Ábel Markó
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ábel Markó has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Judit Mádl-Szőnyi
József and Erzsébet Tóth Endowed Hydrogeology Chair, Department of Geology, Institute of Geography and Earth Sciences, ELTE Eötvös Loránd University, Budapest 1117, Hungary
8 shared publications - Tamara Tóthi
ELTE Eötvös Loránd University Budapest
5 shared publications Imre Szilágyi
Ministry of Energy
4 shared publications- Daniele Pedretti
Dipartimento di Scienze della Terra “A. Desio”, Università degli Studi di Milano, Milan, Italy
3 shared publications Maren Brehme
Department of Earth Sciences, ETH Zürich, Geothermal Energy and Geofluids, Zurich, Switzerland
2 shared publicationsMárk Szijártó
2 shared publications
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Numerical analysis of pressure increase in injection wells within stochastically heterogeneous reservoirs
Geothermal conditions in the Pannonian Basin are among the most favorable in continental Europe, thus increasingly more geothermal projects are being launched in Hungary. However, reinjection is often burdened with practical problems, which can seriously decrease its efficiency, and endanger the entire geothermal project.While most research tends to concentrate on local scale biological-mechanical-chemical problems (e.g. pore-scale clogging), we argue that reservoir (regional) scale heterogeneity of siliciclastic aquifers can pose an equally important risk to reinjection well efficiency. Significant reservoir heterogeneity affects (i) the size of the effective reservoir volume, (ii) the degree of connectivity between zones of high permeability, and (iii) the communication between production and reinjection wells, as a consequence, it can influence the success of reinjection.Stochastic permeability distributions were generated using Sequential Gaussian (SGS) and Sequential Indicator Simulations (SIS) to represent the heterogeneity of a siliciclastic porous reservoir. The effect of lateral permeability heterogeneity was quantified on head increase in the injection well screened within the reservoir. The propagation of the front of the pressure increase is also monitored in the numerical simulations to make a comparison between the pressure evolution in homogeneous and heterogeneous reservoirs. The effect of the mean, variance and correlation length (i.e. heterogeneity scale) of the permeability distribution was investigated on the pressure increase and calculated using 2D transient numerical flow modelling with COMSOL Multiphysics finite element software package.Model results show a pressure increase of several bars over the lifetime of the injection well, depending on all three statistical parameters characterizing the permeability heterogeneity. When the well is placed into a high-permeability zone (common operational practice), anomalous pressure rise occurs when the pressure front reaches low-permeability rock. Therefore, the success of the reinjection could also depend on the permeability distribution of areas farther away from the well. The onset time of the head increase observed in the well depends on the actual permeability realization, but, in general, greatly exceeds the time period of a typical pumping test. Insufficient preliminary data and/or disregarding the macroscale hydrogeological variations can lead to relevant overestimations of the injection well capacity. On the other hand, understanding the influence of aquifer heterogeneity on reinjection efficiency can contribute to more proper positioning of reinjection wells and to more successful injection projects.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessNumerical analysis of pressure increase in injection wells within stochastically heterogeneous reservoirs
Geothermal conditions in the Pannonian Basin are among the most favorable in continental Europe, thus increasingly more geothermal projects are being launched in Hungary. However, reinjection is often burdened with practical problems, which can seriously decrease its efficiency, and endanger the entire geothermal project.While most research tends to concentrate on local scale biological-mechanical-chemical problems (e.g. pore-scale clogging), we argue that reservoir (regional) scale heterogeneity of siliciclastic aquifers can pose an equally important risk to reinjection well efficiency. Significant reservoir heterogeneity affects (i) the size of the effective reservoir volume, (ii) the degree of connectivity between zones of high permeability, and (iii) the communication between production and reinjection wells, as a consequence, it can influence the success of reinjection.Stochastic permeability distributions were generated using Sequential Gaussian (SGS) and Sequential Indicator Simulations (SIS) to represent the heterogeneity of a siliciclastic porous reservoir. The effect of lateral permeability heterogeneity was quantified on head increase in the injection well screened within the reservoir. The propagation of the front of the pressure increase is also monitored in the numerical simulations to make a comparison between the pressure evolution in homogeneous and heterogeneous reservoirs. The effect of the mean, variance and correlation length (i.e. heterogeneity scale) of the permeability distribution was investigated on the pressure increase and calculated using 2D transient numerical flow modelling with COMSOL Multiphysics finite element software package.Model results show a pressure increase of several bars over the lifetime of the injection well, depending on all three statistical parameters characterizing the permeability heterogeneity. When the well is placed into a high-permeability zone (common operational practice), anomalous pressure rise occurs when the pressure front reaches low-permeability rock. Therefore, the success of the reinjection could also depend on the permeability distribution of areas farther away from the well. The onset time of the head increase observed in the well depends on the actual permeability realization, but, in general, greatly exceeds the time period of a typical pumping test. Insufficient preliminary data and/or disregarding the macroscale hydrogeological variations can lead to relevant overestimations of the injection well capacity. On the other hand, understanding the influence of aquifer heterogeneity on reinjection efficiency can contribute to more proper positioning of reinjection wells and to more successful injection projects.
