Khairudin Nurulhuda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Khairudin Nurulhuda has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Zed Zulkafli
Department of Civil Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400, Serdang, Selangor, Malaysia
4 shared publications Hasfalina Che Man
3 shared publicationsAdibah Mohd Amin
Department of Land Management, Faculty of Agriculture, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
2 shared publications- Balqis Mohamed Rehan
Universiti Putra Malaysia
2 shared publications - Diyana Jamaludin
Smart Farming Technology Center, Dept. of Biological and Agricultural Engineering, Faculty of Engineering, Univ. Putra Malaysia, 43400, UPM Serdang, Malaysia
2 shared publications - Farrah Melissa Muharam
Department of Agriculture Technology, Faculty of Agriculture, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia
2 shared publications
Latest Publications
- 14 May 2026
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 20 (2) , 124-131
EFFECT OF LIGHT-EMITTING DIODE WAVELENGTHS ON THE QUALITY-INDEX OF MARKET-DISPLAYED TOMATOES
This study investigated the effects of light-emitting diode (LED) wavelengths as a postharvest pre-treatment to improve the physiological quality index and delay the deterioration of market-displayed tomatoes (Solanum lycopersicum). Tomatoes are highly perishable climacteric fruits characterized by rapid developmental and ripening processes, which cause significant economic losses within the postharvest supply chain, particularly at wholesaler and retailer outlets. To address this problem, fresh tomato samples were subjected to a 5-day pre-treatment phase inside a cooling chamber at a temperature of 5 degrees Celsius and 90% relative humidity under a 16/8-hour light/dark photoperiod. The administered treatments included white LED, 5Blue:1Red (5B:1R) LED, 5Red:1Blue (5R:1B) LED, and a control group kept in complete darkness. Following this phase, the tomatoes were transferred to simulated retail market environment conditions (24 degrees Celsius and 78% relative humidity) for a 24-day shelf display period, with data collection occurring every three days. The experimental results demonstrated that the 5B:1R LED pre-treatment was the most effective waveband for preserving the intrinsic qualities of the fruit. Compared to the control group, the 5B:1R LED successfully delayed fruit ripening and red color accumulation, showing a 19.9% decrease in the a-value and a 7.71% decrease in the L-value, while simultaneously boosting the accumulation of yellow-orange carotenoid pigments by increasing the b-value by 20.3%. Furthermore, this treatment maintained the highest physical integrity of the fruit, resulting in a 43.1% increase in flesh firmness over the control group. The 5B:1R LED also recorded the highest acidity level with an 8.7% increase over the control samples, which implies a stronger resistance against microbial and pathogenic attacks. Regarding sugar concentration, the 5R:1B LED performed best during short-term display, accelerating total soluble solids accumulation by 1.2% over the control within 12 days. However, for an extended display period of up to 18 days, the 5B:1R LED provided a more sustained increase in sugar concentrations due to its capacity to delay senescence. In conclusion, the application of a 5B:1R LED pre-treatment offers a highly effective and sustainable technique to enhance the postharvest shelf life of tomatoes, providing valuable practical benefits for producers and retailers to minimize commercial losses and boost economic growth.
- 14 May 2026
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 20 (2) , 124-131
EFFECT OF LIGHT-EMITTING DIODE WAVELENGTHS ON THE QUALITY-INDEX OF MARKET-DISPLAYED TOMATOES
This study investigated the effects of light-emitting diode (LED) wavelengths as a postharvest pre-treatment to improve the physiological quality index and delay the deterioration of market-displayed tomatoes (Solanum lycopersicum). Tomatoes are highly perishable climacteric fruits characterized by rapid developmental and ripening processes, which cause significant economic losses within the postharvest supply chain, particularly at wholesaler and retailer outlets. To address this problem, fresh tomato samples were subjected to a 5-day pre-treatment phase inside a cooling chamber at a temperature of 5 degrees Celsius and 90% relative humidity under a 16/8-hour light/dark photoperiod. The administered treatments included white LED, 5Blue:1Red (5B:1R) LED, 5Red:1Blue (5R:1B) LED, and a control group kept in complete darkness. Following this phase, the tomatoes were transferred to simulated retail market environment conditions (24 degrees Celsius and 78% relative humidity) for a 24-day shelf display period, with data collection occurring every three days. The experimental results demonstrated that the 5B:1R LED pre-treatment was the most effective waveband for preserving the intrinsic qualities of the fruit. Compared to the control group, the 5B:1R LED successfully delayed fruit ripening and red color accumulation, showing a 19.9% decrease in the a-value and a 7.71% decrease in the L-value, while simultaneously boosting the accumulation of yellow-orange carotenoid pigments by increasing the b-value by 20.3%. Furthermore, this treatment maintained the highest physical integrity of the fruit, resulting in a 43.1% increase in flesh firmness over the control group. The 5B:1R LED also recorded the highest acidity level with an 8.7% increase over the control samples, which implies a stronger resistance against microbial and pathogenic attacks. Regarding sugar concentration, the 5R:1B LED performed best during short-term display, accelerating total soluble solids accumulation by 1.2% over the control within 12 days. However, for an extended display period of up to 18 days, the 5B:1R LED provided a more sustained increase in sugar concentrations due to its capacity to delay senescence. In conclusion, the application of a 5B:1R LED pre-treatment offers a highly effective and sustainable technique to enhance the postharvest shelf life of tomatoes, providing valuable practical benefits for producers and retailers to minimize commercial losses and boost economic growth.
