Koray Malcı
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Koray Malcı has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Leonardo Rios-Solis
Department of Biochemical Engineering, Bernard Katz Building University College London London UK
7 shared publications - Tom Ellis
Imperial College London
4 shared publications Nestor Jonguitud-Borrego
Institute for Bioengineering, School of Engineering, University of Edinburgh
3 shared publicationsAlicia Franja Da Silva
Institut Pasteur
1 shared publicationAlistair Elfick
Institute for Bioengineering, School of Engineering, University of Edinburgh, Kings Buildings, EH9 3BF Edinburgh, United Kingdom
1 shared publicationAndreas Andreou
Centre for Synthetic and Systems Biology (SynthSys), University of Edinburgh, Kings Buildings, EH9 3BD Edinburgh, United Kingdom
1 shared publication
Latest Publications
- Open Access
- 21 October 2026
- Published by Cambridge University Press (CUP) in Biotechnology Design
- Vol. 4, e87
ChromoBC: Designing colour and responsiveness in bacterial cellulose
Colour is usually added to materials after fabrication. ChromoBC presents a different approach using bacterial cellulose (BC) that has exceptional mechanical properties and can be microbially produced from low-cost carbon sources. ChromoBC encodes colour and responsiveness into a material that is grown by microbes and whose properties can be genetically programmed. In this work, we demonstrate four colouring modes. In the first approach, the cellulose-producing bacterium, Komagataeibacter rhaeticus , expresses visible proteins that paint the growing cellulose. In the second, K. rhaeticus synthesises eumelanin via an engineered biopathway that forms tuneable grey-to-black materials. As a responsive material, anthocyanin-loaded BC reports environmental pH through instant colour changes. The fourth mode uses a synthetic symbiotic co-culture of bacteria and yeast (Syn-SCOBY) to develop a living, responsive cellulose-based material. The engineered baker’s yeast, Saccharomyces cerevisiae , functionalises cellulose with a secreted enzyme, allowing a chemical input to trigger a colour change. Together, these prototypes demonstrate different forms of BC-based colour-changing materials that can be permanent, tuneable, reversible and responsive. At BioDesign 2026, visitors encountered ChromoBC as a hands-on BC-based material palette, testing pH-responsive material and activating enzyme-based colour changes. This demo positions biologically designed BC as a sustainable and tuneable interface in which biological processes become visible and interactive.
- 21 October 2026
- Published by Cambridge University Press (CUP) in Biotechnology Design
- Vol. 4, e87
Open AccessChromoBC: Designing colour and responsiveness in bacterial cellulose
Colour is usually added to materials after fabrication. ChromoBC presents a different approach using bacterial cellulose (BC) that has exceptional mechanical properties and can be microbially produced from low-cost carbon sources. ChromoBC encodes colour and responsiveness into a material that is grown by microbes and whose properties can be genetically programmed. In this work, we demonstrate four colouring modes. In the first approach, the cellulose-producing bacterium, Komagataeibacter rhaeticus , expresses visible proteins that paint the growing cellulose. In the second, K. rhaeticus synthesises eumelanin via an engineered biopathway that forms tuneable grey-to-black materials. As a responsive material, anthocyanin-loaded BC reports environmental pH through instant colour changes. The fourth mode uses a synthetic symbiotic co-culture of bacteria and yeast (Syn-SCOBY) to develop a living, responsive cellulose-based material. The engineered baker’s yeast, Saccharomyces cerevisiae , functionalises cellulose with a secreted enzyme, allowing a chemical input to trigger a colour change. Together, these prototypes demonstrate different forms of BC-based colour-changing materials that can be permanent, tuneable, reversible and responsive. At BioDesign 2026, visitors encountered ChromoBC as a hands-on BC-based material palette, testing pH-responsive material and activating enzyme-based colour changes. This demo positions biologically designed BC as a sustainable and tuneable interface in which biological processes become visible and interactive.
