LSLalit Kumar Singh

Lalit Kumar Singh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Lalit Kumar Singh has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Sensor Fault Detection and Diagnostics in Small Modular Reactor and Advanced Analytical Perspectives: A Review

    by Neha Rani Yadav, Koninika Biswas, Prakash K. Tamboli, Lalit Kumar Singh, Siddhartha P. Duttagupta

  • A Dual‐Strategy Framework for Ship Course‐Keeping: Multi‐Constraint All Stability Region Synthesis With ASR‐Constrained Q‐Learning Control

    by Akanksha Dwivedi, Aditya Karan, Ahmad Ali, Lalit Singh

    Navigating marine vessels along precise trajectories remains a formidable control challenge due to high‐order inertia, nonlinear actuator constraints, and stochastic environmental disturbances. This work presents a robust dual‐strategy framework for ship course‐keeping by integrating classical frequency‐domain design with reinforcement learning. The proposed approach consists of two methods: (i) a multi‐constraint all‐stability region (ASR)‐based controller design and (ii) an ASR‐guided Q‐learning control architecture. By using the stability boundary locus approach, the ASR is constructed in the ‐plane. In addition, control‐effort constraints are directly incorporated into the ASR framework to ensure the rudder angle remains within permissible operating limits. Controller gains are selected from the feasible intersection region formed by the imposed design constraints. These analytically derived gains are then used to initialize the Q‐learning agent, enabling the learning process to begin from a stable and constraint‐satisfying operating condition. The proposed hybrid framework utilizes a reward‐based adaptive mechanism to enhance transient and steady‐state tracking while maintaining smooth and bounded control action. Stability, robustness, and rudder saturation constraints are embedded within the controller design space, ensuring that the learning process remains confined to feasible and analytically stable solutions. As a result, the proposed approach improves tracking performance without imposing excessive control effort or actuator burden. Comparative analysis with recently reported control strategies demonstrates that the proposed approach offers substantial improvements in closed‐loop performance, as evidenced by the results presented. For normal sea states, ASR and Q‐ASR controllers achieve reductions in settling time by , , and , compared to nonlinear decoration and switching feedback methods, respectively. The proposed controller efficacy was verified on a 189‐meter Yupeng vessel via real‐time controller hardware‐in‐the‐loop (C‐HIL) experiments using the C2000 Delfino F28379D platform. The proposed framework derives optimal control policies in simulation that can be efficiently implemented on standard embedded platforms. Resulting controllers offer a practical solution for autonomous ship autopilots while improving fuel economy and reducing actuator wear during maritime operations.

  • Design Improvisation for Sensor-Based Safety-Critical Instrumentation Systems

    by Pooja Singh, Lalit Kumar Singh

    Failure of safety critical instrumentation systems (SCIS) may lead to catastrophic disasters, even loss of human life, and hence such systems are designed with assurance of high dependability requirements. However, very little emphasis is given to ensure the safety requirements during the design phase. This paper presents an approach for model based design verification of such systems. The method can be used to ensure the safety of the system during the design phase itself. It involves stochastic modeling of the system, state space identification, analysis of states to identify risk states, and mitigation of risk states. The complete methodology is demonstrated on a case study of Nuclear Power Plant (NPP) system. So far, the method has been validated on 18 NPP systems.

  • Fault Detection of Neutron Flux Sensors for Instrumentation and Control Systems of Nuclear Power Plants

    by Neha Rani Yadav, Suryakant Gautam, Prakash K. Tamboli, Lalit Kumar Singh, Siddhartha P. Duttagupta

    This article presents a robust and efficient algorithm for real-time fault detection (FD) of neutron flux detectors, a critical component in instrumentation and control (I&C) systems of nuclear power plants (NPPs). The proposed methodology addresses the challenge of sensitive FD index generation for nonlinear Gaussian systems by leveraging an enhanced sequential Monte Carlo (SMC) variant. These detection indices are processed using a novel statistical divergence measure, the gradient-based Kullback–Leibler divergence (GKLD). To enhance robustness and sensitivity to incipient faults in the presence of high noise levels, the GKLD output is integrated with an exponentially weighted moving average (EWMA) framework. A comprehensive sensitivity analysis is conducted to evaluate key tuning parameters impact, such as the EWMA smoothing factor ( $\alpha $ ) and threshold multiplier (h), on the probability of missed detection (PMD) and probability of false alarm (PFA). The results, including an ablation study quantifying the contribution of individual components and extended Kalman filter correction-based particle filter (EKF-PF, GKLD, and EWMA) to overall performance, confirm the robustness and effectiveness of the proposed FD method. The findings also highlight the method’s ability to handle varying fault-to-noise ratios (FNRs) and demonstrate its applicability to real-time reactor FD systems. To validate the effectiveness of the proposed framework, pressurized heavy water reactor (PHWR) neutron flux variations driven by reactivity changes are modeled using point kinetic equations (PKEs), which accurately represent reactor dynamics for realistic conditions and measured by neutron flux detectors, distributed across the reactor core to provide critical real-time information about core status.


