Francesca Mancini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Francesca Mancini has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
Gian Gabriele Ori
8 shared publicationsPascal Allemand
6 shared publications- Francesco Salese
International Research School of Planetary Sciences Università d'Annunzio Pescara Italy
5 shared publications - Monica Pondrelli
Dipartimento di Ingegneria e Geologia, Università degli Studi “G. d’Annunzio” Chieti–Pescara, Pescara, Italy
5 shared publications - Adriano Tullo
INAF-Astronomical Observatory of Padova, Padua, Italy
3 shared publications - Barbara Cavalazzi
Department of Biological, Geological and Environmental Sciences University of Bologna Bologna Italy
3 shared publications
Latest Publications
- Open Access
- 2 July 2026
- Published by Copernicus GmbH
Flat-Topped Mountains in Arabia Terra, Mars: Morphometric Characterization and Genetic Implications
Arabia Terra is one of the oldest and most geologically complex regions of Mars, forming a broad transition zone between the ancient southern highlands and the northern lowland plains. The region hosts widespread layered deposits, erosional remnants, intracrater mounds, fretted valleys, isolated mesas and possible volcanic or volcaniclastic units [1]. Layered deposits have been interpreted as the result of sedimentary accumulation, airfall deposition, groundwater-related processes, erosion and possible volcanic activity [2–5] and are regarded as remnants of a formerly more extensive sedimentary cover locally associated with sulfate-bearing and Meridiani-type materials [6–9].Within this context, Flat-Topped Mountains (FTMs) represent a distinctive but poorly characterized class of positive-relief landforms in Arabia Terra. They are defined here as isolated or semi-isolated reliefs with broad, sub-planar summit surfaces, well-defined basal margins and variably degraded flanks. The term FTM is used as a descriptive geomorphic category, deliberately neutral with respect to origin, to assess their possible affinities with erosional mesas, layered mounds, exhumed landforms, groundwater-related deposits and volcanic or volcaniclastic edifices.We conducted a systematic survey of FTMs using a multi-dataset approach, integrating Context Camera (CTX) mosaics from the Murray Lab [10,11], three CTX-derived digital elevation models (DEMs) generated with the Ames Stereo Pipeline (ASP) and ISIS [12,13] and Mars Orbiter Laser Altimeter (MOLA) data [14]. A total of 20 FTMs were identified and mapped. For each landform, we extracted total height (H), basal diameter (DB) and summit diameter (DS), absolute summit elevation (Z) and computed DS/DB as a first-order morphometric proxy for assessing affinities with erosional remnants or constructional edifices [15].The 13 mapped FTMs (Fig. 1) exhibit H values ranging from ~80 to ~309 m, DB from ~0.49 to ~2.66 km and Ds from ~0.23 to ~1.42 km. DS/DB ratios range from ~0.43 to ~0.78, indicating variable degrees of summit preservation and flank retreat. CTX DEMs-derived summit elevations range from approximately −1788 to −1349 m (mean ~−1619 m, standard deviation ~126 m). The broad interquartile range (~265 m) confirms that FTM summit surfaces do not define a single, regionally continuous elevation level. Summit elevations broadly follow the regional topographic gradient and several FTMs occur close to lineaments of abrupt topographic gradient change, hereafter referred to as slope breaks (SBs). The partial correspondence between FTM summit elevations and SBs may indicate local control by pre-existing topography, differential erosion or stratigraphic discontinuities.Three non-mutually exclusive formation scenarios are considered. First, FTMs may represent erosional remnants of formerly more extensive sedimentary or volcaniclastic sequences, shaped by differential erosion and possibly capped by more resistant material; although internal layering is not directly resolved at CTX resolution in the present dataset, this scenario is consistent with the regional stratigraphy of Arabia Terra [2,5,7–9,16,17]. Second, some FTMs may record groundwater-related deposition, fluid expulsion or consolidation processes later exposed by erosion, in agreement with models of prolonged hydrogeological activity in the region [6,9,18]. Third, a volcanic or volcaniclastic origin cannot be excluded, given the proposed ancient volcanic province of Arabia Terra [4]; more speculatively, some morphologies could be compared with tuya-like edifices formed by lava–ice interaction [15,19–21,22]. The absence of diagnostic volcanic textures in the present dataset, however, suggests that this interpretation should remain a working hypothesis. Separately, the broad range of summit elevations argues against truncation at a single regional water level, as would be expected for a simple wave-planation origin.The TIN interpolation of CTX DEM-derived summit elevations provides an exploratory view of the spatial distribution of FTM summit heights. The resulting pattern suggests that summit elevations are not randomly distributed, but may define distinct altimetric domains or a broad regional trend, with summit levels broadly grouped around −1780/−1750 m, −1650/−1600 m and locally up to −1350 m. If confirmed, this arrangement could record distinct paleolake or paleoshoreline levels, an interpretation consistent with paleohydrological models for Arabia Terra [6,9] and not necessarily excluded by the association with SBs.This preliminary morphometric and topographic census provides a first quantitative description of FTMs in Arabia Terra and highlights their potential value as geomorphic markers of depositional, erosional, hydrological and possibly volcanic processes. FTMs likely do not represent a single genetic class, but a morphologically coherent population shaped by different combinations of deposition, induration, erosion and exhumation. Future work will integrate crater-retention ages, stratigraphic analysis and high-resolution image interpretation to discriminate between formation scenarios and assess their implications for the geological evolution of Arabia Terra during the Noachian–Hesperian transition.References[1] Tanaka, K.L., et al. (2014). USGS SIM 3292. [2] Fassett, C.I. and Head, J.W. (2007). JGR: Planets, 112, E08002. [3] Fergason, R.L. and Christensen, P.R. (2008). JGR: Planets, 113, E12001. [4] Michalski, J.R. and Bleacher, J.E. (2013). Nature, 502, 47–52. [5] Pondrelli, M., et al. (2015). GSA Bulletin, 127, 1064–1089. [6] Andrews-Hanna, J.C., et al. (2010). JGR: Planets, 115, E06002. [7] Zabrusky, K., et al. (2012). Icarus, 220, 311–330. [8] Annex, A.M. and Lewis, K.W. (2020). JGR: Planets, 125, e2019JE006188. [9] Schmidt, G., et al. (2021). JGR: Planets, 126, e2021JE006974. [10]...
- 2 July 2026
- Published by Copernicus GmbH
Open AccessFlat-Topped Mountains in Arabia Terra, Mars: Morphometric Characterization and Genetic Implications
Arabia Terra is one of the oldest and most geologically complex regions of Mars, forming a broad transition zone between the ancient southern highlands and the northern lowland plains. The region hosts widespread layered deposits, erosional remnants, intracrater mounds, fretted valleys, isolated mesas and possible volcanic or volcaniclastic units [1]. Layered deposits have been interpreted as the result of sedimentary accumulation, airfall deposition, groundwater-related processes, erosion and possible volcanic activity [2–5] and are regarded as remnants of a formerly more extensive sedimentary cover locally associated with sulfate-bearing and Meridiani-type materials [6–9].Within this context, Flat-Topped Mountains (FTMs) represent a distinctive but poorly characterized class of positive-relief landforms in Arabia Terra. They are defined here as isolated or semi-isolated reliefs with broad, sub-planar summit surfaces, well-defined basal margins and variably degraded flanks. The term FTM is used as a descriptive geomorphic category, deliberately neutral with respect to origin, to assess their possible affinities with erosional mesas, layered mounds, exhumed landforms, groundwater-related deposits and volcanic or volcaniclastic edifices.We conducted a systematic survey of FTMs using a multi-dataset approach, integrating Context Camera (CTX) mosaics from the Murray Lab [10,11], three CTX-derived digital elevation models (DEMs) generated with the Ames Stereo Pipeline (ASP) and ISIS [12,13] and Mars Orbiter Laser Altimeter (MOLA) data [14]. A total of 20 FTMs were identified and mapped. For each landform, we extracted total height (H), basal diameter (DB) and summit diameter (DS), absolute summit elevation (Z) and computed DS/DB as a first-order morphometric proxy for assessing affinities with erosional remnants or constructional edifices [15].The 13 mapped FTMs (Fig. 1) exhibit H values ranging from ~80 to ~309 m, DB from ~0.49 to ~2.66 km and Ds from ~0.23 to ~1.42 km. DS/DB ratios range from ~0.43 to ~0.78, indicating variable degrees of summit preservation and flank retreat. CTX DEMs-derived summit elevations range from approximately −1788 to −1349 m (mean ~−1619 m, standard deviation ~126 m). The broad interquartile range (~265 m) confirms that FTM summit surfaces do not define a single, regionally continuous elevation level. Summit elevations broadly follow the regional topographic gradient and several FTMs occur close to lineaments of abrupt topographic gradient change, hereafter referred to as slope breaks (SBs). The partial correspondence between FTM summit elevations and SBs may indicate local control by pre-existing topography, differential erosion or stratigraphic discontinuities.Three non-mutually exclusive formation scenarios are considered. First, FTMs may represent erosional remnants of formerly more extensive sedimentary or volcaniclastic sequences, shaped by differential erosion and possibly capped by more resistant material; although internal layering is not directly resolved at CTX resolution in the present dataset, this scenario is consistent with the regional stratigraphy of Arabia Terra [2,5,7–9,16,17]. Second, some FTMs may record groundwater-related deposition, fluid expulsion or consolidation processes later exposed by erosion, in agreement with models of prolonged hydrogeological activity in the region [6,9,18]. Third, a volcanic or volcaniclastic origin cannot be excluded, given the proposed ancient volcanic province of Arabia Terra [4]; more speculatively, some morphologies could be compared with tuya-like edifices formed by lava–ice interaction [15,19–21,22]. The absence of diagnostic volcanic textures in the present dataset, however, suggests that this interpretation should remain a working hypothesis. Separately, the broad range of summit elevations argues against truncation at a single regional water level, as would be expected for a simple wave-planation origin.The TIN interpolation of CTX DEM-derived summit elevations provides an exploratory view of the spatial distribution of FTM summit heights. The resulting pattern suggests that summit elevations are not randomly distributed, but may define distinct altimetric domains or a broad regional trend, with summit levels broadly grouped around −1780/−1750 m, −1650/−1600 m and locally up to −1350 m. If confirmed, this arrangement could record distinct paleolake or paleoshoreline levels, an interpretation consistent with paleohydrological models for Arabia Terra [6,9] and not necessarily excluded by the association with SBs.This preliminary morphometric and topographic census provides a first quantitative description of FTMs in Arabia Terra and highlights their potential value as geomorphic markers of depositional, erosional, hydrological and possibly volcanic processes. FTMs likely do not represent a single genetic class, but a morphologically coherent population shaped by different combinations of deposition, induration, erosion and exhumation. Future work will integrate crater-retention ages, stratigraphic analysis and high-resolution image interpretation to discriminate between formation scenarios and assess their implications for the geological evolution of Arabia Terra during the Noachian–Hesperian transition.References[1] Tanaka, K.L., et al. (2014). USGS SIM 3292. [2] Fassett, C.I. and Head, J.W. (2007). JGR: Planets, 112, E08002. [3] Fergason, R.L. and Christensen, P.R. (2008). JGR: Planets, 113, E12001. [4] Michalski, J.R. and Bleacher, J.E. (2013). Nature, 502, 47–52. [5] Pondrelli, M., et al. (2015). GSA Bulletin, 127, 1064–1089. [6] Andrews-Hanna, J.C., et al. (2010). JGR: Planets, 115, E06002. [7] Zabrusky, K., et al. (2012). Icarus, 220, 311–330. [8] Annex, A.M. and Lewis, K.W. (2020). JGR: Planets, 125, e2019JE006188. [9] Schmidt, G., et al. (2021). JGR: Planets, 126, e2021JE006974. [10]...
