SKSuda Kiatkamjornwong

Suda Kiatkamjornwong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Suda Kiatkamjornwong has a total of 80 co-authors. Here are the top co-authors by number of shared publications:

  • Supaporn Noppakundilograt

    Department of Imaging and Printing Technology Faculty of Science, Chulalongkirn University Bangkok Thailand

    6 shared publications
  • Nispa Seetapan

    National Metal and Materials Technology Center, National Science and Technology Development Agency, 114 Thailand Science Park, Paholyothin Road, Pathumthani 12120, Thailand

    4 shared publications
  • Shinzo Omi

    Graduate School of Bio-Applications and Systems Engineering, Tokyo University of Agriculture and Technology, Tokyo 184-8588, Japan

    4 shared publications
  • Garry L. Rempel

    University of Waterloo

    3 shared publications
  • Qinmin Pan

    Green Polymer and Catalysis Technology Laboratory Soochow University Suzhou 215123 People's Republic of China

    3 shared publications
  • S. Damronglerd

    Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Bangkok 10330, Thailand

    3 shared publications

Latest Publications

  • Facile Syntheses of Physically Crosslinked Carboxymethyl Cellulose Hydrogels and Nanocomposite Hydrogels for Enhancing Water Absorbency and Adsorption of Sappan Wood Dye

    by Roongkan Nuisin, Tatiya Siripongpreda, Supawin Watcharamul, Krisana Siralertmukul, Suda Kiatkamjornwong

    This study was focused on a facile synthesis and comprehensive characterization of carboxymethyl cellulose (CMC)‐based hydrogel and their potential absorption. CMC reacted with Al III as an ionic crosslinker to produce physical hydrogels with better gel strength but gave a low water absorption (WAC). To elucidate this question, we fabricated both the CMC hydrogel and its nanocomposite hydrogel incorporating nano‐size calcium carbonate (NCC) particles using a two‐step process. The Al III ‐ crosslinked CMC hydrogel was subsequently filled with NCC particles to give CMC/NCC nanocomposite hydrogels. The CMC/NCC1 hydrogel with NCC 1 %wv −1 gave a three‐fold higher equilibrium WAC. To achieve an insight structure‐property‐function relation, CMC hydrogels were characterized for physically crosslinking interaction. FT‐IR confirmed that Al III ion reacts with the negative charges of carboxylate groups on the CMC chains to form the network structure via bidentate coordination. XPS data of the CMC hydrogels agreed well with the spectroscopic data. The resonance peaks of the C−O of substituent groups−CH 2 COO − were shifted upward to 177.9 ppm due to the incorporation of NCC. The higher chain flexibility (low tanδ) in CMC/NCC hydrogel with NCC 1 %wv −1 produced the higher WAC than did the composite hydrogel with NCC 5 %wv −1 adding. The CMC hydrogels were explored whether they are promisingly sustainable adsorbent for dye adsorption from Sappan wood extract while its CMC/NCC hydrogel rendered for better water absorption. Morphological studies revealed that NCC particles distributed mostly on the CMC surfaces to produce nanostructured composites with some particles penetrating through hydrogel pores. The specific surface areas of the CMC hydrogel increased with NCC amounts with lower WACs due to gel stiffness. The CMC hydrogels were confirmed as a promisingly sustainable adsorbent for dye adsorption from Sappan wood extract while its CMC/NCC hydrogel rendered for better water absorption which should be applicable for the dye concentration before CMC hydrogel dye adsorption.


  • Lignin‐Based Microgels by Inverse Suspension Polymerization: Syntheses and Dye Removal

