Philipp Weber
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Philipp Weber has a total of 219 co-authors. Here are the top co-authors by number of shared publications:
- Sebastián Pérez
Universidad de santiago de Chile
21 shared publications - Agnes Kospal
HUN-REN Research Centre for Astronomy and Earth Sciences
12 shared publications - Sebastian Marino
University of Exeter
12 shared publications - John M. Carpenter
Joint Atacama Large Millimeter/submillimeter Array Observatory
11 shared publications - A. Meredith Hughes
Wesleyan University
10 shared publications - Alice Zurlo
Instituto de Estudios Astrofísicos, Facultad de Ingeniería y Ciencias, Universidad Diego Portales
10 shared publications
Latest Publications
- Open Access
- 8 April 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 708, A194
Warps survive beyond fly-by encounters in protoplanetary disks
Aims. Stellar fly-bys can have multiple dynamical effects on protoplanetary disks, including warping and the excitation of spiral arms. Since observations indicate that warps are common, we aim to investigate these effects for different fly-by trajectories. We further link our models to observations by applying them to the RW Aur system, which is a fly-by candidate with a well-constrained trajectory. Methods. We investigated the disk dynamics in grid-based hydrodynamical simulations, which allow for a lower disk viscosity than in commonly used smoothed particle hydrodynamics models. We post-processed our simulations of the RW Aur system with radiative transfer models to create synthetic images of the dust continuum and gas kinematics. Results. Fly-bys inclined with respect to the original disk plane can excite warps of a few degrees, but the exact outcome depends on the specific geometry of the encounter. Specifically, we find that the position of the periastron with respect to the initial disk plane plays a role in the resulting warp strength. Within our parameter set, the strongest warp is excited for a retrograde fly-by with a periastron that is not in the same plane as the disk. Our models show that the warp can persist even after the perturber can no longer be clearly linked to the system, implying that past fly-bys are a possible origin of observed warps. Excited spirals arms, on the other hand, are much more short-lived than a warp. We performed a simulation of the recent close encounter in the observed disk around RW Aur A, one of the few systems with a well-constrained trajectory. We find that a warp of about 5° can be excited and that the strong spiral arms have already disappeared at the current time of observation (300 yr after periastron). This compares well with existing continuum observations, and our synthetic kinematic evaluations hint at remnant structures in the gas density that may be detectable.
- 8 April 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 708, A194
Open AccessWarps survive beyond fly-by encounters in protoplanetary disks
Aims. Stellar fly-bys can have multiple dynamical effects on protoplanetary disks, including warping and the excitation of spiral arms. Since observations indicate that warps are common, we aim to investigate these effects for different fly-by trajectories. We further link our models to observations by applying them to the RW Aur system, which is a fly-by candidate with a well-constrained trajectory. Methods. We investigated the disk dynamics in grid-based hydrodynamical simulations, which allow for a lower disk viscosity than in commonly used smoothed particle hydrodynamics models. We post-processed our simulations of the RW Aur system with radiative transfer models to create synthetic images of the dust continuum and gas kinematics. Results. Fly-bys inclined with respect to the original disk plane can excite warps of a few degrees, but the exact outcome depends on the specific geometry of the encounter. Specifically, we find that the position of the periastron with respect to the initial disk plane plays a role in the resulting warp strength. Within our parameter set, the strongest warp is excited for a retrograde fly-by with a periastron that is not in the same plane as the disk. Our models show that the warp can persist even after the perturber can no longer be clearly linked to the system, implying that past fly-bys are a possible origin of observed warps. Excited spirals arms, on the other hand, are much more short-lived than a warp. We performed a simulation of the recent close encounter in the observed disk around RW Aur A, one of the few systems with a well-constrained trajectory. We find that a warp of about 5° can be excited and that the strong spiral arms have already disappeared at the current time of observation (300 yr after periastron). This compares well with existing continuum observations, and our synthetic kinematic evaluations hint at remnant structures in the gas density that may be detectable.
- Open Access
- 1 April 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 708, A95
ALMA 873 µm polarization observations of the PDS 70 disk
At a 112.4 pc distance, the PDS 70 protoplanetary disk is a rare case that has been confirmed to host two accreting planets. This makes it the most important laboratory for studying dust growth in the context of planet formation. Here we present the first deep full polarization observations at a wavelength of 873 µm. We detected ∼1–2.5% linear polarization over the bulk of the ~55–100 AU (sub)millimeter ring. The polarization position angles align preferentially with the projected minor axis of the disk. The standard interpretation is that the observed polarization is caused by dust self-scattering, with a maximum dust grain size of ~100 µm. On ≳10 AU scales, which can be resolved by the presented 873–3075 µm observations, the ring is marginally optically thick at the 873 µm wavelength. Using Monte Carlo radiative transfer simulations, we found that an azimuthally asymmetric, marginally optically thick ring with a maximum dust grain size of ∼87 µm can reproduce the observed 873 µm polarization position angles and percentages. This study indicates that the coagulation of ice-coated dust in the protoplanetary disk may be limited by fragmentation or bouncing.
