainian law. The most significant regulatory gaps concern the screening of bridge crossings as a distinct object category, the analysis of alternatives, post-decision monitoring, and the legal regulation of EIA under conditions of accelerated wartime restoration. Verification of results against an EIA report for a bridge crossing over the Prut River (Kolomyia district), published in the national EIA registry, confirmed that the identified regulatory gaps manifest in the preparation of real project documentation and may affect the completeness of environmental assessment.

  • System model for the formation of organizational and technical processes for the prevention of emergency situations in transport complex projects

    by Olena Sorochynska, Oleksandr Melnichenko, Ivan Kulbovskyi, Valentyna Tkachenko

    The article explores the current challenges related to occupational safety in the transport sector of Ukraine, emphasizing the growing importance of systematic prevention and effective risk management. The study analyzes the main causes of occupational injuries and emergencies, highlighting both technical and organizational shortcomings in existing safety management systems. Particular attention is given to the insufficient implementation of modern risk-oriented approaches and the limited integration of advanced organizational and technical solutions at transport enterprises. The authors substantiate the need to transform traditional occupational safety practices by adopting international standards, such as ISO 45001 and ISO 31010, and by strengthening digitalization processes that enable real-time monitoring of hazards. Based on the results of the analysis, a comprehensive model is proposed for forming organizational and technical prerequisites that aim to reduce injury rates, enhance the efficiency of preventive actions, and improve the reliability of production processes. The model integrates key components such as hazard identification, risk assessment, digital monitoring systems, personnel training, modernization of equipment, and development of a corporate safety culture. It also provides mechanisms for coordinating management decisions, improving regulatory and methodological support, and implementing preventive programs tailored to the specifics of the transport industry. The findings demonstrate that using a systemic approach, supported by digital technologies and analytical tools, significantly strengthens the ability of enterprises to predict and prevent dangerous events. The proposed model can serve as a practical foundation for improving occupational safety management systems, supporting the development of industry programs, and ensuring sustainable and safe functioning of the transport sector.

  • Open Access

    Modeling an Image Clustering Algorithm For Detecting Overheated Railway Axle

    by National Transport University, Oleksandr Gertsiy, Serhii Karnatov, Vitaliy Gladish, Valentyna Tkachenko

    This paper presents an approach to image identification based on a clustering algorithm for detecting the thermal characteristics of railway axle boxes. The study analyzes the potential of clustering algorithms in the task of digital image identification. The principles of the proposed algorithm are described in the context of image segmentation and compression, as well as pattern recognition in the transportation domain. A block diagram of the algorithm is provided along with an explanation of its operational principles. A scheme for implementing a machine vision system using the proposed algorithm is suggested for the detection of overheated axle boxes in railway transport. Experimental modeling was conducted for image segmentation based on color models in the infrared spectrum to identify regions with elevated temperatures in the MATLAB environment. For the experiment, thermal images of rolling stock axle boxes were selected one representing a normal condition and the other representing an overheated condition. The simulation results demonstrated that segmentation based on image color models allows for accurate delineation of the thermal characteristics of axle box images. The study confirmed that the use of the proposed algorithm and its software implementation for thermographic cameras is effective for recognizing temperature indicators. Additionally, the algorithm enables image compression, which increases data processing speed and facilitates the monitoring of thermal characteristics of rolling stock at high speeds.

  • Ecologization and sustainable development as one of the vectors of tourism and hotel industry functioning

    by K. D. Dodilova, V. V. Poluda, V. A. Tkachenko

    The purpose of the article is to study the environmental impact of tourism and hospitality on tourist destinations, local communities and the environment. Reducing the negative impact of the development of the tourism and hospitality sector is possible only under conditions of sustainable development, which involves the rational use of natural resources, combined with the maintenance of the socio-cultural authenticity of tourist destinations and local communities, ensuring the sustainable development of economic processes and taking into account the interests of all stakeholders. Research methods and methodology. The research methodology is based on the application of methods of scientific knowledge such as analysis, synthesis, systematic method, method of comparison and analogy. Scientific novelty. This article reveals the peculiarities of the impact of all interacting parties of the tourism and hospitality sector: tourists, recreation organizers, hotels, staff of tourism and hotel enterprises, cruise companies, etc. on the environment, and also analyzes approaches to minimizing these impacts. The results of the study. Despite the active introduction of the concept of sustainable development, its implementation faces a number of significant obstacles. In particular, the main problems include inertia in thinking, insufficient awareness, and the focus of government, citizens, and businesses on short-term goals, which often contradicts declared political intentions. In many countries, strategic approaches to development are not sufficiently focused on preserving natural capital. State policy in the field of sustainable development is often characterized by inconsistency, which significantly reduces its effectiveness. In addition, the introduction of environmentally friendly technologies requires significant financial resources, as they remain expensive for widespread use. Оf the use of environmental practices and technologies investigated in this article can serve as a basis for ensuring the sustainable development of tourism and the hotel industry in tourist destinations.

