Zirun Li
Zirun Li has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Jin Xu
Key Laboratory of Control of Power Transmission and Conversion, Ministry of Education, Shanghai Jiao Tong University, Shanghai, China
10 shared publications - Keyou Wang
Shanghai Jiao Tong University
10 shared publications Guojie Li
Ministry of Education, Key Laboratory of Control of Power Transmission and Conversion, Shanghai Jiao Tong University, Shanghai, China
5 shared publicationsPan Wu
Ministry of Education, Key Laboratory of Control of Power Transmission and Conversion, Shanghai Jiao Tong University, Shanghai, China
4 shared publications- Pan Wu
Key Laboratory of Control of Power Transmission and Conversion, Ministry of Education, Shanghai Jiao Tong University, Shanghai, China
4 shared publications - Guojie Li
Key Laboratory of Control of Power Transmission and Conversion, Ministry of Education, Shanghai Jiao Tong University, Shanghai, China
3 shared publications
Latest Publications
- 31 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (10) , 10215-10226
Switching-Period-Synchronization-Based Real-Time Simulation Method Suitable for Power Converters With High Switching Frequency
The switching frequency of power electronic converters can be as high as hundreds of kilohertz in some cases. The time-step of the real-time simulation is generally suggested to be about one percent of the switching period to accurately locate the switch event. That brings great computation burden in unit time. To break this limitation, this article proposes a real-time simulation method based on the idea of switching period synchronization (SPS). The simulation time is synchronized with the reality time at an interval of the switching period, instead of the time-step. The switching period is adopted as the synchronization interval and also as the main time-step, which is further divided into several variable sub-time-steps determined by switch events within the switching period. To implement the proposed real-time simulation on the field-programmable gate array-based platform, an electromagnetic transient model in discrete-state-space form is proposed to simulate the circuit with the variable subtime-steps. The hardware-in-the-loop simulation of an on-board charger shows that the proposed method can realize the real-time simulation with a switching frequency of 200 kHz. The accuracy, efficiency, and applicability of the proposed method have been further validated.
- 31 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (10) , 10215-10226
Switching-Period-Synchronization-Based Real-Time Simulation Method Suitable for Power Converters With High Switching Frequency
The switching frequency of power electronic converters can be as high as hundreds of kilohertz in some cases. The time-step of the real-time simulation is generally suggested to be about one percent of the switching period to accurately locate the switch event. That brings great computation burden in unit time. To break this limitation, this article proposes a real-time simulation method based on the idea of switching period synchronization (SPS). The simulation time is synchronized with the reality time at an interval of the switching period, instead of the time-step. The switching period is adopted as the synchronization interval and also as the main time-step, which is further divided into several variable sub-time-steps determined by switch events within the switching period. To implement the proposed real-time simulation on the field-programmable gate array-based platform, an electromagnetic transient model in discrete-state-space form is proposed to simulate the circuit with the variable subtime-steps. The hardware-in-the-loop simulation of an on-board charger shows that the proposed method can realize the real-time simulation with a switching frequency of 200 kHz. The accuracy, efficiency, and applicability of the proposed method have been further validated.
- 15 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
- Vol. 6 (1) , 391-402
A Delay-Free Decoupling Method for FPGA-Based Real-Time Simulation of Power Electronic Systems
The decoupling method based on the natural or inserted artificial delays, when applied to the simulation of power electronic (PE) systems, may encounter challenges such as inadequate length of delay lines or numerical instability and precision issues due to the high-frequency voltage/current variations at interfaces. To deal with the challenge, a delay-free decoupling method is proposed in this article. The method reduces both the dimension of matrix multiplication and the number of switch state combinations without sacrificing numerical stability and compresses the calculation progress by representing the decoupled system with the discrete state-space equation. The PE system is decoupled at the series/parallel interface of submodules, treating currents as boundary variables linked to each submodule's extended port. A preliminary formula for these variables is derived by simultaneously solving nodal voltage equations and KVL equations. Submodule solutions are compacted and parallelized based on the discrete state-space equations. These equations are then substituted back and decomposing boundary variables into independent segments, to achieve parallelization of boundary variable solutions. The proposed method is validated through real-time simulation of cascaded PE systems on an FPGA platform with a 250ns time step. Results show that it achieves high precision compared to non-decoupled systems in PSCAD across diverse transient conditions. Additionally, it boosts the simulation scale by roughly 2-7 times on the FPGA-based platform compared to non-decoupled nodal analysis.
