Zhifei Lu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhifei Lu has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- He Tang
School of Integrated Circuit Science and Engineering (Exemplary School of Microelectronic), University of Electronic Science and Technology of China (UESTC), Chengdu, China
8 shared publications - Xizhu Peng
School of Integrated Circuit Science and Engineering (Exemplary School of Microelectronic), University of Electronic Science and Technology of China (UESTC), Chengdu, China
8 shared publications - Yutao Peng
School of Integrated Circuit Science and Engineering (Exemplary School of Microelectronic), University of Electronic Science and Technology of China (UESTC), Chengdu, China
5 shared publications - Boyuan Zhang
School of Integrated Circuit Science and Engineering (Exemplary School of Microelectronics), University of Electronic Science and Technology of China (UESTC), Chengdu, China
3 shared publications Dongbing Fu
Chongqing GigaChip Technology Company Ltd., Chongqing, China
2 shared publications- Hu Wang
School of Integrated Circuit Science and Engineering (Exemplary School of Microelectronics), University of Electronic Science and Technology of China, Chengdu, China
2 shared publications
Latest Publications
- 28 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (6) , 2020-2024
A Fast Convergence Background Calibration Technique for Gain Nonlinearity in Pipeline ADCs
A novel background calibration technique for gain nonlinearity in pipeline analog-to-digital converters (ADCs) with fast convergence is presented in this brief. The proposed method leverages dual-comparator parallel calibration (DCPC) and multiplying digital-to-analog converter (MDAC) dither injection to extract inter-stage gain error (IGE), gain nonlinearity, and capacitor mismatch. This method employs a large dither window and a low-complexity algorithm to achieve fast convergence. Compared with prior dither-based calibration works, this work avoids introducing additional residue signal swing increment, thereby relaxing the design requirements of the residue amplifier (RA). Simulations demonstrate that the calibration technique improves the signal-to-noise-and-distortion ratio (SNDR) and spurious-free dynamic range (SFDR) by 30.5 and 36.6 dB, respectively, in a 14-bit 1-Gsps pipeline ADC affected by IGE, gain nonlinearity, capacitor mismatch, and −74 dB thermal noise. The convergence requires only $1.25{\,}\times{\,}10^{6}$ conversions, representing an at least eightfold improvement over prior art.
- 28 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (6) , 2020-2024
A Fast Convergence Background Calibration Technique for Gain Nonlinearity in Pipeline ADCs
A novel background calibration technique for gain nonlinearity in pipeline analog-to-digital converters (ADCs) with fast convergence is presented in this brief. The proposed method leverages dual-comparator parallel calibration (DCPC) and multiplying digital-to-analog converter (MDAC) dither injection to extract inter-stage gain error (IGE), gain nonlinearity, and capacitor mismatch. This method employs a large dither window and a low-complexity algorithm to achieve fast convergence. Compared with prior dither-based calibration works, this work avoids introducing additional residue signal swing increment, thereby relaxing the design requirements of the residue amplifier (RA). Simulations demonstrate that the calibration technique improves the signal-to-noise-and-distortion ratio (SNDR) and spurious-free dynamic range (SFDR) by 30.5 and 36.6 dB, respectively, in a 14-bit 1-Gsps pipeline ADC affected by IGE, gain nonlinearity, capacitor mismatch, and −74 dB thermal noise. The convergence requires only $1.25{\,}\times{\,}10^{6}$ conversions, representing an at least eightfold improvement over prior art.
- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (8) , 1008-1012
A Neural Network-Enhanced Digital Background Calibration Algorithm for Residue Amplifier Nonlinearity in Pipelined ADCs
This paper proposes a neural network-enhanced digital background calibration scheme for calibrating the linear and the third-order nonlinear gain errors of the residue amplifier (RA) in pipelined ADCs. A customized convolutional neural network (CNN) is designed to extract the information of the linear and the third-order nonlinear gain errors of RA with dither injection. Compared to traditional correlation-based calibration algorithms, the proposed method can significantly improve convergence speed and robustness against dither capacitor mismatch. Compared with previous neural networkbased calibration techniques which are commonly used for foreground calibration, the proposed method can operate in background to follow error variations without any risk of signal fidelity problems. Off-chip validation with a silicon-proven 14-bit 1.3 GS/s pipelined ADC shows that, after calibration, the SNDR and SFDR are improved from 46.6 dB and 55.2 dB to 63.1 dB and 80.4 dB, respectively. Moreover, the proposed method takes only 75K samples to reach convergence, whereas traditional algorithms require several to hundreds of millions of samples to achieve convergence (102 104 times faster). The implementation result shows that the power consumption of the proposed calibrator is 34.8 mW at 1.3 GHz clock frequency.
- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (8) , 1008-1012
A Neural Network-Enhanced Digital Background Calibration Algorithm for Residue Amplifier Nonlinearity in Pipelined ADCs
This paper proposes a neural network-enhanced digital background calibration scheme for calibrating the linear and the third-order nonlinear gain errors of the residue amplifier (RA) in pipelined ADCs. A customized convolutional neural network (CNN) is designed to extract the information of the linear and the third-order nonlinear gain errors of RA with dither injection. Compared to traditional correlation-based calibration algorithms, the proposed method can significantly improve convergence speed and robustness against dither capacitor mismatch. Compared with previous neural networkbased calibration techniques which are commonly used for foreground calibration, the proposed method can operate in background to follow error variations without any risk of signal fidelity problems. Off-chip validation with a silicon-proven 14-bit 1.3 GS/s pipelined ADC shows that, after calibration, the SNDR and SFDR are improved from 46.6 dB and 55.2 dB to 63.1 dB and 80.4 dB, respectively. Moreover, the proposed method takes only 75K samples to reach convergence, whereas traditional algorithms require several to hundreds of millions of samples to achieve convergence (102 104 times faster). The implementation result shows that the power consumption of the proposed calibrator is 34.8 mW at 1.3 GHz clock frequency.
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (6) , 2497-2508
Kolmogorov-Arnold Networks-Based Calibration for Single-Channel ADCs: High-Precision Nonlinear Code Synthesis With Low Power Consumption
This paper presents a novel calibration scheme for single-channel SAR, pipelined and pipelined-SAR ADCs using Kolmogorov–Arnold networks (KANs). In the proposed scheme, a multi-sample KAN (MS-KAN) is designed to realize nonlinear code synthesis (NLCS), achieving effective calibration for general nonlinear errors. The MS-KAN-based calibrator can be converted into an analytical expression, making the calibration process transparent, with stronger interpretability, predictability and reliability compared to previous neural network-based calibration algorithms, and assisting in the analysis of ADC nonidealities. Meanwhile, the proposed scheme achieves high calibration performance with low hardware overhead. The proposed scheme also requires much fewer training samples, thereby reducing the effort required for both chip testing and network training. The MS-KAN-based calibrator is verified with two silicon-proven ADCs, a 14-bit 1.3 GS/s pipelined ADC and a 10-bit 700MS/s SAR ADC. Measurement results show that SFDR is improved by 11.5 dB to 30.9 dB after calibration. The quantized calibrators are implemented on both FPGA and 28nm CMOS technology, where a piecewise polynomial (PWP) method is adopted to simplify the implementation of the calibrator. The post-layout simulation results show that the calibrator for the real-time calibration of the pipelined ADC consumes only 6.32 mW, while the calibrator for the SAR ADC consumes 2.42 mW.
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (6) , 2497-2508
Kolmogorov-Arnold Networks-Based Calibration for Single-Channel ADCs: High-Precision Nonlinear Code Synthesis With Low Power Consumption
This paper presents a novel calibration scheme for single-channel SAR, pipelined and pipelined-SAR ADCs using Kolmogorov–Arnold networks (KANs). In the proposed scheme, a multi-sample KAN (MS-KAN) is designed to realize nonlinear code synthesis (NLCS), achieving effective calibration for general nonlinear errors. The MS-KAN-based calibrator can be converted into an analytical expression, making the calibration process transparent, with stronger interpretability, predictability and reliability compared to previous neural network-based calibration algorithms, and assisting in the analysis of ADC nonidealities. Meanwhile, the proposed scheme achieves high calibration performance with low hardware overhead. The proposed scheme also requires much fewer training samples, thereby reducing the effort required for both chip testing and network training. The MS-KAN-based calibrator is verified with two silicon-proven ADCs, a 14-bit 1.3 GS/s pipelined ADC and a 10-bit 700MS/s SAR ADC. Measurement results show that SFDR is improved by 11.5 dB to 30.9 dB after calibration. The quantized calibrators are implemented on both FPGA and 28nm CMOS technology, where a piecewise polynomial (PWP) method is adopted to simplify the implementation of the calibrator. The post-layout simulation results show that the calibrator for the real-time calibration of the pipelined ADC consumes only 6.32 mW, while the calibrator for the SAR ADC consumes 2.42 mW.
