Panut Mulyono
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Panut Mulyono has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Arief Budiman
Universitas Gadjah Mada
3 shared publications - Dyah Retno Sawitri
Department of Chemical Engineering, Faculty of Industrial Technology, Universitas Islam Indonesia, Jalan Kaliurang KM 14.5, Yogyakarta, Indonesia
3 shared publications - Andrey Ferriyan
Universitas Pembangunan Nasional Veteran Yogyakarta
2 shared publications - Heru Cahya Rustamaji
Universitas Pembangunan Nasional Veteran Yogyakarta
2 shared publications Rochmadi
Department of Chemical Engineering, Faculty of Engineering, Universitas Gadjah Mada, Jalan Grafika 2, Yogyakarta, Indonesia
2 shared publications- Afif Pamungkas
Department of Applied Chemistry, Faculty of Chemistry and Biochemistry, Kanagawa University, Yokohama 221-8686, Japan
1 shared publication
Latest Publications
- Open Access
- 15 August 2026
- Published by Elsevier in SSRN Electronic Journal
Upcycling Fly Ash into Mesoporous MCM-41/Chitosan Nanocomposite Hydrogels: A Smart Delivery System for Humic Acid-Driven Enhancement of Zea mays L
Degraded and post-mining soils require smart agrochemical delivery systems to mitigate nutrient leaching and poor water retention. This study introduces a sustainable, waste-valorized nanocomposite hydrogel engineered for the precision, controlled release of humic acid (HA). By reinforcing a multifunctional chitosan matrix with fly ash-derived MCM-41 silica nanoparticles via a surfactant-assisted sol–gel method, we developed a highly ordered mesoporous framework boasting an elevated surface area. Leveraging synergistic silanol-amino interactions, the optimized 5 wt% MCM-41 nanocomposite achieved a superior HA adsorption capacity of 338.46 mg/g and an ultra-high swelling ratio of 4483%, enabling sustained, diffusion-controlled release over 120 hours. Agronomic validation on maize (Zea mays L.) under deficit (50%) and full (100%) irrigation regimes demonstrated significant enhancements in biomass, chlorophyll synthesis, leaf development, and plant height. Ultimately, this waste-derived nanostructured hydrogel serves as an excellent, high-performance, climate-smart carrier capable of maximizing nutrient-use efficiency and driving resilient crop production in highly water-stressed, marginal agricultural environments.
- 15 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessUpcycling Fly Ash into Mesoporous MCM-41/Chitosan Nanocomposite Hydrogels: A Smart Delivery System for Humic Acid-Driven Enhancement of Zea mays L
Degraded and post-mining soils require smart agrochemical delivery systems to mitigate nutrient leaching and poor water retention. This study introduces a sustainable, waste-valorized nanocomposite hydrogel engineered for the precision, controlled release of humic acid (HA). By reinforcing a multifunctional chitosan matrix with fly ash-derived MCM-41 silica nanoparticles via a surfactant-assisted sol–gel method, we developed a highly ordered mesoporous framework boasting an elevated surface area. Leveraging synergistic silanol-amino interactions, the optimized 5 wt% MCM-41 nanocomposite achieved a superior HA adsorption capacity of 338.46 mg/g and an ultra-high swelling ratio of 4483%, enabling sustained, diffusion-controlled release over 120 hours. Agronomic validation on maize (Zea mays L.) under deficit (50%) and full (100%) irrigation regimes demonstrated significant enhancements in biomass, chlorophyll synthesis, leaf development, and plant height. Ultimately, this waste-derived nanostructured hydrogel serves as an excellent, high-performance, climate-smart carrier capable of maximizing nutrient-use efficiency and driving resilient crop production in highly water-stressed, marginal agricultural environments.