- 1 April 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 708, A95
Open AccessALMA 873 µm polarization observations of the PDS 70 disk
At a 112.4 pc distance, the PDS 70 protoplanetary disk is a rare case that has been confirmed to host two accreting planets. This makes it the most important laboratory for studying dust growth in the context of planet formation. Here we present the first deep full polarization observations at a wavelength of 873 µm. We detected ∼1–2.5% linear polarization over the bulk of the ~55–100 AU (sub)millimeter ring. The polarization position angles align preferentially with the projected minor axis of the disk. The standard interpretation is that the observed polarization is caused by dust self-scattering, with a maximum dust grain size of ~100 µm. On ≳10 AU scales, which can be resolved by the presented 873–3075 µm observations, the ring is marginally optically thick at the 873 µm wavelength. Using Monte Carlo radiative transfer simulations, we found that an azimuthally asymmetric, marginally optically thick ring with a maximum dust grain size of ∼87 µm can reproduce the observed 873 µm polarization position angles and percentages. This study indicates that the coagulation of ice-coated dust in the protoplanetary disk may be limited by fragmentation or bouncing.
- Top Cited PapersOpen Access
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A196
The ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . Debris discs are populated by belts of planetesimals, whose structure carries dynamical imprints of planets and the formation and evolutionary history of the planetary system. The relatively faint emission of debris discs has previously made it challenging to obtain a large sample of high-resolution ALMA images to characterise their substructures. Aims . The ALMA survey to Resolve exoKuiper belt Substructures (ARKS) was recently completed to cover the lack of high-resolution observations and to investigate the prevalence of substructures such as radial gaps and rings in a sample of 24 debris discs. This study characterises the radial structure of debris discs in the ARKS programme. Methods . We modelled all discs with a range of non-parametric and parametric approaches, including those that deconvolve and deproject the image or fit the visibilities directly, in order to identify and quantify the disc substructures. Results . Across the sample we find that of the 24 discs, 5 host multiple rings, 7 are single rings that display halos or additional low-amplitude rings, and 12 are single rings with at most tentative evidence of additional substructures. The fractional ring widths that we measured are significantly narrower than previously derived values, and they follow a distribution similar to the fractional widths of individual rings resolved in protoplanetary discs. However, there exists a population of rings in debris discs that are significantly wider than those in protoplanetary discs. We also find that discs with steep inner edges consistent with planet sculpting tend to be found at smaller (Conclusions . While our findings suggest that it may be possible for some debris discs to inherit their structures directly from pro-toplanetary discs, there exists a sizeable population of broad debris discs that cannot be explained in this way. Assuming that the distribution of millimetre dust reflects the distribution of planetesimals, mechanisms that cause rings in protoplanetary discs to migrate or debris discs to broaden soon after formation may be at play, possibly mediated by planetary migration or scattering.
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A196
Top Cited PapersOpen AccessThe ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . Debris discs are populated by belts of planetesimals, whose structure carries dynamical imprints of planets and the formation and evolutionary history of the planetary system. The relatively faint emission of debris discs has previously made it challenging to obtain a large sample of high-resolution ALMA images to characterise their substructures. Aims . The ALMA survey to Resolve exoKuiper belt Substructures (ARKS) was recently completed to cover the lack of high-resolution observations and to investigate the prevalence of substructures such as radial gaps and rings in a sample of 24 debris discs. This study characterises the radial structure of debris discs in the ARKS programme. Methods . We modelled all discs with a range of non-parametric and parametric approaches, including those that deconvolve and deproject the image or fit the visibilities directly, in order to identify and quantify the disc substructures. Results . Across the sample we find that of the 24 discs, 5 host multiple rings, 7 are single rings that display halos or additional low-amplitude rings, and 12 are single rings with at most tentative evidence of additional substructures. The fractional ring widths that we measured are significantly narrower than previously derived values, and they follow a distribution similar to the fractional widths of individual rings resolved in protoplanetary discs. However, there exists a population of rings in debris discs that are significantly wider than those in protoplanetary discs. We also find that discs with steep inner edges consistent with planet sculpting tend to be found at smaller (Conclusions . While our findings suggest that it may be possible for some debris discs to inherit their structures directly from pro-toplanetary discs, there exists a sizeable population of broad debris discs that cannot be explained in this way. Assuming that the distribution of millimetre dust reflects the distribution of planetesimals, mechanisms that cause rings in protoplanetary discs to migrate or debris discs to broaden soon after formation may be at play, possibly mediated by planetary migration or scattering.
