Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ibadur Rahman has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of high shear-dispersed nano-alumina on concrete strength, durability, and microstructure

    by Ibadur Rahman, Nirendra Dev, Mohammed Arif, Sagar Paruthi, Afzal Husain Khan, Faiz Noor Khan Yusufi, M. Masroor Alam

    This study investigates the effectiveness of high shear dispersion (HSD) as a scalable and energy-efficient technique for incorporating nano-alumina (NA) into conventional M40-grade concrete, addressing a key limitation of nanoparticle agglomeration commonly reported in nano-modified cementitious systems. Nano-alumina was incorporated at dosages of 0.5%, 1.0%, and 1.5% by weight of cement, and its influence on mechanical performance, durability, microstructural refinement, and statistical reliability was systematically evaluated. Results demonstrate that HSD enables uniform NA dispersion in the range of 10–30 nm, leading to pronounced improvements in concrete performance. At 28 days, the compressive, split tensile, and flexural strengths increased by 26.99%, 37.5%, and 48.14%, respectively, for concrete containing 1.5% NA, compared to the control mix. Long-term curing further enhanced performance, with compressive strength reaching 74.04 MPa at 180 days. Durability assessments revealed improved resistance to chemical attack (NaCl, HCl, and H2SO4), freeze–thaw cycles, and elevated temperatures up to 400 °C, attributed to refined pore structure and reduced permeability. Microstructural analysis using SEM–EDX confirmed significant matrix densification, reduction in average void size by approximately 65%, narrowing of the interfacial transition zone, and the formation of secondary calcium–alumina–silicate–hydrate (C–A–S–H) gel. In addition, multivariable regression and Weibull statistical analyses demonstrated enhanced strength predictability and reduced variability with increasing NA dosage. Overall, this study establishes high shear dispersion as a practical and field-compatible alternative to ultrasonication, enabling reliable nano-alumina integration for the development of high-performance and durable concrete systems.


  • Open Access

    Effects of Chemicals Exposure on the Durability of Geopolymer Concrete Incorporated with Silica Fumes and Nano-Sized Silica at Varying Curing Temperatures

    by Sagar Paruthi, Ibadur Rahman, Asif Husain, Mohd Abul Hasan, Afzal Husain Khan

    Durable concrete significantly reduces the spalling caused by chemical damage. The objective of current research is to substitute cement with supplementary such as fly ash (FA), ground granulated blast furnace slag (GGBS), and alccofine (AF). Additionally, the impact of nano-silica (NS) and silica fumes (SF) on the GPC durability when cured at various temperatures has been attempted. In order to perform this, GPC samples were produced by combining NS and SF at proportions of 0.5% NS + 5% SF, 1% NS + 10% SF, and 1.5% NS + 15% SF, and then cured at temperatures of 27 °C, 60 °C, 90 °C, and 120 °C, respectively. In this research, all concrete specimens were continuously immersed for twelve weeks under four different chemicals, i.e., HCl (2%), H2SO4 (2%), NaCl (6%), and Na2SO4 (6%). The influence of chemical attack on the qualities of concrete was examined by evaluating the water absorption, sorptivity, loss of mass, and loss of GPC strength. The durability aspect is also studied by visual appearance and mass loss under harmful chemical attack. The combination of GPC with integrated NS and SF affords great resistance against chemical attacks. The percentages of these two components are 1.5% and 15%. For GPC specimens, when cured at 90 °C, the resultant strength is found at its maximum.


  • Open Access

    Improvements in the Engineering Properties of Cementitious Composites Using Nano-Sized Cement and Nano-Sized Additives

    by Ibadur Rahman, Priyanka Singh, Nirendra Dev, Mohammed Arif, Faiz Noor Khan Yusufi, Ameer Azam, M. Masroor Alam, Sandeep Singh, Jasgurpreet Singh Chohan, Raman Kumar, et al.

    The findings of an extensive experimental research study on the usage of nano-sized cement powder and other additives combined to form cement–fine-aggregate matrices are discussed in this work. In the laboratory, dry and wet methods were used to create nano-sized cements. The influence of these nano-sized cements, nano-silica fumes, and nano-fly ash in different proportions was studied to the evaluate the engineering properties of the cement–fine-aggregate matrices concerning normal-sized, commercially available cement. The composites produced with modified cement–fine-aggregate matrices were subjected to microscopic-scale analyses using a petrographic microscope, a Scanning Electron Microscope (SEM), and a Transmission Electron Microscope (TEM). These studies unravelled the placement and behaviour of additives in controlling the engineering properties of the mix. The test results indicated that nano-cement and nano-sized particles improved the engineering properties of the hardened cement matrix. The wet-ground nano-cement showed the best result, 40 MPa 28th-day compressive strength, without mixing any additive compared with ordinary and dry-ground cements. The mix containing 50:50 normal and wet-ground cement exhibited 37.20 MPa 28th-day compressive strength. All other mixes with nano-sized dry cement, silica fume, and fly ash with different permutations and combinations gave better results than the normal-cement–fine-aggregate mix. The petrographic studies and the Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM) analyses further validated the above findings. Statistical analyses and techniques such as correlation and stepwise multiple regression analysis were conducted to compose a predictive equation to calculate the 28th-day compressive strength. In addition to these methods, a repeated measures Analysis of Variance (ANOVA) was also implemented to analyse the statistically significant differences among three differently timed strength readings.


  • Top Cited Papers
    Open Access

    Geopolymer Concrete: A Material for Sustainable Development in Indian Construction Industries

    by Manvendra Verma, Nirendra Dev, Ibadur Rahman, Mayank Nigam, Mohd. Ahmed, Javed Mallick

    Geopolymer concrete (GPC) is a new material in the construction industry, with different chemical compositions and reactions involved in a binding material. The pozzolanic materials (industrial waste like fly ash, ground granulated blast furnace slag (GGBFS), and rice husk ash), which contain high silica and alumina, work as binding materials in the mix. Geopolymer concrete is economical, low energy consumption, thermally stable, easily workable, eco-friendly, cementless, and durable. GPC reduces carbon footprints by using industrial solid waste like slag, fly ash, and rice husk ash. Around one tonne of carbon dioxide emissions produced one tonne of cement that directly polluted the environment and increased the world’s temperature by increasing greenhouse gas production. For sustainable construction, GPC reduces the use of cement and finds the alternative of cement for the material’s binding property. So, the geopolymer concrete is an alternative to Portland cement concrete and it is a potential material having large commercial value and for sustainable development in Indian construction industries. The comprehensive survey of the literature shows that geopolymer concrete is a perfect alternative to Portland cement concrete because it has better physical, mechanical, and durable properties. Geopolymer concrete is highly resistant to acid, sulphate, and salt attack. Geopolymer concrete plays a vital role in the construction industry through its use in bridge construction, high-rise buildings, highways, tunnels, dams, and hydraulic structures, because of its high performance. It can be concluded from the review that sustainable development is achieved by employing geopolymers in Indian construction industries, because it results in lower CO2 emissions, optimum utilization of natural resources, utilization of waste materials, is more cost-effective in long life infrastructure construction, and, socially, in financial benefits and employment generation.


  • Study on the Effects of CNT and Nano-graphene in Clayey Soil of Aligarh City of Northern India

    by Jibran Qadri, Mohd. Aleem Farshori, Mohd Asim Khan, M. Nizamuddin, Ibadur Rahman