Zhang Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhang Chen has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
- Yang Deng
Tsinghua University
9 shared publications - Bin Liang
Tsinghua University
6 shared publications Bin Liang
Tsinghua University
5 shared publications- Yiyong Sun
School of Aerospace Engineering, Beijing Institute of Technology, Beijing, China
4 shared publications - Emmanuel Moulay
XLIM (UMR CNRS 7252), Universit de Poitiers, Poitiers, France
3 shared publications - Franck Plestan
Nantes Université, Ecole Centrale Nantes, CNRS, LS2N, UMR 6004, Nantes, F-44000, France
3 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Systems, Man, and Cybernetics: Systems
- Vol. 56 (11) , 7112-7125
Fixed-Time Prescribed Performance Super-Twisting Control With State-Dependent Variable Exponents for a Class of Nonlinear Systems
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Systems, Man, and Cybernetics: Systems
- Vol. 56 (11) , 7112-7125
Fixed-Time Prescribed Performance Super-Twisting Control With State-Dependent Variable Exponents for a Class of Nonlinear Systems
- 27 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-13
Composite Disturbance Rejection Control of Continuum Robots Based on Fractional-Order Equivalent-Input-Disturbance Estimation for Multitype Disturbances
Continuum robots, with their inherent compliance, are well-suited for unstructured environments but encounter significant challenges in achieving high-precision motion control due to the complexities of dynamic modeling and multisource disturbances in operational scenarios. This article proposes a composite disturbance rejection control strategy for a continuum robot based on the introduced fractional-order equivalent input disturbance (FEID) estimator, which systematically addresses constant disturbances, ramp disturbances, and model uncertainties. The nonlinear dynamics of the continuum robot is algebraically transformed into a linear system using the feedback linearization method. Disturbances equivalent to the input channel are then estimated by the FEID estimator, enabling effective suppression of both constant and ramp disturbances. A feedback proportional derivative (PD) controller is subsequently designed for the equivalent linear system to achieve optimal dynamic tracking performance. A frequency-domain-based suppression analysis is provided for multiple disturbance types, followed by a stability analysis of the proposed FEID estimator and the closed-loop system. Furthermore, a parameter tuning method for the proposed control strategy is introduced, based on frequency-domain indicators. Finally, experimental validation demonstrates the effectiveness of the proposed control strategy in trajectories tracking and disturbance rejection, outperforming other optimal typical equivalent input disturbance-based controller, active disturbance rejection controller, PID controller, fractional PID (FPID), fractional active disturbance rejection controller (FADRC), and disturbance-rejection PID (DRPID) controller.
- 27 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-13
Composite Disturbance Rejection Control of Continuum Robots Based on Fractional-Order Equivalent-Input-Disturbance Estimation for Multitype Disturbances
Continuum robots, with their inherent compliance, are well-suited for unstructured environments but encounter significant challenges in achieving high-precision motion control due to the complexities of dynamic modeling and multisource disturbances in operational scenarios. This article proposes a composite disturbance rejection control strategy for a continuum robot based on the introduced fractional-order equivalent input disturbance (FEID) estimator, which systematically addresses constant disturbances, ramp disturbances, and model uncertainties. The nonlinear dynamics of the continuum robot is algebraically transformed into a linear system using the feedback linearization method. Disturbances equivalent to the input channel are then estimated by the FEID estimator, enabling effective suppression of both constant and ramp disturbances. A feedback proportional derivative (PD) controller is subsequently designed for the equivalent linear system to achieve optimal dynamic tracking performance. A frequency-domain-based suppression analysis is provided for multiple disturbance types, followed by a stability analysis of the proposed FEID estimator and the closed-loop system. Furthermore, a parameter tuning method for the proposed control strategy is introduced, based on frequency-domain indicators. Finally, experimental validation demonstrates the effectiveness of the proposed control strategy in trajectories tracking and disturbance rejection, outperforming other optimal typical equivalent input disturbance-based controller, active disturbance rejection controller, PID controller, fractional PID (FPID), fractional active disturbance rejection controller (FADRC), and disturbance-rejection PID (DRPID) controller.