- Open Access
- 28 February 2026
- Published by Universitas Ahmad Dahlan in International Journal of Advances in Intelligent Informatics
- Vol. 12 (1) , 247-266
Non-destructive classification of sugarcane milling feasibility using deep learning: A comparative study of VGG19 and ResNet50
Assessing sugarcane quality is crucial for ensuring both economic value and processing efficiency in sugar production. Conventional approaches, such as refractometer-based Brix measurements, are destructive, labor-intensive, and unsuitable for large-scale or rapid field evaluations. This study proposes a non-destructive deep learning framework for classifying sugarcane internodes into two quality categories (< 16 °Bx and ≥16 °Bx) to address existing limitations. Two convolutional neural network architectures, VGG19 and ResNet50, were evaluated utilizing a defined transfer learning and data augmentation methodology. Because of its residual connections, which enable deeper and more stable feature learning, ResNet50 consistently outperformed VGG19, achieving the highest accuracy of 78.85% on the Luar2_Putih dataset. This comparative finding demonstrates that modern residual-based networks provide superior robustness for subtle visual classification tasks in agricultural imaging, while also validating the stability of the proposed two-phase training framework. The study advances AI-driven non-destructive quality assessment by offering a scalable, field-deployable solution that supports sustainable, efficient sugarcane processing in line with the UN Sustainable Development Goals (SDG 2, 9, and 12).
- 28 February 2026
- Published by Universitas Ahmad Dahlan in International Journal of Advances in Intelligent Informatics
- Vol. 12 (1) , 247-266
Open AccessNon-destructive classification of sugarcane milling feasibility using deep learning: A comparative study of VGG19 and ResNet50
Assessing sugarcane quality is crucial for ensuring both economic value and processing efficiency in sugar production. Conventional approaches, such as refractometer-based Brix measurements, are destructive, labor-intensive, and unsuitable for large-scale or rapid field evaluations. This study proposes a non-destructive deep learning framework for classifying sugarcane internodes into two quality categories (< 16 °Bx and ≥16 °Bx) to address existing limitations. Two convolutional neural network architectures, VGG19 and ResNet50, were evaluated utilizing a defined transfer learning and data augmentation methodology. Because of its residual connections, which enable deeper and more stable feature learning, ResNet50 consistently outperformed VGG19, achieving the highest accuracy of 78.85% on the Luar2_Putih dataset. This comparative finding demonstrates that modern residual-based networks provide superior robustness for subtle visual classification tasks in agricultural imaging, while also validating the stability of the proposed two-phase training framework. The study advances AI-driven non-destructive quality assessment by offering a scalable, field-deployable solution that supports sustainable, efficient sugarcane processing in line with the UN Sustainable Development Goals (SDG 2, 9, and 12).
- 30 December 2025
- Published by Universitas Pembangunan Nasional Veteran Yogyakarta in OPSI
- Vol. 18 (2) , 448-462
Feature-based classification of sugarcane quality using the K-nearest neighbor algorithm
The rapid advancement of artificial intelligence has enabled practical, data-driven approaches to agricultural quality assessment. However, many existing methods rely on complex sensor systems that are costly and difficult to deploy in the field. This study proposes a lightweight and interpretable K-Nearest Neighbor (KNN) model for non-destructive evaluation of sugarcane milling feasibility using five easily measurable physical attributes: relative distance ratio, internode length, mean diameter, circumference, and weight per centimeter. Samples with Brix less than 16 are categorized as not feasible for milling, while Brix equal to or greater than 16 are classified as possible. A dataset of 1,889 Bululawang samples collected in Malang, East Java, Indonesia, was evaluated across twenty-two scenarios that varied the train-test split, normalization method, distance metric, and neighborhood size. The optimal configuration, consisting of an 80:20 split, Standard normalization, the Minkowski distance metric, and k=75, achieved an accuracy of 78%. The findings confirm that physical measurements can serve as effective predictors of sugarcane quality and support data-driven inspection and sustainable resource utilization in line with SDGs 2, 9, and 12.
- 30 December 2025
- Published by Universitas Pembangunan Nasional Veteran Yogyakarta in OPSI
- Vol. 18 (2) , 448-462
Feature-based classification of sugarcane quality using the K-nearest neighbor algorithm
The rapid advancement of artificial intelligence has enabled practical, data-driven approaches to agricultural quality assessment. However, many existing methods rely on complex sensor systems that are costly and difficult to deploy in the field. This study proposes a lightweight and interpretable K-Nearest Neighbor (KNN) model for non-destructive evaluation of sugarcane milling feasibility using five easily measurable physical attributes: relative distance ratio, internode length, mean diameter, circumference, and weight per centimeter. Samples with Brix less than 16 are categorized as not feasible for milling, while Brix equal to or greater than 16 are classified as possible. A dataset of 1,889 Bululawang samples collected in Malang, East Java, Indonesia, was evaluated across twenty-two scenarios that varied the train-test split, normalization method, distance metric, and neighborhood size. The optimal configuration, consisting of an 80:20 split, Standard normalization, the Minkowski distance metric, and k=75, achieved an accuracy of 78%. The findings confirm that physical measurements can serve as effective predictors of sugarcane quality and support data-driven inspection and sustainable resource utilization in line with SDGs 2, 9, and 12.