- Open Access
- 15 April 2026
- Published by Elsevier in SSRN Electronic Journal
Crystallisation, Polymorphism, and Carotenoid Stability of Red Palm Oil–based shortenings in Cracker Applications
Red palm oil (RPO) was investigated as a functional shortening ingredient. This study characterised shortening blends incorporating 0–35% RPO and evaluated the sensory acceptance of crackers produced from them. Chromatographic analysis confirmed the predominance of palmitic and oleic acids, with RPO inclusion significantly elevating unsaturated fatty acid content. Thermal analysis revealed similar crystallisation and melting profiles across all blends, displaying two distinct melting components. X-ray diffraction identified identical β′ and β polymorphs, while solid fat content at 30°C (18.7%–20.5%) remained within the optimal functional range. Phytonutrient levels, specifically β-carotene and lutein, increased proportionally with RPO concentration. Textural analysis indicated the control sample (4.79 N) was significantly firmer than RPO-containing blends (2.29–3.27 N). Sensory evaluation (n=50) demonstrated that crackers containing 15% RPO achieved the highest overall acceptability, performing comparably to the commercial control. These findings support the viability of RPO as a functional bakery ingredient.
- 15 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCrystallisation, Polymorphism, and Carotenoid Stability of Red Palm Oil–based shortenings in Cracker Applications
Red palm oil (RPO) was investigated as a functional shortening ingredient. This study characterised shortening blends incorporating 0–35% RPO and evaluated the sensory acceptance of crackers produced from them. Chromatographic analysis confirmed the predominance of palmitic and oleic acids, with RPO inclusion significantly elevating unsaturated fatty acid content. Thermal analysis revealed similar crystallisation and melting profiles across all blends, displaying two distinct melting components. X-ray diffraction identified identical β′ and β polymorphs, while solid fat content at 30°C (18.7%–20.5%) remained within the optimal functional range. Phytonutrient levels, specifically β-carotene and lutein, increased proportionally with RPO concentration. Textural analysis indicated the control sample (4.79 N) was significantly firmer than RPO-containing blends (2.29–3.27 N). Sensory evaluation (n=50) demonstrated that crackers containing 15% RPO achieved the highest overall acceptability, performing comparably to the commercial control. These findings support the viability of RPO as a functional bakery ingredient.
- 9 May 2025
- Published by Springer Nature in Paddy and Water Environment
- Vol. 23 (3) , 511-522
The sensitivity of rice production to transplanting date and irrigation water management in a drier climate future scenario
- 9 May 2025
- Published by Springer Nature in Paddy and Water Environment
- Vol. 23 (3) , 511-522
The sensitivity of rice production to transplanting date and irrigation water management in a drier climate future scenario
- Open Access
- 1 January 2025
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 2025 (1)
Enhancing and Modelling of Tomato Phytochemicals With LED Storage Treatment for Improved Market Shelf Life
Tomato phytochemicals are secondary metabolites that help prevent chronic diseases in humans. However, environmental and biological factors can degrade these compounds in market‐displayed conditions, making preservation crucial. This study investigates the effects of light‐emitting diodes (LEDs) of different wavelengths on tomato phytochemicals in a commercial environment. Tomatoes were pretreated for 5 days under four lighting conditions: 5 red:1 blue (5R:1B), 5 blue:1 red (5B:1R), white LEDs and darkness (control). They were then transferred to a market setting for phytochemical analysis. Results showed significant increases in ascorbic acid: 25% under 5R:1B and 11.7% under white LEDs. Total carotenoids increased by 60.3% (5R:1B), 36.8% (5B:1R) and 35.1% (white LEDs). Phenolic concentrations rose by 36.8% under white LEDs and 7.7% under 5R:1B LED, whilst flavonoid levels improved under white and 5B:1R LEDs. Quadratic regression modelling effectively captured phytochemical changes over time, proving more accurate than other regression models in predicting trends and offering superior insights for optimising LED use in postharvest handling. These findings highlight the potential of LED treatments to preserve phytochemical quality, enhance consumer health and optimise market strategies for increased profitability.