- 12 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (1) , 522-529
ATOM: A Tendon-Driven Aerial Manipulator Achieving High Stiffness, High Torque, and Low Coupling Disturbance
Aerial manipulator systems (AMSs) have significantly progressed in air-ground collaborative tasks. Deploying high-stiffness and high-torque manipulators in AMSs can enhance operational robustness, enabling the execution of more demanding tasks such as high-altitude platforms operation, post-disaster rapid response and assisted rescue. However, this is challenging due to the significant coupling disturbance (CPD) induced by the substantial mass and inertia of high-torque joint actuators. To address this issue, we introduce the aerial tendon-driven manipulator (ATOM), which integrates a multirotor with a 4-DOF anthropomorphic tendon-driven serial manipulator. This design minimizes CPD while preserving high-stiffness and high-torque. Our approach begins with an analysis of the CPD model inherent in AMSs, guiding the development of our design concept. In detail, the joints incorporate a tension-amplification-tendon mechanism, significantly enhancing overall stiffness and torque. The links are optimized using finite element topology and lattice optimization techniques, mimicking the radially graded structure found in bone. This bio-inspired design effectively reduces weight and inertia while maximizing structural rigidity. To ensure consistent performance, we have also developed a novel pretension mechanism that allows for adjustable cable tension, preventing unwanted cable relaxation. Experimental validation demonstrates that the ATOM can achieve high-stiffness and high-torque with minimal CPD while exhibiting robust waterproof performance, showcasing its potential for advanced air-ground collaborative tasks.
- 12 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (1) , 522-529
ATOM: A Tendon-Driven Aerial Manipulator Achieving High Stiffness, High Torque, and Low Coupling Disturbance
Aerial manipulator systems (AMSs) have significantly progressed in air-ground collaborative tasks. Deploying high-stiffness and high-torque manipulators in AMSs can enhance operational robustness, enabling the execution of more demanding tasks such as high-altitude platforms operation, post-disaster rapid response and assisted rescue. However, this is challenging due to the significant coupling disturbance (CPD) induced by the substantial mass and inertia of high-torque joint actuators. To address this issue, we introduce the aerial tendon-driven manipulator (ATOM), which integrates a multirotor with a 4-DOF anthropomorphic tendon-driven serial manipulator. This design minimizes CPD while preserving high-stiffness and high-torque. Our approach begins with an analysis of the CPD model inherent in AMSs, guiding the development of our design concept. In detail, the joints incorporate a tension-amplification-tendon mechanism, significantly enhancing overall stiffness and torque. The links are optimized using finite element topology and lattice optimization techniques, mimicking the radially graded structure found in bone. This bio-inspired design effectively reduces weight and inertia while maximizing structural rigidity. To ensure consistent performance, we have also developed a novel pretension mechanism that allows for adjustable cable tension, preventing unwanted cable relaxation. Experimental validation demonstrates that the ATOM can achieve high-stiffness and high-torque with minimal CPD while exhibiting robust waterproof performance, showcasing its potential for advanced air-ground collaborative tasks.
- 3 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (2) , 1775-1785
Design and Experimental Evaluation of a Dual-Mode Soft Pneumatic Actuator
Pneumatic soft actuators are pivotal in improving the safety of human-robot interactions. However, the portability of current pneumatic actuators is often hindered by their suppliers’ large size and mass. Although some portable gas suppliers demonstrate their portability superiority, they usually lack the necessary explosive output capability due to slow gas generation rates, thus limiting their utility in high-performance mobile robots. To address this issue, this article proposes a compact dual-modal soft pneumatic actuator (DSPA) with explosive driving capability. The DSPA utilizes the reaction of Calcium Carbide and Sodium Peroxide with water to generate Acetylene and Oxygen to drive mechanical loads. Furthermore, these gases can be ignited to rapidly produce high-pressure output for explosive driving. The experimental prototype of DSPA weighs approximately 97.4 g. When fueled with 30 ms of fuel, the DSPA can exert a force capable of moving loads greater than 500% of its weight by approximately 20 mm. The calculated driving power of the pneumatic actuator exceeds 9.62 W, making it suitable for high-performance pneumatic robotic applications.
- 3 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (2) , 1775-1785
Design and Experimental Evaluation of a Dual-Mode Soft Pneumatic Actuator
Pneumatic soft actuators are pivotal in improving the safety of human-robot interactions. However, the portability of current pneumatic actuators is often hindered by their suppliers’ large size and mass. Although some portable gas suppliers demonstrate their portability superiority, they usually lack the necessary explosive output capability due to slow gas generation rates, thus limiting their utility in high-performance mobile robots. To address this issue, this article proposes a compact dual-modal soft pneumatic actuator (DSPA) with explosive driving capability. The DSPA utilizes the reaction of Calcium Carbide and Sodium Peroxide with water to generate Acetylene and Oxygen to drive mechanical loads. Furthermore, these gases can be ignited to rapidly produce high-pressure output for explosive driving. The experimental prototype of DSPA weighs approximately 97.4 g. When fueled with 30 ms of fuel, the DSPA can exert a force capable of moving loads greater than 500% of its weight by approximately 20 mm. The calculated driving power of the pneumatic actuator exceeds 9.62 W, making it suitable for high-performance pneumatic robotic applications.
