Gert Mehlmann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gert Mehlmann has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Matthias Luther
Institute of Electrical Energy Systems, Friedrich-Alexander-Universitt Erlangen-Nrnberg, Erlangen, Germany
8 shared publications - Ananya Kuri
Institute for Electrical Energy Systems, Friedrich-Alexander Universität Erlangen-Nürnberg, 91058 Erlangen, Germany
5 shared publications - Christian Scheibe
Siemens AG, Erlangen, Germany
3 shared publications - Julian Richter
Institute for Electrical Energy Systems, Friedrich-Alexander Universität Erlangen-Nürnberg, 91058 Erlangen, Germany
3 shared publications - Timo Wagner
Institute for Electrical Energy Systems, Friedrich-Alexander Universität Erlangen-Nürnberg, 91058 Erlangen, Germany
3 shared publications Alexander Raab
Friedrich-Alexander-Universitt Erlangen-Nrnberg,Institute of Electrical Energy Systems,Erlangen,Germany
2 shared publications
Latest Publications
- Open Access
- 26 June 2026
- Published by Elsevier in Energy Reports
- Vol. 16
Provision of black start and system services by sector-coupled hybrid power plants: A real-time validated power plant controller framework
- 26 June 2026
- Published by Elsevier in Energy Reports
- Vol. 16
Open AccessProvision of black start and system services by sector-coupled hybrid power plants: A real-time validated power plant controller framework
- Open Access
- 13 February 2025
- Published by MDPI AG in Electronics
- Vol. 14 (4) , 730
Demonstration of Grid-Forming Controls in Hybrid AC/DC Grid in a Real-Time PHiL Environment
The transition to inverter-dominated power systems with novel control strategies has created weak grid scenarios, prompting extensive research into grid-forming (GFM) converters and advanced GFM control schemes. This study evaluates two GFM control strategies for their stabilizing effects in weakly interconnected and islanded power systems: the established Virtual Synchronous Machine (VSM) control and the newly developed Phase-Restoring Principle (PRP). The evaluation is conducted using a real-time electromagnetic transient (EMT) simulation testbed with Hardware-in-the-Loop (HiL) capabilities. The system includes a multi-terminal medium-voltage (MVDC) and high-voltage direct current (HVDC) network weakly coupled to a network equivalent, represented by a scaled synchronous machine (SynM) to replicate grid inertia. Modular multilevel converters (MMCs) model the converters, while Power Hardware-in-the-Loop (PHiL) experiments integrate real power hardware. Dynamic interactions, including islanded conditions, are emulated to assess the performance of GFM controls and their interactions in HV/MV and AC/DC systems. The results demonstrate the compatibility of diverse GFM schemes with grid-following controls and synchronous machines, emphasizing their positive contributions to system stability. This modular demonstrator, as a realistic prototype of future power systems, provides a flexible platform for testing emerging GFM strategies and hardware, supporting the development of robust and stable inverter-based grids.
- 13 February 2025
- Published by MDPI AG in Electronics
- Vol. 14 (4) , 730
Open AccessDemonstration of Grid-Forming Controls in Hybrid AC/DC Grid in a Real-Time PHiL Environment
The transition to inverter-dominated power systems with novel control strategies has created weak grid scenarios, prompting extensive research into grid-forming (GFM) converters and advanced GFM control schemes. This study evaluates two GFM control strategies for their stabilizing effects in weakly interconnected and islanded power systems: the established Virtual Synchronous Machine (VSM) control and the newly developed Phase-Restoring Principle (PRP). The evaluation is conducted using a real-time electromagnetic transient (EMT) simulation testbed with Hardware-in-the-Loop (HiL) capabilities. The system includes a multi-terminal medium-voltage (MVDC) and high-voltage direct current (HVDC) network weakly coupled to a network equivalent, represented by a scaled synchronous machine (SynM) to replicate grid inertia. Modular multilevel converters (MMCs) model the converters, while Power Hardware-in-the-Loop (PHiL) experiments integrate real power hardware. Dynamic interactions, including islanded conditions, are emulated to assess the performance of GFM controls and their interactions in HV/MV and AC/DC systems. The results demonstrate the compatibility of diverse GFM schemes with grid-following controls and synchronous machines, emphasizing their positive contributions to system stability. This modular demonstrator, as a realistic prototype of future power systems, provides a flexible platform for testing emerging GFM strategies and hardware, supporting the development of robust and stable inverter-based grids.