- 22 July 2025
- Published by Springer Nature
- p. 57-65
Geological Risk Analysis of Geothermal Developments—Case Study of the Hypogene Buda Thermal Karst
- 22 July 2025
- Published by Springer Nature
- p. 57-65
Geological Risk Analysis of Geothermal Developments—Case Study of the Hypogene Buda Thermal Karst
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
PHREI – A simplified Python based Graphical User Interface for PHREEQC to model to chemical clogging processes in reinjection wells
Chemical clogging is one of the main issues arising in geothermal systems hindering the efficient operation, especially the thermal water reinjection. Hydrogeochemical models are able to assess the risk of mineral precipitation and provide quantitative estimation of the degradation of hydraulic properties. A Python based simplified Graphical User Interface (named PHREI) was created with the abilities of a previously developed and published geochemical model setup. The Python source code of the GUI package can be found via the https://github.com/marabukok/PHREI page. This setup aims to reproduce the main geochemical processes of a geothermal loop from production until reinjection into the aquifer. The forming scale cumulated over time is then used to estimate the porosity and permeability degradation in the near-wellbore zone. PHREI is applicable without creating new hydrogeochemical model setups by entering the parameters in pop-up windows: fluid composition of production well and reservoir fluid, mineral composition of the reservoir, flow rate, initial porosity and dimensions of gravel pack or the near well-bore zone, reinjection and reservoir temperature. Outcome of the model provides first estimate of clogging risk in doublet systems, as an example a theoretical period of time in which porosity is decreased by half. PHREI was tested at a geothermal doublet system suffering from low injectivity and used for pre-screening of thermal wells and regions with respect to the clogging risk. This way results contribute to a mapping of clogging related risk in the geothermal reconnaissance phase. Hence it can be part of the analysis of reinjection related risk, and the “geothermal reinjection potential”. The first author was supported, and the research was financed through the KDP-2021 Cooperative Doctoral Programme of the Ministry of Culture and Innovation of Hungary from the source of the National Research, Development and Innovation Fund, grant number: KDP_2021_ELTE_C1789026. The study was funded by the National Multidisciplinary Laboratory for Climate Change, RRF-2.3.1-21- 2022-00014 project
- 18 March 2025
- Published by Copernicus GmbH
Open AccessPHREI – A simplified Python based Graphical User Interface for PHREEQC to model to chemical clogging processes in reinjection wells
Chemical clogging is one of the main issues arising in geothermal systems hindering the efficient operation, especially the thermal water reinjection. Hydrogeochemical models are able to assess the risk of mineral precipitation and provide quantitative estimation of the degradation of hydraulic properties. A Python based simplified Graphical User Interface (named PHREI) was created with the abilities of a previously developed and published geochemical model setup. The Python source code of the GUI package can be found via the https://github.com/marabukok/PHREI page. This setup aims to reproduce the main geochemical processes of a geothermal loop from production until reinjection into the aquifer. The forming scale cumulated over time is then used to estimate the porosity and permeability degradation in the near-wellbore zone. PHREI is applicable without creating new hydrogeochemical model setups by entering the parameters in pop-up windows: fluid composition of production well and reservoir fluid, mineral composition of the reservoir, flow rate, initial porosity and dimensions of gravel pack or the near well-bore zone, reinjection and reservoir temperature. Outcome of the model provides first estimate of clogging risk in doublet systems, as an example a theoretical period of time in which porosity is decreased by half. PHREI was tested at a geothermal doublet system suffering from low injectivity and used for pre-screening of thermal wells and regions with respect to the clogging risk. This way results contribute to a mapping of clogging related risk in the geothermal reconnaissance phase. Hence it can be part of the analysis of reinjection related risk, and the “geothermal reinjection potential”. The first author was supported, and the research was financed through the KDP-2021 Cooperative Doctoral Programme of the Ministry of Culture and Innovation of Hungary from the source of the National Research, Development and Innovation Fund, grant number: KDP_2021_ELTE_C1789026. The study was funded by the National Multidisciplinary Laboratory for Climate Change, RRF-2.3.1-21- 2022-00014 project