- Open Access
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A199
The ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . Debris discs are analogues to our own Kuiper belt around main-sequence stars and are therefore referred to as exoKuiper belts. They have been resolved at high angular resolution at wavelengths spanning the optical/near-infrared to the submillimetre-millimetre regime. Short wavelengths can probe the light scattered by such discs, which is dominated by micron-sized dust particles, while millimetre wavelengths can probe the thermal emission of millimetre-sized particles. Determining differences in the dust distribution between millimetre- and micron-sized dust is fundamental to revealing the dynamical processes affecting the dust in debris discs. Aims . We aim to compare the scattered light from the discs of the ‘ALMA survey to Resolve exoKuiper belt Substructures’ (ARKS) with the thermal emission probed by ALMA. We focus on the radial distribution of the dust, and we also put constraints on the presence of giant planets in those systems. Methods . We used high-contrast scattered light observations obtained with VLT/SPHERE, GPI, and the HST to uniformly study the dust distribution in those systems and compare it to the dust distribution extracted from the ALMA observations carried out in the course of the ARKS project. We also set constraints on the presence of planets by using these high-contrast images combined with exoplanet evolutionary models. Results . Fifteen of the 24 discs comprising the ARKS sample are detected in scattered light, with TYC 9340-437-1 being imaged for the first time at near-infrared wavelengths. For six of those 15 discs, the dust surface density seen in scattered light peaks farther out compared to that observed with ALMA. These six discs except one are known to also host cold CO gas. Conversely, the systems without significant offsets are not known to host gas, except one. Moreover, with our scattered light near-infrared images, we achieve typical sensitivities to planets from 1 to 10 M Jup beyond 10 to 20 au, depending on the system age and distance. Conclusions . This observational study suggests that the presence of gas in debris discs may affect the small and large grains differently, pushing the small dust to greater distances where the gas is less abundant.
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A199
Open AccessThe ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . Debris discs are analogues to our own Kuiper belt around main-sequence stars and are therefore referred to as exoKuiper belts. They have been resolved at high angular resolution at wavelengths spanning the optical/near-infrared to the submillimetre-millimetre regime. Short wavelengths can probe the light scattered by such discs, which is dominated by micron-sized dust particles, while millimetre wavelengths can probe the thermal emission of millimetre-sized particles. Determining differences in the dust distribution between millimetre- and micron-sized dust is fundamental to revealing the dynamical processes affecting the dust in debris discs. Aims . We aim to compare the scattered light from the discs of the ‘ALMA survey to Resolve exoKuiper belt Substructures’ (ARKS) with the thermal emission probed by ALMA. We focus on the radial distribution of the dust, and we also put constraints on the presence of giant planets in those systems. Methods . We used high-contrast scattered light observations obtained with VLT/SPHERE, GPI, and the HST to uniformly study the dust distribution in those systems and compare it to the dust distribution extracted from the ALMA observations carried out in the course of the ARKS project. We also set constraints on the presence of planets by using these high-contrast images combined with exoplanet evolutionary models. Results . Fifteen of the 24 discs comprising the ARKS sample are detected in scattered light, with TYC 9340-437-1 being imaged for the first time at near-infrared wavelengths. For six of those 15 discs, the dust surface density seen in scattered light peaks farther out compared to that observed with ALMA. These six discs except one are known to also host cold CO gas. Conversely, the systems without significant offsets are not known to host gas, except one. Moreover, with our scattered light near-infrared images, we achieve typical sensitivities to planets from 1 to 10 M Jup beyond 10 to 20 au, depending on the system age and distance. Conclusions . This observational study suggests that the presence of gas in debris discs may affect the small and large grains differently, pushing the small dust to greater distances where the gas is less abundant.