- Open Access
- 13 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 4, 987-1002
The Kopernikus ENSURE Co-Demonstration Platform
The Kopernikus ENSURE Co-Demonstration Platform enables the investigation of components and processes for the changing power system with grid models adapted to the respective problem. The platform is developed from the power system's perspective. A central aspect of the platform is to analyze several technical solutions of different stakeholders in shared power system models. Furthermore the platform enables the investigation of interactions between different technologies, the system stability or protection scenarios that cannot be simulated in the real power system or only to a very limited extent. The comparison of solution approaches on a common model basis enables reliable overall systemic statements. To realize this, a multi-domain and multi-vendor approach is pursued, covering electromagnetic transients, electromechanical transients, continuous power flow simulations, and real-time simulators from different manufacturers. The core components of the platform are distributed real-time simulations, including the coupling of different laboratories in Germany and the developed power system models. Investigations with the real-time capable platform can be carried out purely simulatively or, depending on the connected laboratory, as Control/Power-Hardware-in-the-Loop simulations.
- 13 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 4, 987-1002
Open AccessThe Kopernikus ENSURE Co-Demonstration Platform
The Kopernikus ENSURE Co-Demonstration Platform enables the investigation of components and processes for the changing power system with grid models adapted to the respective problem. The platform is developed from the power system's perspective. A central aspect of the platform is to analyze several technical solutions of different stakeholders in shared power system models. Furthermore the platform enables the investigation of interactions between different technologies, the system stability or protection scenarios that cannot be simulated in the real power system or only to a very limited extent. The comparison of solution approaches on a common model basis enables reliable overall systemic statements. To realize this, a multi-domain and multi-vendor approach is pursued, covering electromagnetic transients, electromechanical transients, continuous power flow simulations, and real-time simulators from different manufacturers. The core components of the platform are distributed real-time simulations, including the coupling of different laboratories in Germany and the developed power system models. Investigations with the real-time capable platform can be carried out purely simulatively or, depending on the connected laboratory, as Control/Power-Hardware-in-the-Loop simulations.
- 30 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- Vol. 17 (3) , 3389-3400
Power Dispatch Capacity of a Grid-Forming Control Based on Phase Restoring Principle
The concept of grid-forming control is driving system operators to define this technology's capabilities and requirements to maintain grid stability, reliability, and the need to provide some of the services previously provided by synchronous generators. The novel control strategy, called the “Phase Restoring Principle” (PRP), was recently introduced for converter operated power systems. This article provides further insights and confirmation of the PRP grid-forming capabilities based on the response requirements from the perspective of the power system. It describes the extension of the control by supplementing PRP with active power control allowing the control to cooperate with other sources. The generalized small-signal solution of the control is derived and evidenced. Analytical deductions supported by simulative evidence of the power dispatch based on PRP are displayed in single, double, and triple converter configurations. The development of steady-state operating point and, hence, drift frequency using the principle of PRP with active power control is examined and discussed based on reference values and weighted gain selection. The enhanced PRP control structure also displays controller stability for sufficiently small drift frequencies and achieves nominal frequency with dedicated parameters.
- 30 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- Vol. 17 (3) , 3389-3400
Power Dispatch Capacity of a Grid-Forming Control Based on Phase Restoring Principle
The concept of grid-forming control is driving system operators to define this technology's capabilities and requirements to maintain grid stability, reliability, and the need to provide some of the services previously provided by synchronous generators. The novel control strategy, called the “Phase Restoring Principle” (PRP), was recently introduced for converter operated power systems. This article provides further insights and confirmation of the PRP grid-forming capabilities based on the response requirements from the perspective of the power system. It describes the extension of the control by supplementing PRP with active power control allowing the control to cooperate with other sources. The generalized small-signal solution of the control is derived and evidenced. Analytical deductions supported by simulative evidence of the power dispatch based on PRP are displayed in single, double, and triple converter configurations. The development of steady-state operating point and, hence, drift frequency using the principle of PRP with active power control is examined and discussed based on reference values and weighted gain selection. The enhanced PRP control structure also displays controller stability for sufficiently small drift frequencies and achieves nominal frequency with dedicated parameters.
