Simon M Rochester
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Simon M Rochester has a total of 106 co-authors. Here are the top co-authors by number of shared publications:
- Dmitry Budker
Helmholtz Institute Mainz
10 shared publications - Felipe Pedreros Bustos
Helmholtz Institute Johannes Gutenberg-Universität Mainz 55099 Mainz Germany
4 shared publications - Hossein R Sadeghpour
Center for Astrophysics | ITAMP Harvard & Smithsonian 60 Garden St. 02138 Cambridge Massachusetts USA
4 shared publications - Iouli E. Gordon
Atomic and Molecular Physics Division, Harvard-Smithsonian Center for Astrophysics, Cambridge, MA, USA
4 shared publications - Justin Albert
University of Victoria
4 shared publications - Kelly Chance
Atomic and Molecular Physics Division Center for Astrophysics | Harvard & Smithsonian Cambridge MA USA
4 shared publications
Latest Publications
- 1 April 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (4)
Improvements in optical metrology for high-performance variable-line-spacing x-ray gratings
We discuss a project to develop a precision metrology system for variable-line-spacing x-ray gratings using interferometric microscopes. We are developing test standards and calibration techniques to measure and correct for geometrical distortion and blur, and data processing techniques to combine multiple measurements and measure line spacing with high accuracy.
- 1 April 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (4)
Improvements in optical metrology for high-performance variable-line-spacing x-ray gratings
We discuss a project to develop a precision metrology system for variable-line-spacing x-ray gratings using interferometric microscopes. We are developing test standards and calibration techniques to measure and correct for geometrical distortion and blur, and data processing techniques to combine multiple measurements and measure line spacing with high accuracy.
- 24 February 2026
- Published by American Physical Society (APS) in Physical Review A
- Vol. 113 (4)
Degenerate mirrorless lasing in thermal vapors
- 24 February 2026
- Published by American Physical Society (APS) in Physical Review A
- Vol. 113 (4)
Degenerate mirrorless lasing in thermal vapors
- 1 January 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (1)
Application and performance of the novel Elcomat 5000 autocollimator in slope-measuring profilometry of beamline optics
Autocollimators are used in profilometers for the precise form measurement of beam-shaping optics for synchrotron light sources and x-ray free-electron lasers. This application requires using an aperture stop, typically 2.5 mm in diameter, which limits the footprint of the autocollimator’s measuring beam on the optics to achieve a sufficiently high lateral resolution. Central to the development of profilometry has been the availability of commercial autocollimators, such as the Elcomat 3000 from Möller–Wedel Optical. Although autocollimators are generally not designed for use with small apertures, this device has proven capable and has become the de facto standard. Now that it has been replaced by the Elcomat 5000, we evaluate the performance of several autocollimators of this type at small apertures, including the characterization of instrument transfer functions with a chirped height profile. We demonstrate that the Elcomat 5000 is capable of repeatable angle measurements with a standard deviation of 0.014 arcsec at an aperture diameter of 1.6 mm, whereas the Elcomat 3000 achieves 0.03 arcsec at 2.5 mm, comparing models with modified reticle designs. We also investigate the influence of optical aberrations of the autocollimator’s objective and their changes with the path length to the surface under test. We characterize the sensitivity of the angle measurement to changes in environmental parameters, in particular, barometric pressure. These efforts are aimed at approaching fundamental limits in the characterization of the shape of optical surfaces with autocollimator-based profilometers so that these are ready for characterizing the next generation of synchrotron and XFEL beamline optics.
