Duy Nguyen Thi Hang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Duy Nguyen Thi Hang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Cao Dung Truong
Posts and Telecommunications Institute of Technology
3 shared publications - Thuy Tran Thi Thanh
Faculty of Electronics Engineering 1 & EDA Lab, Posts and Telecommunications Institute of Technology, Hanoi, Vietnam
3 shared publications - Hung Nguyen Tan
Advanced Institute of Science and Technology, The University of Da Nang, Da Nang, Vietnam
2 shared publications - Linh Ho Duc Tam
Hue University
2 shared publications - Minh Tuan Trinh
Utah State University, Logan, UT, USA
2 shared publications Hai Ta Duy
Department of Electronic Engineering, Posts and Telecommunications Institute of Technology, Hanoi, Vietnam
1 shared publication
Latest Publications
- Open Access
- 28 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 68999-69010
Design and Experimental Demonstration of a Compact and Wideband 3×3 Silicon Photonic Switch Using Thermo-Optic Phase Shifters and Multimode Interference Couplers
Reconfigurable and non-blocking photonic switches are essential building blocks for next-generation broadband optical interconnects and integrated optical networks. We present the design, fabrication, and experimental demonstration of a compact 3×3 thermo-optic silicon photonic switch implemented by cascading 2×2 restricted-interference MMI units in an MZI–MMI configuration to ensure high stability, fabrication tolerance, and broadband operation. Fabricated on a CMOS-compatible SOI platform using 193-nm DUV lithography and integrated with optimized Ti/W heaters for low-voltage control, the device exhibits robust broadband operation around the C-band. At the central operating wavelength of 1549.5 nm, nine measured switching states show power consumption in the range 19.95–56.65 mW. Overall performance metrics include insertion loss 1.5–6.2 dB, crosstalk ≤ −10 dB, extinction ratio up to 30 dB, and imbalance factor less than -12 dB across C-band. Furthermore, the proposed switch exhibits a fast-switching time of ~20 μs under 4–7 V actuation. The entire circuit occupies 0.75 mm × 1.5 mm. These results demonstrate the proposed 3×3 switch as a compact, broadband, and energy-efficient building block for OWXCs, ROADMs, large-scale PICs, and optical computing platforms.
- 28 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 68999-69010
Open AccessDesign and Experimental Demonstration of a Compact and Wideband 3×3 Silicon Photonic Switch Using Thermo-Optic Phase Shifters and Multimode Interference Couplers
Reconfigurable and non-blocking photonic switches are essential building blocks for next-generation broadband optical interconnects and integrated optical networks. We present the design, fabrication, and experimental demonstration of a compact 3×3 thermo-optic silicon photonic switch implemented by cascading 2×2 restricted-interference MMI units in an MZI–MMI configuration to ensure high stability, fabrication tolerance, and broadband operation. Fabricated on a CMOS-compatible SOI platform using 193-nm DUV lithography and integrated with optimized Ti/W heaters for low-voltage control, the device exhibits robust broadband operation around the C-band. At the central operating wavelength of 1549.5 nm, nine measured switching states show power consumption in the range 19.95–56.65 mW. Overall performance metrics include insertion loss 1.5–6.2 dB, crosstalk ≤ −10 dB, extinction ratio up to 30 dB, and imbalance factor less than -12 dB across C-band. Furthermore, the proposed switch exhibits a fast-switching time of ~20 μs under 4–7 V actuation. The entire circuit occupies 0.75 mm × 1.5 mm. These results demonstrate the proposed 3×3 switch as a compact, broadband, and energy-efficient building block for OWXCs, ROADMs, large-scale PICs, and optical computing platforms.
