Dahua Ren
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dahua Ren has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Xingyi Tan
Chongqing Three Gorges University
6 shared publications Qiang Li
College of Intelligent systems science and engineering, Hubei Minzu University, Enshi, 445000, CHINA
5 shared publicationsTeng Zhang
College of Intelligent Systems Science and Engineering, Hubei Minzu University, Enshi 445000, People’s Republic of China
4 shared publicationsYuan Zhang
College of Intelligent Systems Science and Engineering, Hubei Minzu University, Enshi 445000, People’s Republic of China
4 shared publicationsKai Qian
School of Advanced Materials and Mechatronic Engineering, Hubei Minzu University, Enshi, China
3 shared publicationsDong Li
Hunan Key Laboratory of Two-Dimensional Materials, Advanced Catalytic Engineering Research Center of the Ministry of Education, and College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082, People’s Republic of China
2 shared publications
Latest Publications
- 2 January 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (1) , 015903
Synthesis of tungsten bronze nanowires and evaluation of their proton storage characteristics
Despite the promise of hexagonal tungsten bronze (h-WO 3 ) as a proton storage host due to its 3.67 Å tunnels and Grotthuss conduction mechanism, its practical application remains limited by irreversible H + trapping, structural degradation, and sluggish kinetics. To overcome these limitations, we developed a tunnel cation engineering strategy by precisely pre-embedding Na + , K + , or NH 4 + ions into h-WO 3 tunnels via controlled use of sulfate precursors (Na 2 SO 4 , K 2 SO 4 , (NH 4 ) 2 SO 4 ). Structural characterizations confirmed that Na + pre-embedding yielded optimal lattice matching (0.3842 nm), minimizing distortion, while K + and NH 4 + induced lattice strain and disorder. Electrochemical tests demonstrated that Na + -embedded h-WO 3 achieved excellent cycling stability (99% capacity retention after 100 cycles at 100 C) by mitigating due to framework collapse. Although K + /NH 4 + -doped tungsten bronze nanowires exhibit higher H + storage capacity, their stability degradation caused by structural defects and reduced dimensions makes the Na + -embedded h-WO 3 with an ordered crystalline lattice more advantageous in balancing capacity and durability. Ex situ XRD revealed a two-stage proton storage mechanism in Na + -embedded h-WO 3 : bare H + insertion (0.3 V to −0.05 V) led to gradual lattice expansion, whereas hydrated H 3 O + insertion (−0.05 V to −0.4 V) triggered rapid ab-plane expansion. This study established a ‘pre-embedded cation-lattice strain-performance’ correlation, offering a new paradigm for designing high-stability proton storage materials.
- 2 January 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (1) , 015903
Synthesis of tungsten bronze nanowires and evaluation of their proton storage characteristics
Despite the promise of hexagonal tungsten bronze (h-WO 3 ) as a proton storage host due to its 3.67 Å tunnels and Grotthuss conduction mechanism, its practical application remains limited by irreversible H + trapping, structural degradation, and sluggish kinetics. To overcome these limitations, we developed a tunnel cation engineering strategy by precisely pre-embedding Na + , K + , or NH 4 + ions into h-WO 3 tunnels via controlled use of sulfate precursors (Na 2 SO 4 , K 2 SO 4 , (NH 4 ) 2 SO 4 ). Structural characterizations confirmed that Na + pre-embedding yielded optimal lattice matching (0.3842 nm), minimizing distortion, while K + and NH 4 + induced lattice strain and disorder. Electrochemical tests demonstrated that Na + -embedded h-WO 3 achieved excellent cycling stability (99% capacity retention after 100 cycles at 100 C) by mitigating due to framework collapse. Although K + /NH 4 + -doped tungsten bronze nanowires exhibit higher H + storage capacity, their stability degradation caused by structural defects and reduced dimensions makes the Na + -embedded h-WO 3 with an ordered crystalline lattice more advantageous in balancing capacity and durability. Ex situ XRD revealed a two-stage proton storage mechanism in Na + -embedded h-WO 3 : bare H + insertion (0.3 V to −0.05 V) led to gradual lattice expansion, whereas hydrated H 3 O + insertion (−0.05 V to −0.4 V) triggered rapid ab-plane expansion. This study established a ‘pre-embedded cation-lattice strain-performance’ correlation, offering a new paradigm for designing high-stability proton storage materials.
- Open Access
- 8 December 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (57) , 49210-49216
Adjustable bandgap of a type-II AsP/SnS 2 van der Waals heterostructure using strain: outstanding electronic, optical, and photocatalytic properties
In recent years, vertically stacked van der Waals heterostructures have attracted significant attention due to their highly tunable electronic properties and exceptional optical performance.
- 8 December 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (57) , 49210-49216
Open AccessAdjustable bandgap of a type-II AsP/SnS 2 van der Waals heterostructure using strain: outstanding electronic, optical, and photocatalytic properties
In recent years, vertically stacked van der Waals heterostructures have attracted significant attention due to their highly tunable electronic properties and exceptional optical performance.
