Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xuezhi Qin has a total of 94 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fast Droplet Shedding via Aerodynamic Ratchet on a Moving Surface

    by Xuezhi Qin, Ran Tao, Xiong Wang, Bingqiang Ji, Chenyang Wu, Yong Hu, Zuankai Wang, Jing Li

    The rapid detachment of liquid from engineered surfaces is significant to applications ranging from self-cleaning and energy harvesting to anti-icing. While droplet repellency on stationary surfaces has been extensively achieved through surface chemistry and micro/nanotexture, the impact dynamics of droplets on rapidly moving surfaces remains poorly understood. Here, we systematically investigated the interaction between droplets and a moving surface with a horizontal velocity up to 50 m/s, identifying two distinct bouncing regimes. At low surface velocities, droplets undergo asymmetric bouncing, leading to a modest contact time reduction of approximately 25%. Above a critical surface velocity, however, droplets detach in the pancake configuration, reducing the contact time by approximately 65%. This transition arises from the lubrication pressure generated by an entrained air layer between the droplet and the rapidly moving surface, which suppresses conventional retraction and promotes early lift-off. We develop a scaling law that predicts the critical velocity separating these two regimes, providing a quantitative framework for controlling droplet contact time on moving surfaces. These findings not only advance fundamental understanding of liquid–solid interactions on moving surfaces but also offer practical strategies for minimizing liquid–surface contact in high-speed systems, including ice prevention in aircraft engines and erosion mitigation in turbine blades.

  • A hybrid flowing water-based energy generator inspired by a rotatable waterwheel

    by Hongbo Wang, Hangchen Liu, Yuxin Song, Xuezhi Qin, Yang Li, Kairui Tang, Huanxi Zheng, Wanghuai Xu, Zuankai Wang, Baoping Zhang

    A hybrid rotatable flowing water-based energy generator fully utilizes the spatial decoupling of the gravitational force of flowing water in two orthogonal directions and renders efficient water energy harvesting across a wide range of flow rates.


  • Open Access

    Role of chemistry in nature-inspired skin adhesives

    by Xiao Yang, Xiaonan Liu, Yeung Yeung Chau, Xuezhi Qin, Hong Zhu, Liang Peng, Kannie W. Y. Chan, Zuankai Wang

    This review examines nature-inspired skin adhesives that exhibit strong wet adhesion and high biocompatibility for next-generation wearable technologies, focusing on the chemical and physical mechanisms, design, and applications.


  • Open Access

    Ultrastrong, flexible thermogalvanic armor with a Carnot-relative efficiency over 8%

    by Jinpei Wang, Yuxin Song, Fanfei Yu, Yijun Zeng, Chenyang Wu, Xuezhi Qin, Liang Peng, Yitan Li, Yongsen Zhou, Ran Tao, et al.

    Body heat, a clean and ubiquitous energy source, is promising as a renewable resource to supply wearable electronics. Emerging tough thermogalvanic device could be a sustainable platform to convert body heat energy into electricity for powering wearable electronics if its Carnot-relative efficiency (ηr) reaches ~5%. However, maximizing both the ηr and mechanical strength of the device are mutually exclusive. Here, we develop a rational strategy to construct a flexible thermogalvanic armor (FTGA) with a ηr over 8% near room temperature, yet preserving mechanical robustness. The key to our design lies in simultaneously realizing the thermosensitive-crystallization and salting-out effect in the elaborately designed ion-transport highway to boost ηr and improve mechanical strength. The FTGA achieves an ultrahigh ηr of 8.53%, coupling with impressive mechanical toughness of 70.65 MJ m−3 and substantial elongation (~900%) together. Our strategy holds sustainable potential for harvesting body heat and powering wearable electronics without recharging.


  • Open Access

    Drinking-bird-enabled triboelectric hydrovoltaic generator

    by Hao Wu, Huanxi Zheng, Xuezhi Qin, Yuankai Jin, Yang Li, Siyan Yang, Zhiran Yi, Shouwei Gao, Steven Wang, Zuankai Wang


  • Open Access

    A droplet‐based electricity generator incorporating Kelvin water dropper with ultrahigh instantaneous power density

    by Yang Li, Xuezhi Qin, Yawei Feng, Yuxin Song, Zhiran Yi, Huanxi Zheng, Peiyang Zhou, Chenyang Wu, Siyan Yang, Lili Wang, et al.

    Harvesting renewable water energy in various formats such as raindrops, waves, and evaporation is one of the key strategies for achieving global carbon neutrality. The recent decade has witnessed rapid advancement of the droplet‐based electricity generator (DEG) with a continuous leap in the instantaneous output power density from 50 W/m2 to several kW/m2. Despite this, further pushing the upper limit of the output performance of DEG is still constrained by low surface charge density and long precharging time. Here, we report a DEG incorporating the Kelvin water dropper (K‐DEG) that can generate an ultrahigh instantaneous power density of 105 W/m2 upon one droplet impinging. In this design, the Kelvin water dropper continuously replenishes the high density of surface charges on DEG, while DEG fully releases these surface charges into electric output. K‐DEG with such a high output can directly light five 6‐W commercial lamps and even charge a cellphone by using falling droplets.