- 1 January 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (1)
Application and performance of the novel Elcomat 5000 autocollimator in slope-measuring profilometry of beamline optics
Autocollimators are used in profilometers for the precise form measurement of beam-shaping optics for synchrotron light sources and x-ray free-electron lasers. This application requires using an aperture stop, typically 2.5 mm in diameter, which limits the footprint of the autocollimator’s measuring beam on the optics to achieve a sufficiently high lateral resolution. Central to the development of profilometry has been the availability of commercial autocollimators, such as the Elcomat 3000 from Möller–Wedel Optical. Although autocollimators are generally not designed for use with small apertures, this device has proven capable and has become the de facto standard. Now that it has been replaced by the Elcomat 5000, we evaluate the performance of several autocollimators of this type at small apertures, including the characterization of instrument transfer functions with a chirped height profile. We demonstrate that the Elcomat 5000 is capable of repeatable angle measurements with a standard deviation of 0.014 arcsec at an aperture diameter of 1.6 mm, whereas the Elcomat 3000 achieves 0.03 arcsec at 2.5 mm, comparing models with modified reticle designs. We also investigate the influence of optical aberrations of the autocollimator’s objective and their changes with the path length to the surface under test. We characterize the sensitivity of the angle measurement to changes in environmental parameters, in particular, barometric pressure. These efforts are aimed at approaching fundamental limits in the characterization of the shape of optical surfaces with autocollimator-based profilometers so that these are ready for characterizing the next generation of synchrotron and XFEL beamline optics.
- 30 September 2025
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 24 (3)
Efficient multiresonant laser isotope separation
- 30 September 2025
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 24 (3)
Efficient multiresonant laser isotope separation
- Open Access
- 19 July 2023
- Published by IOP Publishing in Journal of Physics B: Atomic, Molecular and Optical Physics
- Vol. 56 (15) , 155301
Efficient cooling of high-angular-momentum atoms
We propose a highly efficient and fast method of translational cooling for high-angular-momentum atoms. Optical pumping and stimulated transitions, combined with magnetic forces, can be used to compress phase-space density, and the efficiency of each compression step increases with the angular momentum. Entropy is removed by spontaneously emitted photons, and particle number is conserved. This method may be an attractive alternative to evaporative cooling of atoms and possibly molecules in order to produce quantum degenerate gases.
- 19 July 2023
- Published by IOP Publishing in Journal of Physics B: Atomic, Molecular and Optical Physics
- Vol. 56 (15) , 155301
Open AccessEfficient cooling of high-angular-momentum atoms
We propose a highly efficient and fast method of translational cooling for high-angular-momentum atoms. Optical pumping and stimulated transitions, combined with magnetic forces, can be used to compress phase-space density, and the efficiency of each compression step increases with the angular momentum. Entropy is removed by spontaneously emitted photons, and particle number is conserved. This method may be an attractive alternative to evaporative cooling of atoms and possibly molecules in order to produce quantum degenerate gases.
- Open Access
- 14 February 2023
- Published by IOP Publishing in Journal of Physics B: Atomic, Molecular and Optical Physics
- Vol. 56 (5) , 054001
Robust two-state swap by stimulated Raman adiabatic passage
Efficient initialization and manipulation of quantum states is important for numerous applications and it usually requires the ability to perform high fidelity and robust swapping of the populations of quantum states. Stimulated Raman adiabatic passage (STIRAP) has been known to perform efficient and robust inversion of the ground states populations of a three-level system. However, its performance is sensitive to the initial state of the system. In this contribution we demonstrate that a slight modification of STIRAP, where we introduce a non-zero single-photon detuning, allows for efficient and robust population swapping for any initial state. The results of our work could be useful for efficient and robust state preparation, dynamical decoupling and design of quantum gates in ground state qubits via two-photon interactions.
- 14 February 2023
- Published by IOP Publishing in Journal of Physics B: Atomic, Molecular and Optical Physics
- Vol. 56 (5) , 054001
Open AccessRobust two-state swap by stimulated Raman adiabatic passage
Efficient initialization and manipulation of quantum states is important for numerous applications and it usually requires the ability to perform high fidelity and robust swapping of the populations of quantum states. Stimulated Raman adiabatic passage (STIRAP) has been known to perform efficient and robust inversion of the ground states populations of a three-level system. However, its performance is sensitive to the initial state of the system. In this contribution we demonstrate that a slight modification of STIRAP, where we introduce a non-zero single-photon detuning, allows for efficient and robust population swapping for any initial state. The results of our work could be useful for efficient and robust state preparation, dynamical decoupling and design of quantum gates in ground state qubits via two-photon interactions.