- Open Access
- 2 July 2026
- Published by Copernicus GmbH
Mitigating the HiRISE RED4 CCD data gap in stereo DTM production: an adaptive workflow for high-resolution Martian DTM generation
IntroductionHigh-resolution Digital Terrain Models (DTMs) derived from HiRISE stereo observations are fundamental for the geomorphological analysis of the Martian surface, enabling meter-scale investigation of slopes, sedimentary bodies, aeolian landforms, impact-related features and candidate exploration terrains [1]. Open-source workflows based on ISIS and the NASA Ames Stereo Pipeline (ASP) have made HiRISE DTM generation broadly accessible to the planetary science community [2,3]. Since 2023, however, the intermittent failure of the RED4 CCD has produced a central data gap in many recent HiRISE observations. Because RED4 lies near the center of the focal plane (Figure 1), its loss disrupts CCD mosaicking, tone balancing and stereo processing more severely than edge-CCD losses, often causing standard pipelines to fail at the mosaicking or stereo-preparation stage. The HiRISE team has recently introduced a mitigation strategy [4] in which the overlapping IR10 CCD is radiometrically matched to the surrounding RED data and inserted in place of the missing RED4 as a synthetic component, named SYN4. Previous HiRISE stereo work has shown that these DTMs support ultrahigh-resolution topographic mapping and analyses of active Martian surface processes [5,6], while the September 2024 HiRISE/PDS release explicitly notes both the RED4 failure and the planned use of IR10 data to fill the gap for selected products [7]. While effective, this approach has so far been implemented within selected internal HiRISE pipelines and is not yet integrated into the openly available ASP/ISIS chain on which most external users rely.Figure 1: HiRISE focal plane detector geometry and location of the RED4 gap. Relationship between RED4, IR10 and synthetic SYN4 component.A RED4-aware ASP workflowWe present an adaptive HiRISE stereo processing workflow that integrates the SYN4/IR10 concept into a fully open-source ASP/ISIS chain. The workflow follows the standard sequence of image preparation, bundle adjustment, stereo correlation, point-cloud generation, DEM extraction and co-registration to reference topography, but introduces an automatic preprocessing step that checks the availability of RED4 for each input observation. When RED4 is missing, the workflow activates an IR10-based fallback prior to CCD mosaicking: IR10 is radiometrically matched to the adjacent RED CCDs and ingested as a SYN4 substitute, restoring the continuity of the RED mosaic before stereo reconstruction proceeds. This preserves the usability of stereo pairs that would otherwise fail at the mosaicking stage and keeps the rest of the chain unchanged, ensuring full reproducibility.Test cases and validationThe workflow was tested on two HiRISE stereo pairs acquired in 2025 in Arabia Terra: ESP_088933_2200 / ESP_089012_2200 (convergence angle 28.0°) and ESP_089500_2200 / ESP_089645_2200 (convergence angle 12.4°). The two pairs were selected to evaluate the workflow under contrasting stereo geometries, an ideal high-convergence case and a marginal low-convergence case below the nominal HiRISE threshold. Both pairs were processed through the full pipeline, producing continuous DTMs across the RED4 gap with no visible seams or correlation drop-outs along the SYN4 strips (Figure 2, left). Vertical consistency was assessed against an independent HRSC reference DTM, chosen because its different instruments, mission and processing chain provide a fully external benchmark. A topographic profile crossing the SYN4 strip shows close agreement between the HiRISE and HRSC datasets along the entire ~9 km transect, with no detectable offset or discontinuity at the SYN4 boundaries (Figure 2, right). The agreement holds for both pairs, indicating that the IR10-based reconstruction does not introduce systematic vertical artefacts within the gap region, even in the marginal convergence-angle case.Figure 2: Validation of the RED4-aware HiRISE workflow in Arabia Terra (~39.9°N, 26.5°E). Left: HiRISE DTMs generated from the two test stereo pairs (ESP_089500_2200/ESP_089645_2200 and ESP_088933_2200/ESP_089012_2200); red rectangles outline the RED4 gap, reconstructed through the IR10/SYN4 substitution. The black line indicates the NE–SW topographic transect. Right: ~9 km topographic profile across the SYN4 strip, comparing the HiRISE DTM (red) with the independent HRSC reference DTM (blue). The yellow box marks the most critical portion of the transect across the reconstructed gap; this sector is shown in detail in the upper inset, highlighting the continuity of the HiRISE topography and its agreement with the HRSC reference across the SYN4 boundaries.ConclusionBy integrating the SYN4/IR10 concept into an open-source ASP-based workflow, this work provides a practical and reproducible solution for recovering scientific value from RED4-affected HiRISE stereo observations. The independent HRSC validation confirms that the reconstructed topography is consistent with external reference data across the gap region.References: [1] McEwen, A.S., et al., 2007. Journal of Geophysical Research: Planets, 112, E05S02. doi:10.1029/2005JE002605. [2] Hepburn, A.J., Holt, T., Hubbard, B. and Ng, F., 2019. Geoscientific Instrumentation, Methods and Data Systems, 8, 293–313. doi:10.5194/gi-8-293-2019. [3] Kirk, R.L., et al., 2008. Journal of Geophysical Research: Planets, 113, E00A24. doi:10.1029/2007JE003000. [4] Beyer, R.A., Alexandrov, O. and McMichael, S., 2018. Earth and Space Science, 5, 537–548. doi:10.1029/2018EA000409. [5] Sutton, S.S., et al., 2022. Remote Sensing, 14, 2403. doi:10.3390/rs14102403. [6] Sutton, S.S., et al., 2025. 56th Lunar and Planetary Science Conference, Abstract #2463. [7] HiRISE Operations Center, 2024. PDS Release: September 2024 Images. University of Arizona HiRISE.
- 2 July 2026
- Published by Copernicus GmbH
Open AccessMitigating the HiRISE RED4 CCD data gap in stereo DTM production: an adaptive workflow for high-resolution Martian DTM generation
IntroductionHigh-resolution Digital Terrain Models (DTMs) derived from HiRISE stereo observations are fundamental for the geomorphological analysis of the Martian surface, enabling meter-scale investigation of slopes, sedimentary bodies, aeolian landforms, impact-related features and candidate exploration terrains [1]. Open-source workflows based on ISIS and the NASA Ames Stereo Pipeline (ASP) have made HiRISE DTM generation broadly accessible to the planetary science community [2,3]. Since 2023, however, the intermittent failure of the RED4 CCD has produced a central data gap in many recent HiRISE observations. Because RED4 lies near the center of the focal plane (Figure 1), its loss disrupts CCD mosaicking, tone balancing and stereo processing more severely than edge-CCD losses, often causing standard pipelines to fail at the mosaicking or stereo-preparation stage. The HiRISE team has recently introduced a mitigation strategy [4] in which the overlapping IR10 CCD is radiometrically matched to the surrounding RED data and inserted in place of the missing RED4 as a synthetic component, named SYN4. Previous HiRISE stereo work has shown that these DTMs support ultrahigh-resolution topographic mapping and analyses of active Martian surface processes [5,6], while the September 2024 HiRISE/PDS release explicitly notes both the RED4 failure and the planned use of IR10 data to fill the gap for selected products [7]. While effective, this approach has so far been implemented within selected internal HiRISE pipelines and is not yet integrated into the openly available ASP/ISIS chain on which most external users rely.Figure 1: HiRISE focal plane detector geometry and location of the RED4 gap. Relationship between RED4, IR10 and synthetic SYN4 component.A RED4-aware ASP workflowWe present an adaptive HiRISE stereo processing workflow that integrates the SYN4/IR10 concept into a fully open-source ASP/ISIS chain. The workflow follows the standard sequence of image preparation, bundle adjustment, stereo correlation, point-cloud generation, DEM extraction and co-registration to reference topography, but introduces an automatic preprocessing step that checks the availability of RED4 for each input observation. When RED4 is missing, the workflow activates an IR10-based fallback prior to CCD mosaicking: IR10 is radiometrically matched to the adjacent RED CCDs and ingested as a SYN4 substitute, restoring the continuity of the RED mosaic before stereo reconstruction proceeds. This preserves the usability of stereo pairs that would otherwise fail at the mosaicking stage and keeps the rest of the chain unchanged, ensuring full reproducibility.Test cases and validationThe workflow was tested on two HiRISE stereo pairs acquired in 2025 in Arabia Terra: ESP_088933_2200 / ESP_089012_2200 (convergence angle 28.0°) and ESP_089500_2200 / ESP_089645_2200 (convergence angle 12.4°). The two pairs were selected to evaluate the workflow under contrasting stereo geometries, an ideal high-convergence case and a marginal low-convergence case below the nominal HiRISE threshold. Both pairs were processed through the full pipeline, producing continuous DTMs across the RED4 gap with no visible seams or correlation drop-outs along the SYN4 strips (Figure 2, left). Vertical consistency was assessed against an independent HRSC reference DTM, chosen because its different instruments, mission and processing chain provide a fully external benchmark. A topographic profile crossing the SYN4 strip shows close agreement between the HiRISE and HRSC datasets along the entire ~9 km transect, with no detectable offset or discontinuity at the SYN4 boundaries (Figure 2, right). The agreement holds for both pairs, indicating that the IR10-based reconstruction does not introduce systematic vertical artefacts within the gap region, even in the marginal convergence-angle case.Figure 2: Validation of the RED4-aware HiRISE workflow in Arabia Terra (~39.9°N, 26.5°E). Left: HiRISE DTMs generated from the two test stereo pairs (ESP_089500_2200/ESP_089645_2200 and ESP_088933_2200/ESP_089012_2200); red rectangles outline the RED4 gap, reconstructed through the IR10/SYN4 substitution. The black line indicates the NE–SW topographic transect. Right: ~9 km topographic profile across the SYN4 strip, comparing the HiRISE DTM (red) with the independent HRSC reference DTM (blue). The yellow box marks the most critical portion of the transect across the reconstructed gap; this sector is shown in detail in the upper inset, highlighting the continuity of the HiRISE topography and its agreement with the HRSC reference across the SYN4 boundaries.ConclusionBy integrating the SYN4/IR10 concept into an open-source ASP-based workflow, this work provides a practical and reproducible solution for recovering scientific value from RED4-affected HiRISE stereo observations. The independent HRSC validation confirms that the reconstructed topography is consistent with external reference data across the gap region.References: [1] McEwen, A.S., et al., 2007. Journal of Geophysical Research: Planets, 112, E05S02. doi:10.1029/2005JE002605. [2] Hepburn, A.J., Holt, T., Hubbard, B. and Ng, F., 2019. Geoscientific Instrumentation, Methods and Data Systems, 8, 293–313. doi:10.5194/gi-8-293-2019. [3] Kirk, R.L., et al., 2008. Journal of Geophysical Research: Planets, 113, E00A24. doi:10.1029/2007JE003000. [4] Beyer, R.A., Alexandrov, O. and McMichael, S., 2018. Earth and Space Science, 5, 537–548. doi:10.1029/2018EA000409. [5] Sutton, S.S., et al., 2022. Remote Sensing, 14, 2403. doi:10.3390/rs14102403. [6] Sutton, S.S., et al., 2025. 56th Lunar and Planetary Science Conference, Abstract #2463. [7] HiRISE Operations Center, 2024. PDS Release: September 2024 Images. University of Arizona HiRISE.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Education as a transfer mechanism: translating planetary remote sensing methodologies into operational Earth Observation for Earth-system applications