- Open Access
- 5 February 2026
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
- Vol. 15 (2) , 511-521
Slowpoke: An Automated Golden Gate Cloning Workflow for Opentrons OT-2 and Flex
In synthetic biology, DNA assembly is a routine process where increasing demands for standardization, high-throughput capacity, and error-free execution are driving the development of accessible, automated solutions. Here, we present Slowpoke, a user-friendly and flexible workflow for Golden Gate-based cloning designed for the popular entry-cost, open-source liquid-handling platforms Opentrons OT-2 and Flex. Slowpoke automates the key steps of the DNA assembly process, including cloning, Escherichia coli transformation, plating, and colony PCR, requiring user intervention primarily for colony picking and plate transfers. To further simplify the usage, we developed a free graphical user interface (GUI), available at https://slowpoke.streamlit.app/, which enables rapid protocol generation through simple file uploads. We validated the workflow using two Golden Gate-based toolkits, the MoClo Yeast Toolkit (YTK), and SubtiToolKit (STK). High assembly efficiencies were achieved across platforms for basic transcript unit constructions: 17/17 positive colonies with YTK on OT-2, 11/12 on Flex, and 8/13 with STK on OT-2. High-throughput assemblies were also performed with six parts in Flex using YTK-compatible parts, and 55 out of 57 combinations resulted in correct constructs. These results confirm the robustness and adaptability of the workflow across toolkit complexity and automation platforms. The Slowpoke suite, including code scripts and templates, is freely available at https://github.com/Tom-Ellis-Lab/Slowpoke, offering an accessible and modular solution for automating Golden Gate cloning in synthetic biology laboratories.
- 5 February 2026
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
- Vol. 15 (2) , 511-521
Open AccessSlowpoke: An Automated Golden Gate Cloning Workflow for Opentrons OT-2 and Flex
In synthetic biology, DNA assembly is a routine process where increasing demands for standardization, high-throughput capacity, and error-free execution are driving the development of accessible, automated solutions. Here, we present Slowpoke, a user-friendly and flexible workflow for Golden Gate-based cloning designed for the popular entry-cost, open-source liquid-handling platforms Opentrons OT-2 and Flex. Slowpoke automates the key steps of the DNA assembly process, including cloning, Escherichia coli transformation, plating, and colony PCR, requiring user intervention primarily for colony picking and plate transfers. To further simplify the usage, we developed a free graphical user interface (GUI), available at https://slowpoke.streamlit.app/, which enables rapid protocol generation through simple file uploads. We validated the workflow using two Golden Gate-based toolkits, the MoClo Yeast Toolkit (YTK), and SubtiToolKit (STK). High assembly efficiencies were achieved across platforms for basic transcript unit constructions: 17/17 positive colonies with YTK on OT-2, 11/12 on Flex, and 8/13 with STK on OT-2. High-throughput assemblies were also performed with six parts in Flex using YTK-compatible parts, and 55 out of 57 combinations resulted in correct constructs. These results confirm the robustness and adaptability of the workflow across toolkit complexity and automation platforms. The Slowpoke suite, including code scripts and templates, is freely available at https://github.com/Tom-Ellis-Lab/Slowpoke, offering an accessible and modular solution for automating Golden Gate cloning in synthetic biology laboratories.
- Open Access
- 10 October 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (41) , eadw8278
Bacterially grown living materials with resistant and on-demand functionality
Inspired by naturally occurring biomaterials, autonomously grown engineered living materials (ELMs) feature cell-driven growth and programmable biological functions. However, the “livingness” of cells poses a short life span and low tolerance to harsh conditions, limiting the practical use of such materials. Here, we developed materials with programmable and dormant functionalities, grown from a mixture of Komagataeibacter rhaeticus and Bacillus endospores under engineered medium conditions. K. rhaeticus produces the bacterial cellulose (BC) matrix that integrates Bacillus spores within, whereas the confined spores keep dormant and are resistant to harsh conditions in the environment. Bacillus spores can germinate and confer desired functions to the materials. Modulating the binding affinity of spores to the BC matrix with genetic engineering can improve cell loading and therefore enhance the material functionality. These materials can serve as a versatile on-demand platform for applications as biosensors, biocatalytic materials, and in situ transformation of mechanically robust cellulose-based composites.