- 11 April 2022
- Published by American Physical Society (APS) in Physical Review A
- Vol. 105 (4) , 043109
All-optical spin locking in alkali-metal-vapor magnetometers
The nonlinear Zeeman effect can induce splittings and asymmetries of magnetic-resonance lines in the geophysical magnetic-field range. We demonstrate an all-optical scheme, based on spin locking, to suppress the nonlinear Zeeman effect. This scheme achieves spin locking via an effective oscillating magnetic field in the form of AC Stark shifts induced by an intensity- and polarization-modulated laser beam. This results in the collapse of the multicomponent asymmetric magnetic-resonance line with width in the Earth-field range into a peak with a central component width of 25 Hz. The technique is expected to be broadly applicable in practical magnetometry, potentially boosting the sensitivity and accuracy of Earth-surveying magnetometers by increasing the magnetic-resonance amplitude and decreasing its width. An advantage of the all-optical approach is the absence of crosstalk between nearby sensors when they are used in a gradiometric or array arrangement.- 11 April 2022
- Published by American Physical Society (APS) in Physical Review A
- Vol. 105 (4) , 043109
All-optical spin locking in alkali-metal-vapor magnetometers
The nonlinear Zeeman effect can induce splittings and asymmetries of magnetic-resonance lines in the geophysical magnetic-field range. We demonstrate an all-optical scheme, based on spin locking, to suppress the nonlinear Zeeman effect. This scheme achieves spin locking via an effective oscillating magnetic field in the form of AC Stark shifts induced by an intensity- and polarization-modulated laser beam. This results in the collapse of the multicomponent asymmetric magnetic-resonance line with width in the Earth-field range into a peak with a central component width of 25 Hz. The technique is expected to be broadly applicable in practical magnetometry, potentially boosting the sensitivity and accuracy of Earth-surveying magnetometers by increasing the magnetic-resonance amplitude and decreasing its width. An advantage of the all-optical approach is the absence of crosstalk between nearby sensors when they are used in a gradiometric or array arrangement.- Open Access
A Precise Photometric Ratio via Laser Excitation of the Sodium Layer I: One-photon Excitation Using 342.78 nm Light
The largest uncertainty on measurements of dark energy using type Ia supernovae is presently due to systematics from photometry; specifically to the relative uncertainty on photometry as a function of wavelength in the optical spectrum. We show that a precise constraint on relative photometry between the visible and near-infrared can be achieved in upcoming surveys (such as in LSST at the Vera C. Rubin Observatory) via a mountaintop-located laser source tuned to the 342.78 nm vacuum excitation wavelength of neutral sodium atoms. Using a high-power (500 W) laser modified from laser guide star studies, this excitation will produce an artificial star (which we term a "laser photometric ratio star," or LPRS) of de-excitation light in the mesosphere that is observable from the ground at approximately 20 magnitude (i.e., well within the expected single-image magnitude limit of LSST) at wavelengths in vacuum of 589.16 nm, 589.76 nm, 818.55 nm, and 819.70 nm, with the sum of the numbers of 589.16 nm and 589.76 nm photons produced by this process equal to the sum of the numbers of 818.55 nm and 819.70 nm photons, establishing a precise calibration ratio between, for example, the LSST r and z filters. This technique can thus provide a novel mechanism for establishing a spectrophotometric calibration ratio of unprecedented precision, from above most of the Earth's atmosphere, for upcoming telescopic observations across astronomy and atmospheric physics. This article is the first in a pair of articles on this topic. The second article of the pair describes an alternative technique to achieve a similar, but brighter, LPRS than the technique described in this paper, by using two mountaintop-located lasers, at optical frequencies approximately 4 GHz away from resonances at wavelengths in vacuum of 589.16 nm and 819.71 nm respectively.
