HKHaci İsMail Kesik

Haci İsMail Kesik

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Haci İsMail Kesik has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effects of UV Aging on Antimicrobial Performance and Color Stability of Hygienic Additive-Modified Polyurethane and Waterborne Coatings Applied to Oriental Beech (Fagus orientalis L.)

    by Hacı İsmail Kesik, Recep Aykan, Perihan Akbaş

    This study was carried out to investigate the antimicrobial performance and color stability of silver (Ag)-modified polyurethane and waterborne coating systems applied to Oriental beech (Fagus orientalis L.) wood after the specimens were subjected to UV aging for 24 h. Antimicrobial activity and color stability were evaluated before and after aging against Escherichia coli (E. coli, ATCC 25922), Staphylococcus aureus (S. aureus, NCTC 13552), and Candida albicans (C. albicans) in accordance with the JIS Z 2801 standard. Color changes were determined using CIELab parameters (ΔL*, Δa*, Δb*, and ΔE*) in accordance with the TS EN ISO 16474-3 standard. Prior to UV exposure, the highest antibacterial activity against E. coli occurred in Ag-modified waterborne varnish coatings, whereas the highest antifungal activity against C. albicans occurred in Ag-modified polyurethane paint systems. After UV aging, antimicrobial performance varied depending on the coating type. Particularly, Ag-modified waterborne varnish coatings retained significant antibacterial activity against E. coli and S. aureus and exhibited the highest antifungal performance against C. albicans. Color analysis revealed that UV exposure also caused significant changes in all coating systems. The most pronounced variations were observed for the lightness difference (ΔL*), red–green color difference (Δa*), and yellow–blue color difference (Δb*) parameters, while the lowest total color difference (ΔE*) values were observed for Ag-modified polyurethane and Ag-modified waterborne varnish coatings. Overall, Ag-modified waterborne varnish systems demonstrated superior performance in both antimicrobial activity and color stability after UV aging.

  • Ergonomic Evaluation of Furniture and Equipment Elements Used in Offices: Kastamonu University Example

    by Emel Tiftik, Haci İsMail Kesik

    This study conducted an ergonomic evaluation of some furniture and equipment used in workplaces, and identified health problems that users experienced. For this purpose, a data collection survey was administered to 173 academic and administrative staff at Kastamonu University, aged between 21 and 52, and the results were compared with literature and standards. The study concluded that some furniture and equipment used in workplaces were not ergonomic for employees, leading to health problems for users. The identified health problems included pain in the shoulders, neck, head, back, waist, and legs, with a higher prevalence of pain among female users than male users. Based on these results, it can be argued that ergonomic working conditions should be provided for Kastamonu University academic and administrative staff, which could reduce or eliminate pain complaints. Furthermore, training on ergonomic working conditions and appropriate exercises could contribute to a more productive academic and administrative staff. To this end, a total of 173 surveys were administered to office users, 86 administrative and 87 academic staff between the ages of 21 and 52. The survey results, determined using frequency analysis, were compared with literature and standards. The study found that some office furniture and fittings were not ergonomically designed for employees, leading to a higher incidence of pain in the shoulders, neck, head, back, waist, and legs among female users than male users. These results suggest that providing ergonomic working conditions for Kastamonu University's academic and administrative staff may reduce or eliminate pain complaints. Furthermore, ergonomics training may be beneficial, as it could contribute to the more productive work of academic and administrative staff.

  • Determination of Some Mechanical Properties of Kopalit Composite Board

    by Haci İsMail Kesik, Kubulay Çağatay, Ramazan Bülbül

    Wood sawdust formed in different sizes during the mowing process, chipboard (YL), directed chipset (OSB) and so on. It is used in different proportions in the production of composite plates. Very high mechanical resistance is not expected in the plates where small wood shavings are produced alone. If these chips are pressed at high pressure and temperature in the mold and their surfaces are covered with decor paper, new composite plates can be produced with high mechanical resistance properties.This study was conducted to determine the physical and mechanical properties needed in furniture engineering design of the new plates called Kopalit. For this purpose, the plates produced from the sawdust of different mixture rates and eastern beech (fagus orientalis L.) was used as examples of experimental examples. In the experiments, the density of composite plates, screw tensile strength, scratch resistance, bending resistance and elasticity module values in bending were determined according to the relevant standards and a systematic database was created for furniture designers.

