Jiří Šišma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiří Šišma has a total of 151 co-authors. Here are the top co-authors by number of shared publications:
- Roberto Versaci
ELI Beamlines facility, The Extreme Light Infrastructure ERIC, 252 41 Dolní Břežany, Czech Republic
5 shared publications - Gabriele Maria Grittani
The Extreme Light Infrastructure ERIC
4 shared publications - Sergei Vladimirovich Bulanov
The Extreme Light Infrastructure ERIC
4 shared publications - Ari J. Sloss
Institute for Research in Electronics and Applied Physics, University of Maryland, College Park, MD 20742, USA
3 shared publications Bo Miao
University of Maryland
3 shared publications- Howard M. Milchberg
Institute for Research in Electronics and Applied Physics, University of Maryland, College Park, MD 20742, USA
3 shared publications
Latest Publications
- Open Access
- 3 November 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- p. 1-24
Laser-Driven Multi-GeV Muon Sources: Production and Applications
- 3 November 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- p. 1-24
Open AccessLaser-Driven Multi-GeV Muon Sources: Production and Applications
- Open Access
- 8 October 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (19) , 9946
RPC Telescope Tests for Muon Detection at Laser-Plasma Accelerators
We report on a feasibility study conducted at the ELBA station at the ELI Beamlines facility to investigate the possible production of muons from high-energy electron beams generated by extended laser–plasma interactions in optically generated plasma waveguides. Our team operated a portable, autonomous, and compact telescope based on Resistive Plate Chamber (RPC) detectors, positioned to detect high-penetration charged particles originating from the beam dump. The campaign demonstrated the stable operation of the RPC telescope in the challenging radiation and electromagnetic environment of ELBA. The collected datasets, though statistically limited and acquired during parasitic operation of the accelerator, allow detailed characterization of the background and validated the detectors’ stability and tracking performance. These results confirm the feasibility of the approach and provide the foundation for a dedicated future run under optimized beam conditions, where muon detection sensitivity will be substantially improved.
- 8 October 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (19) , 9946
Open AccessRPC Telescope Tests for Muon Detection at Laser-Plasma Accelerators
We report on a feasibility study conducted at the ELBA station at the ELI Beamlines facility to investigate the possible production of muons from high-energy electron beams generated by extended laser–plasma interactions in optically generated plasma waveguides. Our team operated a portable, autonomous, and compact telescope based on Resistive Plate Chamber (RPC) detectors, positioned to detect high-penetration charged particles originating from the beam dump. The campaign demonstrated the stable operation of the RPC telescope in the challenging radiation and electromagnetic environment of ELBA. The collected datasets, though statistically limited and acquired during parasitic operation of the accelerator, allow detailed characterization of the background and validated the detectors’ stability and tracking performance. These results confirm the feasibility of the approach and provide the foundation for a dedicated future run under optimized beam conditions, where muon detection sensitivity will be substantially improved.
- Open Access
- 12 May 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 14, 1-15
High-repetition-rate, all-reflective optical guiding and electron acceleration in helium using an off-axis axicon
We present recent results on high-power guiding and laser wakefield acceleration in the ELectron Beam Accelerator (ELBA) beamline at ELI Beamlines, using the L3-HAPLS laser system (13 J, 30 fs, 0.2 Hz). By employing self-waveguiding in a 20 cm plasma channel in helium, we achieved stable acceleration of electron beams to energies of approximately 5 GeV. A novel all-reflective optical setup, including an off-axis reflective axicon, enabled efficient acceleration at 0.2 Hz and guiding at repetition rates up to 3.3 Hz. This compact single laser, single-compressor implementation of plasma channels for electron acceleration stabilizes electron pointing and enhances energy gain without requiring modifications to the laser system, paving the way for broader adoption of the technology across user facilities.
- 12 May 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 14, 1-15
Open AccessHigh-repetition-rate, all-reflective optical guiding and electron acceleration in helium using an off-axis axicon
We present recent results on high-power guiding and laser wakefield acceleration in the ELectron Beam Accelerator (ELBA) beamline at ELI Beamlines, using the L3-HAPLS laser system (13 J, 30 fs, 0.2 Hz). By employing self-waveguiding in a 20 cm plasma channel in helium, we achieved stable acceleration of electron beams to energies of approximately 5 GeV. A novel all-reflective optical setup, including an off-axis reflective axicon, enabled efficient acceleration at 0.2 Hz and guiding at repetition rates up to 3.3 Hz. This compact single laser, single-compressor implementation of plasma channels for electron acceleration stabilizes electron pointing and enhances energy gain without requiring modifications to the laser system, paving the way for broader adoption of the technology across user facilities.
