QWQinghe Wu

Qinghe Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qinghe Wu has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Characteristic Analysis, Simulation, and Experimental Comparison of Two Kinds of Circular Magnet Array in Energy Harvesting

    by Shengkai Guo, Shiqiao Gao, Lei Jin, Xueda Du, Qinghe Wu, Jie Shang

    The circular Halbach array is of great application value in electromagnetic energy conversion. The Halbach array can be formed with multiple magnets according to a specific method. The magnetic flux intensity of the magnet array is concentrated and enhanced in a certain area. The concentrated magnetic flux intensity could lead to a higher rate of change in the magnetic flux when the magnet and the coil move relatively. The spatial arrangement, structural dimensions, and residual flux density of the Halbach array are the main factors affecting its performance. Some areas with almost no magnetic induction in the Halbach array affect the performance of electromagnetic energy conversion. This paper conducted a comparative study of the Halbach array and the two-directional magnet array in terms of energy conversion. The root mean square (RMS) value and phase of the induced voltage in the coil were analyzed by a finite element method. Simulation shows that the RMS value of the induced voltage in the coil is equal when the gap is 1.55 mm and the REMEH adopts either of the two magnet arrays. The two-directional array has advantages in the energy harvesting performance when the gap is less than 1.55 mm, while the Halbach array has advantages in the energy harvesting performance when the gap is greater than 1.55 mm. The experimental verification of the designed prototype was implemented in this study. The experimental voltage is in good agreement with the simulation voltage. The threshold value of the gap in the experiment is about 2 mm, which is slightly higher than the simulation value. This characteristic has a certain reference value for the application of the Halbach array in the electromagnetic field.


  • Open Access

    A Tuning Fork Frequency Up-Conversion Energy Harvester

    by Qinghe Wu, Shiqiao Gao, Lei Jin, Xiyang Zhang, Zuozong Yin, Caifeng Wang

    In this paper, a novel tuning fork structure for self-frequency up-conversion is proposed. The structure has an in-phase vibration mode and an anti-phase vibration mode. The in-phase vibration mode is used to sense the environment vibration, and the anti-phase vibration mode is used for energy conversion and power generation. The low-frequency energy collection and the high-frequency energy conversion can be achieved simultaneously. Theoretical and experimental results show that the tuning fork frequency up-conversion energy harvester has excellent performance. This structure provides the energy harvester with excellent output power in a low-frequency vibration environment. At the resonant frequency of 7.3 Hz under 0.7 g acceleration, the peak voltage is 41.8 V and the peak power is 8.74 mW. The tuning fork frequency up-conversion energy harvester causes the humidity sensor to work stably. The structure has the potential to power wireless sensor nodes or to be used as a small portable vibration storage device, especially suitable for the monitoring of the environment related to human movement.