Earth is the best-constrained planetary body, yet many Earth-system challenges still require remote-sensing workflows that remain robust under incomplete ground truth, multi-sensor heterogeneity, and complex observation geometries. Planetary science has long operated under these constraints, developing interpretation strategies and processing practices that are increasingly relevant for Earth Observation (EO) applications in hazard monitoring, environmental change, and geological process understanding. In line with the PS1.3 scope of transferring planetary-science methodologies to advance Earth-system knowledge, we present an education-driven framework designed to operationalise this methodological transfer at MSc level.We describe the structure and rationale of a new Earth Observation curriculum embedded within an MSc in Planetary Sciences, conceived as an “educational pipeline” that trains students to move from sensor-aware analysis to geology-driven interpretation and application-ready products. The curriculum integrates core modules on Earth Observation analysis, satellite multi/hyperspectral data analysis, and geospatial technologies, followed by geology-centred Earth-system applications (e.g., sedimentary environments, marine geology, global changes) and applied EO modules targeting volcanic monitoring and tectonic deformation. A distinctive component is digital field mapping with emerging technologies, designed to explicitly link remote-sensing products to validation strategies and field-based geological reasoning. The training pathway is reinforced through institutional collaboration with national agencies and research bodies, enabling exposure to operational practices and real-world constraints.We argue that the key innovation lies in implementing a reproducible planetary-to-Earth methodological transfer framework based on: (i) observation-geometry and uncertainty-aware processing, (ii) scalable multi-sensor analytics, (iii) process-based geological interpretation, and (iv) field-connected validation and mapping. By framing education as a mechanism for transferring robust planetary methodologies into EO practice, this approach contributes to bridging planetary and Earth-system sciences while producing graduates capable of translating EO data into reliable, decision-relevant geoscience knowledge.Keywords: comparative planetology; Earth Observation; remote sensing; hyperspectral; GIS/geoprocessing; hazards; digital field mapping.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessEducation as a transfer mechanism: translating planetary remote sensing methodologies into operational Earth Observation for Earth-system applications
Earth is the best-constrained planetary body, yet many Earth-system challenges still require remote-sensing workflows that remain robust under incomplete ground truth, multi-sensor heterogeneity, and complex observation geometries. Planetary science has long operated under these constraints, developing interpretation strategies and processing practices that are increasingly relevant for Earth Observation (EO) applications in hazard monitoring, environmental change, and geological process understanding. In line with the PS1.3 scope of transferring planetary-science methodologies to advance Earth-system knowledge, we present an education-driven framework designed to operationalise this methodological transfer at MSc level.We describe the structure and rationale of a new Earth Observation curriculum embedded within an MSc in Planetary Sciences, conceived as an “educational pipeline” that trains students to move from sensor-aware analysis to geology-driven interpretation and application-ready products. The curriculum integrates core modules on Earth Observation analysis, satellite multi/hyperspectral data analysis, and geospatial technologies, followed by geology-centred Earth-system applications (e.g., sedimentary environments, marine geology, global changes) and applied EO modules targeting volcanic monitoring and tectonic deformation. A distinctive component is digital field mapping with emerging technologies, designed to explicitly link remote-sensing products to validation strategies and field-based geological reasoning. The training pathway is reinforced through institutional collaboration with national agencies and research bodies, enabling exposure to operational practices and real-world constraints.We argue that the key innovation lies in implementing a reproducible planetary-to-Earth methodological transfer framework based on: (i) observation-geometry and uncertainty-aware processing, (ii) scalable multi-sensor analytics, (iii) process-based geological interpretation, and (iv) field-connected validation and mapping. By framing education as a mechanism for transferring robust planetary methodologies into EO practice, this approach contributes to bridging planetary and Earth-system sciences while producing graduates capable of translating EO data into reliable, decision-relevant geoscience knowledge.Keywords: comparative planetology; Earth Observation; remote sensing; hyperspectral; GIS/geoprocessing; hazards; digital field mapping.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Mineralogical Diversity and Crustal Composition of Selected Lunar Regions Based on M³ Hyperspectral Analysis: Implications for ISRU and Future Exploration
Characterizing lunar surface mineralogy is essential for understanding crustal evolution, magma ocean differentiation, impact excavation processes, and identifying In-Situ Resource Utilization (ISRU) targets for future exploration. This study determines the mineralogical composition and crustal stratigraphy across four geologically distinct lunar terrains using Moon Mineralogy Mapper (M³) hyperspectral data: the Aristarchus plateau (volcanically complex), Dionysius crater (a pristine impact structure), the Malapert region (ancient highlands of the South Pole), and Leibnitz R (primordial anorthositic crust).Level-2 M³ hyperspectral cubes (430-3000 nm, 140 m/pixel) [1] were processed through systematic workflows: destriping, photometric normalization, Minimum Noise Fraction (MNF) transform, Pixel Purity Index (PPI) endmember extraction, continuum removal, and Spectral Angle Mapper (SAM) classification. Spectral signatures were validated against RELAB laboratory spectra resampled to M³ resolution. Key mineral phases identified include anorthite, low-calcium pyroxene (LCP), high-calcium pyroxene (HCP), olivine, spinel-bearing assemblages, and ilmenite.Aristarchus exhibits the highest mineralogical diversity [2], with anorthositic highland material, HCP- and LCP-bearing mafic units, and localized olivine signatures. Anorthosite absorption features (1.25 µm band depth) dominate the crater floor, pyroxene signatures characterize the ejecta blanket, and olivine (1 µm band depth) appears along crater rims. This heterogeneity reflects volcanic emplacement and deep impact excavation, offering diverse oxygen-rich and iron-bearing ISRU targets.Dionysius (Mare Tranquillitatis) reveals systematic radial mineralogical zonation from HCP-dominated rim materials to LCP-enriched central exposures, indicating excavation through compositionally stratified crust. This vertical gradient constrains upper crustal HCP overlying lower crustal LCP layers [3,4], consistent with magma ocean crystallization models. Olivine and ilmenite detections suggest penetration to mafic lithologies, constraining crust-mantle differentiation.Malapert (South Pole) is predominantly anorthositic, with isolated spinel-bearing outcrops (5% band depth at 2 µm) associated with uplifted crustal blocks. These exposures constrain deep crustal composition and early magma ocean differentiation. The area's abundant anorthosite and its location near permanently shadowed regions make it a key site for oxygen extraction and the establishment of polar exploration facilities.Leibnitz R (far side) displays spectrally pure anorthositic composition, representing primordial crust formed during lunar magma ocean plagioclase flotation. Its compositional homogeneity provides a reference for early lunar differentiation and high-purity feedstock for ISRU oxygen production.This study integrates hyperspectral mineralogy with surface morphology to constrain crustal architecture and geological evolution across diverse lunar environments. The methodology establishes a replicable framework for hyperspectral analysis applicable to future mission planning, linking fundamental crustal processes to ISRU resource assessment and advancing sustainable lunar exploration strategies.References: [1] Green et al. (2011) JGR: Planets, 10.1029/2011JE003797; [2] Chevrel et al. (2009) Icarus, 10.1016/j.icarus.2008.08.005; [3] Moriarty & Pieters (2018) JGR, 10.1002/2017JE005364; [4] Wieczorek et al. (2013) Science, 10.1126/science.1231530Acknowledgement: EU HORIZON-MSCA-2023-SE-01, Grant 101183089
- 13 March 2026
- Published by Copernicus GmbH
Open AccessMineralogical Diversity and Crustal Composition of Selected Lunar Regions Based on M³ Hyperspectral Analysis: Implications for ISRU and Future Exploration
