Lu-Qing Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lu-Qing Wang has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Honghao Ma
School of Engineering Science, University of Science and Technology of China, Hefei 230026, China
8 shared publications Hong-Hao Ma
University of Science and Technology of China
5 shared publicationsH.-H. Ma
Department of Modern Mechanics, University of Science and Technology of China, Hefei, People’s Republic of China
3 shared publications- Yibo Ge
CAS Key Laboratory of Mechanical Behavior and Design of Materials (LMBD), Department of Modern Mechanics, University of Science and Technology of China, Hefei, People’s Republic of China
2 shared publications Yun Ge
2 shared publicationsZe He
Key Laboratory of Mechanical Behavior and Design of Materials, Chinese Academy of Sciences, University of Science and Technology of China , Hefei 230026, China
2 shared publications
Latest Publications
- 7 July 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1038, A19
Mach reflection of a detonation wave over a concave double wedge
In this study, the Mach reflection of a detonation wave in 2H Subscript 2 $_2$ + O Subscript 2 $_2$ + 2Ar over a concave double wedge was experimentally investigated. Three Mach reflection configurations could be observed successively, namely, Mach reflection of a Chapman–Jouguet detonation over the first surface, Mach reflection of an overdriven detonation wave over the second surface, and Mach reflection after the interaction of two triple points. The experimental results indicated that the classical reactive theories based on the straight Mach stem assumption are unable to accurately predict the behaviours of the latter two Mach reflections. The asymptotic triple-point trajectory angle of the secondary Mach reflection, chi 2 $\chi _2$ , is significantly smaller than the theoretical prediction. A curved model for the Mach stem m 1 $m_1$ is constructed, introducing a curved Mach stem near the triple point. The Mach stem has a concave curvature, implying a lower overdrive degree and a smaller incident angle, which consequently leads to a reduction in chi 2 $\chi _2$ . Based on the curved Mach stem model, an equivalent wedge angle upper Phi $\varPhi$ and an equivalent overdrive degree alpha overbar $\overline {\alpha }$ are introduced to predict the value of chi 2 $\chi _2$ . An analytical model for solving the interaction of two triple points was developed. Two different wave structures after the interaction – namely, downward-travelling shock–shock and downward-travelling centred shock–expansion – were determined using gas dynamic and shock dynamic methods. The curved Mach stem m 1 $m_1$ can result in the variation of the wave structure.- 7 July 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1038, A19
Mach reflection of a detonation wave over a concave double wedge
In this study, the Mach reflection of a detonation wave in 2H Subscript 2 $_2$ + O Subscript 2 $_2$ + 2Ar over a concave double wedge was experimentally investigated. Three Mach reflection configurations could be observed successively, namely, Mach reflection of a Chapman–Jouguet detonation over the first surface, Mach reflection of an overdriven detonation wave over the second surface, and Mach reflection after the interaction of two triple points. The experimental results indicated that the classical reactive theories based on the straight Mach stem assumption are unable to accurately predict the behaviours of the latter two Mach reflections. The asymptotic triple-point trajectory angle of the secondary Mach reflection, chi 2 $\chi _2$ , is significantly smaller than the theoretical prediction. A curved model for the Mach stem m 1 $m_1$ is constructed, introducing a curved Mach stem near the triple point. The Mach stem has a concave curvature, implying a lower overdrive degree and a smaller incident angle, which consequently leads to a reduction in chi 2 $\chi _2$ . Based on the curved Mach stem model, an equivalent wedge angle upper Phi $\varPhi$ and an equivalent overdrive degree alpha overbar $\overline {\alpha }$ are introduced to predict the value of chi 2 $\chi _2$ . An analytical model for solving the interaction of two triple points was developed. Two different wave structures after the interaction – namely, downward-travelling shock–shock and downward-travelling centred shock–expansion – were determined using gas dynamic and shock dynamic methods. The curved Mach stem m 1 $m_1$ can result in the variation of the wave structure.- 12 February 2026
- Published by Springer Nature in Shock Waves
- Vol. 36 (1) , 1
A novel method for rock blasting using biomass waste
- 12 February 2026
- Published by Springer Nature in Shock Waves
- Vol. 36 (1) , 1
A novel method for rock blasting using biomass waste
- 16 December 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 202
Combustion characteristics of NH3/CH4/Air/N2 and NH3/DME/Air/N2 at flammability limits
- 16 December 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 202
Combustion characteristics of NH3/CH4/Air/N2 and NH3/DME/Air/N2 at flammability limits
- Open Access
- 16 October 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (15)
The pulsation characteristics of bubble in deep water environments within limited water area
The effect of hydrostatic pressure on bubble dynamics parameters was analyzed through a combination of experimental and numerical simulation methods in this paper. Under four operating conditions with initial pressures of 0.1, 0.25, 0.3, and 0.5 MPa, a high-speed camera was used to capture the underwater explosion bubble pulsation process of 0.3 g of Pentaerythritol Tetranitrate (PETN). The bubble pulsation process of the underwater explosion of 0.3 g of PETN was simulated with initial pressures ranging from 0.1 to 30 MPa using LS-DYNA software. Based on the simulation results, the variation patterns of (bubble pulsation period, maximum bubble radius, specific bubble energy, influence of a fixed planar boundary on bubble migration, and peak bubble pulsation overpressure) with hydrostatic pressure were obtained. The simulation results indicate that both the maximum bubble pulsation radius and pulsation period exhibited significant decreases as hydrostatic pressure increased, with measured decay coefficients of −0.361 and −0.817, respectively. The specific bubble energy and the overpressure peak of the bubble pulsation increased with increasing hydrostatic pressure, and the growth rate was faster within 1 MPa. When the initial pressure was 3.650–3.675 MPa, the bubble center remained stationary, with γ ranging from 10.82 to 10.86.