    by Doungporn Yiamsawas, Wiyong Kangwansupamonkon, Suda Kiatkamjornwong

    Lignin, as a sustainable building block, has become popular in developing the hydrogel absorbents since the last two decades. Herein, lignosulfonate‐graft‐poly[acrylamide‐co‐(acrylic acid)], LS‐g‐P(AAm‐co‐AA) microgels are synthesized by inverse suspension, a well‐known and practical industrial process. Taking advantage of a chain transfer reaction with lignosulfonate (LS), no modification of lignin is therefore required. LS is confirmed to incorporate in the microgels as evidenced by elemental analysis, FTIR, DOSY 1H NMR, and XPS spectroscopies. Microgel particles with a high percent LS grafting are obtained by decreasing the monomer concentration in the disperse phase. Additionally, the LS‐g‐P(AAm‐co‐AA) microgels containing LS promote thermal stability and render the faster and stronger methylene blue (MB) adsorption. The adsorption kinetics and isotherms understudy indicate that the adsorption behavior of MB on the microgels follows the pseudo‐second order and Langmuir model. It is found that the LS‐g‐P(AAm‐co‐AA) microgels can take up MB with 154 mg g−1 of adsorption capacity. More importantly, the LS‐g‐P(AAm‐co‐AA) microgels can be degraded by laccase enzyme derived by fungi in nature.


  • Hydrolyzed collagen‐grafted‐poly[(acrylic acid)‐co‐(methacrylic acid)] hydrogel for drug delivery

    by Supaporn Noppakundilograt, Sopinya Choopromkaw, Suda Kiatkamjornwong

    Hydrolyzed collagen‐grafted‐poly[(acrylic acid)‐co‐(methacrylic acid)] hydrogels were synthesized by solution polymerization and confirmed by infrared spectroscopy. From sequential univariate analysis, the optimal molar ratio of acrylic acid: methacrylic acid was 92:8 in the presence of N,N′‐methylenebisacrylamide, ammonium persulfate, and N,N,N′,N′‐tetramethylethylenediamine at 0.12, 0.015, and 0.2% mol of the monomers, respectively. The water absorbency of this hydrogel was both pH‐ and temperature‐dependent, but was higher in nonbuffered water than in boric acid/citric acid/phosphate buffer under the same conditions. The optimal hydrogel could swiftly swell and deswell in neutral and acid solutions, respectively. Its potential application in drug delivery was examined using insulin and methylene blue as model payload drugs. Loading in a 50% (v v−1) ethanol solution gave a higher insulin loading level than in the buffer water. Insulin and methylene blue were both released at pH 6.8 but not at pH 1.2, but followed first order kinetics and the Higuchi equation, respectively. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 45654.


  • Encapsulated eucalyptus oil in ionically cross-linked alginate microcapsules and its controlled release

    by Supaporn Noppakundilograt, Phianghathai Piboon, Wilaiporn Graisuwan, Roongkan Nuisin, Suda Kiatkamjornwong


  • Influences of the phenolic curative content and blend proportions on the properties of dynamically vulcanized natural rubber/acrylonitrile–butadiene–styrene blends

    by Pinyo Wongthong, Charoen Nakason, Qinmin Pan, Garry L. Rempel, Suda Kiatkamjornwong

    The vulcanization of natural rubber (NR)‐blended acrylonitrile–butadiene–styrene (ABS) was carried out with a phenolic curing agent by a melt‐mixing process. The NR compound was first prepared before blending with ABS. The effects of the phenolic curative contents (10, 15, and 20 phr) and blend proportions (NR/ABS ratio = 50 : 50, 60 : 40, and 70 : 30) on the mechanical, dynamic, thermal, and morphological properties of the vulcanized NR/ABS blends were investigated. The tensile strength and hardness of the blends increased with increasing ABS content, whereas the elongation at break decreased. The strength property resulting from the thermoplastic component and the vulcanized NR was an essential component for improving the elasticity of the blends. These blends showed a greater elastic response than the neat ABS. The thermal stability of the blends increased with increasing ABS component. Scanning electron micrographs of the blends showed a two‐phase morphology system. The vulcanized 60 : 40 NR/ABS blend with 15‐phr phenolic resin showed a uniform styrene‐co‐acrylonitrile phase dispersed in the vulcanized NR phase; it provided better dispersion between the NR and ABS phases, and this resulted in superior elastic properties. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42520.