Characterizing lunar surface mineralogy is essential for understanding crustal evolution, magma ocean differentiation, impact excavation processes, and identifying In-Situ Resource Utilization (ISRU) targets for future exploration. This study determines the mineralogical composition and crustal stratigraphy across four geologically distinct lunar terrains using Moon Mineralogy Mapper (M³) hyperspectral data: the Aristarchus plateau (volcanically complex), Dionysius crater (a pristine impact structure), the Malapert region (ancient highlands of the South Pole), and Leibnitz R (primordial anorthositic crust).Level-2 M³ hyperspectral cubes (430-3000 nm, 140 m/pixel) [1] were processed through systematic workflows: destriping, photometric normalization, Minimum Noise Fraction (MNF) transform, Pixel Purity Index (PPI) endmember extraction, continuum removal, and Spectral Angle Mapper (SAM) classification. Spectral signatures were validated against RELAB laboratory spectra resampled to M³ resolution. Key mineral phases identified include anorthite, low-calcium pyroxene (LCP), high-calcium pyroxene (HCP), olivine, spinel-bearing assemblages, and ilmenite.Aristarchus exhibits the highest mineralogical diversity [2], with anorthositic highland material, HCP- and LCP-bearing mafic units, and localized olivine signatures. Anorthosite absorption features (1.25 µm band depth) dominate the crater floor, pyroxene signatures characterize the ejecta blanket, and olivine (1 µm band depth) appears along crater rims. This heterogeneity reflects volcanic emplacement and deep impact excavation, offering diverse oxygen-rich and iron-bearing ISRU targets.Dionysius (Mare Tranquillitatis) reveals systematic radial mineralogical zonation from HCP-dominated rim materials to LCP-enriched central exposures, indicating excavation through compositionally stratified crust. This vertical gradient constrains upper crustal HCP overlying lower crustal LCP layers [3,4], consistent with magma ocean crystallization models. Olivine and ilmenite detections suggest penetration to mafic lithologies, constraining crust-mantle differentiation.Malapert (South Pole) is predominantly anorthositic, with isolated spinel-bearing outcrops (5% band depth at 2 µm) associated with uplifted crustal blocks. These exposures constrain deep crustal composition and early magma ocean differentiation. The area's abundant anorthosite and its location near permanently shadowed regions make it a key site for oxygen extraction and the establishment of polar exploration facilities.Leibnitz R (far side) displays spectrally pure anorthositic composition, representing primordial crust formed during lunar magma ocean plagioclase flotation. Its compositional homogeneity provides a reference for early lunar differentiation and high-purity feedstock for ISRU oxygen production.This study integrates hyperspectral mineralogy with surface morphology to constrain crustal architecture and geological evolution across diverse lunar environments. The methodology establishes a replicable framework for hyperspectral analysis applicable to future mission planning, linking fundamental crustal processes to ISRU resource assessment and advancing sustainable lunar exploration strategies.References: [1] Green et al. (2011) JGR: Planets, 10.1029/2011JE003797; [2] Chevrel et al. (2009) Icarus, 10.1016/j.icarus.2008.08.005; [3] Moriarty & Pieters (2018) JGR, 10.1002/2017JE005364; [4] Wieczorek et al. (2013) Science, 10.1126/science.1231530Acknowledgement: EU HORIZON-MSCA-2023-SE-01, Grant 101183089
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
Water in the Ahnet Basin (Algeria): Traces of the Wet Past of the Sahara Desert as an Analog for the Hesperian-Amazonian Transition in Arabia Terra (Mars)
Introduction During the whole Holocene, the Sahara Desert underwent a series of cyclic climatic fluctuations resulting in alternating arid and humid phases. Current arid conditions began ~6,000 BP. Prior to that, from ~14,500 to ~6,000 BP, widespread and abundant rainfall characterized the so-called ‘Green Sahara’, the last African Humid Period (AHP) when the Sahara was vegetated. [1, 2]. Evidence of the extensive pluvial activity that characterized the AHP can be documented even in areas close to presently hyperarid zones such as the Tanezrouft. The Ahnet Basin, situated at the northeastern margin of the Tanezrouft, is indeed characterized by a wide range of morphologies and deposits that testimony the wet past of the basin. Our work focused on establishing the relationship between the paleohydrography of the basin, still visible, and its Quaternary deposits to infer, through mapping and stratigraphicrelationships: A better understanding of how the wet to arid climatic transition influenced the deposits and their distribution inside the basin; The possibilities to use the Ahnet Basin as a terrestrial analog for the evaporitic, alluvial, and eolian deposits directly related to the wet-to-arid transition on Mars at the end of the Hesperian. Geological and Geographical Setting The Ahnet Basin (~65,000 km²) lies in the Algerian Sahara, ~1,200 km south of Algiers, [3, 4] and is one of the ‘Peri-Hoggar Basins’ that formed during the Pan-African Orogeny (600–500 Ma). The metamorphic basement of Precambrian age is unconformably covered by Paleozoic successions of siliciclastic sediments up to 7 km in thickness. They consist of NNW-dipping sandstones and shales with few Devonian and Carboniferous limestone intercalations. The origin of the deposits is predominantly marine with continental fluviatile facies gradually transitioning to shallow marine and then to offshore moving from South to North [5, 6, 7]. The Mesozoic sedimentary record, due to a strong Triassic erosional phase, is completely absent from the basin. Finally, the Quaternary deposits, which we intend to analyze, appear to reflect a range of different genetic agents. Data and Methods The study was performed inside a GIS environment and, focusing onfour areas originally selected to be part of a sampling campaign. We produced four hybrid geomorphological maps, one for each area, making use of true color Sentinel-2A images as basemap (resolution: 10 m/px) and the Copernicus 30 m DEM for topographic and morphological characterization. The hydrography was digitalized both manually and automatically using GRASS GIS. Stratigraphic relationships were studied using Google Earth imagery and GIS 3D models. Results Mapping at 1:10,000 scale identified ~10 litho-morphological units across all study areas (see Fig. 1 for example). Tectonic structures were also mapped in this phase, while a more detailed characterization of the geomorphological elements will be presented in a future publication. This process revealed the extensive presence inside the basin of alluvial deposits directly linked to a dense and well-developed valley network. Despite the limitations set by our DSM in the analysis of such a pervasive hydrography, we managed to automatically extract channels up to the 11th Strahler order. These data, however, clash with the present-time climate whose numerical parameters were collected from three weather stations located all across the basin. Precipitation is
- 9 July 2025
- Published by Copernicus GmbH
Open AccessWater in the Ahnet Basin (Algeria): Traces of the Wet Past of the Sahara Desert as an Analog for the Hesperian-Amazonian Transition in Arabia Terra (Mars)
Introduction During the whole Holocene, the Sahara Desert underwent a series of cyclic climatic fluctuations resulting in alternating arid and humid phases. Current arid conditions began ~6,000 BP. Prior to that, from ~14,500 to ~6,000 BP, widespread and abundant rainfall characterized the so-called ‘Green Sahara’, the last African Humid Period (AHP) when the Sahara was vegetated. [1, 2]. Evidence of the extensive pluvial activity that characterized the AHP can be documented even in areas close to presently hyperarid zones such as the Tanezrouft. The Ahnet Basin, situated at the northeastern margin of the Tanezrouft, is indeed characterized by a wide range of morphologies and deposits that testimony the wet past of the basin. Our work focused on establishing the relationship between the paleohydrography of the basin, still visible, and its Quaternary deposits to infer, through mapping and stratigraphicrelationships: A better understanding of how the wet to arid climatic transition influenced the deposits and their distribution inside the basin; The possibilities to use the Ahnet Basin as a terrestrial analog for the evaporitic, alluvial, and eolian deposits directly related to the wet-to-arid transition on Mars at the end of the Hesperian. Geological and Geographical Setting The Ahnet Basin (~65,000 km²) lies in the Algerian Sahara, ~1,200 km south of Algiers, [3, 4] and is one of the ‘Peri-Hoggar Basins’ that formed during the Pan-African Orogeny (600–500 Ma). The metamorphic basement of Precambrian age is unconformably covered by Paleozoic successions of siliciclastic sediments up to 7 km in thickness. They consist of NNW-dipping sandstones and shales with few Devonian and Carboniferous limestone intercalations. The origin of the deposits is predominantly marine with continental fluviatile facies gradually transitioning to shallow marine and then to offshore moving from South to North [5, 6, 7]. The Mesozoic sedimentary record, due to a strong Triassic erosional phase, is completely absent from the basin. Finally, the Quaternary deposits, which we intend to analyze, appear to reflect a range of different genetic agents. Data and Methods The study was performed inside a GIS environment and, focusing onfour areas originally selected to be part of a sampling campaign. We produced four hybrid geomorphological maps, one for each area, making use of true color Sentinel-2A images as basemap (resolution: 10 m/px) and the Copernicus 30 m DEM for topographic and morphological characterization. The hydrography was digitalized both manually and automatically using GRASS GIS. Stratigraphic relationships were studied using Google Earth imagery and GIS 3D models. Results Mapping at 1:10,000 scale identified ~10 litho-morphological units across all study areas (see Fig. 1 for example). Tectonic structures were also mapped in this phase, while a more detailed characterization of the geomorphological elements will be presented in a future publication. This process revealed the extensive presence inside the basin of alluvial deposits directly linked to a dense and well-developed valley network. Despite the limitations set by our DSM in the analysis of such a pervasive hydrography, we managed to automatically extract channels up to the 11th Strahler order. These data, however, clash with the present-time climate whose numerical parameters were collected from three weather stations located all across the basin. Precipitation is
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
Hyperspectral Mineral Mapping for Sustainable Lunar Exploration: Targeting ISRU Resources in Key Lunar Regions