- 16 October 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (15)
Open AccessThe pulsation characteristics of bubble in deep water environments within limited water area
The effect of hydrostatic pressure on bubble dynamics parameters was analyzed through a combination of experimental and numerical simulation methods in this paper. Under four operating conditions with initial pressures of 0.1, 0.25, 0.3, and 0.5 MPa, a high-speed camera was used to capture the underwater explosion bubble pulsation process of 0.3 g of Pentaerythritol Tetranitrate (PETN). The bubble pulsation process of the underwater explosion of 0.3 g of PETN was simulated with initial pressures ranging from 0.1 to 30 MPa using LS-DYNA software. Based on the simulation results, the variation patterns of (bubble pulsation period, maximum bubble radius, specific bubble energy, influence of a fixed planar boundary on bubble migration, and peak bubble pulsation overpressure) with hydrostatic pressure were obtained. The simulation results indicate that both the maximum bubble pulsation radius and pulsation period exhibited significant decreases as hydrostatic pressure increased, with measured decay coefficients of −0.361 and −0.817, respectively. The specific bubble energy and the overpressure peak of the bubble pulsation increased with increasing hydrostatic pressure, and the growth rate was faster within 1 MPa. When the initial pressure was 3.650–3.675 MPa, the bubble center remained stationary, with γ ranging from 10.82 to 10.86.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Quasi-detonation reflection over cylindrical wedges
Quasi-detonation reflections over concave and convex wedges were experimentally investigated in a narrow channel. Experiments were conducted in a 110 × 15 mm2 cross-sectional channel filled with stoichiometric hydrogen–oxygen diluted with 40% argon. A porous nickel plate was used as the “velocity deficit promotor” to generate quasi-detonations. Soot foils were applied to record the evolution of the reflection behaviors, while pressure sensors monitored wave velocity. The common feature of the reflective structures is that the height of the Mach stem decreases with increased αi (αi is the overdrive degree of the incident wave). For concave wedges, the Mach Reflection (MR) terminates earlier with higher αi, with the triple-point trajectory lying between the inert Chester–Chisnell–Whitham (CCW) theory and the reactive CCW theory. Meanwhile, the critical wall angle is found to be decreased with αi, particularly at a larger effective radius (R). In the case of convex wedges, the MR appears earlier with higher αi, resulting in an increased critical wall angle. Finally, for detonation waves exhibiting velocity deficits on both cylindrical wedges, the dispersion of the critical wall angle is significantly reduced at high αi. The critical wall angle on the concave wedge asymptotically converges toward the predictions of reactive CCW theory as the αi increases, while that on the convex wedge gradually converges to the prediction of two-shock theory.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Quasi-detonation reflection over cylindrical wedges
Quasi-detonation reflections over concave and convex wedges were experimentally investigated in a narrow channel. Experiments were conducted in a 110 × 15 mm2 cross-sectional channel filled with stoichiometric hydrogen–oxygen diluted with 40% argon. A porous nickel plate was used as the “velocity deficit promotor” to generate quasi-detonations. Soot foils were applied to record the evolution of the reflection behaviors, while pressure sensors monitored wave velocity. The common feature of the reflective structures is that the height of the Mach stem decreases with increased αi (αi is the overdrive degree of the incident wave). For concave wedges, the Mach Reflection (MR) terminates earlier with higher αi, with the triple-point trajectory lying between the inert Chester–Chisnell–Whitham (CCW) theory and the reactive CCW theory. Meanwhile, the critical wall angle is found to be decreased with αi, particularly at a larger effective radius (R). In the case of convex wedges, the MR appears earlier with higher αi, resulting in an increased critical wall angle. Finally, for detonation waves exhibiting velocity deficits on both cylindrical wedges, the dispersion of the critical wall angle is significantly reduced at high αi. The critical wall angle on the concave wedge asymptotically converges toward the predictions of reactive CCW theory as the αi increases, while that on the convex wedge gradually converges to the prediction of two-shock theory.