- 15 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
- Vol. 6 (1) , 391-402
A Delay-Free Decoupling Method for FPGA-Based Real-Time Simulation of Power Electronic Systems
The decoupling method based on the natural or inserted artificial delays, when applied to the simulation of power electronic (PE) systems, may encounter challenges such as inadequate length of delay lines or numerical instability and precision issues due to the high-frequency voltage/current variations at interfaces. To deal with the challenge, a delay-free decoupling method is proposed in this article. The method reduces both the dimension of matrix multiplication and the number of switch state combinations without sacrificing numerical stability and compresses the calculation progress by representing the decoupled system with the discrete state-space equation. The PE system is decoupled at the series/parallel interface of submodules, treating currents as boundary variables linked to each submodule's extended port. A preliminary formula for these variables is derived by simultaneously solving nodal voltage equations and KVL equations. Submodule solutions are compacted and parallelized based on the discrete state-space equations. These equations are then substituted back and decomposing boundary variables into independent segments, to achieve parallelization of boundary variable solutions. The proposed method is validated through real-time simulation of cascaded PE systems on an FPGA platform with a 250ns time step. Results show that it achieves high precision compared to non-decoupled systems in PSCAD across diverse transient conditions. Additionally, it boosts the simulation scale by roughly 2-7 times on the FPGA-based platform compared to non-decoupled nodal analysis.
- 20 December 2023
- Published by Elsevier in Composite Structures
- Vol. 330, 117828
Experimental study on the bonding performance of engineered cementitious composites to normal concrete interface subjected to salt freeze–thaw cycles
- 20 December 2023
- Published by Elsevier in Composite Structures
- Vol. 330, 117828
Experimental study on the bonding performance of engineered cementitious composites to normal concrete interface subjected to salt freeze–thaw cycles
- 29 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (12) , 14898-14917
Analysis and Evaluation of Modular Multilevel Converters for DC–DC Solid-State Transformer Based on Different Operating Conditions
In modular multilevel converter (MMC) based solid-state transformer (SST), the MMC dominates total volume and power loss. The loss and volume of MMC are influenced by various factors, such as operating frequencies, waveforms of ac-link voltage, numbers of submodules, as well as modulation methods. Their impacts on loss and volume of MMC have not been comprehensively analyzed and evaluated. To investigate and evaluate the loss and volume of MMC based on various operating conditions, the computational model is developed for MMC-SST according to its operational principles. The developed model considered the parameter design of MMC to determine the capacitance and arm inductance based on various operating conditions, which are essential parameters to solve state variables. Then, with the developed computational model, the methodology is developed to comprehensively evaluate the losses and volume of MMC-SST under various operating conditions, and to investigate the impacts of the above-mentioned factors. The proposed analysis and methodology serve as a guidance and basis for the future optimal design of MMC-SST by providing insights into its performance. The proposed model and analysis are verified by experimental results.
- 29 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (12) , 14898-14917
Analysis and Evaluation of Modular Multilevel Converters for DC–DC Solid-State Transformer Based on Different Operating Conditions
In modular multilevel converter (MMC) based solid-state transformer (SST), the MMC dominates total volume and power loss. The loss and volume of MMC are influenced by various factors, such as operating frequencies, waveforms of ac-link voltage, numbers of submodules, as well as modulation methods. Their impacts on loss and volume of MMC have not been comprehensively analyzed and evaluated. To investigate and evaluate the loss and volume of MMC based on various operating conditions, the computational model is developed for MMC-SST according to its operational principles. The developed model considered the parameter design of MMC to determine the capacitance and arm inductance based on various operating conditions, which are essential parameters to solve state variables. Then, with the developed computational model, the methodology is developed to comprehensively evaluate the losses and volume of MMC-SST under various operating conditions, and to investigate the impacts of the above-mentioned factors. The proposed analysis and methodology serve as a guidance and basis for the future optimal design of MMC-SST by providing insights into its performance. The proposed model and analysis are verified by experimental results.
- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 38 (6) , 4213-4225
Portal Analysis Approach Used for the Efficient Electromagnetic Transient (EMT) Simulation of Power Electronic Systems
Efficient electromagnetic transient (EMT) simulation is crucial for addressing the challenges associated with the modularity, cascading, and complex topologies of power electronics (PE) systems. This paper introduces a novel portal analysis (PA) approach that adopts a unique “port-component” view, leveraging the characteristics of “ports”. Different from the classic nodal analysis (NA) method, the networks and the components are described based on the portal voltage equations with lower orders. Furthermore, a port tearing method is introduced to partition the circuit, resulting in a block-bordered-diagonal (BBD) matrix and a small number of boundary variables in the extended port equation. The parallel processing of the network solution is implemented by utilizing the BBD forms and the band features. To validate the effectiveness of the proposed PA approach in capturing dynamics, a down-scale dual active bridge (DAB) prototype is constructed. Additionally, a simulated microgrid comprising cascaded H-bridge-type-DAB (CHB-DAB), solar photovoltaic (PV), and energy storage system (ESS) is used to furtherly verify the accuracy and efficiency. The results demonstrate that compared with the NA-based methods, the proposed models exhibit high precision under various transient conditions, with maximum relative errors of less than 2%. Moreover, they achieve a remarkable acceleration of one to two orders of magnitude.
- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 38 (6) , 4213-4225
Portal Analysis Approach Used for the Efficient Electromagnetic Transient (EMT) Simulation of Power Electronic Systems
Efficient electromagnetic transient (EMT) simulation is crucial for addressing the challenges associated with the modularity, cascading, and complex topologies of power electronics (PE) systems. This paper introduces a novel portal analysis (PA) approach that adopts a unique “port-component” view, leveraging the characteristics of “ports”. Different from the classic nodal analysis (NA) method, the networks and the components are described based on the portal voltage equations with lower orders. Furthermore, a port tearing method is introduced to partition the circuit, resulting in a block-bordered-diagonal (BBD) matrix and a small number of boundary variables in the extended port equation. The parallel processing of the network solution is implemented by utilizing the BBD forms and the band features. To validate the effectiveness of the proposed PA approach in capturing dynamics, a down-scale dual active bridge (DAB) prototype is constructed. Additionally, a simulated microgrid comprising cascaded H-bridge-type-DAB (CHB-DAB), solar photovoltaic (PV), and energy storage system (ESS) is used to furtherly verify the accuracy and efficiency. The results demonstrate that compared with the NA-based methods, the proposed models exhibit high precision under various transient conditions, with maximum relative errors of less than 2%. Moreover, they achieve a remarkable acceleration of one to two orders of magnitude.
- 12 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (11) , 11368-11378
Unified Real-Time Simulation Method for DC/DC Conversion Systems Consisting of Cascaded Dual-Port Submodules
The dc/dc conversion systems are constructed from multiple cascaded dual-port submodules in series and/or parallel at both the input port and output port. The complexity of the series-parallel structures brings great challenges to real-time simulation. This article proposes a unified real-time simulation method of series-parallel dc/dc conversion systems, which unifies the input-series-output-series, input-series-output-parallel, input-parallel-output-parallel, and input-parallel-output-series structures. First, based on the nodal analysis method, the dual-port equivalent model of each submodule in the series-parallel dc/dc conversion system is obtained. Second, by cascading each submodule, the unified form of the system's dual-port equivalent model of the series-parallel dc/dc conversion system is constructed. For the series connection, the port is equivalent to Thevenin's equivalent circuit. For the parallel connection, the port is equivalent to Norton's equivalent circuit. The real-time simulation model of a specific series-parallel dc/dc conversion system can be obtained by combining the input/output port equivalent circuits. Besides, the high-frequency waveforms of the internal circuit can also be obtained through parallel calculation steps. The real-time simulation of the proposed unified model is carried out with a 250-ns time step on a Xilinx K-7 series field-programmable gate array, which verifies the accuracy and simulation efficiency of the unified model.