- 1 January 2025
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 2025 (1)
Open AccessEnhancing and Modelling of Tomato Phytochemicals With LED Storage Treatment for Improved Market Shelf Life
Tomato phytochemicals are secondary metabolites that help prevent chronic diseases in humans. However, environmental and biological factors can degrade these compounds in market‐displayed conditions, making preservation crucial. This study investigates the effects of light‐emitting diodes (LEDs) of different wavelengths on tomato phytochemicals in a commercial environment. Tomatoes were pretreated for 5 days under four lighting conditions: 5 red:1 blue (5R:1B), 5 blue:1 red (5B:1R), white LEDs and darkness (control). They were then transferred to a market setting for phytochemical analysis. Results showed significant increases in ascorbic acid: 25% under 5R:1B and 11.7% under white LEDs. Total carotenoids increased by 60.3% (5R:1B), 36.8% (5B:1R) and 35.1% (white LEDs). Phenolic concentrations rose by 36.8% under white LEDs and 7.7% under 5R:1B LED, whilst flavonoid levels improved under white and 5B:1R LEDs. Quadratic regression modelling effectively captured phytochemical changes over time, proving more accurate than other regression models in predicting trends and offering superior insights for optimising LED use in postharvest handling. These findings highlight the potential of LED treatments to preserve phytochemical quality, enhance consumer health and optimise market strategies for increased profitability.
- 11 January 2023
- Published by Elsevier in Food Control
- Vol. 148
Assessment of residual styrene monomer migration into yoghurt packed in High Impact Polystyrene pots using a modelling approach
- 11 January 2023
- Published by Elsevier in Food Control
- Vol. 148
Assessment of residual styrene monomer migration into yoghurt packed in High Impact Polystyrene pots using a modelling approach
- 26 September 2022
- Published by Elsevier in Environmental Pollution
- Vol. 315, 120282
Exploring use of a commercial passive sampler in a closed static chamber to measure ammonia volatilization
- 26 September 2022
- Published by Elsevier in Environmental Pollution
- Vol. 315, 120282
Exploring use of a commercial passive sampler in a closed static chamber to measure ammonia volatilization
- Open Access
- 19 August 2021
- Published by Basrah Journal of Agricultural Sciences, College of Agriculture, University of Basrah in Basrah Journal of Agricultural Sciences
- Vol. 34, 11-20
Feasibility Study of 3D Printed Materials for an Ammonia Emission Passive Sampler
Ammonia (NH3) emission accounts for a loss of 10 to 60% of the total nitrogen input in rice fields. NH3 in the air reacts with sulphuric acid, nitric acid and hydrochloric acid to form ammonium salt, which increases the concentration of PM2.5 particles in the atmosphere. These fine particles can cause respiratory problems. A reliable NH3 sampler is important in order to quantify the NH3 emission. The objective of this study is to evaluate the suitability of three 3D printed materials, namely acrylonitrile-butadiene-styrene (ABS), polylactic acid (PLA) and polypropylene (PP) compared to stainless steel and glass, as the interior material of an NH3 passive sampler for use with the chemical-trap approach; Stainless steel and glass are typically used for construction of the NH3 passive sampler. The sample plates were coated with acetone with 3% oxalic acid and tested in closed static chambers with three different NH3 sources. ABS, PP and PLA tolerated the acetone solution with PP being the least reactive. However, PP heavily warped during 3D-printing resulting in a deformed shape. Performance of coated ABS plates in trapping NH3 is similar to stainless steel and glass plates.