- 21 March 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (14) , 7288-7295
First-principles analysis of the photocurrent in a monolayer α-selenium p–n junction optoelectronic device
Two-dimensional monoelemental materials have emerged as promising candidates for use in the development of next-generation optoelectronic devices. In this work, we investigate the photovoltaic effect of monolayer (ML) α-selenium p–n junctions by using ab initio quantum transport simulations. Our research results indicate that the photocurrent of the ML α-selenium p–n junction optoelectronic device exhibits anisotropy. The maximum photoresponsivity (178.49 a0 2 per photon) in the armchair (ARM) direction is one-half that (341.72 a0 2 per photon) in the zigzag (ZZ) direction. When stress is applied, the most significant modulation of photoresponsivity occurs in the ZZ direction, reaching a value of 613.21 a0 2 per photon. When a gate voltage is applied, the most significant modulation of photoresponsivity occurs in the ARM direction, reaching a value of −684.88 a0 2 per photon. When a thermal difference is applied, the most significant modulation of photoresponsivity occurs in the ARM direction, reaching a value of 412.14 a0 2 per photon. Thus, ML α-selenium in the ZZ direction can be used for photodetection and photosensing, while ML α-selenium in the ARM direction can be used for photosensing. Both strain engineering and temperature differences cause a blueshift in the photocurrent as a function of energy. Our work paves the way for research into low-dimensional monoelemental-material optoelectronic devices.
- 21 March 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (14) , 7288-7295
First-principles analysis of the photocurrent in a monolayer α-selenium p–n junction optoelectronic device
Two-dimensional monoelemental materials have emerged as promising candidates for use in the development of next-generation optoelectronic devices. In this work, we investigate the photovoltaic effect of monolayer (ML) α-selenium p–n junctions by using ab initio quantum transport simulations. Our research results indicate that the photocurrent of the ML α-selenium p–n junction optoelectronic device exhibits anisotropy. The maximum photoresponsivity (178.49 a0 2 per photon) in the armchair (ARM) direction is one-half that (341.72 a0 2 per photon) in the zigzag (ZZ) direction. When stress is applied, the most significant modulation of photoresponsivity occurs in the ZZ direction, reaching a value of 613.21 a0 2 per photon. When a gate voltage is applied, the most significant modulation of photoresponsivity occurs in the ARM direction, reaching a value of −684.88 a0 2 per photon. When a thermal difference is applied, the most significant modulation of photoresponsivity occurs in the ARM direction, reaching a value of 412.14 a0 2 per photon. Thus, ML α-selenium in the ZZ direction can be used for photodetection and photosensing, while ML α-selenium in the ARM direction can be used for photosensing. Both strain engineering and temperature differences cause a blueshift in the photocurrent as a function of energy. Our work paves the way for research into low-dimensional monoelemental-material optoelectronic devices.
- 16 January 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1329
Refined h-WO3 by Mo doping: A strategy for enhancing hydrogen ion storage performance
- 16 January 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1329
Refined h-WO3 by Mo doping: A strategy for enhancing hydrogen ion storage performance
- 21 November 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (48) , 19726-19734
The device performance limit of in-plane monolayer VTe 2 /WTe 2 heterojunction-based field-effect transistors
To overcome the scaling restriction on silicon-based field-effect transistors (FETs), two-dimensional (2D) transition metal dichalcogenides (TMDs) have been strongly proposed as alternative materials.
- 21 November 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (48) , 19726-19734
The device performance limit of in-plane monolayer VTe 2 /WTe 2 heterojunction-based field-effect transistors
To overcome the scaling restriction on silicon-based field-effect transistors (FETs), two-dimensional (2D) transition metal dichalcogenides (TMDs) have been strongly proposed as alternative materials.
- 6 April 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (17) , 5779-5787
Performance limit of one-dimensional SbSI nanowire transistors
The gate-length ( L g , L g = 5, 3, 1 nm) n- and p-type gate-all-around SbSI FETs having a suitable underlap can fulfill the power dissipation, delay time, and on-state current for the 2028 prerequisites for the HP and LP requirement of the ITRS of 2013.
- 6 April 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (17) , 5779-5787
Performance limit of one-dimensional SbSI nanowire transistors
The gate-length ( L g , L g = 5, 3, 1 nm) n- and p-type gate-all-around SbSI FETs having a suitable underlap can fulfill the power dissipation, delay time, and on-state current for the 2028 prerequisites for the HP and LP requirement of the ITRS of 2013.