- 4 July 2025
- Published by Wiley in Process Safety Progress
- Vol. 44 (3) , 514-519
Can a baffle improve the efficiency of crimped ribbon flame arrestor: A case study
Tests were performed to determine if a baffle would improve the efficiency of a crimped ribbon flame arrestor in a circular tube (150 mm inner diameter) with a flammable ethylene‐oxygen‐air mixture. The pressure drops and flameproof velocity of a crimped ribbon flame arrestor with and without an expansion cavity baffle were measured. The results show that the flow resistance increases and the flameproof velocity decreases with a baffle. An expansion cavity baffle therefore fails to improve the efficiency of a crimped ribbon flame arrestor.
- 4 July 2025
- Published by Wiley in Process Safety Progress
- Vol. 44 (3) , 514-519
Can a baffle improve the efficiency of crimped ribbon flame arrestor: A case study
Tests were performed to determine if a baffle would improve the efficiency of a crimped ribbon flame arrestor in a circular tube (150 mm inner diameter) with a flammable ethylene‐oxygen‐air mixture. The pressure drops and flameproof velocity of a crimped ribbon flame arrestor with and without an expansion cavity baffle were measured. The results show that the flow resistance increases and the flameproof velocity decreases with a baffle. An expansion cavity baffle therefore fails to improve the efficiency of a crimped ribbon flame arrestor.
- 6 March 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 113, 761-776
Laminar burning velocities of hydrogen-propane-nitrous oxide premixed flames: Experimental study and kinetic analysis
- 6 March 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 113, 761-776
Laminar burning velocities of hydrogen-propane-nitrous oxide premixed flames: Experimental study and kinetic analysis
- 1 October 2024
- Published by Springer Nature in Shock Waves
- Vol. 34 (6) , 555-567
Detonation behaviors in a curved tube with and without an obstacle
- 1 October 2024
- Published by Springer Nature in Shock Waves
- Vol. 34 (6) , 555-567
Detonation behaviors in a curved tube with and without an obstacle
- 21 June 2024
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 49 (8)
Numerical simulation and optimized design of a launching system with a novel charge structure
In this paper, a launching system with a novel charge structure was proposed to improve the interior ballistic performance. According to the working characteristics of the novel launching system, a lumped‐parameter model was established. The parameters of the propellant and the interior ballistic characteristics of the launching system were obtained by experiments. According to the experimental results, the accuracy of the lumped‐parameter model was verified by code. The simulated results were in good agreement with the experimental results. Based on the lumped‐parameter model, the propellant parameters, such as the impetus, the burning rate, the web thickness, and the charge mass, were investigated to understand the interior ballistic performances of the launching system. An optimization method was proposed to design the propellant parameters of the launching system. The results show that the optimal scheme can increase the velocity of the projectile by 9.54 %. Compared with the traditional launching method, the velocity of the projectile is increased by 37.09 % while the peak pressure in the barrel has no change.
- 21 June 2024
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 49 (8)
Numerical simulation and optimized design of a launching system with a novel charge structure
In this paper, a launching system with a novel charge structure was proposed to improve the interior ballistic performance. According to the working characteristics of the novel launching system, a lumped‐parameter model was established. The parameters of the propellant and the interior ballistic characteristics of the launching system were obtained by experiments. According to the experimental results, the accuracy of the lumped‐parameter model was verified by code. The simulated results were in good agreement with the experimental results. Based on the lumped‐parameter model, the propellant parameters, such as the impetus, the burning rate, the web thickness, and the charge mass, were investigated to understand the interior ballistic performances of the launching system. An optimization method was proposed to design the propellant parameters of the launching system. The results show that the optimal scheme can increase the velocity of the projectile by 9.54 %. Compared with the traditional launching method, the velocity of the projectile is increased by 37.09 % while the peak pressure in the barrel has no change.
- 30 May 2024
- Published by Springer Nature in Shock Waves
- Vol. 34 (3) , 285-289
Detonation wave reflection over a concave–convex cylindrical wedge
- 30 May 2024
- Published by Springer Nature in Shock Waves
- Vol. 34 (3) , 285-289
Detonation wave reflection over a concave–convex cylindrical wedge