- 12 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (11) , 11368-11378
Unified Real-Time Simulation Method for DC/DC Conversion Systems Consisting of Cascaded Dual-Port Submodules
The dc/dc conversion systems are constructed from multiple cascaded dual-port submodules in series and/or parallel at both the input port and output port. The complexity of the series-parallel structures brings great challenges to real-time simulation. This article proposes a unified real-time simulation method of series-parallel dc/dc conversion systems, which unifies the input-series-output-series, input-series-output-parallel, input-parallel-output-parallel, and input-parallel-output-series structures. First, based on the nodal analysis method, the dual-port equivalent model of each submodule in the series-parallel dc/dc conversion system is obtained. Second, by cascading each submodule, the unified form of the system's dual-port equivalent model of the series-parallel dc/dc conversion system is constructed. For the series connection, the port is equivalent to Thevenin's equivalent circuit. For the parallel connection, the port is equivalent to Norton's equivalent circuit. The real-time simulation model of a specific series-parallel dc/dc conversion system can be obtained by combining the input/output port equivalent circuits. Besides, the high-frequency waveforms of the internal circuit can also be obtained through parallel calculation steps. The real-time simulation of the proposed unified model is carried out with a 250-ns time step on a Xilinx K-7 series field-programmable gate array, which verifies the accuracy and simulation efficiency of the unified model.
- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (4) , 3847-3856
An FPGA-Based Hierarchical Parallel Real-Time Simulation Method for Cascaded Solid-State Transformer
The cascaded H-bridge (CHB)-based solid-state transformer (SST) is a core interface device for power conversion in the distribution network. However, the complicated structures and higher switching frequencies bring significant challenges to real-time simulation and hardware-in-loop (HIL) testing. This article proposes a field-programmable gate array (FPGA)-based hierarchical parallel real-time simulation method for cascaded SST, which mainly includes highly parallel solving at the operation level, module level, and system level. A dual-port equivalent model of the cascaded SST is constructed based on the hierarchical parallel real-time simulation method. A cascaded SST containing 42 modules (630 components) can be simulated on a single FPGA with a minimum of 400 ns time-step. The information of the ports of the equivalent model and the information of the internal nodes of the cascaded SST can be obtained, which is the same as the simulation of detailed model. The real-time simulation of cascaded SST with input-series-output-parallel (ISOP) structure is carried out on a Xilinx Kintex-7 FPGA. The simulation results show that the real-time simulation waveforms are almost consistent with those in PSCAD/EMTDC software package.
- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (4) , 3847-3856
An FPGA-Based Hierarchical Parallel Real-Time Simulation Method for Cascaded Solid-State Transformer
The cascaded H-bridge (CHB)-based solid-state transformer (SST) is a core interface device for power conversion in the distribution network. However, the complicated structures and higher switching frequencies bring significant challenges to real-time simulation and hardware-in-loop (HIL) testing. This article proposes a field-programmable gate array (FPGA)-based hierarchical parallel real-time simulation method for cascaded SST, which mainly includes highly parallel solving at the operation level, module level, and system level. A dual-port equivalent model of the cascaded SST is constructed based on the hierarchical parallel real-time simulation method. A cascaded SST containing 42 modules (630 components) can be simulated on a single FPGA with a minimum of 400 ns time-step. The information of the ports of the equivalent model and the information of the internal nodes of the cascaded SST can be obtained, which is the same as the simulation of detailed model. The real-time simulation of cascaded SST with input-series-output-parallel (ISOP) structure is carried out on a Xilinx Kintex-7 FPGA. The simulation results show that the real-time simulation waveforms are almost consistent with those in PSCAD/EMTDC software package.