- 8 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (4) , 1-9
Design and Experimental Demonstration of a High-Performance 2 × 2 Restricted Interference MMI Coupler-Based Optical Power Splitter for C-Band Applications
Silicon waveguide-based optical splitters are fundamental components in the development of advanced functional circuits, including optical switches, routers, modulators, and various optical logic circuits. Among the various approaches, multimode interference (MMI) waveguides are widely employed in optical splitters due to their broad bandwidth, high fabrication tolerance, stability, efficient light confinement, and low transmission loss. In this study, we present the design of an optical splitter based on restricted interference mechanisms, where the precise positioning of input pairs and careful adjustment of the MMI region length are key factors. By applying interference theory, we successfully reduce the length of the RI-MMI coupler. The design undergoes extensive optimization through rigorous 3D-FDTD simulations to ensure optimal performance. Subsequently, we fabricated 11 chip designs using 193-nm deep ultraviolet (DUV) photolithography and plasma-enhanced chemical vapor deposition (PECVD) processes. Performance measurements, conducted through subwavelength grating couplers (SWGC), reveal that our optimized design achieves very low insertion loss (IL) (<5 dB) and minimal reflection ($\lt -23$ dB) across the entire C-band. Additionally, the devices exhibit low ripple, a nearly input-independent coupling ratio (CR), and balanced splitting ratios within a 10 nm range centered around 1555 nm to 1565 nm. Notably, the core component of the splitter is housed within an ultra-compact footprint of$6~\mu $ m$\times 65~\mu $ m. These exceptional characteristics position the proposed device as a promising candidate for large-scale integrated optical circuits in telecommunications applications.- 8 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 61 (4) , 1-9
Design and Experimental Demonstration of a High-Performance 2 × 2 Restricted Interference MMI Coupler-Based Optical Power Splitter for C-Band Applications
Silicon waveguide-based optical splitters are fundamental components in the development of advanced functional circuits, including optical switches, routers, modulators, and various optical logic circuits. Among the various approaches, multimode interference (MMI) waveguides are widely employed in optical splitters due to their broad bandwidth, high fabrication tolerance, stability, efficient light confinement, and low transmission loss. In this study, we present the design of an optical splitter based on restricted interference mechanisms, where the precise positioning of input pairs and careful adjustment of the MMI region length are key factors. By applying interference theory, we successfully reduce the length of the RI-MMI coupler. The design undergoes extensive optimization through rigorous 3D-FDTD simulations to ensure optimal performance. Subsequently, we fabricated 11 chip designs using 193-nm deep ultraviolet (DUV) photolithography and plasma-enhanced chemical vapor deposition (PECVD) processes. Performance measurements, conducted through subwavelength grating couplers (SWGC), reveal that our optimized design achieves very low insertion loss (IL) (<5 dB) and minimal reflection ($\lt -23$ dB) across the entire C-band. Additionally, the devices exhibit low ripple, a nearly input-independent coupling ratio (CR), and balanced splitting ratios within a 10 nm range centered around 1555 nm to 1565 nm. Notably, the core component of the splitter is housed within an ultra-compact footprint of$6~\mu $ m$\times 65~\mu $ m. These exceptional characteristics position the proposed device as a promising candidate for large-scale integrated optical circuits in telecommunications applications.- Open Access
- 9 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 102387-102396
Compact, Highly Efficient, and Controllable Simultaneous 2 × 2 Three-Mode Silicon Photonic Switch in the Continuum Band
Multimode switch (MMS) allows realizing multimode optical communication enabling high-speed communication. However, to develop such an ultrafast switch for simultaneous multimode with a compact size is very challenging. In this paper, we design and demonstrate a compact multimode 2×2 MMS based on numerical simulation methods using silicon Ψ-junctions and multimode interference (MMI) couplers. The switch is controlled by thermal-optic phase shifters which is able to switch simultaneously states of the optical signal between three quasi-transverse electric modes. The MMS exhibits a low insertion loss from -1.5 dB to -3 dB, low crosstalk below -22 dB, and high extinction ratio larger than 22 dB in 40-nm bandwidth in the third telecom window from 1520 to 1560 nm, respectively. With a compact footprint of 12 μm ×1300 μm, the MMS exhibits relatively large dimensional tolerances. Besides, the MMS provides total electric power consumption levels smaller than 103 mW at an ultrafast switching time of 4.4 μs without the impact of the plasmonic effect. Furthermore, the conceptual principle of the proposed MMS can be reconfigurable and scalable in dimensional multifunctional on-chip mode-division multiplexing optical interconnects and promising potential for photonic large scale integration circuits in the continuum band.
- 9 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 102387-102396
Open AccessCompact, Highly Efficient, and Controllable Simultaneous 2 × 2 Three-Mode Silicon Photonic Switch in the Continuum Band
Multimode switch (MMS) allows realizing multimode optical communication enabling high-speed communication. However, to develop such an ultrafast switch for simultaneous multimode with a compact size is very challenging. In this paper, we design and demonstrate a compact multimode 2×2 MMS based on numerical simulation methods using silicon Ψ-junctions and multimode interference (MMI) couplers. The switch is controlled by thermal-optic phase shifters which is able to switch simultaneously states of the optical signal between three quasi-transverse electric modes. The MMS exhibits a low insertion loss from -1.5 dB to -3 dB, low crosstalk below -22 dB, and high extinction ratio larger than 22 dB in 40-nm bandwidth in the third telecom window from 1520 to 1560 nm, respectively. With a compact footprint of 12 μm ×1300 μm, the MMS exhibits relatively large dimensional tolerances. Besides, the MMS provides total electric power consumption levels smaller than 103 mW at an ultrafast switching time of 4.4 μs without the impact of the plasmonic effect. Furthermore, the conceptual principle of the proposed MMS can be reconfigurable and scalable in dimensional multifunctional on-chip mode-division multiplexing optical interconnects and promising potential for photonic large scale integration circuits in the continuum band.