Shuiqing Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shuiqing Zhou has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Ding Xia
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China
1 shared publication Ke Yang
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, China
1 shared publicationLaifa Lu
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, China
1 shared publication- Qizhi Yang
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China
1 shared publication - Weitao Zhang
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China
1 shared publication Yinjie Hu
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, China
1 shared publication
Latest Publications
- Open Access
- 4 March 2022
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 10
IGV Optimization for a Large Axial Flow Fan Based on MRGP Model and Sobol’ Method
Large axial flow fans with inlet guide vanes (IGVs) have been widely used in building ventilation systems. However, it does not readily satisfy the increasing demand for energy saving, high efficiency, or noise reduction. The rotor-stator interaction between the IGVs and the impeller is particularly important for the aerodynamic performance and noise of the fans. Therefore, this article takes a large axial fan, combined with parameterization methods to optimize the IGVs. Based on numerical simulation analysis, the multiple-response Gaussian process (MRGP) approximate model was established to optimize the IGVs structure, and the Sobol´ method was employed for sensitivity analysis. The best model was selected for proofing analysis, and the experimental and numerical simulation results show that the total pressure of the optimized fan increased by 144.4 Pa and the noise decreased by 7.2 dB. These results verify that the multi-objective optimization design method combining the MRGP approximate model and the Sobol´ method demonstrates high credibility and provides a key design direction for the design optimization of large axial flow fans. This novel optimization method also has easy-to-understand parameters and the coupling relationships between parameters and responses, which has potential value for the design of other types of fluid machinery and provides new ideas for the optimization of fluid machinery.
- 4 March 2022
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 10
Open AccessIGV Optimization for a Large Axial Flow Fan Based on MRGP Model and Sobol’ Method
Large axial flow fans with inlet guide vanes (IGVs) have been widely used in building ventilation systems. However, it does not readily satisfy the increasing demand for energy saving, high efficiency, or noise reduction. The rotor-stator interaction between the IGVs and the impeller is particularly important for the aerodynamic performance and noise of the fans. Therefore, this article takes a large axial fan, combined with parameterization methods to optimize the IGVs. Based on numerical simulation analysis, the multiple-response Gaussian process (MRGP) approximate model was established to optimize the IGVs structure, and the Sobol´ method was employed for sensitivity analysis. The best model was selected for proofing analysis, and the experimental and numerical simulation results show that the total pressure of the optimized fan increased by 144.4 Pa and the noise decreased by 7.2 dB. These results verify that the multi-objective optimization design method combining the MRGP approximate model and the Sobol´ method demonstrates high credibility and provides a key design direction for the design optimization of large axial flow fans. This novel optimization method also has easy-to-understand parameters and the coupling relationships between parameters and responses, which has potential value for the design of other types of fluid machinery and provides new ideas for the optimization of fluid machinery.
- Open Access
- 22 October 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (21) , 9883
Study of Novel Punched-Bionic Impellers for High Efficiency and Homogeneity in PCM Mixing and Other Solid-Liquid Stirs
Improvement of stirring performance is one of the primary objectives in solid–liquid mixing processes, such as the preparation of phase change materials (PCMs) for energy saving in refrigeration and heat pump systems. In this paper, three novel impellers are proposed: pitched-blade punched turbine (PBPT), bionic cut blade turbine (BCBT) and bionic cut punched blade turbine (BCPBT). An experimental test was conducted to validate the stirring system model based on the Eulerian–Eulerian method with the kinetic theory of granular flow. Then the performance of the novel impellers was predicted, studied, and compared. The outcomes indicate that a novel impeller, specifically BCPBT, can effectively suspend particles and dramatically reduce power consumption. A better solid–liquid suspension quality was obtained with an aperture diameter of 8 mm and aperture ratio of 13%. Within the range of impeller speeds and liquid viscosity studied in this this paper, higher impeller speeds and more viscous liquids are more conducive to particle dispersion. One of the most important contributions of this work lies in the design of novel impellers, an extent of energy conservation to 17% and efficient mixing was achieved. These results have reference significance for improving the energy efficiency of temperature regulation systems.
- 22 October 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (21) , 9883
Open AccessStudy of Novel Punched-Bionic Impellers for High Efficiency and Homogeneity in PCM Mixing and Other Solid-Liquid Stirs
Improvement of stirring performance is one of the primary objectives in solid–liquid mixing processes, such as the preparation of phase change materials (PCMs) for energy saving in refrigeration and heat pump systems. In this paper, three novel impellers are proposed: pitched-blade punched turbine (PBPT), bionic cut blade turbine (BCBT) and bionic cut punched blade turbine (BCPBT). An experimental test was conducted to validate the stirring system model based on the Eulerian–Eulerian method with the kinetic theory of granular flow. Then the performance of the novel impellers was predicted, studied, and compared. The outcomes indicate that a novel impeller, specifically BCPBT, can effectively suspend particles and dramatically reduce power consumption. A better solid–liquid suspension quality was obtained with an aperture diameter of 8 mm and aperture ratio of 13%. Within the range of impeller speeds and liquid viscosity studied in this this paper, higher impeller speeds and more viscous liquids are more conducive to particle dispersion. One of the most important contributions of this work lies in the design of novel impellers, an extent of energy conservation to 17% and efficient mixing was achieved. These results have reference significance for improving the energy efficiency of temperature regulation systems.