  • Multilayer‐coated NPK compound fertilizer hydrogel with controlled nutrient release and water absorbency

    by Supaporn Noppakundilograt, Natthaya Pheatcharat, Suda Kiatkamjornwong

    A novel trilayered controlled‐release nitrogen, phosphorous, and potassium (NPK) fertilizer hydrogel was prepared by dipping the NPK fertilizer granules sequentially in 7% w v−1 poly(vinyl alcohol) (PVA) and 2% w v−1 chitosan (CS) solutions and then cross‐linking the CS layer (cross‐CS) via glutaraldehyde vapor deposition. Different NPK fertilizer hydrogels were then synthesized by inverse suspension polymerization of the dried PVA/cross‐CS bilayer‐coated fertilizer granules in various molar ratios of acrylamide (AM) and acrylic acid (AA) monomers, and polymerization with varying molar ratios of ammonium persulfate, N,N,N′,N′‐tetramethylethylenediamine and N,N′‐methylenebisacrylamide (N‐MBA). The water dissolution time of the obtained PVA/cross‐CS/poly (AA‐co‐AM) trilayer‐coated NPK fertilizer hydrogel granules was prolonged, while the water absorbency increased with increasing AA contents, and decreased with increasing N‐MBA contents in the outer poly(AA‐co‐AM) coating. The optimal trilayer‐coated NPK fertilizer hydrogel obtained released 84 ± 18, 63 ± 12, and 36 ± 15% of the N, P, and K nutrients, respectively, after a 30‐day immersion in water. The release phenomena of the N, P, and K nutrients of the fertilizer hydrogel obeyed both the Korsmeyer‐Peppas and Ritger‐Peppas models with a pseudo‐Fickian diffusion mechanism. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41249.


  • Surface modification of electrospun chitosan nanofibrous mats for antibacterial activity

    by Wiyong Kangwansupamonkon, Walaiwan Tiewtrakoonwat, Pitt Supaphol, Suda Kiatkamjornwong

    Chitosan (CS) blended with poly(ethylene oxide) (PEO) was electrospun into nanofibrous mats. The spinning solution of 6.7 : 0.3 (% w/v) of CS : PEO was dissolved in a 70 : 30 (v/v) trifluoroacetic acid/dichloromethane solution. The obtained fibers were smooth without beads on their surfaces and average diameter of the fiber was 272 ± 56 nm. N‐(2‐hydroxyl) propyl‐3‐trimethyl ammonium chitosan chloride (HTACC) and N‐benzyl‐N,N‐dimethyl chitosan iodide (QBzCS) were each prepared from the CS/PEO mats. They were identified by Fourier‐transform infrared and X‐ray photoelectron spectroscopy and degree of swelling in water. Both quaternized electrospun chitosan mats exhibited superior antibacterial activity to the unmodified electrospun CS/PEO against Staphylococcus aureus and Escherichia coli at short contact times. After 4 h of contact, the reduction of both bacterial strains by CS/PEO, HTACC, and QBzCS was equal at about 99–100%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40981.


  • Microencapsulation of menthol by crosslinked chitosan via porous glass membrane emulsification technique and their controlled release properties

    by Roongkan Nuisin, Jaruwan Krongsin, Supaporn Noppakundilograt, Suda Kiatkamjornwong

    Chitosan-encapsulated menthol microcapsules were successfully prepared in an oil-in-water (o/w) emulsion using the Shirasu Porous Glass (SPG) membrane emulsification technique and high-speed dispersion technique for preparing a mixed o/w emulsion. The size of the menthol-loaded chitosan microcapsules was strongly depended on the average pore size of the SPG membrane and the amount of menthol loading in the dispersed phase. The membrane pore size of 5.2 µm was suitable for a viscous dispersed phase containing light mineral oil. The average diameter of emulsion droplets of 28.3 µm was obtained. Increasing the menthol loading in the dispersion phase from 5% to 10% w/w of chitosan decreased the emulsion droplet size with a broad size distribution. The crosslinked microcapsule size and size distribution of mixed emulsion droplets decreased with the increasing crosslinking time. The menthol release was a diffusion control which depended on the proportion of amino group in chitosan-to-tripolyphosphate molar ratio and crosslinking time. This work also demonstrated that hydrophilicity/hydrophobicity of the continuous phase and dispersion phase controlled SPG membrane emulsification efficiency and quality of the resulting emulsion droplets.