- 10 October 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (41) , eadw8278
Open AccessBacterially grown living materials with resistant and on-demand functionality
Inspired by naturally occurring biomaterials, autonomously grown engineered living materials (ELMs) feature cell-driven growth and programmable biological functions. However, the “livingness” of cells poses a short life span and low tolerance to harsh conditions, limiting the practical use of such materials. Here, we developed materials with programmable and dormant functionalities, grown from a mixture of Komagataeibacter rhaeticus and Bacillus endospores under engineered medium conditions. K. rhaeticus produces the bacterial cellulose (BC) matrix that integrates Bacillus spores within, whereas the confined spores keep dormant and are resistant to harsh conditions in the environment. Bacillus spores can germinate and confer desired functions to the materials. Modulating the binding affinity of spores to the BC matrix with genetic engineering can improve cell loading and therefore enhance the material functionality. These materials can serve as a versatile on-demand platform for applications as biosensors, biocatalytic materials, and in situ transformation of mechanically robust cellulose-based composites.
- Open Access
SubtiToolKit - a bioengineering kit for Bacillus subtilis and Gram-positive bacteria
Summary: Building DNA constructs of increasing complexity is key to synthetic biology. Golden Gate methods led to the creation of cloning toolkits - collections of modular standardized DNA parts hosted on hierarchic plasmids, developed for yeast, plants, Gram-negative bacteria, and human cells. However, Gram-positive bacteria have been neglected. Bacillus subtilis is a Gram-positive model organism and a workhorse in the bioindustry. Here, we present the SubtiToolKit, a high- efficiency cloning toolkit for B. subtilis and Gram-positive bacteria. Its design permits DNA constructs for transcriptional units, operons, knock-in and knock-out applications. It contains libraries of promoters, RBSs, fluorescent proteins, protein tags, terminators, genome integration parts, a no-leakage genetic device to control the expression of toxic products during E. coli assembly, and a toolbox for industrially relevant strains of Geobacillus and Parageobacillus as an example of SubtiToolKit versatility for other Gram-positive bacteria and its future perspective as a reference toolkit.
Open AccessSubtiToolKit - a bioengineering kit for Bacillus subtilis and Gram-positive bacteria
Summary: Building DNA constructs of increasing complexity is key to synthetic biology. Golden Gate methods led to the creation of cloning toolkits - collections of modular standardized DNA parts hosted on hierarchic plasmids, developed for yeast, plants, Gram-negative bacteria, and human cells. However, Gram-positive bacteria have been neglected. Bacillus subtilis is a Gram-positive model organism and a workhorse in the bioindustry. Here, we present the SubtiToolKit, a high- efficiency cloning toolkit for B. subtilis and Gram-positive bacteria. Its design permits DNA constructs for transcriptional units, operons, knock-in and knock-out applications. It contains libraries of promoters, RBSs, fluorescent proteins, protein tags, terminators, genome integration parts, a no-leakage genetic device to control the expression of toxic products during E. coli assembly, and a toolbox for industrially relevant strains of Geobacillus and Parageobacillus as an example of SubtiToolKit versatility for other Gram-positive bacteria and its future perspective as a reference toolkit.