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Connections between Thermal Springs and Deep Geothermal Potential in the Buda Thermal Karst System
The Buda Thermal Karst is characterised by three geographically and geologically separated discharge areas along the Danube in the Buda Hills (Erőss et al, 2012 etc.). These contain lukewarm, lukewarm - warm and warm springs, respectively. This research aims to find an answer to the question of the separation and differences of these discharge areas and their significance in geothermal exploration under the confined Pest side.Along with the datasets used in previous numerical simulations (Szijártó et al, 2021 etc.), the Supervisory Authority for Regulatory Affairs Hungary (SARA) has made available a new three-dimensional geological model of the study area. This updated model enables more accurate numerical simulations.In the numerical simulations of the recent study, we use the previous datasets and we are creating five two-dimensional cross-sections by Comsol Multiphysics. The evaluation includes a flow system and temperature analysis that relies on a comparison between model results and on-site measurement data. The primary objectives of the modelling include:(1) evaluating the connection between lukewarm and warm springs of the Central system and the thermal waters in the deep confined karst areas of Pest(2) assessing the structural separation of this system from adjacent Northern and Southern areas and its implications for geothermal exploration risks.This research is directly linked to geothermal risk assessment by testing how numerical model outputs can be integrated into the development of general methodologies for geological risk analysis.Preliminary findings suggest that the thermal springs of the Buda Thermal Karst Central system are connected to the regional discharge area at the Danube River. This indicates that the most favourable conditions for geothermal utilization can be found in areas near the Danube on the Pest side. However, these areas are also critical for protecting the water of the thermal baths, emphasizing the need to incorporate risk assessment into geothermal planning. The modelling results offer multiple applications concerning data integration. In this research, the theoretical temperature distribution estimated through statistical analysis of the model outputs can be used to predict the performance of geothermal projects and evaluate the geological feasibility of potential developments. This integrated approach highlights the importance of balancing geothermal energy utilization with conserving natural thermal resources.This research was carried out within the framework of the project RRF-2.3.1-21-2022-00014 of the Climate Change Multidisciplinary National Laboratory.Supported by the EKÖP-24 University Excellence Scholarship Program of the Ministry for Culture and Innovation from the Source of the National Research, Development and Innovation Fund. Contract number: ELTE/15380/1(2024)ReferencesErőss, A., Mádl-Szőnyi, J., Surbeck, H., Horváth, Á., Goldscheider, N., & Csoma, A. É. (2012). Radionuclides as natural tracers for the characterization of fluids in regional discharge areas, Buda Thermal Karst, Hungary. Journal of Hydrology, 426, 124-137.Szijártó, M., Galsa, A., Tóth, Á., & Mádl-Szőnyi, J. (2021). Numerical analysis of the potential for mixed thermal convection in the Buda Thermal Karst, Hungary. Journal of Hydrology: Regional Studies, 34, 100783, pp.2.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessConnections between Thermal Springs and Deep Geothermal Potential in the Buda Thermal Karst System
The Buda Thermal Karst is characterised by three geographically and geologically separated discharge areas along the Danube in the Buda Hills (Erőss et al, 2012 etc.). These contain lukewarm, lukewarm - warm and warm springs, respectively. This research aims to find an answer to the question of the separation and differences of these discharge areas and their significance in geothermal exploration under the confined Pest side.Along with the datasets used in previous numerical simulations (Szijártó et al, 2021 etc.), the Supervisory Authority for Regulatory Affairs Hungary (SARA) has made available a new three-dimensional geological model of the study area. This updated model enables more accurate numerical simulations.In the numerical simulations of the recent study, we use the previous datasets and we are creating five two-dimensional cross-sections by Comsol Multiphysics. The evaluation includes a flow system