- 11 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 21057-21069
Hierarchical Adaptive Control Framework for Autonomous Bicycles: Integrating Residual Decisions and Dynamic Optimization
This paper introduces the Adaptive Residual Decision-Control Synthesis (ARDCS) framework, a hierarchical control architecture that synergizes a model-based Linear Quadratic Regulator (LQR) with an adaptive Dynamic Proximal Policy Optimization (DPPO) agent for autonomous bicycle control. ARDCS is designed to master the bicycle’s complex nonlinear dynamics and adapt to environmental uncertainties by leveraging the stability of traditional control with the flexibility of reinforcement learning. A key innovation is a momentum-enhanced dynamic entropy adjustment mechanism within DPPO, which optimizes the exploration-exploitation trade-off for more stable and efficient learning. Comprehensive experiments on balancing and multi-target navigation tasks demonstrate that ARDCS consistently and significantly outperforms both conventional control methods and pure reinforcement learning strategies across varying levels of difficulty. The framework achieves enhanced adaptability and robust stability without relying on auxiliary mechanical stabilizers, offering a potent and generalizable solution for the control of under-actuated systems.
- 11 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 21057-21069
Hierarchical Adaptive Control Framework for Autonomous Bicycles: Integrating Residual Decisions and Dynamic Optimization
This paper introduces the Adaptive Residual Decision-Control Synthesis (ARDCS) framework, a hierarchical control architecture that synergizes a model-based Linear Quadratic Regulator (LQR) with an adaptive Dynamic Proximal Policy Optimization (DPPO) agent for autonomous bicycle control. ARDCS is designed to master the bicycle’s complex nonlinear dynamics and adapt to environmental uncertainties by leveraging the stability of traditional control with the flexibility of reinforcement learning. A key innovation is a momentum-enhanced dynamic entropy adjustment mechanism within DPPO, which optimizes the exploration-exploitation trade-off for more stable and efficient learning. Comprehensive experiments on balancing and multi-target navigation tasks demonstrate that ARDCS consistently and significantly outperforms both conventional control methods and pure reinforcement learning strategies across varying levels of difficulty. The framework achieves enhanced adaptability and robust stability without relying on auxiliary mechanical stabilizers, offering a potent and generalizable solution for the control of under-actuated systems.
- 31 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (1) , 336-347
Design and Experiment of a Chemo-Mechatronic Hybrid Robotic Actuator With Explosive Driving Capability
The robotic actuator has emerged as a pivotal component that dictates the mobility and application scope of various robots. Currently, the robotic actuator faces significant challenges in power density, making it difficult to meet the demand for instantaneous high-power output underweight and volume limits. In response to this challenge, this article proposes a chemo-mechatronic hybrid robotic actuator with explosive driving capability (CMHRA), aiming to achieve a bimodal actuator capable of delivering high-precision conventional motor output alongside instantaneous high explosive output. The CMHRA features a compact and lightweight purely mechanized decoupled transmission for two driving modes by using unidirectional bearings in conjunction with gears. The controllable high explosive output is realized by generating and igniting explosive gases (acetylene and oxygen) within integrated internal chambers through chemical reactions between calcium carbide, sodium peroxide, and water, thereby eliminating the need for complex and bulky external fuel supply equipment. Experimental results show that the CMHRA can switch rapidly and seamlessly between stable motor output and high-power explosive output. Practical load-driving experiments demonstrate that the CMHRA can offer instantaneous high explosive output with a maximum speed boost multiplier of about 85 times from different motor output speeds.
- 31 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (1) , 336-347
Design and Experiment of a Chemo-Mechatronic Hybrid Robotic Actuator With Explosive Driving Capability
The robotic actuator has emerged as a pivotal component that dictates the mobility and application scope of various robots. Currently, the robotic actuator faces significant challenges in power density, making it difficult to meet the demand for instantaneous high-power output underweight and volume limits. In response to this challenge, this article proposes a chemo-mechatronic hybrid robotic actuator with explosive driving capability (CMHRA), aiming to achieve a bimodal actuator capable of delivering high-precision conventional motor output alongside instantaneous high explosive output. The CMHRA features a compact and lightweight purely mechanized decoupled transmission for two driving modes by using unidirectional bearings in conjunction with gears. The controllable high explosive output is realized by generating and igniting explosive gases (acetylene and oxygen) within integrated internal chambers through chemical reactions between calcium carbide, sodium peroxide, and water, thereby eliminating the need for complex and bulky external fuel supply equipment. Experimental results show that the CMHRA can switch rapidly and seamlessly between stable motor output and high-power explosive output. Practical load-driving experiments demonstrate that the CMHRA can offer instantaneous high explosive output with a maximum speed boost multiplier of about 85 times from different motor output speeds.