- Open Access
- 31 July 2025
- Published by Universitas Gadjah Mada in Indonesian Journal of Chemistry
- Vol. 25 (4) , 1028-1037
Preliminary Study on Leaching Capacity of Rare Earth Elements from Coal Fly Ash by Using Citric Acid Solution
Rare earth elements (REEs) are chemical elements in the III B and lanthanide groups on the chemical periodic table. Extracting REEs from secondary resources (such as coal fly ash) could be environmentally friendlier than extracting REEs from primary resources. Coal fly ash was chosen because of its attractive REE availability and to minimize the pollution problem created by coal fly ash dumping. Citric acid is used as the leaching agent because of its biodegradability, relatively safe vis-à-vis mineral acid commonly used in the REE leaching, and its non-damaging nature to coal fly ash’s properties as construction material. The leaching experiment was conducted at temperature variations of 30, 50, and 85 °C, with liquid-solid ratio (L/S) of 5, 10, and 15 mL/g in 50 mL of 0.01 mol/L citric acid solution. The leaching experiments were conducted in a water bath shaker. It was found that increasing L/S and temperature mainly contributed to increasing cerium leaching capacity.
- 31 July 2025
- Published by Universitas Gadjah Mada in Indonesian Journal of Chemistry
- Vol. 25 (4) , 1028-1037
Open AccessPreliminary Study on Leaching Capacity of Rare Earth Elements from Coal Fly Ash by Using Citric Acid Solution
Rare earth elements (REEs) are chemical elements in the III B and lanthanide groups on the chemical periodic table. Extracting REEs from secondary resources (such as coal fly ash) could be environmentally friendlier than extracting REEs from primary resources. Coal fly ash was chosen because of its attractive REE availability and to minimize the pollution problem created by coal fly ash dumping. Citric acid is used as the leaching agent because of its biodegradability, relatively safe vis-à-vis mineral acid commonly used in the REE leaching, and its non-damaging nature to coal fly ash’s properties as construction material. The leaching experiment was conducted at temperature variations of 30, 50, and 85 °C, with liquid-solid ratio (L/S) of 5, 10, and 15 mL/g in 50 mL of 0.01 mol/L citric acid solution. The leaching experiments were conducted in a water bath shaker. It was found that increasing L/S and temperature mainly contributed to increasing cerium leaching capacity.
- Open Access
- 24 August 2023
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 18 (3) , 386-397
Self-Polymerization Reaction of Epoxidized Oleic Acid: Kinetic and Product Characterization
Epoxidized oleic acid can be transformed into vegetable oil-based polyesters through a self-polymerization reaction. This study aims to develop the kinetic model for the polymerization reaction between epoxide and carboxyl groups and the product characterization regarding its functional groups, molecular weight, and thermal stability. The polymerization reaction was carried out at the temperature of 120–180 °C for 2–6 h with the highest conversion of oxirane number up to 97%. Kinetic study showed one-step reaction model between oxirane and carboxylic group gives the activation energy value of 34.71 kJ/mol. Furthermore, the two simultaneous reaction model with further reaction between oxirane group and hydroxyl group also taken into account. The later provides a better agreement between the experimental data and the calculated conversion value. The activation energy values in the first and second steps are 38.61 and 26.00 kJ/mol, respectively. The product characterization showed that adding adipic acid did not significantly affect the polymer's molecular weight and thermal stability. The polydisperse characteristics of the poly(oleic acid) produced in this study enable poly(oleic acid) to be used as a lubricant, a polymer additive, or a precursor to produce polymers with higher molecular weights by taking advantage of the accessibility of OH groups. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
- 24 August 2023
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 18 (3) , 386-397
Open AccessSelf-Polymerization Reaction of Epoxidized Oleic Acid: Kinetic and Product Characterization