- Open Access
- 10 July 2023
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 120 (8) , 2160-2174
The synergetic effect from the combination of different adsorption resins in batch and semi‐continuous cultivations of S. Cerevisiae cell factories to produce acetylated Taxanes precursors of the anticancer drug Taxol
In situ product recovery is an efficient way to intensify bioprocesses as it can perform adsorption of the desired natural products in the cultivation. However, it is common to use only one adsorbent (liquid or solid) to perform the product recovery. For this study, the use of an in situ product recovery method with three combined commercial resins (HP‐20, XAD7HP, and HP‐2MG) with different chemical properties was performed. A new yeast strain of Saccharomyces cerevisiae was engineered using CRISPR Cas9 (strain EJ2) to deliver heterologous expression of oxygenated acetylated taxanes that are precursors of the anticancer drug Taxol ® (paclitaxel). Microscale cultivations using a definitive screening design (DSD) were set to get the best resin combinations and concentrations to retrieve high taxane titers. Once the best resin treatment was selected by the DSD, semi‐continuous cultivation in high throughput microscale was performed to increase the total taxanes yield up to 783 ± 33 mg/L. The best T5α‐yl Acetate yield obtained was up to 95 ± 4 mg/L, the highest titer of this compound ever reported by a heterologous expression. It was also observed that by using a combination of the resins in the cultivation, 8 additional uncharacterized taxanes were found in the gas chromatograms compared to the dodecane overlay method. Lastly, the cell‐waste reactive oxygen species concentrations from the yeast were 1.5‐fold lower in the resin's treatment compared to the control with no adsorbent aid. The possible future implications of this method could be critical for bioprocess intensification, allowing the transition to a semi‐continuous flow bioprocess. Further, this new methodology broadens the use of different organisms for natural product synthesis/discovery benefiting from clear bioprocess intensification advantages.
- 10 July 2023
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 120 (8) , 2160-2174
Open AccessThe synergetic effect from the combination of different adsorption resins in batch and semi‐continuous cultivations of S. Cerevisiae cell factories to produce acetylated Taxanes precursors of the anticancer drug Taxol
In situ product recovery is an efficient way to intensify bioprocesses as it can perform adsorption of the desired natural products in the cultivation. However, it is common to use only one adsorbent (liquid or solid) to perform the product recovery. For this study, the use of an in situ product recovery method with three combined commercial resins (HP‐20, XAD7HP, and HP‐2MG) with different chemical properties was performed. A new yeast strain of Saccharomyces cerevisiae was engineered using CRISPR Cas9 (strain EJ2) to deliver heterologous expression of oxygenated acetylated taxanes that are precursors of the anticancer drug Taxol ® (paclitaxel). Microscale cultivations using a definitive screening design (DSD) were set to get the best resin combinations and concentrations to retrieve high taxane titers. Once the best resin treatment was selected by the DSD, semi‐continuous cultivation in high throughput microscale was performed to increase the total taxanes yield up to 783 ± 33 mg/L. The best T5α‐yl Acetate yield obtained was up to 95 ± 4 mg/L, the highest titer of this compound ever reported by a heterologous expression. It was also observed that by using a combination of the resins in the cultivation, 8 additional uncharacterized taxanes were found in the gas chromatograms compared to the dodecane overlay method. Lastly, the cell‐waste reactive oxygen species concentrations from the yeast were 1.5‐fold lower in the resin's treatment compared to the control with no adsorbent aid. The possible future implications of this method could be critical for bioprocess intensification, allowing the transition to a semi‐continuous flow bioprocess. Further, this new methodology broadens the use of different organisms for natural product synthesis/discovery benefiting from clear bioprocess intensification advantages.