- 19 August 2021
- Published by Basrah Journal of Agricultural Sciences, College of Agriculture, University of Basrah in Basrah Journal of Agricultural Sciences
- Vol. 34, 11-20
Open AccessFeasibility Study of 3D Printed Materials for an Ammonia Emission Passive Sampler
Ammonia (NH3) emission accounts for a loss of 10 to 60% of the total nitrogen input in rice fields. NH3 in the air reacts with sulphuric acid, nitric acid and hydrochloric acid to form ammonium salt, which increases the concentration of PM2.5 particles in the atmosphere. These fine particles can cause respiratory problems. A reliable NH3 sampler is important in order to quantify the NH3 emission. The objective of this study is to evaluate the suitability of three 3D printed materials, namely acrylonitrile-butadiene-styrene (ABS), polylactic acid (PLA) and polypropylene (PP) compared to stainless steel and glass, as the interior material of an NH3 passive sampler for use with the chemical-trap approach; Stainless steel and glass are typically used for construction of the NH3 passive sampler. The sample plates were coated with acetone with 3% oxalic acid and tested in closed static chambers with three different NH3 sources. ABS, PP and PLA tolerated the acetone solution with PP being the least reactive. However, PP heavily warped during 3D-printing resulting in a deformed shape. Performance of coated ABS plates in trapping NH3 is similar to stainless steel and glass plates.
- Open Access
UAV- and Random-Forest-AdaBoost (RFA)-Based Estimation of Rice Plant Traits
Rapid, accurate and inexpensive methods are required to analyze plant traits throughout all crop growth stages for plant phenotyping. Few studies have comprehensively evaluated plant traits from multispectral cameras onboard UAV platforms. Additionally, machine learning algorithms tend to over- or underfit data and limited attention has been paid to optimizing their performance through an ensemble learning approach. This study aims to (1) comprehensively evaluate twelve rice plant traits estimated from aerial unmanned vehicle (UAV)-based multispectral images and (2) introduce Random Forest AdaBoost (RFA) algorithms as an optimization approach for estimating plant traits. The approach was tested based on a farmer’s field in Terengganu, Malaysia, for the off-season from February to June 2018, involving five rice cultivars and three nitrogen (N) rates. Four bands, thirteen indices and Random Forest-AdaBoost (RFA) regression models were evaluated against the twelve plant traits according to the growth stages. Among the plant traits, plant height, green leaf and storage organ biomass, and foliar nitrogen (N) content were estimated well, with a coefficient of determination (R2) above 0.80. In comparing the bands and indices, red, Normalized Difference Vegetation Index (NDVI), Ratio Vegetation Index (RVI), Red-Edge Wide Dynamic Range Vegetation Index (REWDRVI) and Red-Edge Soil Adjusted Vegetation Index (RESAVI) were remarkable in estimating all plant traits at tillering, booting and milking stages with R2 values ranging from 0.80–0.99 and root mean square error (RMSE) values ranging from 0.04–0.22. Milking was found to be the best growth stage to conduct estimations of plant traits. In summary, our findings demonstrate that an ensemble learning approach can improve the accuracy as well as reduce under/overfitting in plant phenotyping algorithms.
Open AccessUAV- and Random-Forest-AdaBoost (RFA)-Based Estimation of Rice Plant Traits
Rapid, accurate and inexpensive methods are required to analyze plant traits throughout all crop growth stages for plant phenotyping. Few studies have comprehensively evaluated plant traits from multispectral cameras onboard UAV platforms. Additionally, machine learning algorithms tend to over- or underfit data and limited attention has been paid to optimizing their performance through an ensemble learning approach. This study aims to (1) comprehensively evaluate twelve rice plant traits estimated from aerial unmanned vehicle (UAV)-based multispectral images and (2) introduce Random Forest AdaBoost (RFA) algorithms as an optimization approach for estimating plant traits. The approach was tested based on a farmer’s field in Terengganu, Malaysia, for the off-season from February to June 2018, involving five rice cultivars and three nitrogen (N) rates. Four bands, thirteen indices and Random Forest-AdaBoost (RFA) regression models were evaluated against the twelve plant traits according to the growth stages. Among the plant traits, plant height, green leaf and storage organ biomass, and foliar nitrogen (N) content were estimated well, with a coefficient of determination (R2) above 0.80. In comparing the bands and indices, red, Normalized Difference Vegetation Index (NDVI), Ratio Vegetation Index (RVI), Red-Edge Wide Dynamic Range Vegetation Index (REWDRVI) and Red-Edge Soil Adjusted Vegetation Index (RESAVI) were remarkable in estimating all plant traits at tillering, booting and milking stages with R2 values ranging from 0.80–0.99 and root mean square error (RMSE) values ranging from 0.04–0.22. Milking was found to be the best growth stage to conduct estimations of plant traits. In summary, our findings demonstrate that an ensemble learning approach can improve the accuracy as well as reduce under/overfitting in plant phenotyping algorithms.