Introduction and ObjectivesFor ISRU and sustainable lunar habitats, characterizing the mineralogical heterogeneity of candidate landing sites is critical for identifying regions of high resource potential. This study investigates four geologically diverse lunar regions—Aristarchus, Malapert, Mare Tranquillitatis, and Leibnitz Crater—using data from the Moon Mineralogy Mapper (M³) onboard Chandrayaan-1. The objective is to map mineralogical compositions relevant to resource extraction, supporting future lunar exploration strategies.Site Selection CriteriaThe four regions were selected based on their geological diversity and potential ISRU value. Key mineralogical targets include ilmenite (for oxygen production), anorthosite and plagioclase (for construction materials), and regions enriched in FeO, TiO₂, or Helium-3. Polar regions like Malapert may contain water ice in shadowed areas and offer thermal stability.Site accessibility and terrain complexity were also considered. Although precise landing constraints are mission-specific and still under active assessment, general factors such as surface roughness and illumination conditions can influence the operational feasibility of exploration. The near side supports direct Earth communication, while far side sites like Leibnitz offer long-term strategic value.Availability of high-quality M³ imagery was also essential for ensuring robust mineralogical mapping.M3 Instrument OverviewMoon Mineralogy Mapper (M³) is a high-resolution imaging spectrometer that measured reflectance in the 430-3000 nm range with 10 nm spectral resolution on 85 adjacent bands. Here, calibrated Level 2 products (NASA PDS) have been used that have gone through radiometric, photometric, and thermal corrections (Martinot et al., 2018; Mustard et al., 2011; Staid et al., 2011). Most M³ scenes were captured in global mode, with ~140 m/pixel resolution, adequate for regional-scale mineralogical analysis.Data Preprocessing and SubsettingTo ensure optimal signal quality, two destriping procedures were used: a standard destriping routine and the THOR method to remove striping vertically. Spectral and spatial subsetting was then performed to remove noise bands, black edge effects, and non-relevant pixels. Preprocessing was critical in polar regions like Malapert, where signal degradation dominates. Final datasets typically retained 83 of the initial 85 spectral bands.Hyperspectral Analysis WorkflowThe analysis process used the Spectral Hourglass methodology to derive endmembers and mineral abundance map.Dimensionality Reduction: Minimum Noise Fraction (MNF) transformation was used to reduce data dimensionality without loss of variance. Most scenes had >90% of spectral variance in the first 3–6 MNF components. Endmember Extraction: Pixel Purity Index (PPI) found spectrally pure pixels spectrally, then plotted in the N-Dimensional Visualizer. PPI iterations and thresholds were tuned for each image (~10,000 iterations, threshold ~2.5) to identify stable endmember candidates. Spectral Classification: Linear Spectral Unmixing (LSU) and Spectral Angle Mapper (SAM) were applied. LSU provides sub-pixel abundance maps, and SAM offers angular similarity-based classification, illumination-variation resistance—critical for lunar landscapes. Spectral Library Comparison: Spectra were compared with laboratory reflectance standards of the RELAB database (NASA PDS, 2020) between 540–2990 nm. Target minerals: plagioclase, Ca-pyroxenes, ilmenite, and spinel Mineral Identification CriteriaDiagnostic absorption features were identified by depth, asymmetry, and center wavelength. Continuum subtraction was used to detect key features, especially in space-weathered materials. After Suarez-Valencia et al. (2024), rigorous model selection was employed to minimize false positives.Pyroxenes show characteristic absorptions at 1000 and 2000 nm. Olivine exhibited a broad, asymmetric feature at 1000 nm. Spinel displays a prominent ~2000 nm band. Anorthosite and plagioclase exhibited low absorption near 1250 nm with high total reflectance. Troilite was characterized by flat, low-reflectance spectra with small features in the visible. Results and InterpretationThe analysis confirms the geochemical diversity and ISRU interest in each of the four regions:Aristarchus: Dominated by anorthositic highlands and central peak materials. Steep 1250 nm features in high-albedo spectra confirm plagioclase presence. Pyroxene-rich mare basalts (LCP and HCP) are present. Due to spectral overlap, the identification of spinel units remains inconclusive in this area. Detection of troilite attests to sulfur-bearing mafic lithologies.Malapert: Near the South Lunar Pole, displays pairings of highland and mafic materials. High-Ca pyroxenes and pigeonite are present. A strong 2000 nm band confirms Mg-spinel. This region shows promise for oxygen extraction and construction resource use.Mare Tranquillitatis: Includes high-Ti basalt and ilmenite-bearing units, close to the Dionysius crater. Spectral patterns suggest pyroclastic origins. Feldspathic breccias point to regolith mixing.Leibnitz Crater (Far Side): Exposes diverse terrain including high-Ti basalts, pigeonite-bearing regolith, and highland anorthosites. The diversity is consistent with crustal excavation and impact mixing. Conclusions and OutlookThis study demonstrates the capability of M3 hyperspectral data, laboratory spectra, and advanced spectral algorithms to detect and map key lunar minerals of potential interest for ISRU. Combining quantitative (LSU) and qualitative (SAM) methods enables robust mapping of mineralogical heterogeneity.The results confirm and augment the outcomes of previous missions (e.g., KAGUYA) and provide an extension of the investigation to less characterized and compositionally complex areas such as Leibnitz. Significant ISRU-related substances such as high-Ti basalts (for oxygen...
- 9 July 2025
- Published by Copernicus GmbH
Open AccessHyperspectral Mineral Mapping for Sustainable Lunar Exploration: Targeting ISRU Resources in Key Lunar Regions
Introduction and ObjectivesFor ISRU and sustainable lunar habitats, characterizing the mineralogical heterogeneity of candidate landing sites is critical for identifying regions of high resource potential. This study investigates four geologically diverse lunar regions—Aristarchus, Malapert, Mare Tranquillitatis, and Leibnitz Crater—using data from the Moon Mineralogy Mapper (M³) onboard Chandrayaan-1. The objective is to map mineralogical compositions relevant to resource extraction, supporting future lunar exploration strategies.Site Selection CriteriaThe four regions were selected based on their geological diversity and potential ISRU value. Key mineralogical targets include ilmenite (for oxygen production), anorthosite and plagioclase (for construction materials), and regions enriched in FeO, TiO₂, or Helium-3. Polar regions like Malapert may contain water ice in shadowed areas and offer thermal stability.Site accessibility and terrain complexity were also considered. Although precise landing constraints are mission-specific and still under active assessment, general factors such as surface roughness and illumination conditions can influence the operational feasibility of exploration. The near side supports direct Earth communication, while far side sites like Leibnitz offer long-term strategic value.Availability of high-quality M³ imagery was also essential for ensuring robust mineralogical mapping.M3 Instrument OverviewMoon Mineralogy Mapper (M³) is a high-resolution imaging spectrometer that measured reflectance in the 430-3000 nm range with 10 nm spectral resolution on 85 adjacent bands. Here, calibrated Level 2 products (NASA PDS) have been used that have gone through radiometric, photometric, and thermal corrections (Martinot et al., 2018; Mustard et al., 2011; Staid et al., 2011). Most M³ scenes were captured in global mode, with ~140 m/pixel resolution, adequate for regional-scale mineralogical analysis.Data Preprocessing and SubsettingTo ensure optimal signal quality, two destriping procedures were used: a standard destriping routine and the THOR method to remove striping vertically. Spectral and spatial subsetting was then performed to remove noise bands, black edge effects, and non-relevant pixels. Preprocessing was critical in polar regions like Malapert, where signal degradation dominates. Final datasets typically retained 83 of the initial 85 spectral bands.Hyperspectral Analysis WorkflowThe analysis process used the Spectral Hourglass methodology to derive endmembers and mineral abundance map.Dimensionality Reduction: Minimum Noise Fraction (MNF) transformation was used to reduce data dimensionality without loss of variance. Most scenes had >90% of spectral variance in the first 3–6 MNF components. Endmember Extraction: Pixel Purity Index (PPI) found spectrally pure pixels spectrally, then plotted in the N-Dimensional Visualizer. PPI iterations and thresholds were tuned for each image (~10,000 iterations, threshold ~2.5) to identify stable endmember candidates. Spectral Classification: Linear Spectral Unmixing (LSU) and Spectral Angle Mapper (SAM) were applied. LSU provides sub-pixel abundance maps, and SAM offers angular similarity-based classification, illumination-variation resistance—critical for lunar landscapes. Spectral Library Comparison: Spectra were compared with laboratory reflectance standards of the RELAB database (NASA PDS, 2020) between 540–2990 nm. Target minerals: plagioclase, Ca-pyroxenes, ilmenite, and spinel Mineral Identification CriteriaDiagnostic absorption features were identified by depth, asymmetry, and center wavelength. Continuum subtraction was used to detect key features, especially in space-weathered materials. After Suarez-Valencia et al. (2024), rigorous model selection was employed to minimize false positives.Pyroxenes show characteristic absorptions at 1000 and 2000 nm. Olivine exhibited a broad, asymmetric feature at 1000 nm. Spinel displays a prominent ~2000 nm band. Anorthosite and plagioclase exhibited low absorption near 1250 nm with high total reflectance. Troilite was characterized by flat, low-reflectance spectra with small features in the visible. Results and InterpretationThe analysis confirms the geochemical diversity and ISRU interest in each of the four regions:Aristarchus: Dominated by anorthositic highlands and central peak materials. Steep 1250 nm features in high-albedo spectra confirm plagioclase presence. Pyroxene-rich mare basalts (LCP and HCP) are present. Due to spectral overlap, the identification of spinel units remains inconclusive in this area. Detection of troilite attests to sulfur-bearing mafic lithologies.Malapert: Near the South Lunar Pole, displays pairings of highland and mafic materials. High-Ca pyroxenes and pigeonite are present. A strong 2000 nm band confirms Mg-spinel. This region shows promise for oxygen extraction and construction resource use.Mare Tranquillitatis: Includes high-Ti basalt and ilmenite-bearing units, close to the Dionysius crater. Spectral patterns suggest pyroclastic origins. Feldspathic breccias point to regolith mixing.Leibnitz Crater (Far Side): Exposes diverse terrain including high-Ti basalts, pigeonite-bearing regolith, and highland anorthosites. The diversity is consistent with crustal excavation and impact mixing. Conclusions and OutlookThis study demonstrates the capability of M3 hyperspectral data, laboratory spectra, and advanced spectral algorithms to detect and map key lunar minerals of potential interest for ISRU. Combining quantitative (LSU) and qualitative (SAM) methods enables robust mapping of mineralogical heterogeneity.The results confirm and augment the outcomes of previous missions (e.g., KAGUYA) and provide an extension of the investigation to less characterized and compositionally complex areas such as Leibnitz. Significant ISRU-related substances such as high-Ti basalts (for oxygen...
