Martin Herder
Martin Herder has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Baraa Asfari
Xolo GmbH Volmerstraße 9B 12489 Berlin Germany
1 shared publicationChristian Sebastian Fabian Kromer
Xolo GmbH Volmerstraße 9B 12489 Berlin Germany
1 shared publicationDirk Radzinski
Xolo GmbH Volmerstraße 9B 12489 Berlin Germany
1 shared publication- Emil List-Kratochvil
Humboldt-Universität zu Berlin
1 shared publication Eric Israel
Xolo GmbH Volmerstraße 9B 12489 Berlin Germany
1 shared publication- Felix Hermerschmidt
Institut für Physik Institut für Chemie Humboldt‐Universität zu Berlin Zum Großen Windkanal 2 12489 Berlin Germany
1 shared publication
Latest Publications
- 13 December 2024
- Published by Wiley in Advanced Materials
- Vol. 37 (5) , e2413391
Xolography for 3D Printing in Microgravity
Xolography is a volumetric 3D printing technique utilizing intersecting light beams within a volume of photopolymer for a spatially controlled photopolymerization. Unlike layer‐based methods, Xolography creates structures continuously within a closed photopolymer vat, eliminating the prevalent need for support structures and allowing full geometrical freedom at high printing speeds. The volumetric working principle does not rely on gravity, making Xolography an outstanding technology for additive manufacturing under microgravity conditions as illustrated in a set of experiments during a parabolic flight campaign. The microgravity environment obviates the need for rheology control of resins, enabling the use of low‐viscosity formulations (e.g., 11 mPa s) while maintaining the fast and precise 3D printing of acrylic polymer resins and hydrogels. Xolography's speed and reliability facilitate rapid iterations of a print task between Earth's gravity and microgravity conditions. This capability positions Xolography as an ideal tool for material research and manufacturing in space, offering significant cost and efficiency advantages over traditional methods.
- 13 December 2024
- Published by Wiley in Advanced Materials
- Vol. 37 (5) , e2413391
Xolography for 3D Printing in Microgravity
Xolography is a volumetric 3D printing technique utilizing intersecting light beams within a volume of photopolymer for a spatially controlled photopolymerization. Unlike layer‐based methods, Xolography creates structures continuously within a closed photopolymer vat, eliminating the prevalent need for support structures and allowing full geometrical freedom at high printing speeds. The volumetric working principle does not rely on gravity, making Xolography an outstanding technology for additive manufacturing under microgravity conditions as illustrated in a set of experiments during a parabolic flight campaign. The microgravity environment obviates the need for rheology control of resins, enabling the use of low‐viscosity formulations (e.g., 11 mPa s) while maintaining the fast and precise 3D printing of acrylic polymer resins and hydrogels. Xolography's speed and reliability facilitate rapid iterations of a print task between Earth's gravity and microgravity conditions. This capability positions Xolography as an ideal tool for material research and manufacturing in space, offering significant cost and efficiency advantages over traditional methods.
- Open Access
- 6 October 2021
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (4) , 044002
Reversible training of waveguide-based AND/OR gates for optically driven artificial neural networks using photochromic molecules
Artificial neural networks (ANNs) are inspired by the biological nervous system. The high performance of such ANNs is achieved through the dynamic change of the synaptic weights by applying self-optimizing learning algorithms. Despite the simple operations for each single element in an ANN, a network with a huge amount of simulated elements consumes lots of computing capacity using von Neumann computer architectures. To overcome this issue, neuromorphic devices facilitate the design of hardware ANNs that emulate the synaptic functions. Here we demonstrate the viability of such an approach using photonic waveguides in combination with a photochromic diarylethene (DAE) molecule. By positioning and irradiating DAE molecules on single waveguides, we modulate the intensity and thereby emulate the plasticity of the synaptic weights. To run the photonic device as an ANN we firstly characterize the modulation range and encode a learning procedure accordingly. As the proof of concept we operate a y-shaped waveguide performing basic AND/OR logic gate functions, with the capability to switch between these two gate functions by using specific training sets.