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (1) , 48-52
A Novel NN-Based Fast-Convergence Background Calibration for Timing Mismatch in TI ADCs
A novel background calibration technique for timing mismatch in time-interleaved ADCs (TI ADCs) with fast convergence speed is presented in this brief. The proposed calibration applies a customized neural network (NN) to extract the information of timing skews for compensation. Compared to the conventional background methods for calibrating timing mismatches without reference, this brief significantly increases the convergence speed with high accuracy. In comparison with prior NN-based calibration works, this brief could follow the error changes in the background and has stronger robustness, also without any risk of fidelity problem. A 12-bit 3GSps 4-channel TI ADC model with noise and jitter is simulated for verifying the effectiveness of this technique. Simulation results show that the proposed technique could improve the SNDR and SFDR by 7.41dB and 24.73dB respectively, with only 1536 samples for convergence. Off-chip validation with a 12-bit 3GSps 4-channel TI ADC also proves the effectiveness and practicality of this brief.
- 10 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (1) , 48-52
A Novel NN-Based Fast-Convergence Background Calibration for Timing Mismatch in TI ADCs
A novel background calibration technique for timing mismatch in time-interleaved ADCs (TI ADCs) with fast convergence speed is presented in this brief. The proposed calibration applies a customized neural network (NN) to extract the information of timing skews for compensation. Compared to the conventional background methods for calibrating timing mismatches without reference, this brief significantly increases the convergence speed with high accuracy. In comparison with prior NN-based calibration works, this brief could follow the error changes in the background and has stronger robustness, also without any risk of fidelity problem. A 12-bit 3GSps 4-channel TI ADC model with noise and jitter is simulated for verifying the effectiveness of this technique. Simulation results show that the proposed technique could improve the SNDR and SFDR by 7.41dB and 24.73dB respectively, with only 1536 samples for convergence. Off-chip validation with a 12-bit 3GSps 4-channel TI ADC also proves the effectiveness and practicality of this brief.
- 3 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 32 (7) , 1184-1194
A New Artificial Neural Network-Based Calibration Mechanism for ADCs: A Time-Interleaved ADC Case Study
This article presents a new artificial neural network (ANN)-based calibration mechanism for analog-to-digital converters (ADCs). The proposed mechanism applies ANN to realize the bijective vector recovery mapping (VRM) for nonlinearity calibration and thus effectively suppresses both harmonic distortions and spurs. A new ANN-based calibrator is designed to calibrate both single-channel nonlinearity and interchannel mismatches and significantly improve the performance of ADCs. Through signal-fitting-based training process and noise adding, the proposed mechanism and calibrator can calibrate the general nonlinearity and mismatches of ADCs, including but not limited to the typical nonideality that conventional calibration techniques commonly concern (such as interstage gain error, digital-to-analog converter (DAC) error, and timing mismatch). For verification, an on-chip ANN-based calibrator is implemented in a 12-bit 600-MS/s four-channel time-interleaved (TI) ADC prototype. The measurement results show that signal-to-noise-and-distortion ratio (SNDR) and spurious-free dynamic range (SFDR) are improved from 32.79 and 35.30 to 62.45 and 74.21 dB, respectively. Another off-chip ANN-based calibrator is applied to a commercial 12-bit 5.4-GS/s four-channel ADC, and the results show that the SNDR and SFDR are improved from 42.38 and 43.17 to 53.98 and 78.25 dB, respectively.
- 3 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 32 (7) , 1184-1194
A New Artificial Neural Network-Based Calibration Mechanism for ADCs: A Time-Interleaved ADC Case Study
This article presents a new artificial neural network (ANN)-based calibration mechanism for analog-to-digital converters (ADCs). The proposed mechanism applies ANN to realize the bijective vector recovery mapping (VRM) for nonlinearity calibration and thus effectively suppresses both harmonic distortions and spurs. A new ANN-based calibrator is designed to calibrate both single-channel nonlinearity and interchannel mismatches and significantly improve the performance of ADCs. Through signal-fitting-based training process and noise adding, the proposed mechanism and calibrator can calibrate the general nonlinearity and mismatches of ADCs, including but not limited to the typical nonideality that conventional calibration techniques commonly concern (such as interstage gain error, digital-to-analog converter (DAC) error, and timing mismatch). For verification, an on-chip ANN-based calibrator is implemented in a 12-bit 600-MS/s four-channel time-interleaved (TI) ADC prototype. The measurement results show that signal-to-noise-and-distortion ratio (SNDR) and spurious-free dynamic range (SFDR) are improved from 32.79 and 35.30 to 62.45 and 74.21 dB, respectively. Another off-chip ANN-based calibrator is applied to a commercial 12-bit 5.4-GS/s four-channel ADC, and the results show that the SNDR and SFDR are improved from 42.38 and 43.17 to 53.98 and 78.25 dB, respectively.