Open AccessA Precise Photometric Ratio via Laser Excitation of the Sodium Layer I: One-photon Excitation Using 342.78 nm Light
The largest uncertainty on measurements of dark energy using type Ia supernovae is presently due to systematics from photometry; specifically to the relative uncertainty on photometry as a function of wavelength in the optical spectrum. We show that a precise constraint on relative photometry between the visible and near-infrared can be achieved in upcoming surveys (such as in LSST at the Vera C. Rubin Observatory) via a mountaintop-located laser source tuned to the 342.78 nm vacuum excitation wavelength of neutral sodium atoms. Using a high-power (500 W) laser modified from laser guide star studies, this excitation will produce an artificial star (which we term a "laser photometric ratio star," or LPRS) of de-excitation light in the mesosphere that is observable from the ground at approximately 20 magnitude (i.e., well within the expected single-image magnitude limit of LSST) at wavelengths in vacuum of 589.16 nm, 589.76 nm, 818.55 nm, and 819.70 nm, with the sum of the numbers of 589.16 nm and 589.76 nm photons produced by this process equal to the sum of the numbers of 818.55 nm and 819.70 nm photons, establishing a precise calibration ratio between, for example, the LSST r and z filters. This technique can thus provide a novel mechanism for establishing a spectrophotometric calibration ratio of unprecedented precision, from above most of the Earth's atmosphere, for upcoming telescopic observations across astronomy and atmospheric physics. This article is the first in a pair of articles on this topic. The second article of the pair describes an alternative technique to achieve a similar, but brighter, LPRS than the technique described in this paper, by using two mountaintop-located lasers, at optical frequencies approximately 4 GHz away from resonances at wavelengths in vacuum of 589.16 nm and 819.71 nm respectively.
- Open Access
A Precise Photometric Ratio via Laser Excitation of the Sodium Layer II: Two-photon Excitation Using Lasers Detuned from 589.16 nm and 819.71 nm Resonances
This article is the second in a pair of articles on the topic of the generation of a two-color artificial star (which we term a "laser photometric ratio star," or LPRS) of de-excitation light from neutral sodium atoms in the mesosphere, for use in precision telescopic measurements in astronomy and atmospheric physics, and more specifically for the calibration of measurements of dark energy using type Ia supernovae. The two techniques respectively described in both this and the previous article would each generate an LPRS with a precisely 1:1 ratio of yellow (589/590 nm) photons to near-infrared (819/820 nm) photons produced in the mesosphere. Both techniques would provide novel mechanisms for establishing a spectrophotometric calibration ratio of unprecedented precision, from above most of Earth's atmosphere, for upcoming telescopic observations across astronomy and atmospheric physics. The technique described in this article has the advantage of producing a much brighter (specifically, brighter by approximately a factor of 1000) LPRS, using lower-power (<30 W average power) lasers, than the technique using a single 500 W average power laser described in the first article of this pair. However, the technique described here would require polarization filters to be installed into the telescope camera in order to sufficiently remove laser atmospheric Rayleigh backscatter from telescope images, whereas the technique described in the first article would only require more typical wavelength filters in order to sufficiently remove laser Rayleigh backscatter.
Open AccessA Precise Photometric Ratio via Laser Excitation of the Sodium Layer II: Two-photon Excitation Using Lasers Detuned from 589.16 nm and 819.71 nm Resonances
This article is the second in a pair of articles on the topic of the generation of a two-color artificial star (which we term a "laser photometric ratio star," or LPRS) of de-excitation light from neutral sodium atoms in the mesosphere, for use in precision telescopic measurements in astronomy and atmospheric physics, and more specifically for the calibration of measurements of dark energy using type Ia supernovae. The two techniques respectively described in both this and the previous article would each generate an LPRS with a precisely 1:1 ratio of yellow (589/590 nm) photons to near-infrared (819/820 nm) photons produced in the mesosphere. Both techniques would provide novel mechanisms for establishing a spectrophotometric calibration ratio of unprecedented precision, from above most of Earth's atmosphere, for upcoming telescopic observations across astronomy and atmospheric physics. The technique described in this article has the advantage of producing a much brighter (specifically, brighter by approximately a factor of 1000) LPRS, using lower-power (<30 W average power) lasers, than the technique using a single 500 W average power laser described in the first article of this pair. However, the technique described here would require polarization filters to be installed into the telescope camera in order to sufficiently remove laser atmospheric Rayleigh backscatter from telescope images, whereas the technique described in the first article would only require more typical wavelength filters in order to sufficiently remove laser Rayleigh backscatter.