- 6 October 2021
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (4) , 044002
Open AccessReversible training of waveguide-based AND/OR gates for optically driven artificial neural networks using photochromic molecules
Artificial neural networks (ANNs) are inspired by the biological nervous system. The high performance of such ANNs is achieved through the dynamic change of the synaptic weights by applying self-optimizing learning algorithms. Despite the simple operations for each single element in an ANN, a network with a huge amount of simulated elements consumes lots of computing capacity using von Neumann computer architectures. To overcome this issue, neuromorphic devices facilitate the design of hardware ANNs that emulate the synaptic functions. Here we demonstrate the viability of such an approach using photonic waveguides in combination with a photochromic diarylethene (DAE) molecule. By positioning and irradiating DAE molecules on single waveguides, we modulate the intensity and thereby emulate the plasticity of the synaptic weights. To run the photonic device as an ANN we firstly characterize the modulation range and encode a learning procedure accordingly. As the proof of concept we operate a y-shaped waveguide performing basic AND/OR logic gate functions, with the capability to switch between these two gate functions by using specific training sets.
- Open Access
- 3 December 2020
- Published by Frontiers Media SA in Advanced Optical Technologies
- Vol. 10 (1) , 59-70
Multifunctional materials for lean processing of waferscale optics
The continuous miniaturization of components and devices along with the increasing need of sustainability in production requires materials which can fulfill the manifold requests concerning their functionality. From an industrial point of view emphasis is on cost reduction either for the materials, the processes, or for both, along with a facilitation of processing and a general reduction of resource consumption in manufacturing. Multifunctional nanoscale materials have been widely investigated due to their tunable material properties and their ability to fulfill the increasingly growing demands in miniaturization, ease of processes, low-cost manufacturing, scalability, reliability, and finally sustainability. A material class which fulfills these requirements and is suited for integrated or waferscale optics are inorganic–organic hybrid polymers such as ORMOCER®s [ORMOCER®is registered by the Fraunhofer Gesellschaft für Angewandte Forschung e.V. and commercialized by microresist technology GmbH under license since 2003]. The combination of chemically designed multifunctional low-cost materials with tunable optical properties is very attractive for (integrated) optical and waferscale applications via a variety of different nano- and microstructuring techniques to fabricate micro- and nano-optical components, typically within less than a handful of process steps. The influence of photoinitiator and cross-linking conditions onto the optical properties of an acrylate-based inorganic–organic hybrid polymer will be discussed, and its suitability for being applied in waferscale optics is demonstrated and discussed for miniaturized multi- and single channel imaging optics.
- 3 December 2020
- Published by Frontiers Media SA in Advanced Optical Technologies
- Vol. 10 (1) , 59-70
Open AccessMultifunctional materials for lean processing of waferscale optics
The continuous miniaturization of components and devices along with the increasing need of sustainability in production requires materials which can fulfill the manifold requests concerning their functionality. From an industrial point of view emphasis is on cost reduction either for the materials, the processes, or for both, along with a facilitation of processing and a general reduction of resource consumption in manufacturing. Multifunctional nanoscale materials have been widely investigated due to their tunable material properties and their ability to fulfill the increasingly growing demands in miniaturization, ease of processes, low-cost manufacturing, scalability, reliability, and finally sustainability. A material class which fulfills these requirements and is suited for integrated or waferscale optics are inorganic–organic hybrid polymers such as ORMOCER®s [ORMOCER®is registered by the Fraunhofer Gesellschaft für Angewandte Forschung e.V. and commercialized by microresist technology GmbH under license since 2003]. The combination of chemically designed multifunctional low-cost materials with tunable optical properties is very attractive for (integrated) optical and waferscale applications via a variety of different nano- and microstructuring techniques to fabricate micro- and nano-optical components, typically within less than a handful of process steps. The influence of photoinitiator and cross-linking conditions onto the optical properties of an acrylate-based inorganic–organic hybrid polymer will be discussed, and its suitability for being applied in waferscale optics is demonstrated and discussed for miniaturized multi- and single channel imaging optics.