- Open Access
Improved Production of Taxol® Precursors in S. cerevisiae using Combinatorial in silico Design and Metabolic Engineering
Integrated metabolic engineering approaches combining system and synthetic biology tools allow the efficient designing of microbial cell factories to synthesize high-value products. In the present study, in silico design algorithms were used on the latest yeast genome-scale model 8.5.0 to predict potential genomic modifications that could enhance the production of early-step Taxol® in previously engineered Saccharomyces cerevisiae cells. The solution set containing genomic modification candidates was narrowed down by employing the COnstraints Based Reconstruction and Analysis (COBRA) methods. 17 genomic modifications consisting of nine gene deletions and eight gene overexpression were screened using wet-lab studies to determine whether these modifications can increase the production yield of taxadiene, the first metabolite in the Taxol® through the mevalonate pathway. Depending on the cultivation condition, most of the single genomic modifications resulted in higher taxadiene production. The best-performing strain, named KM32, contained four overexpressed genes, ILV2, TRR1, ADE13 and ECM31 , from the branched-chain amino acid biosynthesis, thioredoxin system, de novo purine synthesis, and the pantothenate pathway, respectively. Using KM32, taxadiene production was increased by 50%, reaching 215 mg/L of taxadiene. The engineered strain also produced 43.65 mg/L of taxa-4(20),11-dien-5α-ol (T5α-ol), and 26.2 mg/L of taxa-4(20),11-dien-5-α-yl acetate (T5αAc) which are the highest productions of these early-step Taxol® metabolites reported until now in S. cerevisiae . The findings of this study highlight that the use of computational and integrated approaches can ensure determining promising modifications that are difficult to estimate intuitively to develop yeast cell factories.
Open AccessImproved Production of Taxol® Precursors in S. cerevisiae using Combinatorial in silico Design and Metabolic Engineering
Integrated metabolic engineering approaches combining system and synthetic biology tools allow the efficient designing of microbial cell factories to synthesize high-value products. In the present study, in silico design algorithms were used on the latest yeast genome-scale model 8.5.0 to predict potential genomic modifications that could enhance the production of early-step Taxol® in previously engineered Saccharomyces cerevisiae cells. The solution set containing genomic modification candidates was narrowed down by employing the COnstraints Based Reconstruction and Analysis (COBRA) methods. 17 genomic modifications consisting of nine gene deletions and eight gene overexpression were screened using wet-lab studies to determine whether these modifications can increase the production yield of taxadiene, the first metabolite in the Taxol® through the mevalonate pathway. Depending on the cultivation condition, most of the single genomic modifications resulted in higher taxadiene production. The best-performing strain, named KM32, contained four overexpressed genes, ILV2, TRR1, ADE13 and ECM31 , from the branched-chain amino acid biosynthesis, thioredoxin system, de novo purine synthesis, and the pantothenate pathway, respectively. Using KM32, taxadiene production was increased by 50%, reaching 215 mg/L of taxadiene. The engineered strain also produced 43.65 mg/L of taxa-4(20),11-dien-5α-ol (T5α-ol), and 26.2 mg/L of taxa-4(20),11-dien-5-α-yl acetate (T5αAc) which are the highest productions of these early-step Taxol® metabolites reported until now in S. cerevisiae . The findings of this study highlight that the use of computational and integrated approaches can ensure determining promising modifications that are difficult to estimate intuitively to develop yeast cell factories.
- Open Access
- 17 October 2022
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
- Vol. 11 (11) , 3629-3643
ACtivE: Assembly and CRISPR-Targeted in Vivo Editing for Yeast Genome Engineering Using Minimum Reagents and Time
- 17 October 2022
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
- Vol. 11 (11) , 3629-3643
Open AccessACtivE: Assembly and CRISPR-Targeted in Vivo Editing for Yeast Genome Engineering Using Minimum Reagents and Time
- Open Access
- 8 August 2022
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
- Vol. 11 (8) , 2527-2547
Standardization of Synthetic Biology Tools and Assembly Methods for Saccharomyces cerevisiae and Emerging Yeast Species
As redesigning organisms using engineering principles is one of the purposes of synthetic biology (SynBio), the standardization of experimental methods and DNA parts is becoming increasingly a necessity. The synthetic biology community focusing on the engineering of Saccharomyces cerevisiae has been in the foreground in this area, conceiving several well-characterized SynBio toolkits widely adopted by the community. In this review, the molecular methods and toolkits developed for S. cerevisiae are discussed in terms of their contributions to the required standardization efforts. In addition, the toolkits designed for emerging nonconventional yeast species including Yarrowia lipolytica, Komagataella phaffii, and Kluyveromyces marxianus are also reviewed. Without a doubt, the characterized DNA parts combined with the standardized assembly strategies highlighted in these toolkits have greatly contributed to the rapid development of many metabolic engineering and diagnostics applications among others. Despite the growing capacity in deploying synthetic biology for common yeast genome engineering works, the yeast community has a long journey to go to exploit it in more sophisticated and delicate applications like bioautomation.