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
Evaporitic Ecosystems as Analogues for Life Detection:A Study of Makgadikgadi and Tanezrouft Sabkhas
Sabkha environments—marked by temporary water, high salinity, and extreme daily temperature shifts—create conditions that can favor the preservation of biosignatures, or chemical and structural traces of past life. This study examines two contrasting continental sabkha systems: the Makgadikgadi salt pan in Botswana and the Tanezrouft salt flat in Algeria (Franchi et al., 2025; Tarozzi, 2025; Abdelali et al., in prep.).Despite their different locations and climates, both sites display mineral precipitation processes—such as halite, gypsum, and carbonates—that can rapidly trap microbial mats and organic matter. By combining sedimentological, mineralogical, and microbiological data, we explore how these minerals contribute to the early fossilisation of biological material and how post-depositional changes affect its long-term preservation.The results underline the importance of microbial activity, wet-dry cycles, and the in-situ formation of minerals in protecting biosignatures. These findings not only deepen our understanding of how life may be recorded in Earth’s ancient evaporitic environments, but also have strong astrobiological relevance. The processes observed in these sabkhas offer valuable analogues for potential habitable environments on Mars and other planetary bodies, where similar saline and evaporitic conditions may have once existed and where traces of past life might still be preserved. We acknowledge financial support under the NaRonal Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.1, Call for tender No. 104 published on 2.2.2022 by the Italian Ministry of University and Research (MUR), funded by the European Union – NextGeneraRonEU – CUP J53D23001630006 - Grant Assignment Decree No. 2022LFXTKY adopted by the Italian Ministry of Ministry of University and Research (MUR). ReferencesAbdelali A., Pondrelli M., Caddeo Y., Mancini F., Youcef Sellam, Sakina Khallef, Cavalazzi B., IN PREPARATION. Geology of the Ahnet Basin (Southern Algeria) and possible field analogues to Mars. Franchi F., Cassaro A., Cavalazzi B., Lebogang L., Tarozzi A., Kahsay T.H., Pacelli C., 2025. Microbial abundance across a salinity and mineralogical transect in the Ntwetwe Pan of Botswana: A terrestrial analogue for playa deposits on Mars. Planetary and Space Science, 255: 106028. Tarozzi A., 2025. Morphological and compositional characterization of microbiota living in arid environments, the salt crust of the Makgadikgadi Pans, Botswana. Unpublished UNIBO MSc thesis, 70 pages.
- 9 July 2025
- Published by Copernicus GmbH
Open AccessEvaporitic Ecosystems as Analogues for Life Detection:A Study of Makgadikgadi and Tanezrouft Sabkhas
Sabkha environments—marked by temporary water, high salinity, and extreme daily temperature shifts—create conditions that can favor the preservation of biosignatures, or chemical and structural traces of past life. This study examines two contrasting continental sabkha systems: the Makgadikgadi salt pan in Botswana and the Tanezrouft salt flat in Algeria (Franchi et al., 2025; Tarozzi, 2025; Abdelali et al., in prep.).Despite their different locations and climates, both sites display mineral precipitation processes—such as halite, gypsum, and carbonates—that can rapidly trap microbial mats and organic matter. By combining sedimentological, mineralogical, and microbiological data, we explore how these minerals contribute to the early fossilisation of biological material and how post-depositional changes affect its long-term preservation.The results underline the importance of microbial activity, wet-dry cycles, and the in-situ formation of minerals in protecting biosignatures. These findings not only deepen our understanding of how life may be recorded in Earth’s ancient evaporitic environments, but also have strong astrobiological relevance. The processes observed in these sabkhas offer valuable analogues for potential habitable environments on Mars and other planetary bodies, where similar saline and evaporitic conditions may have once existed and where traces of past life might still be preserved. We acknowledge financial support under the NaRonal Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.1, Call for tender No. 104 published on 2.2.2022 by the Italian Ministry of University and Research (MUR), funded by the European Union – NextGeneraRonEU – CUP J53D23001630006 - Grant Assignment Decree No. 2022LFXTKY adopted by the Italian Ministry of Ministry of University and Research (MUR). ReferencesAbdelali A., Pondrelli M., Caddeo Y., Mancini F., Youcef Sellam, Sakina Khallef, Cavalazzi B., IN PREPARATION. Geology of the Ahnet Basin (Southern Algeria) and possible field analogues to Mars. Franchi F., Cassaro A., Cavalazzi B., Lebogang L., Tarozzi A., Kahsay T.H., Pacelli C., 2025. Microbial abundance across a salinity and mineralogical transect in the Ntwetwe Pan of Botswana: A terrestrial analogue for playa deposits on Mars. Planetary and Space Science, 255: 106028. Tarozzi A., 2025. Morphological and compositional characterization of microbiota living in arid environments, the salt crust of the Makgadikgadi Pans, Botswana. Unpublished UNIBO MSc thesis, 70 pages.
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
ArchiSpace: Space Architecture Design and Prototyping in Planetary Analogue Environments
IntroductionThis decade marks our goal to return to the Moon—this time, to stay.It is therefore crucial to develop reliable and safe settlements that adequately protect astronaut’s physical and mental well-being from all possible threats that the hostile environment of extraterrestrial space presents.ArchiSpace aims to design and build sub-system prototypes (e.g., floors, walls, roofs, etc.) of human infrastructures to be built on planetary surfaces, which will be tested in analogue environments on-Earth. This project represents the first effort, to the best of our knowledge, to use a combination of environmental and geological setting analogues as a base to define architectural constraints, sketch design and prototypes to be used in future space human settlements.ArchiSpace is pioneering a new field of interdisciplinary and intersectoral research in Europe by bridging geology/space sciences and on-/off-Earth architecture. Geology/space science is crucial because the subsurface plays a fundamental role in the selection of the landing sites and the location of 'human-focused' habitats. Architecture has a key role in designing comfortable, safe and functional habitats both for on- and off-Earth applications. Our complementary partners are leaders in their respective sectors and hold the necessary know-how and/or technology level to achieve the ArchiSpace objectives. In addition, the human settlements to be developed will involve innovative low impact, low cost and light operations and ISRU materials.This sustainable planetary approach has off-Earth & on-earth implementations. The project will create, through the planned secondments, common standards, methods and prototypes for the development of space bases on Moon and Mars; which will be tested in three joint field activities (e.g., in Moroccan analogue sites).Thus, ArchiSpace promotes an innovative international, inter-sectoral and interdisciplinary research and innovation collaboration that will contribute to Europe's competitiveness and growth.Methodology:The ArchiSpace project integrates multidisciplinary expertise to develop innovative infrastructures for extreme environments (Moon, Mars, and terrestrial analogs). The methodology includes planning, designing, and constructing prototypes, leveraging planetary sciences, architecture, engineering, and advanced 3D printing techniques. The outcomes aim to support both space exploration and terrestrial applications.Researchers and architects will participate in this multi-disciplinary project through 11 Work Packages (WPs). WP1 to WP8 will focus on specific requirements of different end-user communities with a field demonstration. Several planetary and terrestrial environmental conditions and specific needs (for science, applied geotechnical and environmental aspects, architectural and design integration aspects, habitability aspects, etc.) will be modelled and examined linked to field training/test realization. The sets of data and examples produced will provide practical knowledge to additional European partners, including companies, to contribute to ESA’s and NASA’s efforts in the planning and preparation of the first human Mars mission. All researchers involved will have an opportunity to discern beyond their specific field and to perceive construction techniques in a larger framework. Using the produced innovations, WP9 to WP11 will use these in the Knowledge Transfer, Training, Dissemination and Exploitation actions.The project ArchiSpace consists of two major actions: (i) planning of the executable project integrating cross-disciplinary know-how (by applying planetary science-based methods and knowledge to Earth based locations) and (ii) the construction of subsytem prototypes (e.g., foundations, floor, wall, roof, etc) and a 3D virtual habitat. ConclusionThe outcome of the ArchiSpace project will be the realization of tangible space architecture subsystem designs, bringing the vision of sustainable human settlements into Space. This vision will position ArchiSpace as a trailblazer in the field of Space architecture, providing valuable insights and practical solutions for future Space exploration efforts. The project's unique focus on both the design of Space habitats and geological/geomorphological environmental adaptation, through Earth analogues to test and refine the project, technologies, and procedures; is expected to greatly advance our understanding of the challenges and opportunities involved in establishing human settlements on the Moon and Mars.Overall, the ArchiSpace project offers a rare opportunity to shape the future of Space architecture and contribute to Solar System exploration. The transfer of the innovative architecture designs to the market will be provided by the participating companies after the termination of this project and could be applied in Europe to low-income Earth-based communities.AcknowledgementThis project was supported by the EU HORIZON-MSCA-2023-SE-01 Grant agreement ID: 101183089.