- 12 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 67, 1-6
A Multi-Instance, Multi-Timestep Co-Simulation Approach for Power System Simulation Tools
This paper proposes a Co-Simulation concept that couples two or more simulators utilizing different timesteps. The interprocess communication is handled via a shared memory based algorithm. Unfavorable effects due to the conversion between time steps are eliminated using filters. The electrical representation is based on a Bergeron line model utilizing the dependency of time and location of travelling waves along transmission lines. The proposed Co-Simulation has minimal impact on accuracy while greatly reducing simulation execution time.
- 12 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 67, 1-6
A Multi-Instance, Multi-Timestep Co-Simulation Approach for Power System Simulation Tools
This paper proposes a Co-Simulation concept that couples two or more simulators utilizing different timesteps. The interprocess communication is handled via a shared memory based algorithm. Unfavorable effects due to the conversion between time steps are eliminated using filters. The electrical representation is based on a Bergeron line model utilizing the dependency of time and location of travelling waves along transmission lines. The proposed Co-Simulation has minimal impact on accuracy while greatly reducing simulation execution time.
- 18 July 2022
- Published by Elsevier in Electric Power Systems Research
- Vol. 212
Interfacing real-time and offline power system simulation tools using UDP or FPGA systems
- 18 July 2022
- Published by Elsevier in Electric Power Systems Research
- Vol. 212
Interfacing real-time and offline power system simulation tools using UDP or FPGA systems
- 15 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 19, 161-165
Impact of Time Constants of Reactive Power Sources on Short-Term Voltage Stability
As a result of the enduring change in power systems the risk of blackouts caused by voltage instability is growing. This paper addresses the challenges of future requirements and Var equipment. The focus is on enhancing the short-term dynamic performance of future electrical power systems. In contrast to traditional steady-state considerations, possible placement options of reactive power sources using dynamic stability indicators based on voltage trajectories are determined. After identifying worst-case fault scenarios based on the Contingency Severity Index (CSI), different time constants for the reactive power control of MSC and STATCOM and their effects on the short-term voltage stability are investigated. The preselection is used to reduce the computational effort and is based on indicators that are determined using RMS calculations. The approach is tested using a modified Nordic Test System with a 35% share of renewable energy sources.
- 15 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 19, 161-165
Impact of Time Constants of Reactive Power Sources on Short-Term Voltage Stability
As a result of the enduring change in power systems the risk of blackouts caused by voltage instability is growing. This paper addresses the challenges of future requirements and Var equipment. The focus is on enhancing the short-term dynamic performance of future electrical power systems. In contrast to traditional steady-state considerations, possible placement options of reactive power sources using dynamic stability indicators based on voltage trajectories are determined. After identifying worst-case fault scenarios based on the Contingency Severity Index (CSI), different time constants for the reactive power control of MSC and STATCOM and their effects on the short-term voltage stability are investigated. The preselection is used to reduce the computational effort and is based on indicators that are determined using RMS calculations. The approach is tested using a modified Nordic Test System with a 35% share of renewable energy sources.
- Open Access
- 21 December 2021
- Published by MDPI AG in Electronics
- Vol. 11 (1) , 7
Stability Analysis of Power Hardware-in-the-Loop Simulations for Grid Applications
Power Hardware-in-the-Loop (PHiL) simulation is an emerging testing methodology of real hardware equipment within an emulated virtual environment. The closed loop interfacing between the Hardware under Test (HuT) and the Real Time Simulation (RTS) enables a realistic simulation but can also result in an unstable system. In addition to fundamentals in PHiL simulation and interfacing, this paper therefore provides a consistent and comprehensive study of PHiL stability. An analytic analysis is compared with a simulative approach and is supplemented by practical validations of the stability limits in PHiL simulation. Special focus is given on the differences between a switching and a linear amplifier as power interface (PI). Stability limits and the respective factors of influence (e.g., Feedback Current Filtering) are elaborated with a minimal example circuit with voltage-type Ideal Transformer Model (ITM) PHiL interface algorithm (IA). Finally, the findings are transferred to a real low-voltage grid PHiL application with residential load and photovoltaic system.