- 8 August 2022
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
- Vol. 11 (8) , 2527-2547
Open AccessStandardization of Synthetic Biology Tools and Assembly Methods for Saccharomyces cerevisiae and Emerging Yeast Species
As redesigning organisms using engineering principles is one of the purposes of synthetic biology (SynBio), the standardization of experimental methods and DNA parts is becoming increasingly a necessity. The synthetic biology community focusing on the engineering of Saccharomyces cerevisiae has been in the foreground in this area, conceiving several well-characterized SynBio toolkits widely adopted by the community. In this review, the molecular methods and toolkits developed for S. cerevisiae are discussed in terms of their contributions to the required standardization efforts. In addition, the toolkits designed for emerging nonconventional yeast species including Yarrowia lipolytica, Komagataella phaffii, and Kluyveromyces marxianus are also reviewed. Without a doubt, the characterized DNA parts combined with the standardized assembly strategies highlighted in these toolkits have greatly contributed to the rapid development of many metabolic engineering and diagnostics applications among others. Despite the growing capacity in deploying synthetic biology for common yeast genome engineering works, the yeast community has a long journey to go to exploit it in more sophisticated and delicate applications like bioautomation.
- Open Access
ACtivE: Assembly and CRISPR-targeted in vivo Editing for Yeast Genome Engineering Using Minimum Reagents and Time
Among the numerous genetic tools developed for yeast, CRISPR/Cas system has been a widely used genome editing method thanks to its sophistication. However, CRISPR methods for yeast generally rely on pre-assembled DNAs and extra cloning steps to deliver gRNA, Cas protein, and donor DNA. These laborious steps might hinder its usefulness. Here, we propose a convenient, rapid, standardizable CRISPR method, named Assembly and CRISPR-targeted in vivo Editing (ACtivE), which only relies on in vivo assembly of linear DNA fragments for both plasmid and donor DNA construction. Thus, depending on the user’s need, these parts can be easily selected and combined from a repository, serving as a toolkit for rapid genome editing without any expensive reagent. The toolkit contains verified linear DNA fragments, which are easy to store, share and transport at room temperature, drastically reducing expensive shipping costs and assembly time. After optimizing this technique, eight ARS-close loci in the yeast genome were also characterized in terms of integration and gene expression efficiencies and the impacts of the disruptions of these regions on cell fitness. The flexibility and multiplexing capacity of the ACtivE were shown by constructing β-carotene pathway. In only a few days, > 80% integration efficiency for single gene integration and > 50% integration efficiency for triplex integration were achieved from scratch without using in vitro DNA assembly methods, restriction enzymes, or extra cloning steps. This study presents a standardizable method to be readily employed to accelerate yeast genome engineering and provides well-defined genomic location alternatives for yeast synthetic biology and metabolic engineering purposes.
Open AccessACtivE: Assembly and CRISPR-targeted in vivo Editing for Yeast Genome Engineering Using Minimum Reagents and Time
Among the numerous genetic tools developed for yeast, CRISPR/Cas system has been a widely used genome editing method thanks to its sophistication. However, CRISPR methods for yeast generally rely on pre-assembled DNAs and extra cloning steps to deliver gRNA, Cas protein, and donor DNA. These laborious steps might hinder its usefulness. Here, we propose a convenient, rapid, standardizable CRISPR method, named Assembly and CRISPR-targeted in vivo Editing (ACtivE), which only relies on in vivo assembly of linear DNA fragments for both plasmid and donor DNA construction. Thus, depending on the user’s need, these parts can be easily selected and combined from a repository, serving as a toolkit for rapid genome editing without any expensive reagent. The toolkit contains verified linear DNA fragments, which are easy to store, share and transport at room temperature, drastically reducing expensive shipping costs and assembly time. After optimizing this technique, eight ARS-close loci in the yeast genome were also characterized in terms of integration and gene expression efficiencies and the impacts of the disruptions of these regions on cell fitness. The flexibility and multiplexing capacity of the ACtivE were shown by constructing β-carotene pathway. In only a few days, > 80% integration efficiency for single gene integration and > 50% integration efficiency for triplex integration were achieved from scratch without using in vitro DNA assembly methods, restriction enzymes, or extra cloning steps. This study presents a standardizable method to be readily employed to accelerate yeast genome engineering and provides well-defined genomic location alternatives for yeast synthetic biology and metabolic engineering purposes.