- Open Access
- 11 January 2022
- Published by Institution of Engineering and Technology (IET) in IET Renewable Power Generation
- Vol. 17 (1) , 110-123
Parallel electromagnetic transient simulation of power systems with a high proportion of renewable energy based on latency insertion method
With the interconnection of regional grids and the increasing penetration of renewable energy, the order of the power system model is getting higher and higher, which brings great challenges to the accuracy and real‐time performance of electromagnetic transient (EMT) simulation. The simulation of power systems with a high proportion of renewable energy requires a sharp increase in the performance of the hardware platform and the parallelism of the simulation algorithm. To solve this problem, the paper proposes a fine‐grained parallel modelling method for power systems with a high proportion of renewable energy, which is inspired by the latency insertion method used in the design of large‐scale integrated circuits. And this method is implemented on GPU to achieve the component‐level and device‐level parallelized simulation of power systems with a high proportion of renewable energy. Finally, the correctness of the proposed algorithm and the CPU‐GPU cooperative architecture is verified based on an improved 118‐bus case. The cascade system of the improved 9‐bus case is used as an example to verify the superiority of the proposed algorithm in terms of simulation efficiency.
- 11 January 2022
- Published by Institution of Engineering and Technology (IET) in IET Renewable Power Generation
- Vol. 17 (1) , 110-123
Open AccessParallel electromagnetic transient simulation of power systems with a high proportion of renewable energy based on latency insertion method
With the interconnection of regional grids and the increasing penetration of renewable energy, the order of the power system model is getting higher and higher, which brings great challenges to the accuracy and real‐time performance of electromagnetic transient (EMT) simulation. The simulation of power systems with a high proportion of renewable energy requires a sharp increase in the performance of the hardware platform and the parallelism of the simulation algorithm. To solve this problem, the paper proposes a fine‐grained parallel modelling method for power systems with a high proportion of renewable energy, which is inspired by the latency insertion method used in the design of large‐scale integrated circuits. And this method is implemented on GPU to achieve the component‐level and device‐level parallelized simulation of power systems with a high proportion of renewable energy. Finally, the correctness of the proposed algorithm and the CPU‐GPU cooperative architecture is verified based on an improved 118‐bus case. The cascade system of the improved 9‐bus case is used as an example to verify the superiority of the proposed algorithm in terms of simulation efficiency.
- Open Access
- 8 January 2022
- Published by Institution of Engineering and Technology (IET) in IET Renewable Power Generation
- Vol. 17 (1) , 176-185
A fractional time‐step simulation method suitable for the associated discrete circuit model of power electronic system
The associated discrete circuit (ADC) model for switches is widely used in electromagnetic transient simulation of power electronic system. When using ADC model, the problem of virtual power loss caused by L/C switching cannot be ignored and small time‐step (≤2 μs) is usually required to guarantee accuracy, both of which will limit the application of ADC model. To cope with this, a fractional time‐step simulation method (FTSSM) suitable for the ADC model of power electronic system is proposed. The method is derived from the compact form of electro‐magnetic transient program (EMTP) algorithm, and the simulation iteration is implemented by small‐step synthesis calculation with different fractional time‐steps, which are designed to locate the accurate switching actions. In this way, the simulation can be conducted under larger time‐step (to tens of μs) while the accuracy is still acceptable. Further analysis on time domain error and numerical stability of the FTSSM are discussed. Simulations of grid‐connected inverter system and permanent magnet synchronous motor (PMSM) driving system are done, using FTSSM and on PSCAD respectively for comparison. The results verify the accuracy of proposed FTSSM, and indicate that the FTSSM is helpful to accelerate the offline simulation and improve the real‐time simulation performance.
