Alexei Kramarenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alexei Kramarenko has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
Deniz Etit
Eindhoven University of Technology
3 shared publicationsFernanda Neira Dangelo
Eindhoven University of Technology
3 shared publicationsG. Laudadio
2 shared publications- A. Uslu
Department of Chemical Engineering and Chemistry Eindhoven University of Technology Het Kranenveld 145612 AZ Eindhoven Nederlands
1 shared publication Alperen Uslu
Eindhoven University of Technology
1 shared publication- Deniz Etit
Department of Chemical Engineering, Imperial College London, South Kensington Campus, SW7 2AZ, UK
1 shared publication
Latest Publications
- Open Access
- 16 January 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (8) , e202301404
2‐step lignin‐first catalytic fractionation with bifunctional Pd/ß‐zeolite catalyst in a flow‐through reactor
This work demonstrates an additive and hydrogen‐free 2‐step lignin‐first fractionation in flow‐through. First, solvolytic delignification renders lignin liquors with its native chemical structure largely intact; and second, ß‐zeolite catalytic depolymerization of these liquors leads to similar monomer yields as the corresponding 1‐step fractionation process. Higher delignification temperatures lead to slightly lower ß−O−4 content in the solvated lignin, but does not affect significantly the monomer yield, so a higher temperature was overall preferred as it promotes faster delignification. Deposition of Pd on ß‐zeolite resulted in a bifunctional hydrogenation/dehydration catalyst, tested during the catalytic depolymerization of solvated lignin with and without hydrogen addition. Pd/ß‐zeolite displays synergistic effects (compared to the Pd/γ‐Al2O3 and ß‐zeolite tested individually and as a mixed bed), resulting in higher monomer yield. This is likely caused by increased acidity and the proximity between the metallic and acid active sites. Furthermore, different ß‐zeolite with varying SAR and textural properties were studied to shed light onto the effect of acidity and porosity in the stabilization of lignin monomers. While some of the catalysts showed stable performance, characterization of the spent catalyst reveals Al leaching (causing acidity loss and changes in textural properties), and some degree of coking and Pd sintering.
- 16 January 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (8) , e202301404
Open Access2‐step lignin‐first catalytic fractionation with bifunctional Pd/ß‐zeolite catalyst in a flow‐through reactor
This work demonstrates an additive and hydrogen‐free 2‐step lignin‐first fractionation in flow‐through. First, solvolytic delignification renders lignin liquors with its native chemical structure largely intact; and second, ß‐zeolite catalytic depolymerization of these liquors leads to similar monomer yields as the corresponding 1‐step fractionation process. Higher delignification temperatures lead to slightly lower ß−O−4 content in the solvated lignin, but does not affect significantly the monomer yield, so a higher temperature was overall preferred as it promotes faster delignification. Deposition of Pd on ß‐zeolite resulted in a bifunctional hydrogenation/dehydration catalyst, tested during the catalytic depolymerization of solvated lignin with and without hydrogen addition. Pd/ß‐zeolite displays synergistic effects (compared to the Pd/γ‐Al2O3 and ß‐zeolite tested individually and as a mixed bed), resulting in higher monomer yield. This is likely caused by increased acidity and the proximity between the metallic and acid active sites. Furthermore, different ß‐zeolite with varying SAR and textural properties were studied to shed light onto the effect of acidity and porosity in the stabilization of lignin monomers. While some of the catalysts showed stable performance, characterization of the spent catalyst reveals Al leaching (causing acidity loss and changes in textural properties), and some degree of coking and Pd sintering.