- 9 July 2025
- Published by Copernicus GmbH
Open AccessArchiSpace: Space Architecture Design and Prototyping in Planetary Analogue Environments
IntroductionThis decade marks our goal to return to the Moon—this time, to stay.It is therefore crucial to develop reliable and safe settlements that adequately protect astronaut’s physical and mental well-being from all possible threats that the hostile environment of extraterrestrial space presents.ArchiSpace aims to design and build sub-system prototypes (e.g., floors, walls, roofs, etc.) of human infrastructures to be built on planetary surfaces, which will be tested in analogue environments on-Earth. This project represents the first effort, to the best of our knowledge, to use a combination of environmental and geological setting analogues as a base to define architectural constraints, sketch design and prototypes to be used in future space human settlements.ArchiSpace is pioneering a new field of interdisciplinary and intersectoral research in Europe by bridging geology/space sciences and on-/off-Earth architecture. Geology/space science is crucial because the subsurface plays a fundamental role in the selection of the landing sites and the location of 'human-focused' habitats. Architecture has a key role in designing comfortable, safe and functional habitats both for on- and off-Earth applications. Our complementary partners are leaders in their respective sectors and hold the necessary know-how and/or technology level to achieve the ArchiSpace objectives. In addition, the human settlements to be developed will involve innovative low impact, low cost and light operations and ISRU materials.This sustainable planetary approach has off-Earth & on-earth implementations. The project will create, through the planned secondments, common standards, methods and prototypes for the development of space bases on Moon and Mars; which will be tested in three joint field activities (e.g., in Moroccan analogue sites).Thus, ArchiSpace promotes an innovative international, inter-sectoral and interdisciplinary research and innovation collaboration that will contribute to Europe's competitiveness and growth.Methodology:The ArchiSpace project integrates multidisciplinary expertise to develop innovative infrastructures for extreme environments (Moon, Mars, and terrestrial analogs). The methodology includes planning, designing, and constructing prototypes, leveraging planetary sciences, architecture, engineering, and advanced 3D printing techniques. The outcomes aim to support both space exploration and terrestrial applications.Researchers and architects will participate in this multi-disciplinary project through 11 Work Packages (WPs). WP1 to WP8 will focus on specific requirements of different end-user communities with a field demonstration. Several planetary and terrestrial environmental conditions and specific needs (for science, applied geotechnical and environmental aspects, architectural and design integration aspects, habitability aspects, etc.) will be modelled and examined linked to field training/test realization. The sets of data and examples produced will provide practical knowledge to additional European partners, including companies, to contribute to ESA’s and NASA’s efforts in the planning and preparation of the first human Mars mission. All researchers involved will have an opportunity to discern beyond their specific field and to perceive construction techniques in a larger framework. Using the produced innovations, WP9 to WP11 will use these in the Knowledge Transfer, Training, Dissemination and Exploitation actions.The project ArchiSpace consists of two major actions: (i) planning of the executable project integrating cross-disciplinary know-how (by applying planetary science-based methods and knowledge to Earth based locations) and (ii) the construction of subsytem prototypes (e.g., foundations, floor, wall, roof, etc) and a 3D virtual habitat. ConclusionThe outcome of the ArchiSpace project will be the realization of tangible space architecture subsystem designs, bringing the vision of sustainable human settlements into Space. This vision will position ArchiSpace as a trailblazer in the field of Space architecture, providing valuable insights and practical solutions for future Space exploration efforts. The project's unique focus on both the design of Space habitats and geological/geomorphological environmental adaptation, through Earth analogues to test and refine the project, technologies, and procedures; is expected to greatly advance our understanding of the challenges and opportunities involved in establishing human settlements on the Moon and Mars.Overall, the ArchiSpace project offers a rare opportunity to shape the future of Space architecture and contribute to Solar System exploration. The transfer of the innovative architecture designs to the market will be provided by the participating companies after the termination of this project and could be applied in Europe to low-income Earth-based communities.AcknowledgementThis project was supported by the EU HORIZON-MSCA-2023-SE-01 Grant agreement ID: 101183089.
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
Noachian-Hesperian Sedimentary Evolution of Arabia Terra, Mars: Preliminary Insights
IntroductionThe documented climate change on Mars between the late Noachian and the Hesperian marked a shift from relatively humid to arid-cold conditions (e.g., McLennan et al., 2019 and references therein). While the broad trajectory of this evolution is established, the controlling factors, the contribution of periodic versus episodic events, and the precise timing remain largely unresolved. Sedimentary deposits are key archives of past environments and of their changes through time. Arabia Terra represents a key region for analyzing these records. Unlike most of Mars, it is a gently sloping region that links southern highlands and northern lowlands (Fig. 1), allowing for a more extensive distribution of sedimentary environments. Moreover, the region hosts abundant and well-preserved sedimentary landforms and deposits exhibiting stratigraphic, geomorphological, and mineralogical characteristics (e.g., Pondrelli et al. 2015; Davis et al., 2016; Salese et al., 2019; Schmidt et al., 2021). We aim to reconstruct the lateral distribution (environment associations) and vertical evolution (stratigraphic trend) of these deposits and morphologies. Here, we present our preliminary results based on both new analyses and critical reassessment of existing literature, with the goal of defining the elements for a future cartographic legend.Data and MethodsOur approach combines regional-scale and basin-scale analyses. At the regional level, we employed Thermal Emission Imaging System (THEMIS) imagery (resolution ~100 m/pixel) and Context Camera (CTX) data (~6 m/pixel), supported by digital elevation models (DEMs) derived from High Resolution Stereo Camera (HRSC) data (~50 m vertical resolution). For finer-scale analyses, in areas with pristine preservation of deposits/features and high-resolution data availability, CTX data were integrated with High Resolution Imaging Science Experiment (HiRISE) images (~30 cm/pixel). Topographic data at this scale were obtained using stereo-pairs from CTX (~12 m/pixel vertical resolution) and HiRISE (~1 m/pixel vertical resolution), processed with NASA’s Ames Stereo Pipeline. Preliminary compositional data were derived from the Mars ACT-REACT QuickMap interface, allowing for the identification of mineral phases based on CRISM data.Sedimentary Deposits in Arabia TerraSedimentary materials in Arabia Terra dating to the Noachian and Hesperian periods can be broadly classified into two main types: fluvio-lacustrine deposits, which are relatively well understood in terms of origin and processes and light-toned layered deposits (LTDs), whose genetic interpretations remain debated.Phyllosilicate-bearing fluvial channels have been documented in intercrater plains (e.g., Davis et al., 2016), sometimes forming part of open-lake systems. These channels can be either incised or exhumed, reflecting the differential erosion of previously existing floodplain sediments (Fig. 2A). Closed paleolacustrine systems have been observed within deep craters (Salese et al., 2019), hydrologically isolated from surrounding intercrater plains and interpreted to have been fed primarily by groundwater upwelling through sapping channels (Fig. 2B). Deltas associated with these systems show evidence for water level fluctuations, ultimately culminating in lake-level decline and desiccation.The fluvio-lacustrine systems are locally overlain by LTDs in both intercrater and intracrater settings (Fig. 2A). Intercrater LTDs display etched or flat-lying surfaces shaped by wind erosion, though locally they show duneforms and evidence of cross-bedding. LTDs mineralogy shows a latitudinal trend: phyllosilicates dominate in northern Arabia Terra, while sulfates are more common in the south. In some locations, a gradual vertical transition from clay-rich to sulfate-rich layers has been identified, reminiscent of those documented in Meridiani Planum (Flahaut et al., 2015).Intracrater LTDs can form crater bulges or flat surfaces and may display features such as terraces or erosional bedrock channels cutting the inner crater rim (Fig. 2C). Their thickness appears to decrease northward (Schmidt et al., 2021), reaching > 2 km where crater-centered bulges are developed (Pondrelli et al., 2015).Some LTDs may have formed in hydrothermal settings. This hypothesis is supported by the presence of mineral assemblages such as Mg–Fe phyllosilicates and carbonates (Michalski et al., 2013), as well as by the occurrence of filled fractures and mounds that suggest fluid expulsion. Although some of these features may be erosional remnants, others appear as depositional (Fig. 2D), based on their shape and their relationships with potential erosional patterns (i.e., wind direction).Future WorkThe next phase will involve systematic mapping of the distribution of the presented elements at a regional scale with associated metadata, including their geometries (qualitative-quantitative), stratigraphic relationships, and compositional characteristics. Depositional processes and stratigraphic evolution will be refined using detailed geological mapping of selected key areas. In addition, published geologic maps will be updated to incorporate recent hyperspectral data into the legend description. AcknowledgmentsWe acknowledge financial support under the National Recovery and Resilience Plan, Mission 4, Component 2, Investment 1.1, Call for tender No. 104 published on 2.2.2022 by the Italian Ministry of University and Research, funded by the European Union – NextGenerationEU–Project Title Tanezrouft salt flat deposits (Sahara Desert): a priority target for a Mars Sample Return mission – CUP D53D23002600006 - Grant Assignment Decree No. 962 adopted on 30/06/2023 by the Italian Ministry of Ministry of University and Research.This study was carried out within the Space It Up project funded by the Italian Space Agency, ASI, and the Ministry of University and Research, under contract n. 2024-5-E.0 - CUP n....
- 9 July 2025
- Published by Copernicus GmbH
Open AccessNoachian-Hesperian Sedimentary Evolution of Arabia Terra, Mars: Preliminary Insights
IntroductionThe documented climate change on Mars between the late Noachian and the Hesperian marked a shift from relatively humid to arid-cold conditions (e.g., McLennan et al., 2019 and references therein). While the broad trajectory of this evolution is established, the controlling factors, the contribution of periodic versus episodic events, and the precise timing remain largely unresolved. Sedimentary deposits are key archives of past environments and of their changes through time. Arabia Terra represents a key region for analyzing these records. Unlike most of Mars, it is a gently sloping region that links southern highlands and northern lowlands (Fig. 1), allowing for a more extensive distribution of sedimentary environments. Moreover, the region hosts abundant and well-preserved sedimentary landforms and deposits exhibiting stratigraphic, geomorphological, and mineralogical characteristics (e.g., Pondrelli et al. 2015; Davis et al., 2016; Salese et al., 2019; Schmidt et al., 2021). We aim to reconstruct the lateral distribution (environment associations) and vertical evolution (stratigraphic trend) of these deposits and morphologies. Here, we present our preliminary results based on both new analyses and critical reassessment of existing literature, with the goal of defining the elements for a future cartographic legend.Data and MethodsOur approach combines regional-scale and basin-scale analyses. At the regional level, we employed Thermal Emission Imaging System (THEMIS) imagery (resolution ~100 m/pixel) and Context Camera (CTX) data (~6 m/pixel), supported by digital elevation models (DEMs) derived from High Resolution Stereo Camera (HRSC) data (~50 m vertical resolution). For finer-scale analyses, in areas with pristine preservation of deposits/features and high-resolution data availability, CTX data were integrated with High Resolution Imaging Science Experiment (HiRISE) images (~30 cm/pixel). Topographic data at this scale were obtained using stereo-pairs from CTX (~12 m/pixel vertical resolution) and HiRISE (~1 m/pixel vertical resolution), processed with NASA’s Ames Stereo Pipeline. Preliminary compositional data were derived from the Mars ACT-REACT QuickMap interface, allowing for the identification of mineral phases based on CRISM data.Sedimentary Deposits in Arabia TerraSedimentary materials in Arabia Terra dating to the Noachian and Hesperian periods can be broadly classified into two main types: fluvio-lacustrine deposits, which are relatively well understood in terms of origin and processes and light-toned layered deposits (LTDs), whose genetic interpretations remain debated.Phyllosilicate-bearing fluvial channels have been documented in intercrater plains (e.g., Davis et al., 2016), sometimes forming part of open-lake systems. These channels can be either incised or exhumed, reflecting the differential erosion of previously existing floodplain sediments (Fig. 2A). Closed paleolacustrine systems have been observed within deep craters (Salese et al., 2019), hydrologically isolated from surrounding intercrater plains and interpreted to have been fed primarily by groundwater upwelling through sapping channels (Fig. 2B). Deltas associated with these systems show evidence for water level fluctuations, ultimately culminating in lake-level decline and desiccation.The fluvio-lacustrine systems are locally overlain by LTDs in both intercrater and intracrater settings (Fig. 2A). Intercrater LTDs display etched or flat-lying surfaces shaped by wind erosion, though locally they show duneforms and evidence of cross-bedding. LTDs mineralogy shows a latitudinal trend: phyllosilicates dominate in northern Arabia Terra, while sulfates are more common in the south. In some locations, a gradual vertical transition from clay-rich to sulfate-rich layers has been identified, reminiscent of those documented in Meridiani Planum (Flahaut et al., 2015).Intracrater LTDs can form crater bulges or flat surfaces and may display features such as terraces or erosional bedrock channels cutting the inner crater rim (Fig. 2C). Their thickness appears to decrease northward (Schmidt et al., 2021), reaching > 2 km where crater-centered bulges are developed (Pondrelli et al., 2015).Some LTDs may have formed in hydrothermal settings. This hypothesis is supported by the presence of mineral assemblages such as Mg–Fe phyllosilicates and carbonates (Michalski et al., 2013), as well as by the occurrence of filled fractures and mounds that suggest fluid expulsion. Although some of these features may be erosional remnants, others appear as depositional (Fig. 2D), based on their shape and their relationships with potential erosional patterns (i.e., wind direction).Future WorkThe next phase will involve systematic mapping of the distribution of the presented elements at a regional scale with associated metadata, including their geometries (qualitative-quantitative), stratigraphic relationships, and compositional characteristics. Depositional processes and stratigraphic evolution will be refined using detailed geological mapping of selected key areas. In addition, published geologic maps will be updated to incorporate recent hyperspectral data into the legend description. AcknowledgmentsWe acknowledge financial support under the National Recovery and Resilience Plan, Mission 4, Component 2, Investment 1.1, Call for tender No. 104 published on 2.2.2022 by the Italian Ministry of University and Research, funded by the European Union – NextGenerationEU–Project Title Tanezrouft salt flat deposits (Sahara Desert): a priority target for a Mars Sample Return mission – CUP D53D23002600006 - Grant Assignment Decree No. 962 adopted on 30/06/2023 by the Italian Ministry of Ministry of University and Research.This study was carried out within the Space It Up project funded by the Italian Space Agency, ASI, and the Ministry of University and Research, under contract n. 2024-5-E.0 - CUP n....