- 2 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 31 (6) , 887-891
A Novel Two-Stage Timing Mismatch Calibration Technique for Time-Interleaved ADCs
This brief proposes a timing mismatch calibration for time-interleaved analog-to-digital converters (TI ADCs) with the novel parallel correlation derivative (PCD) technique and two-stage analog–digital hybrid compensation. The PCD technique could solve the frequency-relevant problem caused by low correlation derivative in the precise skew calculation. Besides, the compensation scheme with an analog coarse correction and then the all-digital fine correction is used to cover a larger normalized skew range and bandwidth with maintained calibration performance. Compared to previous works on timing mismatch calibration, this work has improved accuracy with a larger effective bandwidth and a larger skew calibration range. The technique is applied in a four-channel 14-bit 3 GS/s ADC model to verify its effectiveness. Simulation results show that it increases the SNDR and SFDR from 31.02 and 32.87 to 54.40 and 93.49 dB at ${f}_{\text {in}}\,\,=\,\,0.99{f}_{s}$ and maintains good performance in the first three Nyquist bands.
- 2 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 31 (6) , 887-891
A Novel Two-Stage Timing Mismatch Calibration Technique for Time-Interleaved ADCs
This brief proposes a timing mismatch calibration for time-interleaved analog-to-digital converters (TI ADCs) with the novel parallel correlation derivative (PCD) technique and two-stage analog–digital hybrid compensation. The PCD technique could solve the frequency-relevant problem caused by low correlation derivative in the precise skew calculation. Besides, the compensation scheme with an analog coarse correction and then the all-digital fine correction is used to cover a larger normalized skew range and bandwidth with maintained calibration performance. Compared to previous works on timing mismatch calibration, this work has improved accuracy with a larger effective bandwidth and a larger skew calibration range. The technique is applied in a four-channel 14-bit 3 GS/s ADC model to verify its effectiveness. Simulation results show that it increases the SNDR and SFDR from 31.02 and 32.87 to 54.40 and 93.49 dB at ${f}_{\text {in}}\,\,=\,\,0.99{f}_{s}$ and maintains good performance in the first three Nyquist bands.
- 10 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 29 (8) , 1591-1595
A Timing Mismatch Background Calibration Algorithm With Improved Accuracy
This brief presents a novel timing mismatch background calibration algorithm for time-interleaved (TI) analog-to-digital converters (ADCs). It can calibrate an arbitrary number of channels with an arbitrary input frequency. It also increases the calibration accuracy by applying the autocorrelation functions with an expanded interval. Besides, the proposed algorithm effectively prevents the small derivative values in the correlation difference from degrading the skew estimation accuracy. Compared to prior works on calibration, this work has at least five times better detection accuracy when the frequency of the input signal is close to the Nyquist frequency. This is without the need for calculating the high-order statistics. Finally, we simulate a four-channel 12-bit TI ADC with non-ideal effects added. Simulation results show that the proposed algorithm increases the signal to noise-plus-distortion ratio (SNDR) and spurious-free dynamic range (SFDR) from 35.5 and 40.0 dB to 63.3 and 84.6 dB, respectively, when the input frequency is close to the Nyquist frequency.
- 10 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 29 (8) , 1591-1595
A Timing Mismatch Background Calibration Algorithm With Improved Accuracy
This brief presents a novel timing mismatch background calibration algorithm for time-interleaved (TI) analog-to-digital converters (ADCs). It can calibrate an arbitrary number of channels with an arbitrary input frequency. It also increases the calibration accuracy by applying the autocorrelation functions with an expanded interval. Besides, the proposed algorithm effectively prevents the small derivative values in the correlation difference from degrading the skew estimation accuracy. Compared to prior works on calibration, this work has at least five times better detection accuracy when the frequency of the input signal is close to the Nyquist frequency. This is without the need for calculating the high-order statistics. Finally, we simulate a four-channel 12-bit TI ADC with non-ideal effects added. Simulation results show that the proposed algorithm increases the signal to noise-plus-distortion ratio (SNDR) and spurious-free dynamic range (SFDR) from 35.5 and 40.0 dB to 63.3 and 84.6 dB, respectively, when the input frequency is close to the Nyquist frequency.