- Open Access
- 2 May 2022
- Published by American Chemical Society (ACS) in ChemRxiv
2-step lignin-first catalytic fractionation with bifunctional Pd/beta-zeolite catalyst in a flow-through reactor
This work demonstrates an additive and hydrogen-free 2-step lignin-first fractionation in flow-through. First, solvolytic delignification renders lignin liquors with its native chemical structure largely intact; and second, beta-zeolite catalytic depolymerization of these liquors leads to similar monomer yields as the corresponding 1-step fractionation process. Higher delignification temperatures lead to slightly lower b-O-4 content in the solvated lignin, but does not affect significantly the monomer yield, so a higher temperature was overall preferred as it promotes faster delignification. Deposition of Pd on beta-zeolite resulted in a bifunctional hydrogenation/dehydration catalyst, tested during the catalytic depolymerization of solvated lignin with and without hydrogen addition. Pd/beta-zeolite displays synergistic effects (compared to the Pd/gamma-Al2O3 and -zeolite tested individually and as a mixed bed), resulting in higher monomer yield. This is likely caused by increased acidity and the proximity between the metallic and acid active sites. Furthermore, different beta-zeolite with varying SAR and textural properties were studied to shed light onto the effect of acidity and porosity in the stabilization of lignin monomers. While some of the catalysts showed stable performance, characterization of the spent catalyst reveal Al leaching (causing acidity loss and changes in textural properties), and some degree of coking and Pd sintering.
- 2 May 2022
- Published by American Chemical Society (ACS) in ChemRxiv
Open Access2-step lignin-first catalytic fractionation with bifunctional Pd/beta-zeolite catalyst in a flow-through reactor
This work demonstrates an additive and hydrogen-free 2-step lignin-first fractionation in flow-through. First, solvolytic delignification renders lignin liquors with its native chemical structure largely intact; and second, beta-zeolite catalytic depolymerization of these liquors leads to similar monomer yields as the corresponding 1-step fractionation process. Higher delignification temperatures lead to slightly lower b-O-4 content in the solvated lignin, but does not affect significantly the monomer yield, so a higher temperature was overall preferred as it promotes faster delignification. Deposition of Pd on beta-zeolite resulted in a bifunctional hydrogenation/dehydration catalyst, tested during the catalytic depolymerization of solvated lignin with and without hydrogen addition. Pd/beta-zeolite displays synergistic effects (compared to the Pd/gamma-Al2O3 and -zeolite tested individually and as a mixed bed), resulting in higher monomer yield. This is likely caused by increased acidity and the proximity between the metallic and acid active sites. Furthermore, different beta-zeolite with varying SAR and textural properties were studied to shed light onto the effect of acidity and porosity in the stabilization of lignin monomers. While some of the catalysts showed stable performance, characterization of the spent catalyst reveal Al leaching (causing acidity loss and changes in textural properties), and some degree of coking and Pd sintering.
- Open Access
- 2 June 2021
- Published by American Chemical Society (ACS) in ChemRxiv
β-Zeolite Assisted Lignin-First Fractionation in a Flow-Through Reactor
Lignin is one of the main constituents of lignocellulosic biomass, whose valorization is essential for an economically feasible biorefinery process scheme. In the present work, a hydrogen-free one step catalytic fractionation of woody biomass using commercial b-zeolite as catalyst in a flow-through reactor was carried out, leading to a maximum aromatic monomer yield of 20.5 wt.%. Birch, spruce and walnut shells were used and compared as lignocellulosic feedstocks. Relevant insights in the reaction mechanism were obtained through 2D HSQC NMR analysis, revealing that b-O-4 cleavage is catalyzed by the zeolite. To optimize system operation, a rate limiting step analysis was performed by using different reactor configurations. It was found that the system operated in a mixed regime where the rates of both solvolytic delignification and zeolite-based depolymerization/dehydration affect the net rate of aromatic monomer production. Oxalic acid addition was found to enhance monomer production at moderate concentrations by improving solvolysis; however, it caused structural changes to the zeolite leading to lower monomer yields at higher concentrations. Zeolite stability was assessed through catalyst recycling and characterization using NH3-TPD, XRD, N2 physisorption and TGA. Main catalyst deactivation mechanisms were found to be coking and leaching, respectively leading to larger pore size and lower concentration of acid sites.