- Open Access
- 11 May 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- p. 1-10
Supersonic gas jet catcher system for differential pumping in laser plasma interaction experiments
- 11 May 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- p. 1-10
Open AccessSupersonic gas jet catcher system for differential pumping in laser plasma interaction experiments
- Open Access
High-repetition-rate, all-reflective optical guiding and electron acceleration in helium using an off-axis axicon
We present recent results on high-power guiding and laser wakefield acceleration (LWFA) in the ELBA beamline at ELI Beamlines, using the L3-HAPLS laser system (13 J, 30 fs, 0.2 Hz). By employing self-waveguiding in a 20 cm plasma channel in helium, we achieved stable acceleration of electron beams to energies approaching 5 GeV. A novel all-reflective optical setup, including an off-axis reflective axicon, enabled efficient acceleration at 0.2 Hz and guiding at repetition rates up to 3.3 Hz. This compact single laser, single compressor implementation of plasma channels for electron acceleration stabilizes electron pointing and enhances energy gain without requiring modifications to the laser system, paving the way for broader adoption of the technology across user facilities.
Open AccessHigh-repetition-rate, all-reflective optical guiding and electron acceleration in helium using an off-axis axicon
We present recent results on high-power guiding and laser wakefield acceleration (LWFA) in the ELBA beamline at ELI Beamlines, using the L3-HAPLS laser system (13 J, 30 fs, 0.2 Hz). By employing self-waveguiding in a 20 cm plasma channel in helium, we achieved stable acceleration of electron beams to energies approaching 5 GeV. A novel all-reflective optical setup, including an off-axis reflective axicon, enabled efficient acceleration at 0.2 Hz and guiding at repetition rates up to 3.3 Hz. This compact single laser, single compressor implementation of plasma channels for electron acceleration stabilizes electron pointing and enhances energy gain without requiring modifications to the laser system, paving the way for broader adoption of the technology across user facilities.
- Top Cited PapersOpen Access
- 1 May 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (5)
Development of a high charge 10 GeV laser electron accelerator
Low-density meter-scale plasma waveguides produced in meter-scale supersonic gas jets have paved the way for recent demonstrations of all-optical multi-gigaelectronvolt laser wakefield acceleration (LWFA). This paper reviews recent advances by the University of Maryland, which have enabled these results, focusing on the development of elongated supersonic gas jets up to ∼1 m in length, experimental and simulation studies of plasma waveguide formation, and a new three-stage model for relativistic pulse propagation dynamics in these waveguides. We also present results from recent LWFA experiments conducted at the Laboratory for Advanced Lasers and Extreme Photonics at Colorado State University demonstrating high charge, low divergence electron bunches to ∼10 GeV, with laser-to-electron beam efficiency of at least ∼30%.
- 1 May 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (5)
Top Cited PapersOpen AccessDevelopment of a high charge 10 GeV laser electron accelerator
Low-density meter-scale plasma waveguides produced in meter-scale supersonic gas jets have paved the way for recent demonstrations of all-optical multi-gigaelectronvolt laser wakefield acceleration (LWFA). This paper reviews recent advances by the University of Maryland, which have enabled these results, focusing on the development of elongated supersonic gas jets up to ∼1 m in length, experimental and simulation studies of plasma waveguide formation, and a new three-stage model for relativistic pulse propagation dynamics in these waveguides. We also present results from recent LWFA experiments conducted at the Laboratory for Advanced Lasers and Extreme Photonics at Colorado State University demonstrating high charge, low divergence electron bunches to ∼10 GeV, with laser-to-electron beam efficiency of at least ∼30%.
- Open Access
- 29 April 2025
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
- Vol. 1077
High charge laser acceleration of electrons to 10 GeV
- 29 April 2025
- Published by Elsevier in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
- Vol. 1077
Open AccessHigh charge laser acceleration of electrons to 10 GeV
- Open Access
- 1 February 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (2)
Pulsed discharge in a large diameter tube with long-lasting pre-ionization
The evolution of a nitrogen plasma discharge in a tube with an inner diameter of 9.2 mm, excited by a particular pulse shape, is studied to suppress ablation from the inner wall. Excitation is realized by two current pulses. The first one is a long pre-ionization pulse, which guarantees the stability of the plasma column, and the second one is a higher current pulse, which causes the detachment of the discharge plasma from the wall. The evolution of plasma in the tube is modeled using the magneto-hydrodynamic code NPINCH in two approximations: (1) non-ablative and (2) strongly ablative walls. The time dependences of the optical radiation power in the direction along the discharge tube axis are measured and compared with simulated experimental results in non-ablative and ablative approaches. Time dependence of the measured optical radiation emission corresponds to the non-ablative model. In the selected large diameter capillary, the development of the pinching plasma is not significantly affected by the ablation of the material from the capillary walls.