- 5 December 2022
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (3) , 2056-2062
One dimensional MOSFETs for sub-5 nm high-performance applications: a case of Sb2Se3 nanowires
Low-dimensional materials have been proposed as alternatives to silicon-based field-effect transistor (FET) channel materials in order to overcome the scaling limitation. In the present research, gate-all-around (GAA) Sb2Se3 nanowire FETs were simulated using the ab initio quantum transport method. The gate-length (Lg, Lg = 5 nm) GAA Sb2Se3 FETs with an underlap (UL, UL = 2, 3 nm) could satisfy the on-state current (Ion) and delay time (τ) of the 2028 requirements for high performance (HP) applications of the International Technology Roadmap for Semiconductors (ITRS) 2013. It is interesting that the Lg = 3 nm GAA Sb2Se3 FETs with a UL = 3 nm can meet the Ion, power dissipation (PDP), and τ of the 2028 requirements of ITRS 2013 for HP applications. Therefore, GAA Sb2Se3 FETs can be a potential candidate scaling Moore's law downward to 3 nm.
- 5 December 2022
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (3) , 2056-2062
One dimensional MOSFETs for sub-5 nm high-performance applications: a case of Sb2Se3 nanowires
Low-dimensional materials have been proposed as alternatives to silicon-based field-effect transistor (FET) channel materials in order to overcome the scaling limitation. In the present research, gate-all-around (GAA) Sb2Se3 nanowire FETs were simulated using the ab initio quantum transport method. The gate-length (Lg, Lg = 5 nm) GAA Sb2Se3 FETs with an underlap (UL, UL = 2, 3 nm) could satisfy the on-state current (Ion) and delay time (τ) of the 2028 requirements for high performance (HP) applications of the International Technology Roadmap for Semiconductors (ITRS) 2013. It is interesting that the Lg = 3 nm GAA Sb2Se3 FETs with a UL = 3 nm can meet the Ion, power dissipation (PDP), and τ of the 2028 requirements of ITRS 2013 for HP applications. Therefore, GAA Sb2Se3 FETs can be a potential candidate scaling Moore's law downward to 3 nm.
- Open Access
- 10 February 2022
- Published by Frontiers Media SA in Frontiers in Physics
- Vol. 10
The Magnetic and Thermally-Induced Spin-Related Transport Features Using Germanene Nanoribbons With Zigzag and Klein Edges
The current work employs the first-principles computations and non-equilibrium Greens function to investigate the magnetic and thermally-induced spin-related transport features using germanene nanoribbons with zigzag and Klein edges (ZKGeNRs). It was demonstrated that the ZKGeNRs with various widths (N) are placed in various spin-resolved electronic states. By increasing the width parameter N from 4 to 9, the ZKGeNRs moves from an indirect-gap bipolar magnetic semiconducting state (BMS) to bipolar spin gapless semiconductor (BSGS), and finally to ferromagnetic metal (FM). Moreover, since the right and the left temperatures of the ZKGeNRs device are different, the spin-up and spin-down currents flow in reverse orientations, demonstrating the spin-dependent Seebeck effect (SDSE). Besides, the threshold temperature decreases as N increases and then disappears, while the spin currents increase as N increases. Simulation results indicated that the ZKGeNRs could be an appropriate choice for spin caloritronic devices and could be utilized in future low-power consumption applications.
- 10 February 2022
- Published by Frontiers Media SA in Frontiers in Physics
- Vol. 10
Open AccessThe Magnetic and Thermally-Induced Spin-Related Transport Features Using Germanene Nanoribbons With Zigzag and Klein Edges
The current work employs the first-principles computations and non-equilibrium Greens function to investigate the magnetic and thermally-induced spin-related transport features using germanene nanoribbons with zigzag and Klein edges (ZKGeNRs). It was demonstrated that the ZKGeNRs with various widths (N) are placed in various spin-resolved electronic states. By increasing the width parameter N from 4 to 9, the ZKGeNRs moves from an indirect-gap bipolar magnetic semiconducting state (BMS) to bipolar spin gapless semiconductor (BSGS), and finally to ferromagnetic metal (FM). Moreover, since the right and the left temperatures of the ZKGeNRs device are different, the spin-up and spin-down currents flow in reverse orientations, demonstrating the spin-dependent Seebeck effect (SDSE). Besides, the threshold temperature decreases as N increases and then disappears, while the spin currents increase as N increases. Simulation results indicated that the ZKGeNRs could be an appropriate choice for spin caloritronic devices and could be utilized in future low-power consumption applications.
- 20 January 2022
- Published by Springer Nature in Journal of Wuhan University of Technology-Mater. Sci. Ed.
- Vol. 37 (1) , 28-31
The Electronic and Optical Properties of Vertically Stacked GaN-WS2 Heterostructure
- 20 January 2022
- Published by Springer Nature in Journal of Wuhan University of Technology-Mater. Sci. Ed.
- Vol. 37 (1) , 28-31
The Electronic and Optical Properties of Vertically Stacked GaN-WS2 Heterostructure
- 17 January 2022
- Published by Elsevier in Chemical Physics Letters
- Vol. 791
Robust type-I band alignment in ZnS nanowire/MoTe2 nanotube van der Waals heterostructures
- 17 January 2022
- Published by Elsevier in Chemical Physics Letters
- Vol. 791
Robust type-I band alignment in ZnS nanowire/MoTe2 nanotube van der Waals heterostructures