- Open Access
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A202
The ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . ExoKuiper belts around young A-type stars often host CO gas, whose origin is still unclear. The ALMA survey to Resolve exoKuiper belt Substructures (ARKS) includes six of these gas-bearing belts, to characterise their dust and gas distributions and investigate the gas origin. Aims . As part of ARKS, we observed the gas-rich system HD 121617 with a 0 ⋅ ′′ 12 (14 au) resolution and discovered an arc of enhanced dust density. In this paper, we analyse in detail the dust and gas distributions and the gas kinematics of this system. Methods . We extracted radial and azimuthal profiles of the dust (in the millimetre and near-infrared) and gas emission ( 12 CO and 13 CO) from reconstructed images. To constrain the morphology of the arc, we fitted an asymmetric model to the dust emission. To characterise the gas kinematics, we fitted a Keplerian model to the velocity map and extracted the gas azimuthal velocity profile by deprojecting the data. Results . We find that the dust arc is narrow (1–5 au wide at a radius of 75 au), azimuthally extended with a full width at half maximum of ~90°, and asymmetric; the emission is more azimuthally compact in the direction of the system’s rotation, and represents 13% of the total dust mass (0.2 M ⊕ ). From analysis of the scattered light and CO images, we conclude that the arc is much less pronounced or absent for small grains and gas. Finally, we find strong non-Keplerian azimuthal velocities at the inner and outer wings of the ring, as was expected due to strong pressure gradients. Conclusions . The dust arc resembles the asymmetries found in protoplanetary discs, often interpreted as the result of dust trapping in vortices. If the gas disc mass is high enough (≳20 M ⊕ , requiring a primordial gas origin), both the radial confinement of the ring and the azimuthal arc may result from dust grains responding to gas drag. Alternatively, it could result from planet-disc interactions via mean motion resonances. Further studies should test these hypotheses and may provide a dynamical gas mass estimate in this CO-rich exoKuiper belt.
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A202
Open AccessThe ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . ExoKuiper belts around young A-type stars often host CO gas, whose origin is still unclear. The ALMA survey to Resolve exoKuiper belt Substructures (ARKS) includes six of these gas-bearing belts, to characterise their dust and gas distributions and investigate the gas origin. Aims . As part of ARKS, we observed the gas-rich system HD 121617 with a 0 ⋅ ′′ 12 (14 au) resolution and discovered an arc of enhanced dust density. In this paper, we analyse in detail the dust and gas distributions and the gas kinematics of this system. Methods . We extracted radial and azimuthal profiles of the dust (in the millimetre and near-infrared) and gas emission ( 12 CO and 13 CO) from reconstructed images. To constrain the morphology of the arc, we fitted an asymmetric model to the dust emission. To characterise the gas kinematics, we fitted a Keplerian model to the velocity map and extracted the gas azimuthal velocity profile by deprojecting the data. Results . We find that the dust arc is narrow (1–5 au wide at a radius of 75 au), azimuthally extended with a full width at half maximum of ~90°, and asymmetric; the emission is more azimuthally compact in the direction of the system’s rotation, and represents 13% of the total dust mass (0.2 M ⊕ ). From analysis of the scattered light and CO images, we conclude that the arc is much less pronounced or absent for small grains and gas. Finally, we find strong non-Keplerian azimuthal velocities at the inner and outer wings of the ring, as was expected due to strong pressure gradients. Conclusions . The dust arc resembles the asymmetries found in protoplanetary discs, often interpreted as the result of dust trapping in vortices. If the gas disc mass is high enough (≳20 M ⊕ , requiring a primordial gas origin), both the radial confinement of the ring and the azimuthal arc may result from dust grains responding to gas drag. Alternatively, it could result from planet-disc interactions via mean motion resonances. Further studies should test these hypotheses and may provide a dynamical gas mass estimate in this CO-rich exoKuiper belt.
- Open Access
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A197
The ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . Debris disks – collisionally sustained belts of dust and sometimes gas around main sequence stars – are remnants of planet formation processes and are found in systems ≳10 Myr old. Millimeter-wavelength observations are particularly important, as the grains probed by these observations are not strongly affected by radiation pressure and stellar winds, allowing them to probe the dynamics of large bodies producing dust. The ALMA survey to Resolve exoKuiper belt Substructures (ARKS) is analyzing high-resolution observations of 24 debris disks to enable the characterization of debris disk substructures across a large sample for the first time. Aims . For the most highly inclined disks, it is possible to recover the vertical structure of the disk. We aim to model and analyze the most highly inclined systems in the ARKS sample in order to uniformly extract the vertical dust distributions for a sample of well-resolved debris disks. Methods . We employed both parametric and nonparametric methods to constrain the vertical dust distributions for the most highly inclined ARKS targets. Results . We find a broad range of aspect ratios, revealing a wide diversity in vertical structure, with a range of best-fit parametric values of 0.0026 ≤ h HWHM ≤ 0.193 and a median best-fit value of h HWHM = 0.021. The results obtained by nonparametric modeling are generally consistent with the parametric modeling results. We find that five of the 13 disks are consistent with having total disk masses less than that of Neptune (17 M ⊕ ), assuming stirring by internal processes (self-stirring and collisional and frictional damping). Furthermore, most systems show a significant preference for a Lorentzian vertical profile rather than a Gaussian.