- 1 February 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (2)
Open AccessPulsed discharge in a large diameter tube with long-lasting pre-ionization
The evolution of a nitrogen plasma discharge in a tube with an inner diameter of 9.2 mm, excited by a particular pulse shape, is studied to suppress ablation from the inner wall. Excitation is realized by two current pulses. The first one is a long pre-ionization pulse, which guarantees the stability of the plasma column, and the second one is a higher current pulse, which causes the detachment of the discharge plasma from the wall. The evolution of plasma in the tube is modeled using the magneto-hydrodynamic code NPINCH in two approximations: (1) non-ablative and (2) strongly ablative walls. The time dependences of the optical radiation power in the direction along the discharge tube axis are measured and compared with simulated experimental results in non-ablative and ablative approaches. Time dependence of the measured optical radiation emission corresponds to the non-ablative model. In the selected large diameter capillary, the development of the pinching plasma is not significantly affected by the ablation of the material from the capillary walls.
- Open Access
Characterization of kHz Repetition Rate Laser-Driven Electron Beams by an Inhomogeneous Field Dipole Magnet Spectrometer
We demonstrate a method to characterize the beam energy, transverse profile, charge, and dose of a pulsed electron beam generated by a 1 kHz TW laser-plasma accelerator. The method is based on imaging with a scintillating screen in an inhomogeneous, orthogonal magnetic field produced by a wide-gap magnetic dipole. Numerical simulations were developed to reconstruct the electron beam parameters accurately. The method has been experimentally verified and calibrated using a medical LINAC. The energy measurement accuracy in the 6–20 MeV range is proven to be better than 10%. The radiation dose has been calibrated by a water-equivalent phantom, RW3, showing a linear response of the method within 2% in the 0.05–0.5 mGy/pulse range.
Open AccessCharacterization of kHz Repetition Rate Laser-Driven Electron Beams by an Inhomogeneous Field Dipole Magnet Spectrometer
We demonstrate a method to characterize the beam energy, transverse profile, charge, and dose of a pulsed electron beam generated by a 1 kHz TW laser-plasma accelerator. The method is based on imaging with a scintillating screen in an inhomogeneous, orthogonal magnetic field produced by a wide-gap magnetic dipole. Numerical simulations were developed to reconstruct the electron beam parameters accurately. The method has been experimentally verified and calibrated using a medical LINAC. The energy measurement accuracy in the 6–20 MeV range is proven to be better than 10%. The radiation dose has been calibrated by a water-equivalent phantom, RW3, showing a linear response of the method within 2% in the 0.05–0.5 mGy/pulse range.
- Open Access
- 1 November 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (21) , 10253
A Study of Current Controlled Discharge in a Nitrogen Filled Tube
Time dependencies of the electrical resistance and electron density evolution in the discharge in a tube, with nitrogen at different pressures, with a diameter of and a length of were studied. A current pulse with an amplitude of and duration of has created the discharge in the tube. Instantaneous electron densities are estimated from the interference pattern in Mach–Zehnder interferometer using femtosecond Ti: sapphire laser beam. Laboratory results are compared with results of computer modelling by MHD computer codes NPINCH and ZSTAR. Time development of the discharge resistance according to experiment is measured and evaluated. Minimum measurable value of the electron density in the experiment is determined as .- 1 November 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (21) , 10253
Open AccessA Study of Current Controlled Discharge in a Nitrogen Filled Tube
Time dependencies of the electrical resistance and electron density evolution in the discharge in a tube, with nitrogen at different pressures, with a diameter of and a length of were studied. A current pulse with an amplitude of and duration of has created the discharge in the tube. Instantaneous electron densities are estimated from the interference pattern in Mach–Zehnder interferometer using femtosecond Ti: sapphire laser beam. Laboratory results are compared with results of computer modelling by MHD computer codes NPINCH and ZSTAR. Time development of the discharge resistance according to experiment is measured and evaluated. Minimum measurable value of the electron density in the experiment is determined as .