FYFan Yang

Fan Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Fan Yang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Analysis of Permanent Magnet Vernier Synchronous Machine Vibration and Noise

    by Fan Yang, Daolu Li, Yi Zhang, Lijing Wang, Bitian Ye, Fang Zhang

    The permanent magnet vernier synchronous machine (PMVSM) has the characteristics of high torque density and high power density and has advantages in the field of low-speed and high-torque applications. The PMVSM utilizes rich harmonics for torque enhancement, but it can also cause an increase in radial electromagnetic force and vibration noise. In this paper, we take a 12-slot 10-pole PMVSM as an example to analyze the source of radial electromagnetic force, vibration and noise. The electromagnetic finite-element model and structural finite-element model of the PMVSM are established for calculation. Through the analysis and calculation of two-dimensional electromagnetic fields, the radial electromagnetic force distribution of the PMVSM is obtained. We derive the radial electromagnetic force formula of the PMVSM and verify the correctness of the formula through harmonic analysis of the radial electromagnetic force. The sources of radial electromagnetic forces at various orders and frequencies within the PMVSM are analyzed and summarized by coupling the radial electromagnetic force obtained from the electromagnetic finite-element model to the structural finite-element model and conducting electromagnetic vibration harmonic response analysis on the PMVSM. The measured acceleration spectrum of the prototype is compared with the finite-element method (FEM) results, verifying the correctness of the finite-element simulation results for electromagnetic vibration.

  • Open Access

    A Novel Error-Correcting Particle Swarm Optimization Back Propagation Fault Diagnosis Method for Microgrid

    by Lijing Wang, Fan Yang, Fengxia Xu, Zifei Wang, Jiwei Li, Wenjing Yao

    Compared to traditional power grids, microgrids have a more flexible operating mode. There are various distributed power sources within the microgrid, and different types of distributed power sources have different control methods. Once a short-circuit fault occurs in the microgrid, these characteristics will increase the difficulty of microgrid fault diagnosis and reduce the accuracy of microgrid fault diagnosis. This paper proposes an error-correcting particle swarm optimization back propagation microgrid fault diagnosis method for the diagnosis of short-circuit faults in microgrids that identifies the accuracy of alarm signals, corrects unreasonable signals, and obtains the correct fault set of the microgrid through the temporal logic relationship between each protection. Using the particle swarm optimization back propagation (PSO-BP) neural network algorithm to train fault alarm signals, fast convergence can be achieved, and accurate diagnostic results can be obtained after the sixth generation training is completed. As this fault diagnosis algorithm is applied to line protection equipment, it can be used to diagnose all types of short-circuit faults. This algorithm is easy to implement and has a small data scale, which is conducive to efficient and concise fault diagnoses in microgrids.


  • The Magnetic Field Analytical Calculation of Permanent Magnet Vernier Synchronous Machine With Saddle-Shaped Permanent Magnets

    by Fan Yang, Ying Xie, Wei Cai, Lijing Wang, Bitian Ye, Shoucong He, Jiawei Shao

    This article proposes a novel permanent magnet Vernier synchronous machine (PMVSM) with saddle-shaped PMs. The torque of the PMVSM with saddle-shaped PMs is increased by 35.4% and 45.6% compared with the PMVSM with V-shaped PMs and tile-shaped PMs, respectively. The torque ripple of the PMVSM with saddle-shaped PMs is reduced by 0.1% and 1.7% compared with the PMVSM with V-shaped PMs and tile-shaped PMs, respectively. To facilitate the analysis, the saddle-shaped PMs are equivalently transformed to the fan-shaped PMs, which ensures that the pole arc angles and air-gap magnetic flux are unchanged. The rotor flux saturation region is modeled to improve the analytical calculation accuracy. The Laplace and Poisson equations are established for each part of the machine, the general solutions of the respective parts are solved, and the boundary conditions and intersection conditions are utilized to solve the factors. Compared with the finite-element method (FEM) results, the torque difference is $0.32~ \mathrm {N}\cdot \mathrm {m}$ , and the torque ripple difference is 0.2%. The correctness of the analytical calculation is verified by comparing with the FEM results. The auxiliary slot angle and slot depth can be optimized, resulting in a higher torque and a lower torque ripple.


  • Open Access

    Novel PM-Assisted Synchronous Reluctance Machines Using Asymmetrical Rotor Configuration

    by Ying Xie, Jiawei Shao, Shoucong He, Bitian Ye, Fan Yang, Lijing Wang

    This paper proposes a novel asymmetrical permanent magnet assisted synchronous reluctance machine (APMA-SynRM) with high cost performance, namely it has the advantages of high torque performance and low cost. This machine has an asymmetrical rotor configuration featured by low-cost ferrite and expensive NdFeB, and two kinds of material are placed asymmetrically on both sides of the “U”-shaped barriers, which causes the magnet-axis-shift (MAS) effect. Consequently, the proposed APMA-SynRM improves the utilization of the reluctance torque and permanent magnet torque. The influences of permanent magnet volume ratio and hybrid permanent magnet on torque performance are further investigated, and the optimal topologies are designed through a multi-objective genetic algorithm. Moreover, the machine performance of APMA-SynRM is analyzed and compared with that of the conventional permanent magnet assisted synchronous reluctance machine (PMA-SynRM), which confirms that the proposed APMA-SynRM can reduce the cost of permanent magnets but still achieve similar torque and wider constant power speed range performance.


  • Open Access

    Design and Research of a Dual Rotor Consequent-Pole Vernier Motor With Halbach Array

    by Ying Xie, Shoucong He, Jiawei Shao, Bitian Ye, Fan Yang, Lijing Wang

    Aiming at improving the torque density of the motor and the utilization rate of permanent magnets (PMs), a dual rotor consequent-pole vernier motor (DRCPVM) is proposed in this article. The stator of the motor has a double-sided structure with two sets of independent windings on each side. Therefore, the proposed motor has different working modes according to the on/off state of the two sets of windings. In the design process, DRCPVM is used as a basic model and optimization is performed on it. The optimization includes the slot width and height of the stator teeth and the radian ratio occupied by the PMs. Moreover, the Halbach array is introduced into the consequent-pole structure to establish the dual rotor consequent-pole vernier motor with Halbach array (DRCPVM-HA). Halbach array reduces flux leakage and improves the magnetic circuit. And Halbach array is employed to discuss the design of the magnetization angle. The rule of the electromagnetic performance changing with the magnetization angle is studied to find the optimal magnetization angle in the Halbach array. When the magnetization angle is 45° in DRCPVM-HA, the torque is significantly improved, the torque ripple is reduced, and the utilization rate of PMs is improved.


  • The Magnetic Field Analytical Calculation in a Novel Double Air-Gaps Permanent Magnet Vernier Synchronous Motor

    by Fan Yang, Ying Xie, Wei Cai

    A novel double air-gaps permanent magnet vernier synchronous motor (PMVSM) is proposed in this article. Because of the unique slotted structure of the outer stator, the motor has the characteristics of low speed and large torque. The rotating magnetic field of the inner and outer double air gaps simultaneously drags the rotor to move. The parameterized outer stator slotted double air-gaps PMVSM has a 22.5% higher torque than the same structure single air-gap motor. Use a magnetic field analytical calculation to analyze the motor. By establishing the Laplace and Poisson equations, the general solution and the relevant coefficients in the analytical solution of each part of the motor are solved. The parametric study of the outer stator slot angle γ and the inner stator notch angle β increases the torque and reduces the torque ripple. The comparison between the analytical calculation results and the finite-element method (FEM) results confirms the effectiveness of the magnetic field analytical calculation and parametric study.