and temperature analysis that relies on a comparison between model results and on-site measurement data. The primary objectives of the modelling include:(1) evaluating the connection between lukewarm and warm springs of the Central system and the thermal waters in the deep confined karst areas of Pest(2) assessing the structural separation of this system from adjacent Northern and Southern areas and its implications for geothermal exploration risks.This research is directly linked to geothermal risk assessment by testing how numerical model outputs can be integrated into the development of general methodologies for geological risk analysis.Preliminary findings suggest that the thermal springs of the Buda Thermal Karst Central system are connected to the regional discharge area at the Danube River. This indicates that the most favourable conditions for geothermal utilization can be found in areas near the Danube on the Pest side. However, these areas are also critical for protecting the water of the thermal baths, emphasizing the need to incorporate risk assessment into geothermal planning. The modelling results offer multiple applications concerning data integration. In this research, the theoretical temperature distribution estimated through statistical analysis of the model outputs can be used to predict the performance of geothermal projects and evaluate the geological feasibility of potential developments. This integrated approach highlights the importance of balancing geothermal energy utilization with conserving natural thermal resources.This research was carried out within the framework of the project RRF-2.3.1-21-2022-00014 of the Climate Change Multidisciplinary National Laboratory.Supported by the EKÖP-24 University Excellence Scholarship Program of the Ministry for Culture and Innovation from the Source of the National Research, Development and Innovation Fund. Contract number: ELTE/15380/1(2024)ReferencesErőss, A., Mádl-Szőnyi, J., Surbeck, H., Horváth, Á., Goldscheider, N., & Csoma, A. É. (2012). Radionuclides as natural tracers for the characterization of fluids in regional discharge areas, Buda Thermal Karst, Hungary. Journal of Hydrology, 426, 124-137.Szijártó, M., Galsa, A., Tóth, Á., & Mádl-Szőnyi, J. (2021). Numerical analysis of the potential for mixed thermal convection in the Buda Thermal Karst, Hungary. Journal of Hydrology: Regional Studies, 34, 100783, pp.2.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Geological risk analysis of geothermal developments in a sedimentary basin, Hungary
In our research, we develop a novel methodology to evaluate the geological uncertainties of geothermal exploration in order to quantify them. The outcomes can be used as inputs when deciding on new geothermal investments. Adapted from the hydrocarbon industry probability of success is evaluated by estimating potential geological risk factors which can hinder geothermal production and reinjection, following the risk assessment scheme of petroleum play analysis.As a case study in a clastic geological environment, we test the methodology on the Zala Basin, a sedimentary subbasin of the Pannonian Basin, Hungary. Here, the Neogene (so-called Pannonian) sediments form one of the principal thermal water-reservoirs. Although the preliminary geothermal potential of the Zala region (SW Hungary) is assessed to be good, there is a need for more thorough analysis before starting new developments. As an example, heterogeneity of the deltaic and fluvial deposits poses geological risk. In our case study, we consider the risk of insufficient temperature, the absence of the appropriate aquifer formations, the bad quality of the aquifer i.e., the unfavourable distribution of the high permeable sandstone bodies, the insufficient permeability and flow rate as well as the potential risk of unsuccessful reinjection. This is done by combining and evaluating datasets from well data (lithology, well logs, well tests) and 3D seismic measurements. The goal of the assessment is to decide whether a future geothermal system can provide sufficient capacity, in the current case, for industrial or agricultural heat utilisation.The first author was supported, and the research was financed through the KDP-2021 Cooperative Doctoral Programme of the Ministry of Innovation and Technology (Hungary) from the source of the National Research, Development and Innovation Fund, grant number: KDP_2021_ELTE_C1789026. The study was funded by the National Multidisciplinary Laboratory for Climate Change, RRF-2.3.1-21- 2022-00014 project.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessGeological risk analysis of geothermal developments in a sedimentary basin, Hungary
In our research, we develop a novel methodology to evaluate the geological uncertainties of geothermal exploration in order to quantify them. The outcomes can be used as inputs when deciding on new geothermal investments. Adapted from the hydrocarbon industry probability of success is evaluated by estimating potential geological risk factors which can hinder geothermal production and reinjection, following the risk assessment scheme of petroleum play analysis.As a case study in a clastic geological environment, we test the methodology on the Zala Basin, a sedimentary subbasin of the Pannonian Basin, Hungary. Here, the Neogene (so-called Pannonian) sediments form one of the principal thermal water-reservoirs. Although the preliminary geothermal potential of the Zala region (SW Hungary) is assessed to be good, there is a need for more thorough analysis before starting new developments. As an example, heterogeneity of the deltaic and fluvial deposits poses geological risk. In our case study, we consider the risk of insufficient temperature, the absence of the appropriate aquifer formations, the bad quality of the aquifer i.e., the unfavourable distribution of the high permeable sandstone bodies, the insufficient permeability and flow rate as well as the potential risk of unsuccessful reinjection. This is done by combining and evaluating datasets from well data (lithology, well logs, well tests) and 3D seismic measurements. The goal of the assessment is to decide whether a future geothermal system can provide sufficient capacity, in the current case, for industrial or agricultural heat utilisation.The first author was supported, and the research was financed through the KDP-2021 Cooperative Doctoral Programme of the Ministry of Innovation and Technology (Hungary) from the source of the National Research, Development and Innovation Fund, grant number: KDP_2021_ELTE_C1789026. The study was funded by the National Multidisciplinary Laboratory for Climate Change, RRF-2.3.1-21- 2022-00014 project.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Geological risk analysis of geothermal developments in the Buda thermal karst area
The Buda Thermal Karst system is one of the best-known hypogenic karst areas. In addition, it is located below the city of Budapest. The groundwater of the confined and unconfined carbonate system is characterised by complex gravity and buoyancy-driven flow. It is associated with a complex geological setup characterised by significant heterogeneity in permeability distribution, resulting in exploration uncertainty. The utilisation of thermal water in the area goes back to the Roman Empire through springs, but from the 19th century, wells have been deepened. In Budapest, outstanding thermal wells and projects have been developed. However, several unsuccessful attempts also occurred in SE Budapest due to geological uncertainty, lack of knowledge and proper pre-analysis.Motivated by the green transition and the energy crisis, the geothermal utilisation of the thermal water in the area has become the focus of interest nowadays. The geothermal risk assessment can be a helpful tool to quantify the uncertainties of the exploration of such a complex system. In this research, we develop a novel methodology to analyse and quantify the geological risk of geothermal developments, focusing on the deep and thick carbonate reservoir. The new approach is adapted from the petroleum industry and follows the risk assessment scheme of petroleum play analysis.The methodology was tested in a local study area in northeast Budapest, where the required geothermal capacity for heating was previously determined. Here, the Neogene siliciclastic sediments cover the Triassic carbonates, which serve as thermal water reservoirs. To estimate whether a future geothermal system can provide sufficient capacity, in this study, the probability of success is assessed by evaluating potential geological risk factors which can hinder geothermal production and reinjection. This is done by combining and evaluating datasets on aquifer and water quality, temperature and flow conditions using lithological data, geophysical logs (cavities), temperature-elevation, and pressure-elevation profiles. The outcomes of the research help in decision-making while preparing new geothermal developments.This research was supported and financed through the KDP-2021 Cooperative Doctoral Programme of the Ministry of Culture and Innovation of Hungary from the source of the National Research, Development and Innovation Fund, grant number: KDP 2021 _ELTE_C 1789026. The research is funded by the National Multidisciplinary Laboratory for Climate Change, RRF-2.3.1-21-2022-00014 project.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessGeological risk analysis of geothermal developments in the Buda thermal karst area
The Buda Thermal Karst system is one of the best-known hypogenic karst areas. In addition, it is located below the city of Budapest. The groundwater of the confined and unconfined carbonate system is characterised by complex gravity and buoyancy-driven flow. It is associated with a complex geological setup characterised by significant heterogeneity in permeability distribution, resulting in exploration uncertainty. The utilisation of thermal water in the area goes back to the Roman Empire through springs, but from the 19th century, wells have been deepened. In Budapest, outstanding thermal wells and projects have been developed. However, several unsuccessful attempts also occurred in SE Budapest due to geological uncertainty, lack of knowledge and proper pre-analysis.Motivated by the green transition and the energy crisis, the geothermal utilisation of the thermal water in the area has become the focus of interest nowadays. The geothermal risk assessment can be a helpful tool to quantify the uncertainties of the exploration of such a complex system. In this research, we develop a novel methodology to analyse and quantify the geological risk of geothermal developments, focusing on the deep and thick carbonate reservoir. The new approach is adapted from the petroleum industry and follows the risk assessment scheme of petroleum play analysis.The methodology was tested in a local study area in northeast Budapest, where the required geothermal capacity for heating was previously determined. Here, the Neogene siliciclastic sediments cover the Triassic carbonates, which serve as thermal water reservoirs. To estimate whether a future geothermal system can provide sufficient capacity, in this study, the probability of success is assessed by evaluating potential geological risk factors which can hinder geothermal production and reinjection. This is done by combining and evaluating datasets on aquifer and water quality, temperature and flow conditions using lithological data, geophysical logs (cavities), temperature-elevation, and pressure-elevation profiles. The outcomes of the research help in decision-making while preparing new geothermal developments.This research was supported and financed through the KDP-2021 Cooperative Doctoral Programme of the Ministry of Culture and Innovation of Hungary from the source of the National Research, Development and Innovation Fund, grant number: KDP 2021 _ELTE_C 1789026. The research is funded by the National Multidisciplinary Laboratory for Climate Change, RRF-2.3.1-21-2022-00014 project.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Fossil to renewable – how to speed up the installation of borehole heat exchangers?
Geothermal heat pumps coupled with borehole heat exchangers are appropriate tools to extract renewable and climate- friendly energy from the shallow subsurface. To properly construct these systems, knowing the initial temperature conditions is essential. However, drilling activity modifies the temperature field in the underground around the borehole as well as in the pipe placed into the borehole. During the installation it has to wait for a constant temperature in the pipe after the probe is placed, before measuring the final temperature. According to the rule of thumb, this period is usually one week. The objective of this study is to determine whether this time is really necessary or if a shorter period would be also enough for reaching the undisturbed temperature. The measurements took place in the 11. district of Budapest, Hungary. The analysed borehole was drilled with rotary method deepened into the Budai Marl Formation with a depth of 70 metres. We executed four measurements on the first day, two on the next day, and one after that for four days. The most significant differences can be noticed between the first day measurements. After the third day, the received curves fit better, but they only approached each other from the fourth day with only 0.1-0.2°C difference. It can be concluded that a stable temperature profile required 72 hours of resting for this specific case which is shorter than the supposed one week. With this knowledge, assuming similar behaviour in other cases, installation period of borehole heat exchangers can be significantly shortened. Next step of this research is investigating other geological and seasonal conditions to reveal potential deviations from the current results.The study was funded by the National Multidisciplinary Laboratory for Climate Change, RRF-2.3.1-21- 2022-00014 project.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessFossil to renewable – how to speed up the installation of borehole heat exchangers?
Geothermal heat pumps coupled with borehole heat exchangers are appropriate tools to extract renewable and climate- friendly energy from the shallow subsurface. To properly construct these systems, knowing the initial temperature conditions is essential. However, drilling activity modifies the temperature field in the underground around the borehole as well as in the pipe placed into the borehole. During the installation it has to wait for a constant temperature in the pipe after the probe is placed, before measuring the final temperature. According to the rule of thumb, this period is usually one week. The objective of this study is to determine whether this time is really necessary or if a shorter period would be also enough for reaching the undisturbed temperature. The measurements took place in the 11. district of Budapest, Hungary. The analysed borehole was drilled with rotary method deepened into the Budai Marl Formation with a depth of 70 metres. We executed four measurements on the first day, two on the next day, and one after that for four days. The most significant differences can be noticed between the first day measurements. After the third day, the received curves fit better, but they only approached each other from the fourth day with only 0.1-0.2°C difference. It can be concluded that a stable temperature profile required 72 hours of resting for this specific case which is shorter than the supposed one week. With this knowledge, assuming similar behaviour in other cases, installation period of borehole heat exchangers can be significantly shortened. Next step of this research is investigating other geological and seasonal conditions to reveal potential deviations from the current results.The study was funded by the National Multidisciplinary Laboratory for Climate Change, RRF-2.3.1-21- 2022-00014 project.
- Open Access
- 25 November 2024
- Published by Akademiai Kiado Zrt. in Scientia et Securitas
- Vol. 5 (2) , 199-210
Termálvíz-visszasajtolás és fenntarthatóság – a visszasajtolási potenciál előrejelzési lehetőségei homokkő rezervoárok esetén
A termálvizek visszasajtolása az országos és települési szintű hosszú távú energiabiztonság szempontjából kulcsfontosságú: hozzájárul az energiaforrás fenntartható felhasználásához, megnövelve a beruházások élettartamát. Bár számos potenciális nehézség merül fel, ez nem jelenthet mentséget a visszasajtolás hiányára. A kidolgozott eljárással, a problémák előrejelzésével a visszasajtolási lehetőségek értékelhetők, és – a geotermikus potenciálbecslés részeként – kijelölhetők az arra legalkalmasabb területek. A kutatásban eddig a Zalai-medence mintaterületén regionális hidraulikai, formáció és rezervoártest léptékű értékelést végeztük el: a zalai pannon képződményeknél a nyomásviszonyok nem okoznak problémát, míg a rezervoárlépték jelentős heterogenitást mutat, ami befolyásolja a visszasajtolás hatékonyságát.
- 25 November 2024
- Published by Akademiai Kiado Zrt. in Scientia et Securitas
- Vol. 5 (2) , 199-210
Open AccessTermálvíz-visszasajtolás és fenntarthatóság – a visszasajtolási potenciál előrejelzési lehetőségei homokkő rezervoárok esetén
A termálvizek visszasajtolása az országos és települési szintű hosszú távú energiabiztonság szempontjából kulcsfontosságú: hozzájárul az energiaforrás fenntartható felhasználásához, megnövelve a beruházások élettartamát. Bár számos potenciális nehézség merül fel, ez nem jelenthet mentséget a visszasajtolás hiányára. A kidolgozott eljárással, a problémák előrejelzésével a visszasajtolási lehetőségek értékelhetők, és – a geotermikus potenciálbecslés részeként – kijelölhetők az arra legalkalmasabb területek. A kutatásban eddig a Zalai-medence mintaterületén regionális hidraulikai, formáció és rezervoártest léptékű értékelést végeztük el: a zalai pannon képződményeknél a nyomásviszonyok nem okoznak problémát, míg a rezervoárlépték jelentős heterogenitást mutat, ami befolyásolja a visszasajtolás hatékonyságát.
- Open Access
- 22 October 2024
- Published by Springer Nature in Geothermal Energy
- Vol. 12 (1) , 1-29
Controls of low injectivity caused by interaction of reservoir and clogging processes in a sedimentary geothermal aquifer (Mezőberény, Hungary)
Low injectivity is often experienced in geothermal doublets installed in sandstone reservoirs. This even led to a shutdown of the Mezőberény (Hungary) geothermal site. An on-site campaign was carried out in January 2021 to prepare a stimulation aiming to enhance the transmissivity of the sedimentary reservoir and the near-wellbore zone of this site. Previous studies have concluded that insufficient injectivity may be linked to a high skin effect in the near well-bore zone and pore clogging in combination with the low net sandstone content of the fluvio-deltaic reservoir. A chemical soft stimulation based on the injection of hydrochloric acid (HCl) was successfully used to unclog and recover the well injectivity. Despite such empirical evidence, the geochemical mechanisms leading to both, detrimental formation of clogging and the HCl-driven transmissivity restoration, have not yet been elucidated. This work presents the results of a novel analysis aiming at (a) predicting the dominant type of clogging forming in the near-well bore zone; (b) quantifying the drop in hydraulic conductivity as clogging occurs; and (c) supporting the optimization of the HCl dosage during the chemical soft stimulation. The study is supported by new experimental datasets never presented before from the Mezőberény site and a geochemical model set-up simulating the main mechanisms involved in the clogging and unclogging processes. It is concluded that the biofilm formation was the dominant, while the precipitation of calcite and amorphous ferrihydrite—later reduced to magnetite by microbes—was the secondary clogging mechanism: In the long-term (yearly scale) simulating the hydraulic conductivity showed a decline with forming scales; therefore, biofilm was presumably responsible for the experienced rapid (1 month) clogging. When modelling the chemical stimulation, the estimated amount of precipitated minerals was dissolved already with 2.5 mol of HCl per liter of water (~ 10 m/m%). Therefore, the 20 m/m% of HCl chosen during the field campaign might had a beneficial effect dissolving the potentially higher amount of scaling and/or the carbonate minerals of the matrix near the wellbore. Overall, it is concluded that the chemical and the microbial analyses together with the geochemical model were critical to tailor the remediation attempts and to propose further development or reconstruction of the surface system before going into operation to prevent recurrent impairments. Our findings highlight the importance of interactions of various clogging mechanisms with each other as well as with the reservoir processes and provide approaches to tackle the issue of injectivity drop by characterizing and quantifying their effects.
- 22 October 2024
- Published by Springer Nature in Geothermal Energy
- Vol. 12 (1) , 1-29
Open AccessControls of low injectivity caused by interaction of reservoir and clogging processes in a sedimentary geothermal aquifer (Mezőberény, Hungary)
Low injectivity is often experienced in geothermal doublets installed in sandstone reservoirs. This even led to a shutdown of the Mezőberény (Hungary) geothermal site. An on-site campaign was carried out in January 2021 to prepare a stimulation aiming to enhance the transmissivity of the sedimentary reservoir and the near-wellbore zone of this site. Previous studies have concluded that insufficient injectivity may be linked to a high skin effect in the near well-bore zone and pore clogging in combination with the low net sandstone content of the fluvio-deltaic reservoir. A chemical soft stimulation based on the injection of hydrochloric acid (HCl) was successfully used to unclog and recover the well injectivity. Despite such empirical evidence, the geochemical mechanisms leading to both, detrimental formation of clogging and the HCl-driven transmissivity restoration, have not yet been elucidated. This work presents the results of a novel analysis aiming at (a) predicting the dominant type of clogging forming in the near-well bore zone; (b) quantifying the drop in hydraulic conductivity as clogging occurs; and (c) supporting the optimization of the HCl dosage during the chemical soft stimulation. The study is supported by new experimental datasets never presented before from the Mezőberény site and a geochemical model set-up simulating the main mechanisms involved in the clogging and unclogging processes. It is concluded that the biofilm formation was the dominant, while the precipitation of calcite and amorphous ferrihydrite—later reduced to magnetite by microbes—was the secondary clogging mechanism: In the long-term (yearly scale) simulating the hydraulic conductivity showed a decline with forming scales; therefore, biofilm was presumably responsible for the experienced rapid (1 month) clogging. When modelling the chemical stimulation, the estimated amount of precipitated minerals was dissolved already with 2.5 mol of HCl per liter of water (~ 10 m/m%). Therefore, the 20 m/m% of HCl chosen during the field campaign might had a beneficial effect dissolving the potentially higher amount of scaling and/or the carbonate minerals of the matrix near the wellbore. Overall, it is concluded that the chemical and the microbial analyses together with the geochemical model were critical to tailor the remediation attempts and to propose further development or reconstruction of the surface system before going into operation to prevent recurrent impairments. Our findings highlight the importance of interactions of various clogging mechanisms with each other as well as with the reservoir processes and provide approaches to tackle the issue of injectivity drop by characterizing and quantifying their effects.