  • Open Access

    Effect of Hygiene and Nano-Color Pigment Modification on Hardness, Glossiness, and Adhesion Strength of Some Surface Coating Materials

    by Recep Aykan, Hacı İsmail Kesik

    The aim of this study was to determine the effects of hygiene (H) and nano-color pigment (NCP) modifications on hardness, glossiness, and adhesion strength of some surface coating materials produced specifically for use in wooden toys. For this purpose, H- and NCP-modified polyurethane (PU) and waterborne (WBV) varnishes were applied to specimens prepared from Oriental beech (Fagus orientalis L.) and Oriental plane (Platanus orientalis L.) woods; Oriental beech, birch (Betula pendula), and poplar (Populus deltoides) plywood; and medium-density fiberboard (MDF). Then, hardness, glossiness, and adhesion values were determined. Results indicated that the highest values were obtained for hardness in PU and PU*NCP applied to MDF; for glossiness in WBV*H applied to birch plywood and MDF; and for adhesion strength in WBV and PU*H applied to beech. H and NCP modifications have significant effects on hardness, glossiness, and adhesion strength. As a result, it was determined that hardness and glossiness increased with H modification and decreased with NCP, especially glossiness. Furthermore, it was determined that H and NCP decreased the adhesion strength. Future studies comparing natural antibacterial effects of different wood species with various coating types will contribute to the development of products that are safe for children and sustainable.


  • Color change against the natural aging effect of water-based protective layers on some etched wood materials

    by D. Kemal Bayraktar, Haci İsmail Kesi̇k

    Ahşap yapıların ve yapı malzemelerinin dayanıklılığı ve hizmet süresi, yapı kalitesi ve ekonomisinde en önemli konulardan biridir ve yapılarda ahşap yapı elemanlarının rutubet almasını engelleyen iyi bir tasarım, yapıya uzun bir hizmet ömrü sağlayacaktır. Fakat bazı yapılarda ve kullanım yerlerinde alınacak tasarım önlemleri dahi ahşabın hizmet ömrünü etkilememekte ve bu malzeme, rutubet kaynaklı mantar çürümelerine ve böcek ataklarına, yanmaya maruz kalabilmektedir. Çalışmada sodyum bikarbonat (NaHCO3) ile aşındırma işlemi (1, 2 ve 3 Atü) gerçekleştirilerek (püskürtme işlemiyle) yüzey ondüleli hale getirilmiş ve akabinde ASTM D 1413-007 (2007) standardına göre çeşitli çözelti konsantrasyonlarında (% 5, 7 ve 9) emprenye işlemine tabi tutulmuştur. En yüksek retensiyon değeri ladin odununda % 7 konsantrasyon ve 3 ATÜ’de (% 32,46), en düşük retensiyon meşe odununda % 9 konsantrasyon ve 1 ATÜ’de (% 5,22) belirlenmiştir. Ahşap malzemenin ikincil bir işlemle korunmasına yönelik su bazlı boya/vernik sistemleriyle üst yüzey işlemleri yapılmıştır. 12 aylık periyotla doğal yaşlandırma yapılarak, ahşabın dış hava etkilerine maruz kaldığı şartlar altında renk değişim değerlerinden (L*) ışıklılık değer değişimi belirlenmiştir. L* ışıklılık değeri odun türüne göre en yüksek kestane odununda (44,34), aşındırma etkisine göre en yüksek L* kontrol örneğinde, emprenye faktörüne göre L* değeri % 9 sodyum bikarbonatta (43,59), vernik/boya faktörüne göre L* en yüksek su bazlı vernikte (54,25) olarak gerçekleşirken 0,05 önem düzeyinde tüm faktörler anlamlı bulunmuştur.