Xuyang Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xuyang Chen has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Xufeng Wang
School of Mines, China University of Mining and Technology, Xuzhou 221116, China
3 shared publications Chang Zechao
School of Mines, China University of Mining and Technology, Xuzhou, China
1 shared publication- Chenlong Qian
School of Mines, China University of Mining and Technology, Xuzhou 221116, China
1 shared publication - Enqiang Liu1 shared publication
- Hui Gao
Shanxi Huadian Yuheng Coal and Electricity Co., Ltd., Yulin 719000, China
1 shared publication - Jiyao Wang
China Univ Min & Technol, Sch Mines, Jiangsu Engn Lab Mine Earthquake Monitoring & Pre, Xuzhou 221116, Jiangsu, Peoples R China
1 shared publication
Latest Publications
- Open Access
Modeling the Speed‐Induced Key Block Motion and Support Resistance in Longwall Mining With a Multilayer Hard Roof: Insights From the Xiaojihan Coal Mine
To theoretically explain and quantify the effect of advancing speed (ADS) on ground pressure (GP) behavior, the 13,218 working face of the Xiaojihan Coal Mine (XCM) was taken as the engineering case. Field measurements and theoretical analysis were combined to examine how changes in ADS influence the roof structure and the support resistance. Considering the motion characteristics of key blocks, a calculation model for support resistance under multilayer thick hard roofs was established, incorporating the ADS factor. The results show that the overlying roof behaves as a composite system composed of a short cantilever beam and a voussoir beam structure, where the periodic fracture of the voussoir beam is the dominant cause of periodic weighting. When the ADS is accelerated from 5 to 15 m/day, the periodic weighting interval (PWI) grows by 29.1%, while the subsidence, rotation angle, and subsidence duration of key block C decrease by 39.1%, 53.5%, and 57.0%, respectively. The horizontal thrust between blocks increases by 31.6%, and the support resistance decreases by 7.9%. Comparison with field data (11,467–13,852 kN) shows the model predictions (11,549–13,757 kN) agree within 5%, verifying its reliability and applicability. The findings provide theoretical guidance for the optimization of advancing parameters and offer practical reference for GP control and safe, high‐intensity mining under multilayer hard roof conditions.
Open AccessModeling the Speed‐Induced Key Block Motion and Support Resistance in Longwall Mining With a Multilayer Hard Roof: Insights From the Xiaojihan Coal Mine
To theoretically explain and quantify the effect of advancing speed (ADS) on ground pressure (GP) behavior, the 13,218 working face of the Xiaojihan Coal Mine (XCM) was taken as the engineering case. Field measurements and theoretical analysis were combined to examine how changes in ADS influence the roof structure and the support resistance. Considering the motion characteristics of key blocks, a calculation model for support resistance under multilayer thick hard roofs was established, incorporating the ADS factor. The results show that the overlying roof behaves as a composite system composed of a short cantilever beam and a voussoir beam structure, where the periodic fracture of the voussoir beam is the dominant cause of periodic weighting. When the ADS is accelerated from 5 to 15 m/day, the periodic weighting interval (PWI) grows by 29.1%, while the subsidence, rotation angle, and subsidence duration of key block C decrease by 39.1%, 53.5%, and 57.0%, respectively. The horizontal thrust between blocks increases by 31.6%, and the support resistance decreases by 7.9%. Comparison with field data (11,467–13,852 kN) shows the model predictions (11,549–13,757 kN) agree within 5%, verifying its reliability and applicability. The findings provide theoretical guidance for the optimization of advancing parameters and offer practical reference for GP control and safe, high‐intensity mining under multilayer hard roof conditions.
- Open Access
Experimental Study on Failure Law and Mechanism of Red Sandstone under Ultrasonic Vibration Excitation
Rock breakage is inevitable for creating openings in underground engineering operations. Ultrasonic vibration has been attracting extensive attention for such a practice considering its outstanding performance in rock breakage. In order to understand the fundamental failure mechanism of rocks subjected to ultrasonic vibrations, based on P-wave monitoring and the direct current electric method, we captured the evolution of the failure process of the red sandstone. In addition, we fundamentally analyse the failure mechanisms of the red sandstone using numerical simulation and microscopy scans. It was found that extensive fractures were initiated due to the ultrasonic vibration and the fractures propagated downwards forming a conical shape. The apparent resistivity became as high as 320000 Ω being 16 times the initial resistivity. The fracture propagated downwards as deep as 41 mm. The maximum damage parameter on the testing sample could be as high as 0.68, and it completely failed after 140 s of ultrasonic vibration duration. As a result of numerical simulation, it was found that the microfractures and pores in the testing sample were activated due to the stress wave resulting from the ultrasonic vibration leading to the fracture propagation and eventually complete failure. Through comparing the performance of uniaxial compressive loading and ultrasonic vibration techniques in rock damage, it was concluded the latter has a much higher capacity and competence in rock breakage.
Open AccessExperimental Study on Failure Law and Mechanism of Red Sandstone under Ultrasonic Vibration Excitation
Rock breakage is inevitable for creating openings in underground engineering operations. Ultrasonic vibration has been attracting extensive attention for such a practice considering its outstanding performance in rock breakage. In order to understand the fundamental failure mechanism of rocks subjected to ultrasonic vibrations, based on P-wave monitoring and the direct current electric method, we captured the evolution of the failure process of the red sandstone. In addition, we fundamentally analyse the failure mechanisms of the red sandstone using numerical simulation and microscopy scans. It was found that extensive fractures were initiated due to the ultrasonic vibration and the fractures propagated downwards forming a conical shape. The apparent resistivity became as high as 320000 Ω being 16 times the initial resistivity. The fracture propagated downwards as deep as 41 mm. The maximum damage parameter on the testing sample could be as high as 0.68, and it completely failed after 140 s of ultrasonic vibration duration. As a result of numerical simulation, it was found that the microfractures and pores in the testing sample were activated due to the stress wave resulting from the ultrasonic vibration leading to the fracture propagation and eventually complete failure. Through comparing the performance of uniaxial compressive loading and ultrasonic vibration techniques in rock damage, it was concluded the latter has a much higher capacity and competence in rock breakage.
- 24 October 2021
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 55 (1) , 363-378
Creep and Control of the Deep Soft Rock Roadway (DSRR): Insights from Laboratory Testing and Practice in Pingdingshan Mining Area
- 24 October 2021
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 55 (1) , 363-378
Creep and Control of the Deep Soft Rock Roadway (DSRR): Insights from Laboratory Testing and Practice in Pingdingshan Mining Area