  • Environmental Impact Assessment During the Construction and Reconstruction of Bridge Crossings Using the Analytical Hierarchy Method

    by Nataliia Kharytonova, Lesia Kriukovska, Olesia Yaroshchuk, Mykola Boriatynskyi, Valentyna Tkachenko

  • Open Access

    Development of a diagnostic system for the presence of rotor eccentricity in traction induction motors

    by Victor Yurchenko, Olena Nezlina, Valentyna Tkachenko

    The aim of research is to develop a system for functional diagnostics of the presence of rotor eccentricity in traction induction motors of railway rolling stock. To achieve the aim, the following objectives were solved in the work: the Prony’s method was adapted to perform the task of diagnosing the eccentricity of the rotor of an induction motor during the operation of the rolling stock; the algorithm of functioning of the system of functional diagnosis of rotor eccentricity based on the adapted Prony’s method is proposed; a structural diagram of the rotor eccentricity diagnosis unit based on the adapted Prony’s method is proposed; a structural diagram of the system of functional diagnosis of rotor eccentricity is proposed. The most important results are obtaining a mathematical model of the Prony’s method, adapted to the task of diagnosing the eccentricity of the rotor of an induction motor during the operation of rolling stock. The adaptation of the Prony’s method algorithm is performed by applying the Wiener-Hopf procedure to the analyzed signals. This will make it possible to apply the proposed algorithm in conditions where the process of changing the analyzed signals is stochastic in nature. This will make it possible to determine the eccentricity degree of the AM rotor with greater accuracy and to make a more correct decision regarding the AM operation with the existing eccentricity of the rotor. Key words: induction motor, diagnosis, eccentricity, rolling stock.

  • Open Access

    Assessment of the stressed-strained state of a reinforced transport pipe under the combined effect of ambient temperature and static loads

    by Vitalii Kovalchuk, Roman Rybak, Yuriy Hnativ, Valentyna Tkachenko, Artur Onyshchenko, Ivan Kravets, Yuliia Hermaniuk, Mykola Babyak, Nataliya Hembara, Ihor Velhan

    The object of this study is a reinforced three-layer transport pipe, which is subjected to the joint action of ambient temperature and static loading of the road subgrade soil. The analytical model for assessing the stressed-strained state of reinforced three-layer pipes, under the combined action of temperature and static loads, has been improved using the theory of elasticity. The stressed-strained state of the reinforced pipe was assessed taking into account the values of the joint action of temperature and loads from vehicles, the physical and mechanical parameters of structural materials, and the geometric parameters of the pipe. As a result of the calculation of the reinforced multilayer pipe, it was found that the maximum movements that occur on the outside of the defective pipe are 0.64 mm, the metal pipe – 0.75 mm, and in the concrete mortar (fine-grained concrete) – 0.69 mm. It was established that under the combined action of ambient temperature and static loads from the road subgrade soil, ring stresses are maximum. They are 151 MPa. Axial stresses are also high – 141 MPa. At the same time, the maximum radial stresses are the smallest – 37.4 MPa. It has been established that a small difference in displacements occurs on the contact of structural materials of the reinforced pipe. However, the magnitude of the stresses is high. The maximum difference in ring stresses was 73 MPa, while the difference in radial and axial stresses was up to 1.0 MPa. It has been established that to restore the bearing capacity of damaged reinforced concrete pipes, it is possible to use the repair technology by the method of "sleeving". It involves pulling a metal pipe into the middle of the layer damaged with concrete mortar remaining between the concrete defective and the new metal pipes.