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A197
Open AccessThe ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . Debris disks – collisionally sustained belts of dust and sometimes gas around main sequence stars – are remnants of planet formation processes and are found in systems ≳10 Myr old. Millimeter-wavelength observations are particularly important, as the grains probed by these observations are not strongly affected by radiation pressure and stellar winds, allowing them to probe the dynamics of large bodies producing dust. The ALMA survey to Resolve exoKuiper belt Substructures (ARKS) is analyzing high-resolution observations of 24 debris disks to enable the characterization of debris disk substructures across a large sample for the first time. Aims . For the most highly inclined disks, it is possible to recover the vertical structure of the disk. We aim to model and analyze the most highly inclined systems in the ARKS sample in order to uniformly extract the vertical dust distributions for a sample of well-resolved debris disks. Methods . We employed both parametric and nonparametric methods to constrain the vertical dust distributions for the most highly inclined ARKS targets. Results . We find a broad range of aspect ratios, revealing a wide diversity in vertical structure, with a range of best-fit parametric values of 0.0026 ≤ h HWHM ≤ 0.193 and a median best-fit value of h HWHM = 0.021. The results obtained by nonparametric modeling are generally consistent with the parametric modeling results. We find that five of the 13 disks are consistent with having total disk masses less than that of Neptune (17 M ⊕ ), assuming stirring by internal processes (self-stirring and collisional and frictional damping). Furthermore, most systems show a significant preference for a Lorentzian vertical profile rather than a Gaussian.
- Open Access
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A204
The ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . Dusty discs detected around main-sequence stars are thought to be signs of planetesimal belts in which the dust distribution is shaped by collisional and dynamical processes, including interactions with gas if present. The debris disc around the young A-type star HD 131835 is composed of two dust rings at ∼65 au and ∼100 au, a third unconstrained innermost component, and a gaseous component centred at ∼65 au. New ALMA observations show that the inner of the two dust rings is brighter than the outer one, in contrast with previous observations in scattered light. Aims . We explore two scenarios that could explain these observations: the two dust rings might represent distinct planetesimal belts with different collisional properties, or only the inner ring might contain planetesimals while the outer ring consists entirely of dust that has migrated outwards due to gas drag. Methods . To explore the first scenario, we employed a state-of-the-art collisional evolution code. To test the second scenario, we used a simple dynamical model of dust grain evolution in an optically thin gaseous disc. In each case we identified the parameters of the planetesimal and the gaseous disc that best reproduce the observational constraints. Results . Collisional models of two planetesimal belts cannot fully reproduce the observations by only varying their dynamical excitation, and matching the data through a different material strength requires an extreme difference in dust composition. The gas-driven scenario can reproduce the location of the outer ring and the brightness ratio of the two rings from scattered light observations, but the resulting outer ring is too faint overall in both scattered light and sub-millimetre emission. Conclusions . The dust rings in HD 131835 could be produced from two planetesimal belts, although how these belts would attain the required extremely different properties needs to be explained. The dust-gas interaction is a plausible alternative explanation and deserves further study using a more comprehensive model.
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A204
Open AccessThe ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . Dusty discs detected around main-sequence stars are thought to be signs of planetesimal belts in which the dust distribution is shaped by collisional and dynamical processes, including interactions with gas if present. The debris disc around the young A-type star HD 131835 is composed of two dust rings at ∼65 au and ∼100 au, a third unconstrained innermost component, and a gaseous component centred at ∼65 au. New ALMA observations show that the inner of the two dust rings is brighter than the outer one, in contrast with previous observations in scattered light. Aims . We explore two scenarios that could explain these observations: the two dust rings might represent distinct planetesimal belts with different collisional properties, or only the inner ring might contain planetesimals while the outer ring consists entirely of dust that has migrated outwards due to gas drag. Methods . To explore the first scenario, we employed a state-of-the-art collisional evolution code. To test the second scenario, we used a simple dynamical model of dust grain evolution in an optically thin gaseous disc. In each case we identified the parameters of the planetesimal and the gaseous disc that best reproduce the observational constraints. Results . Collisional models of two planetesimal belts cannot fully reproduce the observations by only varying their dynamical excitation, and matching the data through a different material strength requires an extreme difference in dust composition. The gas-driven scenario can reproduce the location of the outer ring and the brightness ratio of the two rings from scattered light observations, but the resulting outer ring is too faint overall in both scattered light and sub-millimetre emission. Conclusions . The dust rings in HD 131835 could be produced from two planetesimal belts, although how these belts would attain the required extremely different properties needs to be explained. The dust-gas interaction is a plausible alternative explanation and deserves further study using a more comprehensive model.