  • A Reliable People Tracking in Nuclear Power Plant Control Room Monitoring System Using Particle Filter

    by Mrityunjay Chaubey, Lalit Kumar Singh, Manjari Gupta, Pooja Singh

    The control room functions as the core nervous system of a nuclear power plant (NPP), emphasizing the crucial need for real-time monitoring of all activities inside to guarantee comprehensive safety. The maintenance of a high level of reliability in the real-time monitoring system within the control room of an NPP is of utmost importance in order to effectively mitigate any potential failures that may occur during the monitoring process. The software and hardware problems can both cause unplanned outages in a large-scale distributed monitoring system. To address the challenge of NPP control room monitoring, a particle filtering-based people tracking system for NPP control room monitoring is introduced to ensure the safety, security, and reliability of the NPP control room. In addition to tracking people for the monitoring of the NPP control room, the suggested technique also provides a reliability study of the large-distributed monitoring system.


  • Reliability and Performance Evaluation of Safety-Critical Instrumentation and Control Systems of Nuclear Power Plant

    by Nand Kumar Jyotish, Lalit Kumar Singh, Chiranjeev Kumar, Pooja Singh

    Instrumentation and control systems are nervous systems of nuclear power plant (NPP). These systems interact with several safety-critical components of the NPP, such as actuators, transformers, control valves, sensors, circuit breakers, signal processing units, controllers, and heat exchangers. Therefore, the failure of these systems could result in significant financial loss, harm to human resources, or environmental damage. As a result, these systems need to be highly reliable and accurate. In this article, we suggest a framework, based on the batch deterministic and stochastic Petri nets (BDSPNs) to measure the reliability and performance of safety-critical system. The framework consists of three phases. In the first phase, the system is modeled using the BDSPN to derive the transition rate among the system states. In phase 2, the transition rate matrix is utilized to compute the steady-state probability values, which help to evaluate the response time of the system using Little's law. The third phase uses a transition probability matrix to assess the reliability of the system. The technique is illustrated on shutdown system of NPP and is validated on the operational profile data. The obtained accuracy of 99.9905% in measurement of reliability validates the approach.


  • An Effective Approach to Teach Instrumentation and Control Systems for Engineering Students

    by Pooja Singh, Lalit Kumar Singh

    Contribution: This article presents an Instrumentation and Control (I&C) prototype for engineering postgraduate laboratory program designed to fulfill the quality objectives of the institution. Background: The syllabus and teaching methodology for engineering students have been periodically updated by universities and higher education institutes to meet the demand of industries and accreditation. I&C systems are widely used in several industries. This article seeks to further understand ways that a multidisciplinary approach for teaching in an undergraduate and postgraduate course related to I&C Systems can earn a systematic knowledge to meet industrial demands and accreditation. Intended Outcomes: A lab environment that motivates postgraduate students to create their fundamental concepts of I&C systems engineering, so that they can apply them in real applications. The intended outcomes are: teach multidisciplinary aspects of the subject, to enrich the students’ learning process and understanding, in designing robust I&C systems, and meet the criteria laid by ABET. Application Design: Many practical exercises were formulated to teach different aspects of I&C systems engineering. It incorporates multidisciplinary knowledge as required. An I&C systems engineering course taught at the department of Systems and Control at Indian Institute of Technology, is presented as a case study in which the evaluation process was based on institute criteria and the corresponding student outcomes. A student survey was also conducted to know the effectiveness of the teaching approach. Findings: The impact analysis of the proposed method was carried out with respect to the understanding of the students on the designing of I&C systems. An analysis of student’s $T$ -test before and after introducing prototype in the course shows the effectiveness of the approach.


  • Reliability and Performance Measurement of Safety-Critical Systems Based on Petri Nets: A Case Study of Nuclear Power Plant

    by Nand Kumar Jyotish, Lalit Kumar Singh, Chiranjeev Kumar, Pooja Singh

    Safety-critical systems (SCSs) mitigate the risk of catastrophic loss of assets and hence do have high dependability targets. Performance and reliability are the critical dependability attributes, particularly in control and safety systems, and hence essential to measure to ensure the dependability. Traditional methods either are not capable to capture the system dynamics or encounter state explosion problem. Also, the methods are not able to measure all critical performance attributes. This article proposes a novel approach to measure the performance and reliability of SCSs. Such systems contain multiple interconnecting processing nodes, the functional requirements of which are modeled using Petri net (PN). A set of ordinary differential equations (ODEs) is derived from the PN model that represents the state of the system. The ODE solution can be used to measure the critical performance attributes, such as latency time and throughput of the system. The proposed method can avoid the state explosion problem and also introduces new metrics of performance, along with their measurement: deadlock, liveness, stability, boundedness, and steady state. The proposed technique is applied to a case study of nuclear power plant. We obtained 99.887% and 99.939% accuracy of performance and reliability measurement, respectively, which proves the effectiveness of our approach.


  • Reliability Measurement of Control and Instrumentation Systems of Nuclear Power Plants

    by Pooja Singh, Lalit Kumar Singh

    Control and instrumentation (C&I) systems are used to measure the critical parameters to take decisions and, hence, such systems do have high reliability target. Therefore, it is essential to measure the reliability of such systems with high accuracy. Petri net (PN) is a mathematical tool that can model the stochastic behavior of the systems. The research work is devoted to propose a framework to measure the reliability of these systems using PN. The proposed framework contains three phases: 1) state-space identification, 2) probability of a system being in each state, and 3) reliability measurement. The proposed approach has been applied to 21 C&I systems of nuclear power plant (NPP) and is demonstrated on a case study of NPP to prove its effectiveness.