XQXianping Qin

Xianping Qin

*This is an algorithmically generated author record based on publicly available information.

Xianping Qin has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sound speed profile-free GNSS-acoustic positioning using extended cubic spline function

    by Xianping Qin, Yuanxi Yang, Bijiao Sun

  • A Robust Method to Estimate the Coordinates of Seafloor Stations by Direct-Path Ranging

    by Xianping Qin, Yuanxi Yang, Bijiao Sun

    The ranges derived from acoustic measurements between seafloor stations are relatively more accurate compared with those derived from the sea surface vessel transducer to the seafloor transponders, because measurements through mixed water layers will be affected by complex acoustic range errors. Coordinates of seafloor stations can be improved by the direct-path acoustic ranging. Systematic errors in acoustic rangings, however, will significantly deteriorate the accuracy of vertical coordinates. In order to mitigate the effects of these systematic errors (e.g., acoustic ray bending and sound speed variation errors in acoustic measurements on the seafloor station location parameters), the observation model needs to be finely constructed. First, a new observation model with acoustic ray bending and sound speed bias parameters is established. Then, using a seafloor geodetic network with four moored stations at a depth of about 3000 m in the South China Sea, the significance of the acoustic ray bending parameter is tested. The results show that (1) the acoustic ray bending parameter is significant at the 90% confidence level, which means that the acoustic ray bending error in the seafloor geodetic network is not negligible; (2) by estimating the coefficient of acoustic ray bending, the influence of the acoustic ray bending error on the vertical coordinate components can be significantly mitigated; our model improves the accuracy of the seafloor stations’ position with differences in the horizontal coordinate components less than 0.1 cm between the two-dimensional adjustment and three-dimensional adjustment, and also improves the vertical coordinate component to uncertainty less than 3.0 cm; (3) the relative movement between the moored stations is less than 50 cm, and the horizontal movement is larger than the vertical movement.


  • Open Access

    Precise Relative Orbit Determination for Chinese TH-2 Satellite Formation Using Onboard GPS and BDS2 Observations

    by Bin Yi, Defeng Gu, Kai Shao, Bing Ju, Houzhe Zhang, Xianping Qin, Xiaojun Duan, Zhiyong Huang

    TH-2 is China’s first short-range satellite formation system used to realize interferometric synthetic aperture radar (InSAR) technology. In order to achieve the mission goal of InSAR processing, the relative orbit must be determined with high accuracy. In this study, the precise relative orbit determination (PROD) for TH-2 based on global positioning system (GPS), second-generation BeiDou navagation satellite system (BDS2), and GPS + BDS2 observations was performed. First, the performance of onboard GPS and BDS2 measurements were assessed by analyzing the available data, code multipath errors and noise levels of carrier phase observations. The differences between the National University of Defense Technology (NDT) and the Xi’an Research Institute of Surveying and Mapping (CHS) baseline solutions exhibited an RMS of 1.48 mm outside maneuver periods. The GPS-based orbit was used as a reference orbit to evaluate the BDS2-based orbit and the GPS + BDS2-based orbit. It is the first time BDS2 has been applied to the PROD of low Earth orbit (LEO) satellite formation. The results showed that the root mean square (RMS) of difference between the PROD results using GPS and BDS2 measurements in 3D components was 2.89 mm in the Asia-Pacific region. We assigned different weights to geostationary Earth orbit (GEO) satellites to illustrate the impact of GEO satellites on PROD, and the accuracy of PROD was improved to 7.08 mm with the GEO weighting strategy. Finally, relative orbits were derived from the combined GPS and BDS2 data. When BDS2 was added on the basis of GPS, the average number of visible navigation satellites from TH-2A and TH-2B improved from 7.5 to 9.5. The RMS of the difference between the GPS + BDS2-based orbit and the GPS-based orbit was about 1.2 mm in 3D. The overlap comparison results showed that the combined orbit consistencies were below 1 mm in the radial (R), along-track (T), and cross-track (N) directions. Furthermore, when BDS2 co-worked with GPS, the average of the ambiguity dilution of precision (ADOP) reduced from 0.160 cycle to 0.153 cycle, which was about a 4.4% reduction. The experimental results indicate that millimeter-level PROD results for TH-2 satellite formation can be obtained by using onboard GPS and BDS2 observations, and multi-GNSS can further improve the accuracy and reliability of PROD.