Mehmet Erman Mert
Mehmet Erman Mert has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Başak Doğru Mert
Adana Alparslan Turkes Bilim ve Teknoloji Universitesi
18 shared publications - Goncagül Aksaray
Cukurova Universitesi
5 shared publications Başak Doğru Mert
Energy Systems Engineering Department, Engineering Faculty, Adana Alparslan Türkeş Science and Technology University, Adana, Turkey
4 shared publications- Cihat Hi̇lal
Diyarbakır Bölge Kriminal Polis Laboratuvarı
3 shared publications - Fırat Ekinci
Adana Alparslan Türkeş Science and Technology University
3 shared publications Gülfeza Kardaş
3 shared publications
Latest Publications
- Open Access
- 15 October 2026
- Published by Springer Nature in Journal of Coatings Technology and Research
- p. 1-15
Multifunctional UV-curable carbon nanofiber coatings on hemp/viscose nonwovens: electrostatic dissipation, thermal stability, and electromagnetic shielding behavior
Natural fiber-reinforced composites are widely studied as sustainable alternatives to synthetic materials due to their lightweight and renewable nature. In this study, a hemp/viscose spunlace nonwoven was coated with a UV-curable elastomeric resin containing carbon nanofibers (CNF) and acid-activated carbon nanofibers (ACNF) at 0.75, 1.5, and 3 wt%. Acid activation introduced oxygen-containing functional groups, improving nanofiller dispersion and interfacial adhesion. The composites were characterized by FTIR, RAMAN, TGA, XRD, contact angle, surface resistivity, and EMI shielding effectiveness (SE) analyses. Microscopy confirmed successful nanofiller incorporation, particularly in ACNF-modified samples. Surface resistivity results showed a concentration-dependent decrease in resistivity, indicating a shift toward electrostatic dissipative behavior. ACNF samples exhibited lower resistivity than untreated CNF systems. Thermal analysis revealed enhanced thermal stability and higher char residue in reinforced composites. Although measurable attenuation was observed, the SE values (<5 dB) indicate that a fully developed conductive network was not established within the investigated filler range. These findings suggest that the current formulations primarily provide electrostatic dissipation rather than effective electromagnetic shielding. Overall, UV-curable CNF/ACNF coatings improved surface functionality and thermal performance, but low filler contents limited electromagnetic shielding efficiency.
- 15 October 2026
- Published by Springer Nature in Journal of Coatings Technology and Research
- p. 1-15
Open AccessMultifunctional UV-curable carbon nanofiber coatings on hemp/viscose nonwovens: electrostatic dissipation, thermal stability, and electromagnetic shielding behavior
Natural fiber-reinforced composites are widely studied as sustainable alternatives to synthetic materials due to their lightweight and renewable nature. In this study, a hemp/viscose spunlace nonwoven was coated with a UV-curable elastomeric resin containing carbon nanofibers (CNF) and acid-activated carbon nanofibers (ACNF) at 0.75, 1.5, and 3 wt%. Acid activation introduced oxygen-containing functional groups, improving nanofiller dispersion and interfacial adhesion. The composites were characterized by FTIR, RAMAN, TGA, XRD, contact angle, surface resistivity, and EMI shielding effectiveness (SE) analyses. Microscopy confirmed successful nanofiller incorporation, particularly in ACNF-modified samples. Surface resistivity results showed a concentration-dependent decrease in resistivity, indicating a shift toward electrostatic dissipative behavior. ACNF samples exhibited lower resistivity than untreated CNF systems. Thermal analysis revealed enhanced thermal stability and higher char residue in reinforced composites. Although measurable attenuation was observed, the SE values (<5 dB) indicate that a fully developed conductive network was not established within the investigated filler range. These findings suggest that the current formulations primarily provide electrostatic dissipation rather than effective electromagnetic shielding. Overall, UV-curable CNF/ACNF coatings improved surface functionality and thermal performance, but low filler contents limited electromagnetic shielding efficiency.
- 1 July 2026
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 41 (2) , 309-319
Design and Performance Analysis of Tulip-Shaped Microstrip Antenna on Flexible Substrates with Chemical Modifications
This study introduces a novel tulip-shaped microstrip antenna (TSMA), fabricated on a chemically analyzed substrate with versatile applications. The antenna design is implemented using Computer Simulation Tool (CST) software, considering various substrate materials. Performance analyses, including reflection coefficients and voltage standing wave ratio graphs, are presented for each material. The antennas exhibit diverse characteristics, with some featuring wide bandwidths, others narrow bands, and some offering dual or tri-band resonances—tailored for specific application areas. The production costs remain reasonable, leveraging the benefits of chemical processes and material flexibility. Simulation results validate the study's findings, highlighting the antennas' simple, compact structures and cost-effectiveness, making them suitable for tailored RF applications.
