Sven Pohl
Research Subjects
Research Interests
Sven Pohl has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Ramón Piloto-Rodríguez
Universidad Tecnológica de La Habana
3 shared publications - Felix Brück
THM University of Applied Sciences, Competence Centre for Sustainable Engineering and Environmental Systems (ZEuUS), Wiesenstr. 14, D-35390 Gießen, Germany
1 shared publication - Harald Weigand
Centre of Competence for Sustainable Engineering and Environmental Systems, Technical University of Central Hesse, Wiesenstraße 14, 35390 Gießen, Germany
1 shared publication Indira Tobío‐Pérez
Center for the Studies of Renewable Energies Universidad Tecnológica de La Habana José A. Echeverría La Habana Cuba
1 shared publication- Kevin Schnabel
THM University of Applied Sciences, Competence Centre for Sustainable Engineering and Environmental Systems (ZEuUS), Wiesenstr. 14, D-35390 Gießen, Germany
1 shared publication - Lizet Rodríguez-Machín
Universidad Central “Marta Abreu” de Las Villas, Santa Clara
1 shared publication
Latest Publications
- 14 July 2024
- Published by Springer Nature
- p. 351-372
Energy Production from Algal-Bacterial and Other Biosolids for Electricity
- 14 July 2024
- Published by Springer Nature
- p. 351-372
Energy Production from Algal-Bacterial and Other Biosolids for Electricity
- Open Access
- 21 November 2022
- Published by University of the Aegean
Transferring the Carbonation of Biomass Bottom Ash from Batch to Continuous Operation
Biomass incineration residues may be used for CO2 capture and storage by carbonation of waste-borne metal hydroxides. Moist carbonation of these ashes can be performed under mild conditions (ambient pressure and temperature) and accelerated by using a CO2-rich gas. The process requires the wetting of the typically dry-discharged ashes and highly depends on the moisture content. Handling of the moist ashes in continuously operated reactors is challenging, especially due to build-up of incrustations. In this study, the carbonation of biomass bottom ash was performed in fixed-bed and rotating drum reactors. Wetting was performed either manually prior to fixed-bed carbonation or with spray-nozzles. The moisture dependent CO2 uptake was evaluated by a gas balance. Results show that the CO2 uptake in the fixed-bed and rotating drum was consistently between 20 and 35 g/kg, although the CO2 concentration in the rotating drum was significantly lower (10 vol% vs. 100 vol%). In the fixed bed, the uptake strongly depended on the moisture content, while in the rotating drum the effect was less pronounced. Application of such rotating drums allows for a continuous solids feed while combining wetting and carbonation.
- 21 November 2022
- Published by University of the Aegean
Open AccessTransferring the Carbonation of Biomass Bottom Ash from Batch to Continuous Operation
Biomass incineration residues may be used for CO2 capture and storage by carbonation of waste-borne metal hydroxides. Moist carbonation of these ashes can be performed under mild conditions (ambient pressure and temperature) and accelerated by using a CO2-rich gas. The process requires the wetting of the typically dry-discharged ashes and highly depends on the moisture content. Handling of the moist ashes in continuously operated reactors is challenging, especially due to build-up of incrustations. In this study, the carbonation of biomass bottom ash was performed in fixed-bed and rotating drum reactors. Wetting was performed either manually prior to fixed-bed carbonation or with spray-nozzles. The moisture dependent CO2 uptake was evaluated by a gas balance. Results show that the CO2 uptake in the fixed-bed and rotating drum was consistently between 20 and 35 g/kg, although the CO2 concentration in the rotating drum was significantly lower (10 vol% vs. 100 vol%). In the fixed bed, the uptake strongly depended on the moisture content, while in the rotating drum the effect was less pronounced. Application of such rotating drums allows for a continuous solids feed while combining wetting and carbonation.
- 8 March 2022
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 44 (1) , 247-256
Predicting bio-oil yield obtained from lignocellulosic biomass pyrolysis using artificial neural networks
The prediction of bio-oil yield from pyrolysis of lignocellulosic biomass is important for processes optimization, modeling, and installation’s design. This work models the bio-oil of lignocellulosic biomass yield by Artificial Neural Networks (ANN), being the inputs: cellulose, hemicellulose, lignin, pyrolysis temperature, heating rate, N2 flow rate, and particle size. A database was created with 34 biomass types, modeling with 329 samples, training with 80%, and validating with 20%. A previous stage of screening was carried out with 100% of data for choosing the algorithm of the second phase and the number of neurons in the hidden layer; the selection criteria were the mean absolute error (MAE) and the correlation coefficient. The best performance was for backpropagation/Levenberg-Marquardt with 7:13:1 as ANN architecture. All ANN with less than 1% of MAE were tested for validating and the weight’s matrix of the best one is shown. The selected network with a correlation coefficient of 0.9739 and MAE of 1.7159% for validation, only had four outlier values between 5 and 6%, the remaining 62 samples with all 263 used in training, had less than 5% of difference compared to the experimental values, thus representing a very accurate model for predicting bio-oil yield.
- 8 March 2022
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 44 (1) , 247-256
Predicting bio-oil yield obtained from lignocellulosic biomass pyrolysis using artificial neural networks
The prediction of bio-oil yield from pyrolysis of lignocellulosic biomass is important for processes optimization, modeling, and installation’s design. This work models the bio-oil of lignocellulosic biomass yield by Artificial Neural Networks (ANN), being the inputs: cellulose, hemicellulose, lignin, pyrolysis temperature, heating rate, N2 flow rate, and particle size. A database was created with 34 biomass types, modeling with 329 samples, training with 80%, and validating with 20%. A previous stage of screening was carried out with 100% of data for choosing the algorithm of the second phase and the number of neurons in the hidden layer; the selection criteria were the mean absolute error (MAE) and the correlation coefficient. The best performance was for backpropagation/Levenberg-Marquardt with 7:13:1 as ANN architecture. All ANN with less than 1% of MAE were tested for validating and the weight’s matrix of the best one is shown. The selected network with a correlation coefficient of 0.9739 and MAE of 1.7159% for validation, only had four outlier values between 5 and 6%, the remaining 62 samples with all 263 used in training, had less than 5% of difference compared to the experimental values, thus representing a very accurate model for predicting bio-oil yield.
- 5 November 2021
- Published by Wiley in International Journal of Energy Research
- Vol. 46 (4) , 3782-3809
Biomass‐based heterogeneous catalysts for biodiesel production: A comprehensive review
- 5 November 2021
- Published by Wiley in International Journal of Energy Research
- Vol. 46 (4) , 3782-3809
Biomass‐based heterogeneous catalysts for biodiesel production: A comprehensive review
- 12 October 2017
- Published by Wiley in Chemical Engineering & Technology
- Vol. 40 (11) , 2104-2112
Thermochemical Biomass Conversion for Decentralized Power Generation with the Inverse Brayton Cycle
- 12 October 2017
- Published by Wiley in Chemical Engineering & Technology
- Vol. 40 (11) , 2104-2112
Thermochemical Biomass Conversion for Decentralized Power Generation with the Inverse Brayton Cycle