- Top Cited PapersOpen Access
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A195
The ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . The outer regions of planetary systems host dusty debris discs analogous to the Kuiper belt (exoKuiper belts), which provide crucial constraints on planet formation and evolution processes. ALMA dust observations have revealed a great diversity in terms of radii, widths, and scale heights. At the same time, ALMA has also shown that some belts contain CO gas, whose origin and implications are still highly uncertain. Most of this progress, however, has been limited by low angular resolution observations that hinder our ability to test existing models and theories. Aims . High-resolution observations of these belts are crucial for understanding the detailed distribution of solids and for constraining the gas distribution and kinematics. Methods . We conducted the first ALMA large programme dedicated to debris discs: the ALMA survey to Resolve exoKuiper belt Substructures (ARKS). We selected the 24 most promising belts to best address our main objectives: analysing the detailed radial and vertical structure, and characterising the gas content. The data were reduced and corrected to account for several systematic effects, and then imaged. Using parametric and non-parametric models, we constrained the radial and vertical distribution of dust, as well as the presence of asymmetries. For a subset of six belts with CO gas, we constrained the gas distribution and kinematics. To interpret these observations, we used a wide range of dynamical models. Results . The first results of ARKS are presented as a series of ten papers. We discovered that up to 33% of our sample exhibits substructures in the form of multiple dusty rings that may have been inherited from their protoplanetary discs. For highly inclined belts, we found that non-Gaussian vertical distributions are common and could be indicative of multiple dynamical populations. Half of the derived scale heights are small enough to be consistent with self-stirring in low-mass belts ( M belt ≤ M Neptune ). We also found that 10 of the 24 belts present asymmetries in the form of density enhancements, eccentricities, or warps. We find that the CO gas is radially broader than the dust, but this could be an effect of optical depth. At least one system shows non-Keplerian kinematics due to strong pressure gradients, which may have triggered a vortex that trapped dust in an arc. Finally, we find evidence that the micron-sized grains may be affected by gas drag in gas-rich systems, pushing the small grains to wider orbits than the large grains. Conclusions . ARKS has revealed a great diversity of radial and vertical structures in exoKuiper belts that may arise when they are formed in protoplanetary discs or subsequently via interactions with planets and/or gas. We encourage the community to explore the reduced data and data products that we have made public through a dedicated website.
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A195
Top Cited PapersOpen AccessThe ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . The outer regions of planetary systems host dusty debris discs analogous to the Kuiper belt (exoKuiper belts), which provide crucial constraints on planet formation and evolution processes. ALMA dust observations have revealed a great diversity in terms of radii, widths, and scale heights. At the same time, ALMA has also shown that some belts contain CO gas, whose origin and implications are still highly uncertain. Most of this progress, however, has been limited by low angular resolution observations that hinder our ability to test existing models and theories. Aims . High-resolution observations of these belts are crucial for understanding the detailed distribution of solids and for constraining the gas distribution and kinematics. Methods . We conducted the first ALMA large programme dedicated to debris discs: the ALMA survey to Resolve exoKuiper belt Substructures (ARKS). We selected the 24 most promising belts to best address our main objectives: analysing the detailed radial and vertical structure, and characterising the gas content. The data were reduced and corrected to account for several systematic effects, and then imaged. Using parametric and non-parametric models, we constrained the radial and vertical distribution of dust, as well as the presence of asymmetries. For a subset of six belts with CO gas, we constrained the gas distribution and kinematics. To interpret these observations, we used a wide range of dynamical models. Results . The first results of ARKS are presented as a series of ten papers. We discovered that up to 33% of our sample exhibits substructures in the form of multiple dusty rings that may have been inherited from their protoplanetary discs. For highly inclined belts, we found that non-Gaussian vertical distributions are common and could be indicative of multiple dynamical populations. Half of the derived scale heights are small enough to be consistent with self-stirring in low-mass belts ( M belt ≤ M Neptune ). We also found that 10 of the 24 belts present asymmetries in the form of density enhancements, eccentricities, or warps. We find that the CO gas is radially broader than the dust, but this could be an effect of optical depth. At least one system shows non-Keplerian kinematics due to strong pressure gradients, which may have triggered a vortex that trapped dust in an arc. Finally, we find evidence that the micron-sized grains may be affected by gas drag in gas-rich systems, pushing the small grains to wider orbits than the large grains. Conclusions . ARKS has revealed a great diversity of radial and vertical structures in exoKuiper belts that may arise when they are formed in protoplanetary discs or subsequently via interactions with planets and/or gas. We encourage the community to explore the reduced data and data products that we have made public through a dedicated website.
