YYYongrui Yang

Yongrui Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yongrui Yang has a total of 56 co-authors. Here are the top co-authors by number of shared publications:

  • Yanlin Song

    Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China

    12 shared publications
  • Yali Qiao

    Beijing National Laboratory for Molecular Science CAS Key Laboratory of Green Printing Institute of Chemistry Chinese Academy of Sciences Beijing 100190 China

    11 shared publications
  • Kun Zhang

    CAS Key Laboratory of Green Printing, Beijing National Laboratory for Molecular Science (BNLMS)

    6 shared publications
  • Fanyi Min

    Department of Chemistry Tsinghua University Beijing China

    5 shared publications
  • Yang Wang

    Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing, China

    4 shared publications
  • Zhiyuan Qu

    Beijing National Laboratory for Molecular Science CAS Key Laboratory of Green Printing Institute of Chemistry Chinese Academy of Sciences Beijing 100190 China

    4 shared publications

Latest Publications

  • Bubble‐Assisted Dynamic Confinement Enables Programmable Solid‐State Photoswitching and Heterogeneous Photoresponsive Architectures

    by Mengmeng Guo, Xuanchi Yu, Zhaoyang Zhang, Bingqian Bi, Fanyi Min, Jie Gao, Lutong Guo, Yumeng Wang, Yongrui Yang, Xingyu Yao, et al.

    Achieving programmable photoisomerization of azobenzenes in the solid‐state remains a long‐standing challenge for photoresponsive materials. Here, we introduce a dynamic soft‐confinement strategy using bubble‐assisted assembly to manipulate molecular aggregation via tunable surface energy at the solid‐liquid interface. By controlling the morphologies of microfluidic channels (necktie‐like, strip‐like, and necklace‐like), we achieve distinct self‐assembled aggregates of microcubes, corded scaffolds, and microplates, with tailored freedom of the photoswitchable molecule. The strip‐like channel, formed by thinning bubble walls, traps metastable intermediates, yielding a corded scaffold structure with favorable light penetration, weaker intermolecular interactions, and loosened molecular packing for isomerization. This design achieves near‐quantitative bidirectional E ⇆ Z photoisomerization (96%–98%) in the solid‐state, rivaling solution‐like performance. Multi‐scale characterization and computational analyses reveal the critical role of confined aggregation kinetics in controlling molecular motion. Furthermore, heterogeneous patterning demonstrates programmable photoresponsive arrays for photomechanical applications. This strategy provides a scalable platform for dynamically controlling supramolecular self‐assembly pathways and designing solid‐state photoresponsive materials with programmable functions.

  • Ink Design for Printing Perovskite Solar Cells and Modules

    by Yongrui Yang, Zhaokai Liu, Weifu Zhang, Jingjing Wu, Kun Zhang, Yang Wang, Lei Meng, Mingjian Yuan, Yali Qiao, Yanlin Song

    Printed metal halide perovskite photovoltaics combine high device performance with low-cost manufacturing, which have become one of the most promising candidates for next-generation photovoltaic technologies. With the rapid development of printing methods for scalable film deposition, printed perovskite solar cells have already achieved a power conversion efficiency (PCE) exceeding 26%. However, the PCE of commercial-size perovskite solar modules remains near 21%, indicating that the key bottleneck is no longer the intrinsic optoelectronic potential of the absorber but the translation of precursor inks into uniform, scalable, and durable films. During the printing process, ink design governs precursor solvent coordination, intermediate-phase evolution, colloidal stability, rheology, crystallization kinetics, wet-film stability, and ultimately large-area film quality. This Review summarizes perovskite precursor inks from a solution chemistry to manufacturing perspective and discusses the influences of chemical composition, solvent selection, mixed-solvent interactions, solvent-perovskite intermediates, crystallization control, solvent extraction methods, and rheological regulation on the film morphology during the scalable printing process. We further highlight industrially relevant metrics that increasingly determine viable ink systems, including shelf life, ambient air tolerance, coating-speed window, defect suppression, reproducibility, solvent toxicity, and compatibility with module integration and encapsulation. By linking ink formulation to film formation, scalable deposition, and module performance, this Review provides direction for printable ink design and identifies the critical challenges that should be addressed to realize reproducible, low-waste, high-throughput, and durable printed perovskite solar modules.