- 1 July 2026
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 41 (2) , 309-319
Design and Performance Analysis of Tulip-Shaped Microstrip Antenna on Flexible Substrates with Chemical Modifications
This study introduces a novel tulip-shaped microstrip antenna (TSMA), fabricated on a chemically analyzed substrate with versatile applications. The antenna design is implemented using Computer Simulation Tool (CST) software, considering various substrate materials. Performance analyses, including reflection coefficients and voltage standing wave ratio graphs, are presented for each material. The antennas exhibit diverse characteristics, with some featuring wide bandwidths, others narrow bands, and some offering dual or tri-band resonances—tailored for specific application areas. The production costs remain reasonable, leveraging the benefits of chemical processes and material flexibility. Simulation results validate the study's findings, highlighting the antennas' simple, compact structures and cost-effectiveness, making them suitable for tailored RF applications.
- 2 April 2026
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 11 (5) , 4797-4816
Mixed-mode fracture of U-notched FDM-printed polycarbonate/carbon nanofiber nanocomposites
- 2 April 2026
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 11 (5) , 4797-4816
Mixed-mode fracture of U-notched FDM-printed polycarbonate/carbon nanofiber nanocomposites
- 4 September 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 172
Sustainable energy solutions: 3D printed PLA-NiMo@Ag for green hydrogen production
- 4 September 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 172
Sustainable energy solutions: 3D printed PLA-NiMo@Ag for green hydrogen production
- Open Access
- 31 July 2025
- Published by Duzce Universitesi Bilim ve Teknoloji Dergisi in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 13 (3) , 1057-1071
PV-Assisted Hydrogen Production Technology for Off-Grid Renewable Energy Generation in Adana, Turkey
This review paper proposes the use of PV-assisted hydrogen production technology in Adana, Turkey, as a viable and sustainable method to off-grid renewable energy generation. This integration aims to increase hydrogen production, supporting energy independence, environmental sustainability, and economic development in remote areas by utilizing the region's suitable solar resources and ideal climate. This technology, which combines modern electrolysis technologies with locally available renewable energy sources, can make a significant contribution to the creation of a cleaner, more durable energy infrastructure. The findings indicate that PV-assisted hydrogen production is a promising alternative for decentralized energy demands, supporting sustainable development and lowering reliance on fossil fuels in off-grid areas.
- 31 July 2025
- Published by Duzce Universitesi Bilim ve Teknoloji Dergisi in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 13 (3) , 1057-1071
Open AccessPV-Assisted Hydrogen Production Technology for Off-Grid Renewable Energy Generation in Adana, Turkey
This review paper proposes the use of PV-assisted hydrogen production technology in Adana, Turkey, as a viable and sustainable method to off-grid renewable energy generation. This integration aims to increase hydrogen production, supporting energy independence, environmental sustainability, and economic development in remote areas by utilizing the region's suitable solar resources and ideal climate. This technology, which combines modern electrolysis technologies with locally available renewable energy sources, can make a significant contribution to the creation of a cleaner, more durable energy infrastructure. The findings indicate that PV-assisted hydrogen production is a promising alternative for decentralized energy demands, supporting sustainable development and lowering reliance on fossil fuels in off-grid areas.
- 29 July 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (11) , 13793-13806
Hydropower-Assisted Alkaline Electrolysis with NiCo-Modified Electrodes Produced by Additive Manufacturing for Enhanced Hydrogen Evolution Reaction
- 29 July 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (11) , 13793-13806
Hydropower-Assisted Alkaline Electrolysis with NiCo-Modified Electrodes Produced by Additive Manufacturing for Enhanced Hydrogen Evolution Reaction
- Open Access
- 29 July 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 27567
Lignocellulosic biomass based catalysis for hydrogen generation effect of pistachio shells and Raney nickel in NaBH4 hydrolysis
Pistachio shell, which has a layered, porous structure, is a natural polymer composed of lignin, hemicellulose and cellulose. This study investigates the catalytic performance of a composite catalyst made from pistachio shell (PS) and Raney Ni (Ra-Ni) in sodium borohydride (NaBH4) hydrolysis for hydrogen production. Characterization techniques, ATR-FTIR, XRD, TGA, and FESEM-EDX, were utilized to analyze the morphology and structure of the catalyst. To assess catalytic performance, the rate of H2 generation was measured using a water displacement method at 298 K. A 0.15 g sample of catalyst, composed of 1:1 weight ratio of Ra-Ni and ball milled PS, was mixed with 100 mL of water and 1 wt% NaBH4. H2 production rate was monitored, providing insights into the catalyst's efficiency and effectiveness. Results demonstrated that the Ra-Ni and PS composite exhibited high catalytic activity, with H2 generation rates of 409 mL g- 1 catalyst after 450 s and 430 mL g- 1 catalyst after 900 s, respectively. Activation energy of Ra-Ni-PS was 23.30 kJ mol- 1. The produced composite has promising potential for H2 production applications via NaBH4 hydrolysis.