- Open Access
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A203
The ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . Debris discs were long considered to be largely gas-free environments, where dynamical evolution is governed primarily by collisional fragmentation, gravitational stirring, and radiative forces. Recent detections of CO molecular line emission in debris discs demonstrate that gas is present, but its abundance and origin are still uncertain. The ALMA survey to Resolve exoKuiper belt Substructures (ARKS) observed both the gas and dust of several debris discs at high resolution and revealed a narrow ring of gas and dust in the disc HD 121617, with an asymmetric arc-like feature that is 40% brighter than the rest of the ring. Aims . An important open question is how representative the estimated CO masses are for the total gas mass in debris discs. We aim to constrain the total gas mass in HD 121617 using numerical models under the assumption that the dust arc is produced by hydrodynamical processes involving the gas. Methods . We used the hydrodynamical code Dusty FARGO-ADSG, in which dust is modelled as Lagrangian particles. We explored the effects of radiation pressure and dust feedback, as well as of varying the total gas mass on the dynamical evolution of the system. We compared these simulations with observations via radiative transfer calculations. Results . We find that an unstable gas ring can create a size-dependent radial and azimuthal dust trap. The total gas mass dictates the efficiency of particle trapping as a function of grain size. We find that two of our models, M gas =50 M ⊕ and M gas =5 M ⊕ , can simultaneously reproduce the observed arc in the ALMA band 7 continuum image and the radial outward offset of the VLT/SPHERE scattered light ring, driven by the combined effects of gas drag and radiation pressure. We further find a conservative lower limit of M gas >2.5 M ⊕ and a conservative upper limit of M gas M ⊕ . Conclusions . If the ALMA band 7 asymmetry is caused by gas drag, reconciling the required gas mass with the observed 12 CO emission suggests the presence of significant amounts of H 2 , consistent with the gas being primordial, that is, long-lived remnant material from the protoplanetary disc phase. In this scenario, HD 121617 would represent a hybrid disc, bridging the protoplanetary and debris disc stages. As an arc-shaped emission can alternatively be reproduced by a planet’s gravitational forcing, future observations are crucial to distinguish between these two scenarios.
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A203
Open AccessThe ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . Debris discs were long considered to be largely gas-free environments, where dynamical evolution is governed primarily by collisional fragmentation, gravitational stirring, and radiative forces. Recent detections of CO molecular line emission in debris discs demonstrate that gas is present, but its abundance and origin are still uncertain. The ALMA survey to Resolve exoKuiper belt Substructures (ARKS) observed both the gas and dust of several debris discs at high resolution and revealed a narrow ring of gas and dust in the disc HD 121617, with an asymmetric arc-like feature that is 40% brighter than the rest of the ring. Aims . An important open question is how representative the estimated CO masses are for the total gas mass in debris discs. We aim to constrain the total gas mass in HD 121617 using numerical models under the assumption that the dust arc is produced by hydrodynamical processes involving the gas. Methods . We used the hydrodynamical code Dusty FARGO-ADSG, in which dust is modelled as Lagrangian particles. We explored the effects of radiation pressure and dust feedback, as well as of varying the total gas mass on the dynamical evolution of the system. We compared these simulations with observations via radiative transfer calculations. Results . We find that an unstable gas ring can create a size-dependent radial and azimuthal dust trap. The total gas mass dictates the efficiency of particle trapping as a function of grain size. We find that two of our models, M gas =50 M ⊕ and M gas =5 M ⊕ , can simultaneously reproduce the observed arc in the ALMA band 7 continuum image and the radial outward offset of the VLT/SPHERE scattered light ring, driven by the combined effects of gas drag and radiation pressure. We further find a conservative lower limit of M gas >2.5 M ⊕ and a conservative upper limit of M gas M ⊕ . Conclusions . If the ALMA band 7 asymmetry is caused by gas drag, reconciling the required gas mass with the observed 12 CO emission suggests the presence of significant amounts of H 2 , consistent with the gas being primordial, that is, long-lived remnant material from the protoplanetary disc phase. In this scenario, HD 121617 would represent a hybrid disc, bridging the protoplanetary and debris disc stages. As an arc-shaped emission can alternatively be reproduced by a planet’s gravitational forcing, future observations are crucial to distinguish between these two scenarios.
