VMVinod Morya

Vinod Morya

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Vinod Morya has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Invasive RNA Programs Optical Switching in DNA Nanoclusters for CRISPR Sensing

    by Reggie Gold, Yusha Imtiaz, Vinod Morya, Ken Halvorsen, Emmett Hanson, Mehmet V. Yigit

    DNA-templated silver nanoclusters have regained attention due to recent advances in stability and tunable optical properties. Here, we report a highly regulated DNA-templated silver nanocluster (DFN2) that exhibits strong fluorescence at 561 nm and enables reversible, label-free fluorescence switching governed by nucleic acid hybridization. The fluorescence of DFN2 is efficiently quenched with complementary DNA or RNA and fully restored through invading RNA strand mediated displacement, enabling robust and programmable ON-OFF-ON optical control. We integrated this hybridization-responsive platform with CRISPR-Cas12a to construct a target-activated biosensing system. Upon recognition of a conserved genomic fragment from a foodborne pathogen Listeria monocytogenes, the activated Cas12a cleaves a regulator DNA, initiating a cascade of hybridization and strand-displacement reactions that restore nanocluster fluorescence through an invasive RNA. This strategy exhibits high specificity against conserved genomic regions from other foodborne pathogens. These findings establish DFN2 as programmable, enzyme-responsive optical reporters for rapid, sensitive, and modular point-of-care biosensing.


  • Open Access

    Ligation-assisted target recycling for DNA nanoswitch biosensors

    by Vinod Morya, Andrew Hayden, Mona Zeghal, Jibin Abraham Punnoose, Ken Halvorsen

    Conformationally responsive DNA nanoswitches have previously been developed and validated for a variety of biosensing applications including detection of DNA, microRNA, and viral RNA/DNA. Here we develop new methodology for enhancing the sensitivity of DNA-based sensing by recycling a fixed number of targets for repeated reuse. We achieved target-dependent enzymatic ligation of looped nanoswitches and showed that subsequent removal of target does not affect the ligated loop. Through cyclic annealing, ligation, and target removal, we can linearly control signal amplification up to hundreds of cycles. This method adds an important new capability for low abundance targets without the need for target amplification.

  • Open Access

    A 3D printed mini-gel electrophoresis system for rapid and inexpensive DNA nanoswitch biosensing

    by Vinod Morya, Andrew Hayden, Lifeng Zhou, Dadrian Cole, Ken Halvorsen

    Gel electrophoresis has been a cornerstone laboratory technique for decades, yet it is often viewed as cumbersome, costly, and has remained confined to laboratory settings. Recent advances in DNA nanotechnology have repurposed electrophoresis as a primary readout for some biosensing applications such as DNA nanoswitches, where a conformational change in a DNA structure indicates the presence of a target molecule. Conventional gel electrophoresis setups not ideal for such targeted applications, with moderate equipment cost, excessive reagent use, and time-consuming processes. Here, we adopt a reductionist, application-driven approach to redesign gel electrophoresis specifically for DNA nanoswitch-based detection. We present a fully 3D-printable mini gel electrophoresis system that incorporates conductive plastic electrodes, demonstrating performance comparable to conventional systems using platinum electrodes. By optimizing the inter-electrode distance and running parameters, our system resolves the on/off states of DNA nanoswitches in as little as one minute. We further show that the device operates reliably at low voltages, including when powered by a USB power bank, and even enables instrument-free nanoswitch readout using an LED with a cell-phone camera. Our design substantially reduces the cost, voltage requirements, material usage, operational complexity, and experiment time. These improvements make gel-based biosensing more practical outside traditional laboratory environments, paving the way for broader adoption of gel electrophoresis in point-of-care and resource-limited settings.


  • Open Access

    Machine Learning-Assisted DNA Origami Shape Sorting Using Fingerprinting Nanosensors and Feature Engineering

    by Shubhajit Singha, M. Mikail Demir, Vinod Morya, Ken Halvorsen, M. Abdullah Canbaz, Arun Richard Chandrasekaran, Mehmet V. Yigit