- 8 January 2022
- Published by Institution of Engineering and Technology (IET) in IET Renewable Power Generation
- Vol. 17 (1) , 176-185
Open AccessA fractional time‐step simulation method suitable for the associated discrete circuit model of power electronic system
The associated discrete circuit (ADC) model for switches is widely used in electromagnetic transient simulation of power electronic system. When using ADC model, the problem of virtual power loss caused by L/C switching cannot be ignored and small time‐step (≤2 μs) is usually required to guarantee accuracy, both of which will limit the application of ADC model. To cope with this, a fractional time‐step simulation method (FTSSM) suitable for the ADC model of power electronic system is proposed. The method is derived from the compact form of electro‐magnetic transient program (EMTP) algorithm, and the simulation iteration is implemented by small‐step synthesis calculation with different fractional time‐steps, which are designed to locate the accurate switching actions. In this way, the simulation can be conducted under larger time‐step (to tens of μs) while the accuracy is still acceptable. Further analysis on time domain error and numerical stability of the FTSSM are discussed. Simulations of grid‐connected inverter system and permanent magnet synchronous motor (PMSM) driving system are done, using FTSSM and on PSCAD respectively for comparison. The results verify the accuracy of proposed FTSSM, and indicate that the FTSSM is helpful to accelerate the offline simulation and improve the real‐time simulation performance.
- 1 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 9 (4) , 4212-4224
FPGA-Based Submicrosecond-Level Real-Time Simulation of Solid-State Transformer With a Switching Frequency of 50 kHz
The switching frequency of power electronic devices has become much higher than before, which brings great challenges to real-time simulators. The small time-step in high switching frequency simulations remarkably increases the difficulty to satisfy the real-time requirement. This paper realizes the accurate real-time simulation of a solid-state transformer (SST) with a switching frequency of 50kHz at the time-step of 250ns on an FPGA-based platform. The hybrid companion circuit modeling method and the compact-EMTP (Electro-Magnetic Transient Program) algorithm are proposed in this paper to make sure the simulation loop can complete in less than one microsecond. The hybrid companion circuit modeling method can avoid too many digits used in representing simulation variables. The compact-EMTP algorithm is designed by combining the sequential computation tasks of the traditional EMTP to fully utilize the parallelized hardware structure of the FPGA. Besides, a circuit partition method is adopted to further parallelize the circuit solution of the SST circuit. In these ways, the simulation loop of the SST can be completed in 38 clock cycles (about 237.5ns). The simulation results show that the real-time simulation waveforms are almost consistent with those of the offline simulation software. Besides, the hardware-in-the-loop (HIL) simulation can also be performed on this platform to test the control functions of the SST.
- 1 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 9 (4) , 4212-4224
FPGA-Based Submicrosecond-Level Real-Time Simulation of Solid-State Transformer With a Switching Frequency of 50 kHz
The switching frequency of power electronic devices has become much higher than before, which brings great challenges to real-time simulators. The small time-step in high switching frequency simulations remarkably increases the difficulty to satisfy the real-time requirement. This paper realizes the accurate real-time simulation of a solid-state transformer (SST) with a switching frequency of 50kHz at the time-step of 250ns on an FPGA-based platform. The hybrid companion circuit modeling method and the compact-EMTP (Electro-Magnetic Transient Program) algorithm are proposed in this paper to make sure the simulation loop can complete in less than one microsecond. The hybrid companion circuit modeling method can avoid too many digits used in representing simulation variables. The compact-EMTP algorithm is designed by combining the sequential computation tasks of the traditional EMTP to fully utilize the parallelized hardware structure of the FPGA. Besides, a circuit partition method is adopted to further parallelize the circuit solution of the SST circuit. In these ways, the simulation loop of the SST can be completed in 38 clock cycles (about 237.5ns). The simulation results show that the real-time simulation waveforms are almost consistent with those of the offline simulation software. Besides, the hardware-in-the-loop (HIL) simulation can also be performed on this platform to test the control functions of the SST.