  • Honeybee comb-inspired stiffness gradient-amplified catapult for solid particle repellency

    by Wei Zhang, Wei Jiang, Chao Zhang, Xuezhi Qin, Huanxi Zheng, Wanghuai Xu, Miaomiao Cui, Bin Wang, Jianing Wu, Zuankai Wang

    Natural surfaces that repel foreign matter are ubiquitous and crucial for living organisms. Despite remarkable liquid repellency driven by surface energy in many organisms, repelling tiny solid particles from surfaces is rare. The main challenge lies in the unfavourable scaling of inertia versus adhesion in the microscale and the inability of solids to release surface energy. Here we report a previously unexplored solid repellency on a honeybee’s comb: a catapult-like effect to immediately eject pollen after grooming dirty antennae for self-cleaning. Nanoindentation tests revealed the 38-μm-long comb features a stiffness gradient spanning nearly two orders of magnitude from ~25 MPa at the tip to ~645 MPa at the base. This significantly augments the elastic energy storage and accelerates the subsequent conversion into kinetic energy. The reinforcement in energy storage and conversion allows the particle’s otherwise weak inertia to outweigh its adhesion, thereby suppressing the unfavourable scaling effect and realizing solid repellency that is impossible in conventional uniform designs. We capitalize on this to build an elastomeric bioinspired stiffness-gradient catapult and demonstrate its generality and practicality. Our findings advance the fundamental understanding of natural catapult phenomena with the potential to develop bioinspired stiffness-gradient materials, catapult-based actuators and robotic cleaners.


  • Self‐Adaptive Droplet Bouncing on a Dual Gradient Surface

    by Chenyang Wu, Xuezhi Qin, Huanxi Zheng, Zhenyu Xu, Yuxin Song, Yuankai Jin, Huanhuan Zhang, Jiaying Mo, Wanbo Li, Jian Lu, et al.

    Rapid detachment of impacting droplets from underlying substrate is highly preferred for mass, momentum, and energy exchange in many practical applications. Driven by this, the past several years have witnessed a surge in engineering macrotexture to reduce solid‐liquid contact time. Despite these advances, these strategies in reducing contact time necessitate the elegant control of either the spatial location for droplet contact or the range of impacting velocity. Here, this work circumvents these limitations by designing a dual gradient surface consisting of a vertical spacing gradient made of tapered pillar arrays and a lateral curvature gradient characterized as macroscopic convex. This design enables the impacting droplets to self‐adapt to asymmetric or pancake bouncing mode accordingly, which renders significant contact time reduction (up to ≈70%) for a broad range of impacting velocities (≈0.4–1.4 m s −1 ) irrespective of the spatial impacting location. This new design provides a new insight for designing liquid‐repellent surfaces, and offers opportunities for applications including dropwise condensation, energy conversion, and anti‐icing.


  • An integrated electricity generator harnessing water and solar energy featuring common-electrode configuration

    by Meizhen Liao, Wanghuai Xu, Yuxin Song, Zhenghua Pan, Huanxi Zheng, Yuchao Li, Xuezhi Qin, Lili Wang, Jian Lu, Zuankai Wang


  • Open Access

    Photothermal superhydrophobic copper nanowire assemblies: fabrication and deicing/defrosting applications

    by Siyan Yang, Qixun Li, Bingang Du, Yushan Ying, Yijun Zeng, Yuankai Jin, Xuezhi Qin, Shouwei Gao, Steven Wang, Zuankai Wang, et al.

    Ice and frost buildup continuously pose significant challenges to multiple fields. As a promising de-icing/defrosting alternative, designing photothermal coatings that leverage on the abundant sunlight source on the earth to facilitate ice/frost melting has attracted tremendous attention recently. However, previous designs suffered from either localized surface heating owing to the limited thermal conductivity or unsatisfied meltwater removal rate due to strong water/substrate interaction. Herein, we developed a facile approach to fabricate surfaces that combine photothermal, heat-conducting, and superhydrophobic properties into one to achieve efficient de-icing and defrosting. Featuring copper nanowire assemblies, such surfaces were fabricated via the simple template-assisted electrodeposition method, allowing us to tune the nanowire assembly geometry by adjusting the template dimensions and electrodeposition time. The highly ordered copper nanowire assemblies facilitated efficient sunlight absorption and lateral heat spreading, resulting in a fast overall temperature rise to enable the thawing of ice and frost. Further promoted by the excellent water repellency of the surface, the thawed ice and frost could be spontaneously and promptly removed. In this way, the all-in-one design enabled highly enhanced de-icing and defrosting performance compared to other nanostructured surfaces merely with superhydrophobicity, photothermal effect, or the combination of both. In particular, the defrosting efficiency could approach ∼100%, which was the highest compared to previous studies. Overall, our approach demonstrates a promising path toward designing highly effective artificial deicing/defrosting surfaces.