    Reconfigurable DNA nanostructures have emerged as a promising research area with applications in drug delivery, molecular computing, biosensing, and stimuli-responsive soft nanomaterials. While significant progress has been made in creating novel DNA nanostructures and exploring their applications, comparatively little effort has focused on developing new methodologies to confirm their folding. Conventional imaging approaches typically rely on sophisticated microscopy techniques including atomic force and transmission electron microscopy. Alternative low-cost methods for verifying DNA nanostructure assembly and shape sorting are thus highly valuable. Here, we present a fingerprinting nanosensor array integrated with machine learning (ML) to distinguish between two DNA origami shapes (triangle and nanotube) and to differentiate them from an unfolded scaffold strand. The nanosensor array, consisting of 11 nanoassemblies, termed nanosensors, is prepared by complexing graphene oxide nanosheets (nGO) with 11 fluorophore-labeled single-stranded DNA probes. Upon complexation, the fluorescence of the DNA probes is quenched through graphene oxide-mediated fluorescence quenching. Adding the DNA nanostructures to each nanosensor displaced a fraction of the surface-adsorbed fluorescent DNA probes, producing unique fluorescence recovery signatures that were subsequently processed through feature engineering for accurate ML-assisted classification. Using this approach, we achieved 94% prediction accuracy in discriminating DNA origami triangle, DNA origami nanotube, and unassembled M13 scaffold. Our strategy provides a new and generalizable platform for shape sorting in DNA origami field, offering new avenues for high-throughput, label-free classification.


  • A functional 2D MXene–DNA hybrid hydrogel for portable detection of blood disorder biomarker thrombin in human plasma

    by Vinod Morya, Dhiraj Bhatia, Chinmay Ghoroi, Amit K. Yadav

    Delaminated MXenes (2D MXenes) and DNA hydrogels have created enormous opportunities due to their versatility and ability to be tailored for specific applications. 2D MXenes offer high aspect ratio morphology and electrical conductivity, while DNA provides stimuli responsiveness and specificity in binding to ligands or complementary sequences. This synergy makes DNA an ideal actuator when combined with 2D MXenes. The present work makes the first effort to integrate and exploit them for detecting the thrombin levels, a crucial proteolytic enzyme that plays a pivotal role in regulating blood clotting by cleaving fibrinogen into fibrin and plays a critical role in bleeding disorders such as haemophilia and Von Willebrand disease. This study introduces a novel hybrid DNA hydrogel by leveraging the properties of 2D MXenes with a thiol-modified thrombin-binding aptamer (TBA) as a crosslinking agent. The TBA and its complementary DNA oligos are immobilized on 2D MXene sheets, forming a packed hydrogel. Upon thrombin binding, the TBA releases its complementary DNA, resulting in a loosened hydrogel and a change in resistance, which is used as a read-out for thrombin detection. The fabricated sensor demonstrated a high sensitivity of 0.021 [MΩ (mg L−1)]−1 cm−2, with a low limit of detection (LOD) of 0.1698 mg L−1, a resolution of 6.51 mg L−1 and also a wider linear detection range (LDR) of 10–200 mg L−1 with a correlation coefficient (R2) of 0.98, indicating excellent linearity and reliability across the tested range. The concept was successfully demonstrated, achieving a relative standard deviation (RSD) of 8–10% for thrombin detection in artificial samples, indicating excellent performance. This robust technique holds promise for biomedical sensing devices, allowing customization for detecting various target molecules using specific aptamers.


  • Open Access

    Counterions influence the isothermal self-assembly of DNA nanostructures

    by Arlin Rodriguez, Bharath Raj Madhanagopal, Kahini Sarkar, Zohreh Nowzari, Johnsi Mathivanan, Hannah Talbot, Akul Patel, Vinod Morya, Ken Halvorsen, Sweta Vangaveti, et al.

    DNA nanostructures are typically assembled by thermal annealing in buffers containing magnesium. We demonstrate the assembly of DNA nanostructures at constant temperatures ranging from 4° to 50°C in solutions containing different counterions. The choice of counterions and the assembly temperature influence the isothermal assembly of several DNA motifs and designed three-dimensional DNA crystals. Molecular dynamics simulations show more fluctuations of the DNA structure in select monovalent ions (Na + and K + ) compared to divalent ions (Mg 2+ and Ca 2+ ). A key highlight is the successful assembly of DNA motifs in nickel-containing buffer at temperatures below 40°C, otherwise unachievable at higher temperatures or using an annealing protocol. DNA nanostructures isothermally assembled in different ions do not affect the viability of fibroblasts, myoblasts, and myotubes or the immune response in myoblasts. The use of ions other than the typically used magnesium holds key potential in biological and materials science applications that require minimal amounts of magnesium.