  • Open Access

    From Materials to Medical Images: Translating Perovskite‐Based X‐Ray Detectors Toward Clinical Imaging

    by Sibin Wang, Yongrui Yang, Kun Zhang, Xiaojuan Lu, Hong Yin, Yali Qiao, Xiaojia Zheng, Xiao Zhang, Yanlin Song

    As an indispensable part of modern diagnosis and image‐guided therapy, medical X‐ray imaging requires detector materials that combine low‐dose operation, high spatial resolution, fast response, energy‐resolved capability, long‐term stability, and scalable integration. Metal halide perovskites are promising candidates for high‐performance and low‐cost X‐ray absorbers, because their strong X‐ray attenuation, tunable composition, defect tolerance, favorable charge transport, and low‐temperature processability enable both direct‐ and indirect‐conversion detector designs. However, clinical translation cannot be assessed only by sensitivity or detection limit. Practical medical detectors must also satisfy requirements in modulation transfer function, noise power spectrum, detective quantum efficiency, lag/ghosting, dynamic range, pixel uniformity, readout compatibility, radiation durability, and safety. These requirements define a key gap between laboratory demonstrations and practical clinical applications. This review examines perovskite‐based X‐ray detectors from a materials‐to‐medical‐images perspective. Conventional detector materials are first considered as reference platforms for defining clinical imaging requirements. Recent progress in perovskite‐based X‐ray detectors is then discussed with emphasis on their relevance to clinical imaging. Finally, the key barriers to clinical implementation are analyzed. By linking material properties, detector architectures, imaging metrics, and modality‐specific requirements, this review outlines a translation roadmap for perovskite‐based X‐ray detectors toward future low‐dose, high‐resolution, and energy‐resolved clinical imaging.

  • Tailored Colloidal Shapes in Precursor Solutions for Efficient Blade‐Coated Perovskite Solar Modules

    by Yongrui Yang, Jingjing Wu, Kun Zhang, Yang Wang, Jie Gao, Mengmeng Guo, Fanyi Min, Yumeng Wang, Lutong Guo, Yu Chen, et al.

    Metal halide perovskite solar cells (PSCs) have emerged as one of the most promising candidates for next‐generation photovoltaic technologies. However, perovskite films deposited by blade‐coating usually exhibit inferior film morphology compared to those fabricated by spin‐coating, which hinders the power conversion efficiency (PCE) and stability of the scalable perovskite solar modules (PSMs). Herein, ellipsoidal colloids are tailored in the perovskite precursor solution by incorporating perovskite colloids and polymer additives. Compared to unregulated spherical colloids, the ellipsoidal colloids demonstrate more oriented packing during the blade‐coating process, which is due to the anisotropic driven force from the fluidic flow in the meniscus. As a result of the improved film morphology, the regulated PSCs and PSMs achieve superior PCE of 24.31% and 21.67% (21.37% certified), respectively, for aperture areas of 0.09 and 13.94 cm 2 , and 89% initial PCE after 600 h continuous operation.


  • Solution‐Processed Micro‐Nanostructured Electron Transport Layer via Bubble‐Assisted Assembly for Efficient Perovskite Photovoltaics

    by Yongrui Yang, Fanyi Min, Yiyang Wang, Lutong Guo, Haoran Long, Zhiyuan Qu, Kun Zhang, Yang Wang, Juehan Yang, Yu Chen, et al.

    Organic–inorganic halide perovskite solar cells (PSCs) have attracted significant attention in photovoltaic research, owing to their superior optoelectronic properties and cost‐effective manufacturing techniques. However, the unbalanced charge carrier diffusion length in perovskite materials leads to the recombination of photogenerated electrons and holes. The inefficient charge carrier collecting process severely affects the power conversion efficiency (PCE) of the PSCs. Herein, a solution‐processed SnO2 array electron transport layer with precisely tunable micro‐nanostructures is fabricated via a bubble‐template‐assisted approach, serving as both electron transport layers and scaffolds for the perovskite layer. Due to the optimized electron transporting pathway and enlarged perovskite grain size, the PSCs achieve a PCE of 25.35% (25.07% certificated PCE).


  • Spatiotemporal-Dependent Confinement Effect of Bubble Swarms Enables a Fractal Hierarchical Assembly with Promoted Chirality

    by Jie Gao, Guanghui Ouyang, Peng Zhou, Peng Shang, Haoran Long, Lukang Ji, Zhiyuan Qu, Mengmeng Guo, Yongrui Yang, Fenggui Zhao, et al.

    The submarine-confined bubble swarm is considered an important constraining environment for the early evolution of living matter due to the abundant gas/water interfaces it provides. Similarly, the spatiotemporal characteristics of the confinement effect in this particular scenario may also impact the origin, transfer, and amplification of chirality in organisms. Here, we explore the confinement effect on the chiral hierarchical assembly of the amphiphiles in the confined bubble array stabilized by the micropillar templates. Compared with the other confinement conditions, the assembly in the bubble scenario yields a fractal morphology and exhibits a unique level of the chiral degree, ordering, and orientation consistency, which can be attributed to the characteristic interfacial effects of the rapidly formed gas/water interfaces. Thus, molecules with a balanced amphiphilicity can be more favorable for the promotion. Not limited to the pure enantiomers, chiral amplification of the enantiomer-mixed assembly is observed only in the bubble scenario. Beyond the interfacial mechanism, the fast formation kinetics of the confined liquid bridges in the bubble scenario endows the assembly with the tunable hierarchical morphology when regulating the amphiphilicity, aggregates, and confined spaces. Furthermore, the chiral-induced spin selectivity (CISS) effect of the fractal hierarchical assembly was systematically investigated, and a strategy based on photoisomerization was developed to efficiently modulate the CISS effect. This work provides insights into the robustness of confined bubble swarms in promoting a chiral hierarchical assembly and the potential applications of the resulting chiral hierarchical patterns in solid-state spintronic and optical devices.