- 21 December 2021
- Published by MDPI AG in Electronics
- Vol. 11 (1) , 7
Open AccessStability Analysis of Power Hardware-in-the-Loop Simulations for Grid Applications
Power Hardware-in-the-Loop (PHiL) simulation is an emerging testing methodology of real hardware equipment within an emulated virtual environment. The closed loop interfacing between the Hardware under Test (HuT) and the Real Time Simulation (RTS) enables a realistic simulation but can also result in an unstable system. In addition to fundamentals in PHiL simulation and interfacing, this paper therefore provides a consistent and comprehensive study of PHiL stability. An analytic analysis is compared with a simulative approach and is supplemented by practical validations of the stability limits in PHiL simulation. Special focus is given on the differences between a switching and a linear amplifier as power interface (PI). Stability limits and the respective factors of influence (e.g., Feedback Current Filtering) are elaborated with a minimal example circuit with voltage-type Ideal Transformer Model (ITM) PHiL interface algorithm (IA). Finally, the findings are transferred to a real low-voltage grid PHiL application with residential load and photovoltaic system.
- 6 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Steady-State and Dynamic Security Assessment for System Operation
This contribution provides the implementation of a holistic operational security assessment process for both steady-state security and dynamic stability. The merging of steady-state and dynamic security assessment as a sequential process is presented. A steady-state and dynamic modeling of a VSC-HVDC was performed including curative and stabilizing measures as remedial actions. The assessment process was validated by a case study on a modified version of the Nordic 32 system. Simulation results showed that measure selection based on purely steady-state contingency analysis can lead to loss of stability in time domain. A subsequent selection of measures on the basis of the dynamic security assessment was able to guarantee the operational security for the stationary N-1 scenario as well as the power system stability.
- 6 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Steady-State and Dynamic Security Assessment for System Operation
This contribution provides the implementation of a holistic operational security assessment process for both steady-state security and dynamic stability. The merging of steady-state and dynamic security assessment as a sequential process is presented. A steady-state and dynamic modeling of a VSC-HVDC was performed including curative and stabilizing measures as remedial actions. The assessment process was validated by a case study on a modified version of the Nordic 32 system. Simulation results showed that measure selection based on purely steady-state contingency analysis can lead to loss of stability in time domain. A subsequent selection of measures on the basis of the dynamic security assessment was able to guarantee the operational security for the stationary N-1 scenario as well as the power system stability.
- 6 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 36 (6) , 5369-5384
A Novel Grid Forming Control Scheme Revealing a True Inertia Principle
This article proposes an unconventional strategy for a grid forming converter, based on a phase restoring control concept by which a constant steady state frequency is achieved. This control scheme is inherently without a phase-locked loop (PLL) and keeps the power system frequency at its nominal value. Under disturbance, the control response mimics infinite virtual inertia since the power system frequency always returns to its nominal value. Therefore, this control presents a physical equivalence to a power system response with substantial inertia provided by synchronous machines. The understanding of frequency drift as a local phenomenon and power system frequency as a global aspect is briefly introduced. Further, the inherent discretization of a converter control as part of the feedback loop over the continuous network system is also considered. The concept has been mathematically investigated in a realistic test bench and global stability of the control is displayed based on the necessary boundary conditions. Simulation results supporting the mathematical hypothesis and visualizing the controller actions are presented. As a beneficial coincidence of these ideas, the control structure ensures similar responses in both electromagnetic transients (EMT) and root mean square (RMS) simulations.
- 6 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 36 (6) , 5369-5384
A Novel Grid Forming Control Scheme Revealing a True Inertia Principle
This article proposes an unconventional strategy for a grid forming converter, based on a phase restoring control concept by which a constant steady state frequency is achieved. This control scheme is inherently without a phase-locked loop (PLL) and keeps the power system frequency at its nominal value. Under disturbance, the control response mimics infinite virtual inertia since the power system frequency always returns to its nominal value. Therefore, this control presents a physical equivalence to a power system response with substantial inertia provided by synchronous machines. The understanding of frequency drift as a local phenomenon and power system frequency as a global aspect is briefly introduced. Further, the inherent discretization of a converter control as part of the feedback loop over the continuous network system is also considered. The concept has been mathematically investigated in a realistic test bench and global stability of the control is displayed based on the necessary boundary conditions. Simulation results supporting the mathematical hypothesis and visualizing the controller actions are presented. As a beneficial coincidence of these ideas, the control structure ensures similar responses in both electromagnetic transients (EMT) and root mean square (RMS) simulations.