- 26 July 2025
- Published by Taylor & Francis in International Journal of Systems Science
- Vol. 57 (6) , 1586-1602
Disturbance estimation and compensation controller based on cascade sliding mode observer containing multi-nonlinear-discontinuous functions
- 26 July 2025
- Published by Taylor & Francis in International Journal of Systems Science
- Vol. 57 (6) , 1586-1602
Disturbance estimation and compensation controller based on cascade sliding mode observer containing multi-nonlinear-discontinuous functions
- 11 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 33 (6) , 2178-2193
Robot Navigation in Dynamic and Crowded Environments
Mobile robots are increasingly implemented in various scenarios. However, navigating in crowded environments with moving obstacles and uncertain intentions poses significant challenges for robots. To address this challenge, we propose a novel social-based planning framework, which integrates behavior planning and motion planning to generate safe and efficient paths for robot navigation. In the behavior planning part, we first design an efficient method based on the graph to construct frozen areas to increase safety. Then, we build the cost function and propose the social behavior sampling strategy to adaptively generate behavior paths for dynamic environments. Next, we design the backward optimization algorithm that can directly optimize behavior paths in the continuous space efficiently. In the motion planning part, we develop the forward reachable set (FRS)-based algorithm to sample paths that can satisfy kinematic constraints. Furthermore, we design a collision-risk evaluation method to determine the optimal motion path by considering the interactions. Experiments and comparison studies verify the advantages of the proposed path-planning method in terms of average moving speed and collision risk.
- 11 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 33 (6) , 2178-2193
Robot Navigation in Dynamic and Crowded Environments
Mobile robots are increasingly implemented in various scenarios. However, navigating in crowded environments with moving obstacles and uncertain intentions poses significant challenges for robots. To address this challenge, we propose a novel social-based planning framework, which integrates behavior planning and motion planning to generate safe and efficient paths for robot navigation. In the behavior planning part, we first design an efficient method based on the graph to construct frozen areas to increase safety. Then, we build the cost function and propose the social behavior sampling strategy to adaptively generate behavior paths for dynamic environments. Next, we design the backward optimization algorithm that can directly optimize behavior paths in the continuous space efficiently. In the motion planning part, we develop the forward reachable set (FRS)-based algorithm to sample paths that can satisfy kinematic constraints. Furthermore, we design a collision-risk evaluation method to determine the optimal motion path by considering the interactions. Experiments and comparison studies verify the advantages of the proposed path-planning method in terms of average moving speed and collision risk.
- 2 April 2025
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 190
Hierarchical residual reinforcement learning based path tracking control method for unmanned bicycle
- 2 April 2025
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 190
Hierarchical residual reinforcement learning based path tracking control method for unmanned bicycle
- 11 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 69 (12) , 8946-8953
Robust Nonsingular Predefined-Time Terminal Sliding Mode Control for Perturbed Chains of Integrators
This paper provides a nonsingular predefined-time terminal sliding mode control scheme for perturbed chains of integrators. Based on the linear delayed feedback technique, a class of nonsingular smooth prescribed-time sliding surfaces with artificial time-delays is constructed, and the control scheme can achieve predefined-time control for perturbed chains of integrators with matched and mismatched disturbances. Especially, for double integrators, an initial-condition-based sufficient condition is provided to preserve the prescribed-time stability. Finally, several simulation results illustrate the performance of the proposed control scheme.
- 11 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 69 (12) , 8946-8953
Robust Nonsingular Predefined-Time Terminal Sliding Mode Control for Perturbed Chains of Integrators
This paper provides a nonsingular predefined-time terminal sliding mode control scheme for perturbed chains of integrators. Based on the linear delayed feedback technique, a class of nonsingular smooth prescribed-time sliding surfaces with artificial time-delays is constructed, and the control scheme can achieve predefined-time control for perturbed chains of integrators with matched and mismatched disturbances. Especially, for double integrators, an initial-condition-based sufficient condition is provided to preserve the prescribed-time stability. Finally, several simulation results illustrate the performance of the proposed control scheme.