  • Volatile Dual‐Solvent Assisted Intermediate Phase Regulation for Anti‐Solvent‐Free Perovskite Photovoltaics

    by Yongrui Yang, Yang Wang, Zhiyuan Qu, Kun Zhang, Tongling Liang, Shengnan Chen, Wenkun Lv, Fanyi Min, Yu Chen, Yali Qiao, et al.

    The unprecedented development of perovskite solar cells (PSCs) makes them one of the most promising candidates for terawatt‐scale green energy production with low cost. However, the high boiling point solvents during the solution‐processed film deposition cause anisotropic crystal growth and toxic solvent vapor during high‐throughput manufacturing. Here, a dual‐component green solvent consisting of isopropyl acetate and acetonitrile is proposed to form a volatile perovskite precursor, which can realize the high‐quality perovskite thin film deposition by intermediate phase regulation. A room‐temperature stable perovskite intermediate phase is constructed with the engagement of isopropyl acetate as co‐solvent, which suppresses the exploding nucleation rate in volatile perovskite precursor, providing a fine grain growth rate and wide processing window in scalable film deposition. The corresponding PSCs fabricated by blade coating without anti‐solvents or gas quenching achieve power conversion efficiency (PCE) of 16.37 % and 15.29 % for the areas of 14.08 cm2 and 37.83 cm2, respectively.


  • Volatile Dual‐Solvent Assisted Intermediate Phase Regulation for Anti‐Solvent‐Free Perovskite Photovoltaics

    by Yongrui Yang, Yang Wang, Zhiyuan Qu, Kun Zhang, Tongling Liang, Shengnan Chen, Wenkun Lv, Fanyi Min, Yu Chen, Yali Qiao, et al.

    The unprecedented development of perovskite solar cells (PSCs) makes them one of the most promising candidates for terawatt‐scale green energy production with low cost. However, the high boiling point solvents during the solution‐processed film deposition cause anisotropic crystal growth and toxic solvent vapor during high‐throughput manufacturing. Here, a dual‐component green solvent consisting of isopropyl acetate and acetonitrile is proposed to form a volatile perovskite precursor, which can realize the high‐quality perovskite thin film deposition by intermediate phase regulation. A room‐temperature stable perovskite intermediate phase is constructed with the engagement of isopropyl acetate as co‐solvent, which suppresses the exploding nucleation rate in volatile perovskite precursor, providing a fine grain growth rate and wide processing window in scalable film deposition. The corresponding PSCs fabricated by blade coating without anti‐solvents or gas quenching achieve power conversion efficiency (PCE) of 16.37 % and 15.29 % for the areas of 14.08 cm2 and 37.83 cm2, respectively.


  • Open Access

    Outside Back Cover: Volume 3 Issue 3

    by Wenkun Lv, Zhaoxin Liu, Zheng Li, Zhifei Han, Yongrui Yang, Qi Li, Yali Qiao, Yanlin Song

  • Open Access

    Flexible substrates enabled highly integrated patterns with submicron precision toward intrinsically stretchable circuits

    by Wenkun Lv, Zhaoxin Liu, Zheng Li, Zhifei Han, Yongrui Yang, Qi Li, Yali Qiao, Yanlin Song

    Fabricating high integration density, high resolution, and intrinsically stretchable patterns by patterned technologies remain challenging. Template printing enabled high‐precision patterned fabrication at a facile operation. However, the pattern spacing constraint is the major limitation to high integration density. In this study, we develop an elastomer‐assisted strategy to improve the template printing process, which involves patterning on the prestrain elastic substrate. This strategy overcomes the spacing limitation and enables the realization of a centimeter‐scale pattern with submicron precision. Particularly, the integration density of fabricated intrinsically stretchable patterns can reach 1932 lines on a substrate of 0.5 cm2; the assembly lines with a feature size of 880 nm and an interval of 955 nm. Furthermore, we demonstrate a facile approach for constructing silver nanoparticle/liquid metal alloy composite conductive patterns. The as‐prepared flexible electrodes can withstand up to 150% strain and a 2‐mm bend radius. This method provides new insights into template printing technology. Additionally, it opens a route for the simultaneous construction of functional patterned arrays with large scale, high integration density, and intrinsic stretchability, which will be useful for the integrated fabrication of various flexible electronic devices.