- Open Access
- 3 July 2024
- Published by Copernicus GmbH
Testing the FlyRadar instrument in glacial environment on Earth for future ice/water investigations on Mars
IntroductionThe goal of the FlyRadar project (a 2020 Horizon 2020 MSCA-RISE project funded by the European Commission) was to design and develop a multimodal Ground Penetrating Radar (GPR) and Synthetic Aperture Radar (SAR), multi-frequency radar system installed on an Unmanned Aerial Vehicle (UAV), tailored for exploration on Mars, and validated through testing on Earth (Figure 1).Figure 1: The FlyRadar instrument. The radar’s GPS is fixed to the drone’s battery in the center. A GoPro camera was added to film the ground.A GPR is an active remote sensing instrument that emits electromagnetic waves and detects the waves reflected by discontinuities on the surface of the planet or contrasts in permittivity within its subsurface. Analysis of these echoes yields geometric and geological information about subsurface features, typically penetrating to depth of approximately 100 meters, contingent upon the permittivity of the material being surveyed.The search for extraterrestrial resources, like ice or water, has been a key scientific objective in the human exploration of the solar system, with Mars being the second closest terrestrial planet and the most likely candidate to have ice/water resources [1]. Airborn surveys will be essential in both robotic and human exploration missions. The FlyRadar consortium's scientific team is also currently involved in some recent space exploration missions such as Mars Ice Mapper [2].FlyRadar's scientific test campaigns have been planned, with an initial test scheduled in the glacial environment of the Alps followed by testing in the arid environment of Morocco. These tests aim to evaluate the integrated system capabilities in terms of operations and scientific data quality.Testing area: the Miage GlacierThe Miage Glacier, as the most representative debris-covered glacier in Italy, serves as a crucial site for multidisciplinary scientific research. The Miage Glacier is located in the Veny Valley on the SE flank of Mont Blanc massif in the Alps (Italy, Valle d'Aosta, Courmayeur; Figure 2). Miage is a valley glacier, and it covers an area of 11 km2. The front of the right glacier tongue terminates at an elevation of 1730 m. The glacier is bordered by steep walls and exposed towards south-east.The entire lower 6500 m of the glacier up to the elevation of 2450 m is completely covered with debris. It is 41,5 % of the total area. Mean slope of the debris cover surface is 6° (for the right tongue). Inner part of debris cover has hummocky surface with a lot of thermokarst depressions sometimes with lakes. Most often, there are no clearly defined ridges, but there are coloured stripes along the glacier in accordance with the debris lithology. The edges of the debris cover are represented by steep slopes. The average value of debris cover thickness is around 20-40 cm (Mihalcea et al., 2008). The maximum value is around 50-60 cm in the lowest parts of the lobes. The debris was accumulated here because of glacial ablation.Figure 2: The debris-covered Miage Glacier.Conclusion Future space missions will extensively use drones for several tasks. It will be important for the analysis of the subsurface for scientific purposes but also for technical reasons (to identify subsurface water or ice, 3D mapping of geological features, to support infrastructure deployment on the surface, identification of resources, etc.). Although drones are going to be applied, there is a gap in space industry regarding the construction of low weight, low energy consumption and robust SAR systems that is exploited by the FlyRadar project. The aim of the FlyRadar project is to develop, test and build a radar system able to work in both GPR and SAR mode installed on board a UAV. Planned tests in glacial and arid areas at analog sites on Earth will aid in refining and optimizing the instrument, establishing a workflow to prepare it for Mars exploration.AcknowledgementThe FlyRadar project was supported by the EU H2020-MSCA-RISE-2020 Grant agreement ID: 101007973.References[1] Nazari-Sharabian M., et al., 2020. Galaxies, 8(2), p.40.[2] Amoroso M. et al., 2024. No. EGU24-10754 Copernicus Meetings.[3] Mihalcea C. et al., 2008. Cold Regions Science and Technology, 52(3), pp.341-354.
- 3 July 2024
- Published by Copernicus GmbH
Open AccessTesting the FlyRadar instrument in glacial environment on Earth for future ice/water investigations on Mars
IntroductionThe goal of the FlyRadar project (a 2020 Horizon 2020 MSCA-RISE project funded by the European Commission) was to design and develop a multimodal Ground Penetrating Radar (GPR) and Synthetic Aperture Radar (SAR), multi-frequency radar system installed on an Unmanned Aerial Vehicle (UAV), tailored for exploration on Mars, and validated through testing on Earth (Figure 1).Figure 1: The FlyRadar instrument. The radar’s GPS is fixed to the drone’s battery in the center. A GoPro camera was added to film the ground.A GPR is an active remote sensing instrument that emits electromagnetic waves and detects the waves reflected by discontinuities on the surface of the planet or contrasts in permittivity within its subsurface. Analysis of these echoes yields geometric and geological information about subsurface features, typically penetrating to depth of approximately 100 meters, contingent upon the permittivity of the material being surveyed.The search for extraterrestrial resources, like ice or water, has been a key scientific objective in the human exploration of the solar system, with Mars being the second closest terrestrial planet and the most likely candidate to have ice/water resources [1]. Airborn surveys will be essential in both robotic and human exploration missions. The FlyRadar consortium's scientific team is also currently involved in some recent space exploration missions such as Mars Ice Mapper [2].FlyRadar's scientific test campaigns have been planned, with an initial test scheduled in the glacial environment of the Alps followed by testing in the arid environment of Morocco. These tests aim to evaluate the integrated system capabilities in terms of operations and scientific data quality.Testing area: the Miage GlacierThe Miage Glacier, as the most representative debris-covered glacier in Italy, serves as a crucial site for multidisciplinary scientific research. The Miage Glacier is located in the Veny Valley on the SE flank of Mont Blanc massif in the Alps (Italy, Valle d'Aosta, Courmayeur; Figure 2). Miage is a valley glacier, and it covers an area of 11 km2. The front of the right glacier tongue terminates at an elevation of 1730 m. The glacier is bordered by steep walls and exposed towards south-east.The entire lower 6500 m of the glacier up to the elevation of 2450 m is completely covered with debris. It is 41,5 % of the total area. Mean slope of the debris cover surface is 6° (for the right tongue). Inner part of debris cover has hummocky surface with a lot of thermokarst depressions sometimes with lakes. Most often, there are no clearly defined ridges, but there are coloured stripes along the glacier in accordance with the debris lithology. The edges of the debris cover are represented by steep slopes. The average value of debris cover thickness is around 20-40 cm (Mihalcea et al., 2008). The maximum value is around 50-60 cm in the lowest parts of the lobes. The debris was accumulated here because of glacial ablation.Figure 2: The debris-covered Miage Glacier.Conclusion Future space missions will extensively use drones for several tasks. It will be important for the analysis of the subsurface for scientific purposes but also for technical reasons (to identify subsurface water or ice, 3D mapping of geological features, to support infrastructure deployment on the surface, identification of resources, etc.). Although drones are going to be applied, there is a gap in space industry regarding the construction of low weight, low energy consumption and robust SAR systems that is exploited by the FlyRadar project. The aim of the FlyRadar project is to develop, test and build a radar system able to work in both GPR and SAR mode installed on board a UAV. Planned tests in glacial and arid areas at analog sites on Earth will aid in refining and optimizing the instrument, establishing a workflow to prepare it for Mars exploration.AcknowledgementThe FlyRadar project was supported by the EU H2020-MSCA-RISE-2020 Grant agreement ID: 101007973.References[1] Nazari-Sharabian M., et al., 2020. Galaxies, 8(2), p.40.[2] Amoroso M. et al., 2024. No. EGU24-10754 Copernicus Meetings.[3] Mihalcea C. et al., 2008. Cold Regions Science and Technology, 52(3), pp.341-354.