  • Open Access

    Development of a method to improve the reliability of assessing the condition of the monitoring object in special-purpose information systems

    by Oleg Sova, Hryhorii Radzivilov, Andrii Shyshatskyi, Pavel Shvets, Valentyna Tkachenko, Serhii Nevhad, Oleksandr Zhuk, Serhii Kravchenko, Bohdan Molodetskyi, Hennadii Miahkykh

    The peculiarities of modern military conflicts significantly increase the requirements for the efficiency of object state assessment. Therefore, it is necessary to develop algorithms (methods and techniques) that can assess the state of the monitoring object from different sources of intelligence for a limited time and with a high degree of reliability. Accurate and objective object analysis requires multi-parameter estimation with significant computational costs. That is why the following tasks were solved in the study: the formalization of the assessment of monitoring objects was carried out, a method of increasing the efficiency of assessing the condition of monitoring objects was developed and an efficiency assessment was carried out. The essence of the proposed method is the hierarchical hybridization of binary classifiers and their subsequent training. The method has the following sequence of actions: determining the degree of uncertainty, constructing a classifier tree, determining belonging to a particular class, determining object parameters, pre-processing data about the object of analysis and hierarchical traversal of the tree. The novelty of the method lies in taking into account the type of uncertainty and noise of the data and taking into account the available computing resources of the object state analysis system. The novelty of the method also lies in the use of combined training procedures (lazy training and training procedure for evolving neural networks) and selective use of system resources by connecting only the necessary types of detectors. The method allows you to build a top-level classifier using various low-level schemes for combining them and aggregating compositions. The method increases the efficiency of data processing by 12–20 % using additional advanced procedures


  • Open Access

    Implementation of communication and interaction management in distributed environmental projects

    by Andrii Khrutba, Victor Morozov, Yuliia Khrutba, Valentyna Tkachenko, Roksolana Lysak

    The object of research is the management of communication processes that occur between different stakeholders in project activities in the implementation of distributed environmental projects. The research is based on the application of the basic provisions of communication management in project management methodologies, including Green Project Management used to study the features and factors influencing individual processes in distributed environmental projects. The paper also applies the current provisions, methodological approaches to set theory and systems analysis (to formalize management processes, development of system models); classical and applied project management standards; expert evaluation methods for quantitative evaluation of criteria; methods of mathematical modeling, etc. The information base of the research is statistical data on the implementation of projects, the results of own research. The main hypothesis of the study is the assumption that a significant impact on the outcome of the implementation of distributed environmental projects is determined by the successful management of communications between stakeholders in the development and implementation of the project. Because the formation of an effective communication management mechanism in distributed environmental projects ensures the receipt of the project product with minimal risks. The interrelation of management of communications and interactions in the distributed projects and features of application of the concept of Green Project Management for management of nature protection projects is shown. Peculiarities of interaction management in distributed environmental projects are analyzed. The method of interaction management in nature distribution distributed projects is offered. The method of creation of a communication platform for realization of the coordinated management of communications in the distributed projects is offered. With the help of the method it is possible to coordinate the planned actions of the project participants on a set of compromise and related solutions to implement the tasks that are the best results of the project in accordance with the functions for benefits. It is shown to increase the efficiency of the interaction management process in distributed environmental projects to ensure effective communication in the interaction of stakeholders in distributed environmental projects under the condition of unclear information about the real state of the level of achievement of stakeholder expectations.


  • Open Access

    COMMUNICATION MODEL OF RELATIONSHIP BETWEEN STAKEHOLDERS IN EDUCATIONAL INNOVATIVE SCIENTIFIC PROJECTS

    by Olexandr Melnychenko, Iryna Lebid, Valentyna Tkachenko, Nataliia Luzhanska

    A project approach is used to address issues of improving educational processes. Implementation of educational innovative research projects is effective with the participation of a large number of stakeholders. Stakeholders include representatives of the state, business and community. The formation of common values, which are focused on quality education, for all groups of stakeholders will help to effectively implement educational innovative research projects. To do this, you need to create an appropriate communication model. Project communications consist of the processes of timely collection, dissemination, storage, receipt and use of information. One of the responsibilities of the project manager is to create a kind of intellectual space for the project stakeholders to discuss common tasks, goals and areas of interest. The purpose of communications management is to meet communication needs of project participants and solve communication problems in case of their occurrence. The success of a project depends on how different project team members and stakeholders interact with each other. With this end in view, a model of the relationship between stakeholders in educational projects was created; this model makes it possible to manage different types of communication (formal and informal). The results of the study were used to manage communications in the implementation of educational innovative research projects at National Transport University (NTU) while carrying out the international TEMPUS project ‘Fostering the Knowledge Triangle in Belarus, Ukraine and Moldova’. The results of the project show that the efficiency of communications between NTU and international partners is 0.5 - 1.0, which indicates that the result of the educational innovative research project is good after the communication process. Thus, the developed model of communications management in educational innovative research projects allows determining the set of input and output parameters, constraints, control and uncontrolled variables in communication processes and is the basis for the management of formal and informal communication.