Epoxidized oleic acid can be transformed into vegetable oil-based polyesters through a self-polymerization reaction. This study aims to develop the kinetic model for the polymerization reaction between epoxide and carboxyl groups and the product characterization regarding its functional groups, molecular weight, and thermal stability. The polymerization reaction was carried out at the temperature of 120–180 °C for 2–6 h with the highest conversion of oxirane number up to 97%. Kinetic study showed one-step reaction model between oxirane and carboxylic group gives the activation energy value of 34.71 kJ/mol. Furthermore, the two simultaneous reaction model with further reaction between oxirane group and hydroxyl group also taken into account. The later provides a better agreement between the experimental data and the calculated conversion value. The activation energy values in the first and second steps are 38.61 and 26.00 kJ/mol, respectively. The product characterization showed that adding adipic acid did not significantly affect the polymer's molecular weight and thermal stability. The polydisperse characteristics of the poly(oleic acid) produced in this study enable poly(oleic acid) to be used as a lubricant, a polymer additive, or a precursor to produce polymers with higher molecular weights by taking advantage of the accessibility of OH groups. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
- 28 September 2021
- Published by Penerbit UTM Press in Jurnal Teknologi (Sciences & Engineering)
- Vol. 83 (6) , 157-166
CHEMICAL EPOXIDATION OF OLEIC ACID TO PRODUCE AB TYPE MONOMER FOR FATTY-ACID-BASED POLYESTER SYNTHESIS
Epoxides from vegetable oils are currently gaining more attention to replace petroleum-based monomers for polymer synthesis. As one of unsaturated fatty acids derived from vegetable oil, Oleic acid can be converted into epoxidized oleic acid by chemical epoxidation. Epoxidized oleic acid is a bifunctional monomer that has the potential to be used as raw material for fatty-acid-based polyester synthesis. This paper proposes the Taguchi-based optimization technique for in-situ epoxidation of oleic acid. The combining factors affecting the maximum yield were also determined to obtain a higher quality of epoxidized oleic acid in a relatively short time. Epoxidized oleic acid was characterized and tested for degradation. The characterization result showed the possibility of the polymerization reaction, and the kinetic study showed that the rate of epoxide degradation at room temperature follows second order with a reaction rate constant of2.7235 gr.mmol-1.day-1.
- 28 September 2021
- Published by Penerbit UTM Press in Jurnal Teknologi (Sciences & Engineering)
- Vol. 83 (6) , 157-166
CHEMICAL EPOXIDATION OF OLEIC ACID TO PRODUCE AB TYPE MONOMER FOR FATTY-ACID-BASED POLYESTER SYNTHESIS
Epoxides from vegetable oils are currently gaining more attention to replace petroleum-based monomers for polymer synthesis. As one of unsaturated fatty acids derived from vegetable oil, Oleic acid can be converted into epoxidized oleic acid by chemical epoxidation. Epoxidized oleic acid is a bifunctional monomer that has the potential to be used as raw material for fatty-acid-based polyester synthesis. This paper proposes the Taguchi-based optimization technique for in-situ epoxidation of oleic acid. The combining factors affecting the maximum yield were also determined to obtain a higher quality of epoxidized oleic acid in a relatively short time. Epoxidized oleic acid was characterized and tested for degradation. The characterization result showed the possibility of the polymerization reaction, and the kinetic study showed that the rate of epoxide degradation at room temperature follows second order with a reaction rate constant of2.7235 gr.mmol-1.day-1.
- Open Access
- 1 January 2020
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 69 (10) , 1297-1305
Kinetic Investigation for in-situ Epoxidation of Unsaturated Fatty Acid Based on the Pseudo-steady-state-hypothesis (PSSH)
Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies
- 1 January 2020
- Published by Japan Oil Chemists' Society in Journal of Oleo Science
- Vol. 69 (10) , 1297-1305
Open AccessKinetic Investigation for in-situ Epoxidation of Unsaturated Fatty Acid Based on the Pseudo-steady-state-hypothesis (PSSH)
Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies