Osmel Martínez Rosabal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Osmel Martínez Rosabal has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Onel Luis Alcaraz López
University of Oulu
13 shared publications - Hirley Alves
Centre for Wireless Communications (CWC), University of Oulu, Oulu, Finland
11 shared publications - Mohammad Shehab
Networks Department, German University, Cairo, Egypt
5 shared publications - Richard Demo Souza
Department of Electrical and Electronics Engineering, Federal University of Santa Catarina, Florianópolis, Brazil
4 shared publications - Dian Echevarría Pérez
Centre for Wireless Communications (CWC), University of Oulu, Oulu, Finland
3 shared publications - Matti Latva-Aho
Centre for Wireless Communications (CWC), University of Oulu, Oulu, Finland
3 shared publications
Latest Publications
- Open Access
- 13 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 2629-2633
Movable Antennas-Aided Wireless Energy Transfer for the Internet of Things
Recent advancements in movable antennas (MAs) technology create new opportunities for 6G and beyond wireless systems. MAs are promising for radio frequency wireless energy transfer because they can dynamically adjust antenna positions, improving energy efficiency and scalability. This work aims to minimize the transmit power by an analog beamforming power beacon equipped with independently-controlled MAs (IMAs) for charging multiple single-antenna devices. To this end, we enforce a minimum separation among antennas and a minimum received power at the devices. The resulting optimization problem is nonlinear and nonconvex due to interdependencies among the variables. To tackle this, we propose a semidefinite program guided particle swarm optimization (SgPSO) algorithm where each particle represents an antenna configuration, and the fitness function optimizes the corresponding power allocation. SgPSO is utilized for configuring the MAs, which largely outperformed fixed array implementations, particularly with more antennas or devices. We also present an alternative implementation using uniformly-spaced MAs, whose performance closely approaches that of the IMAs, with the gap widening only as the number of devices grows. We also examine how increasing the number of antennas promotes near-field conditions, which decrease as devices become more widely distributed.
- 13 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 2629-2633
Open AccessMovable Antennas-Aided Wireless Energy Transfer for the Internet of Things
Recent advancements in movable antennas (MAs) technology create new opportunities for 6G and beyond wireless systems. MAs are promising for radio frequency wireless energy transfer because they can dynamically adjust antenna positions, improving energy efficiency and scalability. This work aims to minimize the transmit power by an analog beamforming power beacon equipped with independently-controlled MAs (IMAs) for charging multiple single-antenna devices. To this end, we enforce a minimum separation among antennas and a minimum received power at the devices. The resulting optimization problem is nonlinear and nonconvex due to interdependencies among the variables. To tackle this, we propose a semidefinite program guided particle swarm optimization (SgPSO) algorithm where each particle represents an antenna configuration, and the fitness function optimizes the corresponding power allocation. SgPSO is utilized for configuring the MAs, which largely outperformed fixed array implementations, particularly with more antennas or devices. We also present an alternative implementation using uniformly-spaced MAs, whose performance closely approaches that of the IMAs, with the gap widening only as the number of devices grows. We also examine how increasing the number of antennas promotes near-field conditions, which decrease as devices become more widely distributed.
- 16 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 2288-2292
Wireless Energy Transfer From Space to Ground via Satellite Constellation Grids
This letter presents a framework for space-to-ground wireless energy transfer (WET) for wirelessly chargeable devices (WCD) located in remote areas or disaster situations. We consider a grid of multi-antenna satellites that charge a WCD within line-of-sight. Closed-form expressions for harvested energy are derived considering maximum ratio transmission (MRT) ensuring that the WCD meets its circuit charging threshold Pth. Simulations elucidate that milli-joule-level energy can be harvested during satellite grid visibility, with charging efficiency influenced by the number of satellites, their altitude, charging frequency, and grid inclination. All codes used in this paper can be found from: https://github. com/moshehab570/Satellite_WET.git.
- 16 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 2288-2292
Wireless Energy Transfer From Space to Ground via Satellite Constellation Grids
This letter presents a framework for space-to-ground wireless energy transfer (WET) for wirelessly chargeable devices (WCD) located in remote areas or disaster situations. We consider a grid of multi-antenna satellites that charge a WCD within line-of-sight. Closed-form expressions for harvested energy are derived considering maximum ratio transmission (MRT) ensuring that the WCD meets its circuit charging threshold Pth. Simulations elucidate that milli-joule-level energy can be harvested during satellite grid visibility, with charging efficiency influenced by the number of satellites, their altitude, charging frequency, and grid inclination. All codes used in this paper can be found from: https://github. com/moshehab570/Satellite_WET.git.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Magazine
- p. 1-7
Power from Space: Coordinated Satellite Charging for Off-Grid Wireless Systems
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Magazine
- p. 1-7
Open AccessPower from Space: Coordinated Satellite Charging for Off-Grid Wireless Systems
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 28, 7048-7091
A Survey on Ambient IoT: Use Cases, Standardization, Enabling Technologies, and Research Directions
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 28, 7048-7091
Open AccessA Survey on Ambient IoT: Use Cases, Standardization, Enabling Technologies, and Research Directions
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 7, 6984-6999
On the Trade-Offs of Statistical CSI and CSI-Free Energy Beamforming for Batteryless MTC
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 7, 6984-6999
Open AccessOn the Trade-Offs of Statistical CSI and CSI-Free Energy Beamforming for Batteryless MTC
- Open Access
- 29 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 6332-6346
Wireless Energy Transfer Beamforming Optimization for Intelligent Transmitting Surface
Radio frequency (RF) wireless energy transfer (WET) is a promising technology for powering the growing ecosystem of Internet of Things (IoT) using power beacons (PBs). Recent research focuses on efficient PB architectures that can support numerous antennas. In this context, PBs equipped with intelligent surfaces present a promising approach, enabling physically large, reconfigurable arrays. Motivated by these advantages, this work aims to minimize the power consumption of a PB equipped with a passive intelligent transmitting surface (ITS) and a collocated digital beamforming-based feeder to charge multiple single-antenna devices. To model the PB’s power consumption accurately, we consider power amplifiers nonlinearities, ITS control power, and feeder-to-ITS air interface losses. The resulting optimization problem is highly nonlinear and nonconvex due to the high-power amplifier (HPA), the received power constraints at the devices, and the unit-modulus constraint imposed by the phase shifter configuration of the ITS. To tackle this issue, we apply successive convex approximation (SCA) to iteratively solve convex subproblems that jointly optimize the digital precoder and phase configuration. Given SCA’s sensitivity to initialization, we propose an algorithm that ensures initialization feasibility while balancing convergence speed and solution quality. We compare the proposed ITS-equipped PB’s power consumption against benchmark architectures featuring digital and hybrid analogdigital beamforming. Results demonstrate that the proposed architecture efficiently scales with the number of RF chains and ITS elements. We also show that nonuniform ITS power distribution influences beamforming and can shift a device between near- and far-field regions, even with a constant aperture.
- 29 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 6332-6346
Open AccessWireless Energy Transfer Beamforming Optimization for Intelligent Transmitting Surface
Radio frequency (RF) wireless energy transfer (WET) is a promising technology for powering the growing ecosystem of Internet of Things (IoT) using power beacons (PBs). Recent research focuses on efficient PB architectures that can support numerous antennas. In this context, PBs equipped with intelligent surfaces present a promising approach, enabling physically large, reconfigurable arrays. Motivated by these advantages, this work aims to minimize the power consumption of a PB equipped with a passive intelligent transmitting surface (ITS) and a collocated digital beamforming-based feeder to charge multiple single-antenna devices. To model the PB’s power consumption accurately, we consider power amplifiers nonlinearities, ITS control power, and feeder-to-ITS air interface losses. The resulting optimization problem is highly nonlinear and nonconvex due to the high-power amplifier (HPA), the received power constraints at the devices, and the unit-modulus constraint imposed by the phase shifter configuration of the ITS. To tackle this issue, we apply successive convex approximation (SCA) to iteratively solve convex subproblems that jointly optimize the digital precoder and phase configuration. Given SCA’s sensitivity to initialization, we propose an algorithm that ensures initialization feasibility while balancing convergence speed and solution quality. We compare the proposed ITS-equipped PB’s power consumption against benchmark architectures featuring digital and hybrid analogdigital beamforming. Results demonstrate that the proposed architecture efficiently scales with the number of RF chains and ITS elements. We also show that nonuniform ITS power distribution influences beamforming and can shift a device between near- and far-field regions, even with a constant aperture.
- 3 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (14) , 23025-23033
An Analog Beamforming Strategy Based on Statistical Channel Information for Recharging Wireless Powered Sensor Networks
Wireless energy transfer (WET) technology is key for future wireless networks as it can enable uninterrupted and maintenance-free operation of Internet of Things (IoT) networks, which will be composed of billions of wireless sensors. Although, perfect channel state information (PCSI) is appealing for beamforming design at the power beacon (PB). Such knowledge is unavailable in most practical WET systems and is mostly of theoretical interest. In this paper, we propose a novel WET approach to minimize the total power recharging time of the devices within a Wireless Powered Sensor Network (WPSN) by designing the analog beamforming at the PB based only on statistical CSI (SCSI) knowledge. The devices efficiently recharge also by harvesting energy from the WET signals targeting nearby devices. Finally, we verified that opportunistically exploiting the recharging times of neighboring devices reduces the total recharging time by up to 70% than when each device is recharged independently. We also demonstrate that the proposed strategy based on SCSI considerably reduces the performance difference with a WET system based on PCSI, achieving significantly low recharged times by accessible information.
- 3 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (14) , 23025-23033
An Analog Beamforming Strategy Based on Statistical Channel Information for Recharging Wireless Powered Sensor Networks
Wireless energy transfer (WET) technology is key for future wireless networks as it can enable uninterrupted and maintenance-free operation of Internet of Things (IoT) networks, which will be composed of billions of wireless sensors. Although, perfect channel state information (PCSI) is appealing for beamforming design at the power beacon (PB). Such knowledge is unavailable in most practical WET systems and is mostly of theoretical interest. In this paper, we propose a novel WET approach to minimize the total power recharging time of the devices within a Wireless Powered Sensor Network (WPSN) by designing the analog beamforming at the PB based only on statistical CSI (SCSI) knowledge. The devices efficiently recharge also by harvesting energy from the WET signals targeting nearby devices. Finally, we verified that opportunistically exploiting the recharging times of neighboring devices reduces the total recharging time by up to 70% than when each device is recharged independently. We also demonstrate that the proposed strategy based on SCSI considerably reduces the performance difference with a WET system based on PCSI, achieving significantly low recharged times by accessible information.
- Open Access
- 4 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (8) , 12160-12165
Energy-Efficient Analog Beamforming for RF-WET With Charging Time Constraint
Internet of Things (IoT) sustainability may hinge on radio frequency wireless energy transfer (RF-WET). However, energy-efficient charging strategies are still needed, motivating our work. Specifically, this letter proposes a time division scheme to efficiently charge low-power devices in an IoT network. For this, a multi-antenna power beacon (PB) drives the devices' energy harvesting circuit to the highest power conversion efficiency point via energy beamforming, thus achieving minimum energy consumption. Herein, we adopt the analog multi-antenna architecture due to its low complexity, cost, and energy consumption. The proposal includes a simple yet accurate model for the transfer characteristic of the energy harvesting circuit, enabling the optimization framework. The results evince the effectiveness of our RF-WET strategy over a benchmark scheme where the PB charges all the IoT devices simultaneously. Furthermore, the performance increases with the number of PB antennas.
- 4 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (8) , 12160-12165
Open AccessEnergy-Efficient Analog Beamforming for RF-WET With Charging Time Constraint
Internet of Things (IoT) sustainability may hinge on radio frequency wireless energy transfer (RF-WET). However, energy-efficient charging strategies are still needed, motivating our work. Specifically, this letter proposes a time division scheme to efficiently charge low-power devices in an IoT network. For this, a multi-antenna power beacon (PB) drives the devices' energy harvesting circuit to the highest power conversion efficiency point via energy beamforming, thus achieving minimum energy consumption. Herein, we adopt the analog multi-antenna architecture due to its low complexity, cost, and energy consumption. The proposal includes a simple yet accurate model for the transfer characteristic of the energy harvesting circuit, enabling the optimization framework. The results evince the effectiveness of our RF-WET strategy over a benchmark scheme where the PB charges all the IoT devices simultaneously. Furthermore, the performance increases with the number of PB antennas.
- Open Access
- 27 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 133979-133992
Sustainable RF Wireless Energy Transfer for Massive IoT: Enablers and Challenges
Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which can unlock a myriad of new use cases. In this context, sustainable radio frequency wireless energy transfer emerges as an attractive solution for efficiently charging the next generation of ultra low power IoT devices. Herein, we highlight that sustainable charging is broader than conventional green charging, as it focuses on balancing economy prosperity and social equity in addition to environmental health. We discuss the economic implications of powering energy transmitters with ambient energy sources, and reveal insights on their optimal deployment. Moreover, we overview different methods for modeling the energy arrival process of ambient energy sources and discuss their application in different use cases. We highlight the potential of integrating sustainable WET with energy harvesting from nearby transmitters and discuss enhancements in energy receiver design. We also illustrate the role of different technologies in enabling sustainable WET and exemplify various use cases. Besides, we reveal insights into low-complexity architectures designed at the energy transmitters. We highlight relevant research challenges and candidate solutions.
- 27 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 133979-133992
Open AccessSustainable RF Wireless Energy Transfer for Massive IoT: Enablers and Challenges
Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which can unlock a myriad of new use cases. In this context, sustainable radio frequency wireless energy transfer emerges as an attractive solution for efficiently charging the next generation of ultra low power IoT devices. Herein, we highlight that sustainable charging is broader than conventional green charging, as it focuses on balancing economy prosperity and social equity in addition to environmental health. We discuss the economic implications of powering energy transmitters with ambient energy sources, and reveal insights on their optimal deployment. Moreover, we overview different methods for modeling the energy arrival process of ambient energy sources and discuss their application in different use cases. We highlight the potential of integrating sustainable WET with energy harvesting from nearby transmitters and discuss enhancements in energy receiver design. We also illustrate the role of different technologies in enabling sustainable WET and exemplify various use cases. Besides, we reveal insights into low-complexity architectures designed at the energy transmitters. We highlight relevant research challenges and candidate solutions.
- Open Access
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings of the IEEE
- Vol. 111 (11) , 1502-1543
Statistical Tools and Methodologies for Ultrareliable Low-Latency Communication—A Tutorial
Ultrareliable low-latency communication (URLLC) constitutes a key service class of the fifth generation (5G) and beyond cellular networks. Notably, designing and supporting URLLC pose a herculean task due to the fundamental need to identify and accurately characterize the underlying statistical models in which the system operates, e.g., interference statistics, channel conditions, and the behavior of protocols. In general, multilayer end-to-end approaches considering all the potential delay and error sources and proper statistical tools and methodologies are inevitably required for providing strong reliability and latency guarantees. This article contributes to the body of knowledge in the latter aspect by providing a tutorial on several statistical tools and methodologies that are useful for designing and analyzing URLLC systems. Specifically, we overview the frameworks related to the following: 1) reliability theory; 2) short packet communications; 3) inequalities, distribution bounds, and tail approximations; 4) rare-events simulation; 5) queuing theory and information freshness; and 6) large-scale tools, such as stochastic geometry, clustering, compressed sensing, and mean-field (MF) games. Moreover, we often refer to prominent data-driven algorithms within the scope of the discussed tools/methodologies. Throughout this article, we briefly review the state-of-the-art works using the addressed tools and methodologies, and their link to URLLC systems. Moreover, we discuss novel application examples focused on physical and medium access control layers. Finally, key research challenges and directions are highlighted to elucidate how URLLC analysis/design research may evolve in the coming years.
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings of the IEEE
- Vol. 111 (11) , 1502-1543
Open AccessStatistical Tools and Methodologies for Ultrareliable Low-Latency Communication—A Tutorial
Ultrareliable low-latency communication (URLLC) constitutes a key service class of the fifth generation (5G) and beyond cellular networks. Notably, designing and supporting URLLC pose a herculean task due to the fundamental need to identify and accurately characterize the underlying statistical models in which the system operates, e.g., interference statistics, channel conditions, and the behavior of protocols. In general, multilayer end-to-end approaches considering all the potential delay and error sources and proper statistical tools and methodologies are inevitably required for providing strong reliability and latency guarantees. This article contributes to the body of knowledge in the latter aspect by providing a tutorial on several statistical tools and methodologies that are useful for designing and analyzing URLLC systems. Specifically, we overview the frameworks related to the following: 1) reliability theory; 2) short packet communications; 3) inequalities, distribution bounds, and tail approximations; 4) rare-events simulation; 5) queuing theory and information freshness; and 6) large-scale tools, such as stochastic geometry, clustering, compressed sensing, and mean-field (MF) games. Moreover, we often refer to prominent data-driven algorithms within the scope of the discussed tools/methodologies. Throughout this article, we briefly review the state-of-the-art works using the addressed tools and methodologies, and their link to URLLC systems. Moreover, we discuss novel application examples focused on physical and medium access control layers. Finally, key research challenges and directions are highlighted to elucidate how URLLC analysis/design research may evolve in the coming years.