- Open Access
- 1 April 2022
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
- Vol. 11 (4) , 1555-1567
Rational Design of CRISPR/Cas12a-RPA Based One-Pot COVID-19 Detection with Design of Experiments
Simple and effective molecular diagnostic methods have gained importance due to the devastating effects of the COVID-19 pandemic. Various isothermal one-pot COVID-19 detection methods have been proposed as favorable alternatives to standard RT-qPCR methods as they do not require sophisticated and/or expensive devices. However, as one-pot reactions are highly complex with a large number of variables, determining the optimum conditions to maximize sensitivity while minimizing diagnostic cost can be cumbersome. Here, statistical design of experiments (DoE) was employed to accelerate the development and optimization of a CRISPR/Cas12a-RPA-based one-pot detection method for the first time. Using a definitive screening design, factors with a significant effect on performance were elucidated and optimized, facilitating the detection of two copies/μL of full-length SARS-CoV-2 (COVID-19) genome using simple instrumentation. The screening revealed that the addition of a reverse transcription buffer and an RNase inhibitor, components generally omitted in one-pot reactions, improved performance significantly, and optimization of reverse transcription had a critical impact on the method’s sensitivity. This strategic method was also applied in a second approach involving a DNA sequence of the N gene from the COVID-19 genome. The slight differences in optimal conditions for the methods using RNA and DNA templates highlight the importance of reaction-specific optimization in ensuring robust and efficient diagnostic performance. The proposed detection method is automation-compatible, rendering it suitable for high-throughput testing. This study demonstrated the benefits of DoE for the optimization of complex one-pot molecular diagnostics methods to increase detection sensitivity.
- 1 April 2022
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
- Vol. 11 (4) , 1555-1567
Open AccessRational Design of CRISPR/Cas12a-RPA Based One-Pot COVID-19 Detection with Design of Experiments
Simple and effective molecular diagnostic methods have gained importance due to the devastating effects of the COVID-19 pandemic. Various isothermal one-pot COVID-19 detection methods have been proposed as favorable alternatives to standard RT-qPCR methods as they do not require sophisticated and/or expensive devices. However, as one-pot reactions are highly complex with a large number of variables, determining the optimum conditions to maximize sensitivity while minimizing diagnostic cost can be cumbersome. Here, statistical design of experiments (DoE) was employed to accelerate the development and optimization of a CRISPR/Cas12a-RPA-based one-pot detection method for the first time. Using a definitive screening design, factors with a significant effect on performance were elucidated and optimized, facilitating the detection of two copies/μL of full-length SARS-CoV-2 (COVID-19) genome using simple instrumentation. The screening revealed that the addition of a reverse transcription buffer and an RNase inhibitor, components generally omitted in one-pot reactions, improved performance significantly, and optimization of reverse transcription had a critical impact on the method’s sensitivity. This strategic method was also applied in a second approach involving a DNA sequence of the N gene from the COVID-19 genome. The slight differences in optimal conditions for the methods using RNA and DNA templates highlight the importance of reaction-specific optimization in ensuring robust and efficient diagnostic performance. The proposed detection method is automation-compatible, rendering it suitable for high-throughput testing. This study demonstrated the benefits of DoE for the optimization of complex one-pot molecular diagnostics methods to increase detection sensitivity.