- Open Access
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A201
The ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . CO gas has been detected in ~20 debris discs, typically classified as CO-poor or CO-rich. We present observations of the CO-rich HD 121617 debris disc as part of the ALMA survey to Resolve exoKuiper belt Substructures (ARKS). Aims . We model local CO line profiles in the HD 121617 debris disc to investigate optical depth, CO mass, and temperature. HD 121617 is a well-suited ARKS target due to its previously detected CO emission and moderate inclination, reducing the effect of Keplerian shear. Methods . Using high-resolution ALMA Band 7 observations of 12 CO J=3–2 (26 m s −1 , 0 ⋅ ′′ 1), we create local line profiles by aligning and stacking spectra in concentric annuli of 0 ⋅ ′′ 02 width. These profiles are modelled with both a toy model and a RADMC-3D model that includes projection effects and Keplerian shear. Results . The resulting local profiles are Gaussian-shaped and broad due to the effect of Keplerian shear. Fitting a RADMC-3D model to the 13 CO data, we find that an optically thick model (temperature of 38 K and mass of 2 × 10 −3 M ⊕ ) reproduces the data, particularly the enhanced intensity at orbital azimuths of ~±45° and ±135°, which forms an X-shape in the velocity integrated intensity map, as well as the broader 12 CO linewidth compared to 13 CO. Scaling this model by the ISM abundance ratio (~77) also reproduces the 12 CO data, but high optical depths and model assumptions limit mass constraints. Conclusions . Keplerian shear causes azimuthally averaged line profiles to appear Gaussian regardless of optical depth; therefore, we caution against using the local line profiles to distinguish between optically thin and thick emission. We constrain the mean molecular weight to 12.6 −1.1 +1.3 , dependent on model assumptions. Although model dependent, our 13 CO results indicate that C 18 O might also be optically thick in CO-rich debris discs, contrary to previous assumptions, and that the mean molecular weight is significantly higher than if H 2 were the dominant gas species, suggesting a non-primordial composition.
- 20 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 705, A201
Open AccessThe ALMA survey to Resolve exoKuiper belt Substructures (ARKS)
Context . CO gas has been detected in ~20 debris discs, typically classified as CO-poor or CO-rich. We present observations of the CO-rich HD 121617 debris disc as part of the ALMA survey to Resolve exoKuiper belt Substructures (ARKS). Aims . We model local CO line profiles in the HD 121617 debris disc to investigate optical depth, CO mass, and temperature. HD 121617 is a well-suited ARKS target due to its previously detected CO emission and moderate inclination, reducing the effect of Keplerian shear. Methods . Using high-resolution ALMA Band 7 observations of 12 CO J=3–2 (26 m s −1 , 0 ⋅ ′′ 1), we create local line profiles by aligning and stacking spectra in concentric annuli of 0 ⋅ ′′ 02 width. These profiles are modelled with both a toy model and a RADMC-3D model that includes projection effects and Keplerian shear. Results . The resulting local profiles are Gaussian-shaped and broad due to the effect of Keplerian shear. Fitting a RADMC-3D model to the 13 CO data, we find that an optically thick model (temperature of 38 K and mass of 2 × 10 −3 M ⊕ ) reproduces the data, particularly the enhanced intensity at orbital azimuths of ~±45° and ±135°, which forms an X-shape in the velocity integrated intensity map, as well as the broader 12 CO linewidth compared to 13 CO. Scaling this model by the ISM abundance ratio (~77) also reproduces the 12 CO data, but high optical depths and model assumptions limit mass constraints. Conclusions . Keplerian shear causes azimuthally averaged line profiles to appear Gaussian regardless of optical depth; therefore, we caution against using the local line profiles to distinguish between optically thin and thick emission. We constrain the mean molecular weight to 12.6 −1.1 +1.3 , dependent on model assumptions. Although model dependent, our 13 CO results indicate that C 18 O might also be optically thick in CO-rich debris discs, contrary to previous assumptions, and that the mean molecular weight is significantly higher than if H 2 were the dominant gas species, suggesting a non-primordial composition.