- 7 June 2021
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 508 (3) , 4399-4411
A precise photometric ratio via laser excitation of the sodium layer – I. One-photon excitation using 342.78 nm light
The largest uncertainty on measurements of dark energy using type Ia supernovae (SNeIa) is presently due to systematics from photometry; specifically to the relative uncertainty on photometry as a function of wavelength in the optical spectrum. We show that a precise constraint on relative photometry between the visible and near-infrared can be achieved at upcoming survey telescopes, such as at the Vera C. Rubin Observatory, via a laser source tuned to the 342.78 nm vacuum excitation wavelength of neutral sodium atoms. Using a high-power laser, this excitation will produce an artificial star, which we term a ‘laser photometric ratio star’ (LPRS) of de-excitation light in the mesosphere at wavelengths in vacuum of 589.16, 589.76, 818.55, and 819.70 nm, with the sum of the numbers of 589.16 and 589.76 nm photons produced by this process equal to the sum of the numbers of 818.55 and 819.70 nm photons, establishing a precise calibration ratio between, for example, the r and |$z$| filters of the LSST camera at the Rubin Observatory. This technique can thus provide a novel mechanism for establishing a spectrophotometric calibration ratio of unprecedented precision for upcoming telescopic observations across astronomy and atmospheric physics; thus greatly improving the performance of upcoming measurements of dark energy parameters using type SNeIa. The second paper of this pair describes an alternative technique to achieve a similar, but brighter, LPRS than the technique described in this paper, by using two lasers near resonances at 589.16 and 819.71 nm, rather than the single 342.78 nm on-resonance laser technique described in this paper.
- 7 June 2021
- Published by Oxford University Press (OUP) in Monthly Notices of the Royal Astronomical Society
- Vol. 508 (3) , 4399-4411
A precise photometric ratio via laser excitation of the sodium layer – I. One-photon excitation using 342.78 nm light
The largest uncertainty on measurements of dark energy using type Ia supernovae (SNeIa) is presently due to systematics from photometry; specifically to the relative uncertainty on photometry as a function of wavelength in the optical spectrum. We show that a precise constraint on relative photometry between the visible and near-infrared can be achieved at upcoming survey telescopes, such as at the Vera C. Rubin Observatory, via a laser source tuned to the 342.78 nm vacuum excitation wavelength of neutral sodium atoms. Using a high-power laser, this excitation will produce an artificial star, which we term a ‘laser photometric ratio star’ (LPRS) of de-excitation light in the mesosphere at wavelengths in vacuum of 589.16, 589.76, 818.55, and 819.70 nm, with the sum of the numbers of 589.16 and 589.76 nm photons produced by this process equal to the sum of the numbers of 818.55 and 819.70 nm photons, establishing a precise calibration ratio between, for example, the r and |$z$| filters of the LSST camera at the Rubin Observatory. This technique can thus provide a novel mechanism for establishing a spectrophotometric calibration ratio of unprecedented precision for upcoming telescopic observations across astronomy and atmospheric physics; thus greatly improving the performance of upcoming measurements of dark energy parameters using type SNeIa. The second paper of this pair describes an alternative technique to achieve a similar, but brighter, LPRS than the technique described in this paper, by using two lasers near resonances at 589.16 and 819.71 nm, rather than the single 342.78 nm on-resonance laser technique described in this paper.