- 2 June 2021
- Published by American Chemical Society (ACS) in ChemRxiv
Open Accessβ-Zeolite Assisted Lignin-First Fractionation in a Flow-Through Reactor
Lignin is one of the main constituents of lignocellulosic biomass, whose valorization is essential for an economically feasible biorefinery process scheme. In the present work, a hydrogen-free one step catalytic fractionation of woody biomass using commercial b-zeolite as catalyst in a flow-through reactor was carried out, leading to a maximum aromatic monomer yield of 20.5 wt.%. Birch, spruce and walnut shells were used and compared as lignocellulosic feedstocks. Relevant insights in the reaction mechanism were obtained through 2D HSQC NMR analysis, revealing that b-O-4 cleavage is catalyzed by the zeolite. To optimize system operation, a rate limiting step analysis was performed by using different reactor configurations. It was found that the system operated in a mixed regime where the rates of both solvolytic delignification and zeolite-based depolymerization/dehydration affect the net rate of aromatic monomer production. Oxalic acid addition was found to enhance monomer production at moderate concentrations by improving solvolysis; however, it caused structural changes to the zeolite leading to lower monomer yields at higher concentrations. Zeolite stability was assessed through catalyst recycling and characterization using NH3-TPD, XRD, N2 physisorption and TGA. Main catalyst deactivation mechanisms were found to be coking and leaching, respectively leading to larger pore size and lower concentration of acid sites.
- Open Access
- 5 March 2021
- Published by American Chemical Society (ACS) in ChemRxiv
β-Zeolite Assisted Lignin-First Fractionation in a Flow-Through Reactor
Lignin is one of the main constituents of lignocellulosic biomass, whose valorization is essential for an economically feasible biorefinery process scheme[1]. In the present work, a hydrogen-free one step catalytic fractionation of woody biomass using commercial b-zeolite as catalyst in a flow-through reactor was carried out, leading to a maximum aromatic monomer yield of 20.5 wt.%. Birch, spruce and walnut shells were used and compared as lignocellulosic feedstocks. Relevant insights in the reaction mechanism were obtained through 2D HSQC NMR analysis, revealing that b-O-4 cleavage is catalyzed by the zeolite. To optimize system operation, a rate limiting step analysis was performed by using different reactor configurations. It was found that the system operated in a mixed regime where the rates of both solvolytic delignification and zeolite-based depolymerization/dehydration affect the net rate of aromatic monomer production. Oxalic acid addition was found to enhance monomer production at moderate concentrations by improving solvolysis; however, it caused structural changes to the zeolite leading to lower monomer yields at higher concentrations. Zeolite stability was assessed through catalyst recycling and characterization using NH 3 -TPD, XRD, N 2 physisorption and TGA. Main catalyst deactivation mechanisms were found to be coking and leaching, respectively leading to larger pore size and lower concentration of acid sites.
- 5 March 2021
- Published by American Chemical Society (ACS) in ChemRxiv
Open Accessβ-Zeolite Assisted Lignin-First Fractionation in a Flow-Through Reactor
Lignin is one of the main constituents of lignocellulosic biomass, whose valorization is essential for an economically feasible biorefinery process scheme[1]. In the present work, a hydrogen-free one step catalytic fractionation of woody biomass using commercial b-zeolite as catalyst in a flow-through reactor was carried out, leading to a maximum aromatic monomer yield of 20.5 wt.%. Birch, spruce and walnut shells were used and compared as lignocellulosic feedstocks. Relevant insights in the reaction mechanism were obtained through 2D HSQC NMR analysis, revealing that b-O-4 cleavage is catalyzed by the zeolite. To optimize system operation, a rate limiting step analysis was performed by using different reactor configurations. It was found that the system operated in a mixed regime where the rates of both solvolytic delignification and zeolite-based depolymerization/dehydration affect the net rate of aromatic monomer production. Oxalic acid addition was found to enhance monomer production at moderate concentrations by improving solvolysis; however, it caused structural changes to the zeolite leading to lower monomer yields at higher concentrations. Zeolite stability was assessed through catalyst recycling and characterization using NH 3 -TPD, XRD, N 2 physisorption and TGA. Main catalyst deactivation mechanisms were found to be coking and leaching, respectively leading to larger pore size and lower concentration of acid sites.