- 29 July 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 27567
Open AccessLignocellulosic biomass based catalysis for hydrogen generation effect of pistachio shells and Raney nickel in NaBH4 hydrolysis
Pistachio shell, which has a layered, porous structure, is a natural polymer composed of lignin, hemicellulose and cellulose. This study investigates the catalytic performance of a composite catalyst made from pistachio shell (PS) and Raney Ni (Ra-Ni) in sodium borohydride (NaBH4) hydrolysis for hydrogen production. Characterization techniques, ATR-FTIR, XRD, TGA, and FESEM-EDX, were utilized to analyze the morphology and structure of the catalyst. To assess catalytic performance, the rate of H2 generation was measured using a water displacement method at 298 K. A 0.15 g sample of catalyst, composed of 1:1 weight ratio of Ra-Ni and ball milled PS, was mixed with 100 mL of water and 1 wt% NaBH4. H2 production rate was monitored, providing insights into the catalyst's efficiency and effectiveness. Results demonstrated that the Ra-Ni and PS composite exhibited high catalytic activity, with H2 generation rates of 409 mL g- 1 catalyst after 450 s and 430 mL g- 1 catalyst after 900 s, respectively. Activation energy of Ra-Ni-PS was 23.30 kJ mol- 1. The produced composite has promising potential for H2 production applications via NaBH4 hydrolysis.
- Open Access
- 26 March 2025
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 40 (1) , 111-126
Performance Analysis of Additive Manufacturing of Electrodes via Selective Laser Sintering for Green Hydrogen Production
Standard electrodes have limitations in design flexibility, production time, cost, material waste, and customization. Additive manufacturing overcomes these barriers, offering an efficient, cost-effective, and environmentally friendly approach to manufacturing electrochemical components. This study explores the usability of selective laser sintering for producing electrodes for green hydrogen production, focusing on emergency applications and prototype development. A honeycomb-structured metal cathode for alkaline electrolysis is 3D-printed and tested for tensile strength. Electrochemical methods, including cyclic voltammetry, linear sweep voltammetry, and chronoamperometry, evaluate its catalytic performance against graphite and platinum electrodes. For a 30-minute electrolysis period, the volume of hydrogen gas values for selective laser sintering manufactured cathode electrodes @ 2.4, 2.7, and 3 V are 10.5, 19.75, and 28.5 mL, respectively. Results show superior performance compared to literature. Additionally, wind turbine models (NACA12, NACA15, NACA18) are analyzed for hydrogen production efficiency, with NACA12 proving most effective at moderate to high wind speeds.
- 26 March 2025
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 40 (1) , 111-126
Open AccessPerformance Analysis of Additive Manufacturing of Electrodes via Selective Laser Sintering for Green Hydrogen Production
Standard electrodes have limitations in design flexibility, production time, cost, material waste, and customization. Additive manufacturing overcomes these barriers, offering an efficient, cost-effective, and environmentally friendly approach to manufacturing electrochemical components. This study explores the usability of selective laser sintering for producing electrodes for green hydrogen production, focusing on emergency applications and prototype development. A honeycomb-structured metal cathode for alkaline electrolysis is 3D-printed and tested for tensile strength. Electrochemical methods, including cyclic voltammetry, linear sweep voltammetry, and chronoamperometry, evaluate its catalytic performance against graphite and platinum electrodes. For a 30-minute electrolysis period, the volume of hydrogen gas values for selective laser sintering manufactured cathode electrodes @ 2.4, 2.7, and 3 V are 10.5, 19.75, and 28.5 mL, respectively. Results show superior performance compared to literature. Additionally, wind turbine models (NACA12, NACA15, NACA18) are analyzed for hydrogen production efficiency, with NACA12 proving most effective at moderate to high wind speeds.
- 7 February 2025
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 39 (10) , 1624-1640
The corrosion inhibition performance of expired Beloc drug: theoretical and experimental study
- 7 February 2025
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 39 (10) , 1624-1640
The corrosion inhibition performance of expired Beloc drug: theoretical and experimental study