  • Open Access

    Tuning the Stability of DNA Tetrahedra with Base Stacking Interactions

    by Jibin Abraham Punnoose, Dadrian Cole, Tristan Melfi, Vinod Morya, Bharath Raj Madhanagopal, Alan A. Chen, Sweta Vangaveti, Arun Richard Chandrasekaran, Ken Halvorsen

    DNA nanotechnology uses the programmable assembly of DNA to create nanoscale objects. Recent work from our laboratory suggested that terminal stacking interactions between adjacent strands could be a design parameter for DNA nanotechnology. Here, we explore that idea by creating DNA tetrahedra with sticky ends containing identical base pairing interactions but different stacking interactions. Testing all 16 stacking combinations, we found that the melting temperature of DNA tetrahedra varied by up to 10 °C from altering a single base stack in the design. We also show that a 4 bp sticky end with weak stacking does not form stable tetrahedra, while strengthening the stacks confers high stability with a 46.8 ± 1.2 °C melting temperature, comparable to that of a 6 bp sticky end with weak stacking (49.7 ± 2.9 °C). The results likely apply to other DNA nanostructures and suggest that stacking interactions play a role in the formation and stability of DNA nanostructures.


  • pH‐Responsive and Reversible A‐Motif‐Based DNA Hydrogel: Synthesis and Biosensing Application**

    by Vinod Morya, Ashish Kumar Shukla, Chinmay Ghoroi, Dhiraj Bhatia

    Functional DNA hydrogels with various motifs and functional groups require perfect sequence design to avoid cross‐bonding interference with themselves or other structural sequences. This work reports an A‐motif functional DNA hydrogel that does not require any sequence design. A‐motif DNA is a noncanonical parallel DNA duplex structure containing homopolymeric deoxyadenosines (poly‐dA) strands that undergo conformation changes from single strands at neutral pH to a parallel duplex DNA helix at acidic pH. Despite this and other advantages over other DNA motifs like no cross‐bonding interference with other structural sequences, the A‐motif has not been explored much. We successfully synthesized a DNA hydrogel by using an A‐motif as a reversible handle to polymerize a DNA three‐way junction. The A‐motif hydrogel was initially characterized by electrophoretic mobility shift assay, and dynamic light scattering, which showed the formation of higher‐order structures. Further, we used imaging techniques like atomic force microscopy and scanning electron microscope to validating its hydrogel like highly branched morphology. pH‐induced conformation transformation from monomers to gel is quick and reversible, and was analysed for multiple acid‐base cycles. The sol‐to‐gel transitions and gelation properties were further examined in rheological studies. The use of the A‐motif hydrogel in the visual detection of pathogenic target nucleic acid sequence was demonstrated for the first time in a capillary assay. Moreover, pH‐induced hydrogel formation was observed in situ as a layer over the mammalian cells. The proposed A‐motif DNA scaffold has enormous potential in designing stimuli‐responsive nanostructures that can be used for many biological applications.


  • Open Access

    pH - responsive, reversible A-motif based DNA hydrogels: synthesis and biosensing applications

    by Vinod Morya, Ashish Kumar Shukla, Chinmay Ghoroi, Dhiraj Bhatia

    Functional DNA hydrogels using various motifs and functional groups require perfect sequence designing to avoid cross-bonding interference with self or other structural sequences. The present work reports an A-motif functional DNA hydrogel that does not require any sequence design. A-motif DNA is a non-canonical parallel DNA duplex structure comprises homopolymeric deoxyadenosines (poly-dA) strands that undergo conformational changes from single strands at neutral pH to a parallel duplex DNA helix at acidic pH. Despite many advantages over other DNA motifs like no sequence, design is required and no cross-bonding interference with other structural sequences, A-motif has not been explored much. We successfully synthesized DNA hydrogel utilizing A-motif as a reversible handle to polymerize DNA three-way junction (3WJ). The composed A-motif hydrogel was first characterized by EMSA, & DLS, which shows the formation of higher-order structures. Further, we utilized imaging techniques like atomic force microscopy (AFM) and scanning electron microscope (SEM) validating its hydrogel like highly branched morphology. pH-induced conformational transformation from monomers to gel is quick and reversible, and was analysed for multiple acid-base cycles. The sol-to-gel transitions and gelation properties is further examined using rheological studies. The use of A-motif hydrogel in the visual detection of pathogenic target nucleic acid sequence is demonstrated for the first time using the capillary assay. Moreover, the pH-induced hydrogel formation is observed in-situ as a layer over the mammalian cells. The proposed A-motif DNA scaffold has enormous potential in designing stimuli-responsive nanostructures that can be utilized for many biological applications.